ifeq ($(CONFIG_X86_32),y)
include ${srctree}/arch/x86/boot/compressed/Makefile_32
else
-include ${srctree}/arch/x86_64/boot/compressed/Makefile_64
+include ${srctree}/arch/x86/boot/compressed/Makefile_64
endif
--- /dev/null
+#
+# linux/arch/x86/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+targets := vmlinux vmlinux.bin vmlinux.bin.gz head_64.o misc_64.o piggy.o
+
+CFLAGS := -m64 -D__KERNEL__ $(LINUXINCLUDE) -O2 \
+ -fno-strict-aliasing -fPIC -mcmodel=small \
+ $(call cc-option, -ffreestanding) \
+ $(call cc-option, -fno-stack-protector)
+AFLAGS := $(CFLAGS) -D__ASSEMBLY__
+LDFLAGS := -m elf_x86_64
+
+LDFLAGS_vmlinux := -T
+$(obj)/vmlinux: $(src)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o $(obj)/piggy.o FORCE
+ $(call if_changed,ld)
+ @:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
+
+$(obj)/piggy.o: $(obj)/vmlinux_64.scr $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,ld)
--- /dev/null
+/*
+ * linux/boot/head.S
+ *
+ * Copyright (C) 1991, 1992, 1993 Linus Torvalds
+ */
+
+/*
+ * head.S contains the 32-bit startup code.
+ *
+ * NOTE!!! Startup happens at absolute address 0x00001000, which is also where
+ * the page directory will exist. The startup code will be overwritten by
+ * the page directory. [According to comments etc elsewhere on a compressed
+ * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
+ *
+ * Page 0 is deliberately kept safe, since System Management Mode code in
+ * laptops may need to access the BIOS data stored there. This is also
+ * useful for future device drivers that either access the BIOS via VM86
+ * mode.
+ */
+
+/*
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ */
+.code32
+.text
+
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/msr.h>
+
+.section ".text.head"
+ .code32
+ .globl startup_32
+
+startup_32:
+ cld
+ cli
+ movl $(__KERNEL_DS), %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %ss
+
+/* Calculate the delta between where we were compiled to run
+ * at and where we were actually loaded at. This can only be done
+ * with a short local call on x86. Nothing else will tell us what
+ * address we are running at. The reserved chunk of the real-mode
+ * data at 0x1e4 (defined as a scratch field) are used as the stack
+ * for this calculation. Only 4 bytes are needed.
+ */
+ leal (0x1e4+4)(%esi), %esp
+ call 1f
+1: popl %ebp
+ subl $1b, %ebp
+
+/* setup a stack and make sure cpu supports long mode. */
+ movl $user_stack_end, %eax
+ addl %ebp, %eax
+ movl %eax, %esp
+
+ call verify_cpu
+ testl %eax, %eax
+ jnz no_longmode
+
+/* Compute the delta between where we were compiled to run at
+ * and where the code will actually run at.
+ */
+/* %ebp contains the address we are loaded at by the boot loader and %ebx
+ * contains the address where we should move the kernel image temporarily
+ * for safe in-place decompression.
+ */
+
+#ifdef CONFIG_RELOCATABLE
+ movl %ebp, %ebx
+ addl $(LARGE_PAGE_SIZE -1), %ebx
+ andl $LARGE_PAGE_MASK, %ebx
+#else
+ movl $CONFIG_PHYSICAL_START, %ebx
+#endif
+
+ /* Replace the compressed data size with the uncompressed size */
+ subl input_len(%ebp), %ebx
+ movl output_len(%ebp), %eax
+ addl %eax, %ebx
+ /* Add 8 bytes for every 32K input block */
+ shrl $12, %eax
+ addl %eax, %ebx
+ /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
+ addl $(32768 + 18 + 4095), %ebx
+ andl $~4095, %ebx
+
+/*
+ * Prepare for entering 64 bit mode
+ */
+
+ /* Load new GDT with the 64bit segments using 32bit descriptor */
+ leal gdt(%ebp), %eax
+ movl %eax, gdt+2(%ebp)
+ lgdt gdt(%ebp)
+
+ /* Enable PAE mode */
+ xorl %eax, %eax
+ orl $(1 << 5), %eax
+ movl %eax, %cr4
+
+ /*
+ * Build early 4G boot pagetable
