misc/at24: parse device tree data
authorWolfram Sang <w.sang@pengutronix.de>
Wed, 17 Nov 2010 12:00:48 +0000 (13:00 +0100)
committerGrant Likely <grant.likely@secretlab.ca>
Fri, 24 Dec 2010 09:13:36 +0000 (02:13 -0700)
Information about the pagesize and read-only-status may also come from
the devicetree. Parse this data, too, and act accordingly. While we are
here, change the initialization printout a bit. write_max is useful to
know to detect performance bottlenecks, the rest is superfluous.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Documentation/powerpc/dts-bindings/eeprom.txt [new file with mode: 0644]
drivers/misc/eeprom/at24.c

diff --git a/Documentation/powerpc/dts-bindings/eeprom.txt b/Documentation/powerpc/dts-bindings/eeprom.txt
new file mode 100644 (file)
index 0000000..4342c10
--- /dev/null
@@ -0,0 +1,28 @@
+EEPROMs (I2C)
+
+Required properties:
+
+  - compatible : should be "<manufacturer>,<type>"
+                If there is no specific driver for <manufacturer>, a generic
+                driver based on <type> is selected. Possible types are:
+                24c00, 24c01, 24c02, 24c04, 24c08, 24c16, 24c32, 24c64,
+                24c128, 24c256, 24c512, 24c1024, spd
+
+  - reg : the I2C address of the EEPROM
+
+Optional properties:
+
+  - pagesize : the length of the pagesize for writing. Please consult the
+               manual of your device, that value varies a lot. A wrong value
+              may result in data loss! If not specified, a safety value of
+              '1' is used which will be very slow.
+
+  - read-only: this parameterless property disables writes to the eeprom
+
+Example:
+
+eeprom@52 {
+       compatible = "atmel,24c32";
+       reg = <0x52>;
+       pagesize = <32>;
+};
index 559b0b3c16c379584be01a08db209e2437549a04..3a53efc28821a1c92206928f20dbb7e6ddb406d0 100644 (file)
@@ -20,6 +20,7 @@
 #include <linux/log2.h>
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
+#include <linux/of.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 
@@ -457,6 +458,27 @@ static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf,
 
 /*-------------------------------------------------------------------------*/
 
+#ifdef CONFIG_OF
+static void at24_get_ofdata(struct i2c_client *client,
+               struct at24_platform_data *chip)
+{
+       const __be32 *val;
+       struct device_node *node = client->dev.of_node;
+
+       if (node) {
+               if (of_get_property(node, "read-only", NULL))
+                       chip->flags |= AT24_FLAG_READONLY;
+               val = of_get_property(node, "pagesize", NULL);
+               if (val)
+                       chip->page_size = be32_to_cpup(val);
+       }
+}
+#else
+static void at24_get_ofdata(struct i2c_client *client,
+               struct at24_platform_data *chip)
+{ }
+#endif /* CONFIG_OF */
+
 static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
        struct at24_platform_data chip;
@@ -485,6 +507,9 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
                 */
                chip.page_size = 1;
 
+               /* update chipdata if OF is present */
+               at24_get_ofdata(client, &chip);
+
                chip.setup = NULL;
                chip.context = NULL;
        }
@@ -597,19 +622,15 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
        i2c_set_clientdata(client, at24);
 
-       dev_info(&client->dev, "%zu byte %s EEPROM %s\n",
+       dev_info(&client->dev, "%zu byte %s EEPROM, %s, %u bytes/write\n",
                at24->bin.size, client->name,
-               writable ? "(writable)" : "(read-only)");
+               writable ? "writable" : "read-only", at24->write_max);
        if (use_smbus == I2C_SMBUS_WORD_DATA ||
            use_smbus == I2C_SMBUS_BYTE_DATA) {
                dev_notice(&client->dev, "Falling back to %s reads, "
                           "performance will suffer\n", use_smbus ==
                           I2C_SMBUS_WORD_DATA ? "word" : "byte");
        }
-       dev_dbg(&client->dev,
-               "page_size %d, num_addresses %d, write_max %d, use_smbus %d\n",
-               chip.page_size, num_addresses,
-               at24->write_max, use_smbus);
 
        /* export data to kernel code */
        if (chip.setup)