+ */
+ /* Initialize Page tables to 0*/
+ leal pgtable(%ebx), %edi
+ xorl %eax, %eax
+ movl $((4096*6)/4), %ecx
+ rep stosl
+
+ /* Build Level 4 */
+ leal pgtable + 0(%ebx), %edi
+ leal 0x1007 (%edi), %eax
+ movl %eax, 0(%edi)
+
+ /* Build Level 3 */
+ leal pgtable + 0x1000(%ebx), %edi
+ leal 0x1007(%edi), %eax
+ movl $4, %ecx
+1: movl %eax, 0x00(%edi)
+ addl $0x00001000, %eax
+ addl $8, %edi
+ decl %ecx
+ jnz 1b
+
+ /* Build Level 2 */
+ leal pgtable + 0x2000(%ebx), %edi
+ movl $0x00000183, %eax
+ movl $2048, %ecx
+1: movl %eax, 0(%edi)
+ addl $0x00200000, %eax
+ addl $8, %edi
+ decl %ecx
+ jnz 1b
+
+ /* Enable the boot page tables */
+ leal pgtable(%ebx), %eax
+ movl %eax, %cr3
+
+ /* Enable Long mode in EFER (Extended Feature Enable Register) */
+ movl $MSR_EFER, %ecx
+ rdmsr
+ btsl $_EFER_LME, %eax
+ wrmsr
+
+ /* Setup for the jump to 64bit mode
+ *
+ * When the jump is performend we will be in long mode but
+ * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
+ * (and in turn EFER.LMA = 1). To jump into 64bit mode we use
+ * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
+ * We place all of the values on our mini stack so lret can
+ * used to perform that far jump.
+ */
+ pushl $__KERNEL_CS
+ leal startup_64(%ebp), %eax
+ pushl %eax
+
+ /* Enter paged protected Mode, activating Long Mode */
+ movl $0x80000001, %eax /* Enable Paging and Protected mode */
+ movl %eax, %cr0
+
+ /* Jump from 32bit compatibility mode into 64bit mode. */
+ lret
+
+no_longmode:
+ /* This isn't an x86-64 CPU so hang */
+1:
+ hlt
+ jmp 1b
+
+#include "../../../x86_64/kernel/verify_cpu_64.S"
+
+ /* Be careful here startup_64 needs to be at a predictable
+ * address so I can export it in an ELF header. Bootloaders
+ * should look at the ELF header to find this address, as
+ * it may change in the future.
+ */
+ .code64
+ .org 0x200
+ENTRY(startup_64)
+ /* We come here either from startup_32 or directly from a
+ * 64bit bootloader. If we come here from a bootloader we depend on
+ * an identity mapped page table being provied that maps our
+ * entire text+data+bss and hopefully all of memory.
+ */
+
+ /* Setup data segments. */
+ xorl %eax, %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %ss
+ movl %eax, %fs
+ movl %eax, %gs
+ lldt %ax
+ movl $0x20, %eax
+ ltr %ax
+
+ /* Compute the decompressed kernel start address. It is where
+ * we were loaded at aligned to a 2M boundary. %rbp contains the
+ * decompressed kernel start address.
+ *
+ * If it is a relocatable kernel then decompress and run the kernel
+ * from load address aligned to 2MB addr, otherwise decompress and
+ * run the kernel from CONFIG_PHYSICAL_START
+ */
+
+ /* Start with the delta to where the kernel will run at. */
+#ifdef CONFIG_RELOCATABLE
+ leaq startup_32(%rip) /* - $startup_32 */, %rbp
+ addq $(LARGE_PAGE_SIZE - 1), %rbp
+ andq $LARGE_PAGE_MASK, %rbp
+ movq %rbp, %rbx
+#else
+ movq $CONFIG_PHYSICAL_START, %rbp
+ movq %rbp, %rbx
+#endif
+
+ /* Replace the compressed data size with the uncompressed size */
+ movl input_len(%rip), %eax
+ subq %rax, %rbx
+ movl output_len(%rip), %eax
+ addq %rax, %rbx
+ /* Add 8 bytes for every 32K input block */
+ shrq $12, %rax
+ addq %rax, %rbx
+ /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
+ addq $(32768 + 18 + 4095), %rbx
+ andq $~4095, %rbx
+
+/* Copy the compressed kernel to the end of our buffer
+ * where decompression in place becomes safe.
+ */
+ leaq _end(%rip), %r8
+ leaq _end(%rbx), %r9
+ movq $_end /* - $startup_32 */, %rcx
+1: subq $8, %r8
+ subq $8, %r9
+ movq 0(%r8), %rax
+ movq %rax, 0(%r9)
+ subq $8, %rcx
+ jnz 1b
+
+/*
+ * Jump to the relocated address.
+ */
+ leaq relocated(%rbx), %rax
+ jmp *%rax
+
+.section ".text"
+relocated:
+
+/*
+ * Clear BSS
+ */
+ xorq %rax, %rax
+ leaq _edata(%rbx), %rdi
+ leaq _end(%rbx), %rcx
+ subq %rdi, %rcx
+ cld
+ rep
+ stosb
+
+ /* Setup the stack */
+ leaq user_stack_end(%rip), %rsp
+
+ /* zero EFLAGS after setting rsp */
+ pushq $0
+ popfq
+
+/*
+ * Do the decompression, and jump to the new kernel..
+ */
+ pushq %rsi # Save the real mode argument
+ movq %rsi, %rdi # real mode address
+ leaq _heap(%rip), %rsi # _heap
+ leaq input_data(%rip), %rdx # input_data
+ movl input_len(%rip), %eax
+ movq %rax, %rcx # input_len
+ movq %rbp, %r8 # output
+ call decompress_kernel
+ popq %rsi
+
+
+/*
+ * Jump to the decompressed kernel.
+ */
+ jmp *%rbp
+
+ .data
+gdt:
+ .word gdt_end - gdt
+ .long gdt
+ .word 0
+ .quad 0x0000000000000000 /* NULL descriptor */
+ .quad 0x00af9a000000ffff /* __KERNEL_CS */
+ .quad 0x00cf92000000ffff /* __KERNEL_DS */
+ .quad 0x0080890000000000 /* TS descriptor */
+ .quad 0x0000000000000000 /* TS continued */
+gdt_end:
+ .bss
+/* Stack for uncompression */
+ .balign 4
+user_stack:
+ .fill 4096,4,0
+user_stack_end:
--- /dev/null
+/*
+ * misc.c
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ * puts by Nick Holloway 1993, better puts by Martin Mares 1995
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ */
+
+#define _LINUX_STRING_H_ 1
+#define __LINUX_BITMAP_H 1
+
+#include <linux/linkage.h>
+#include <linux/screen_info.h>
+#include <asm/io.h>
+#include <asm/page.h>
+
+/* WARNING!!
+ * This code is compiled with -fPIC and it is relocated dynamically
+ * at run time, but no relocation processing is performed.
+ * This means that it is not safe to place pointers in static structures.
+ */
+
+/*
+ * Getting to provable safe in place decompression is hard.
+ * Worst case behaviours need to be analized.
+ * Background information:
+ *
+ * The file layout is:
+ * magic[2]
+ * method[1]
+ * flags[1]
+ * timestamp[4]
+ * extraflags[1]
+ * os[1]
+ * compressed data blocks[N]
+ * crc[4] orig_len[4]
+ *
+ * resulting in 18 bytes of non compressed data overhead.
+ *
+ * Files divided into blocks
+ * 1 bit (last block flag)
+ * 2 bits (block type)
+ *
+ * 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved.
+ * The smallest block type encoding is always used.
+ *
+ * stored:
+ * 32 bits length in bytes.
+ *
+ * fixed:
+ * magic fixed tree.
+ * symbols.
+ *
+ * dynamic:
+ * dynamic tree encoding.
+ * symbols.
+ *
+ *
+ * The buffer for decompression in place is the length of the
+ * uncompressed data, plus a small amount extra to keep the algorithm safe.
+ * The compressed data is placed at the end of the buffer. The output
+ * pointer is placed at the start of the buffer and the input pointer
+ * is placed where the compressed data starts. Problems will occur
+ * when the output pointer overruns the input pointer.
+ *
+ * The output pointer can only overrun the input pointer if the input
+ * pointer is moving faster than the output pointer. A condition only
+ * triggered by data whose compressed form is larger than the uncompressed
+ * form.
+ *
+ * The worst case at the block level is a growth of the compressed data
+ * of 5 bytes per 32767 bytes.
+ *
+ * The worst case internal to a compressed block is very hard to figure.
+ * The worst case can at least be boundined by having one bit that represents
+ * 32764 bytes and then all of the rest of the bytes representing the very
+ * very last byte.
+ *
+ * All of which is enough to compute an amount of extra data that is required
+ * to be safe. To avoid problems at the block level allocating 5 extra bytes
+ * per 32767 bytes of data is sufficient. To avoind problems internal to a block
+ * adding an extra 32767 bytes (the worst case uncompressed block size) is
+ * sufficient, to ensure that in the worst case the decompressed data for
+ * block will stop the byte before the compressed data for a block begins.
+ * To avoid problems with the compressed data's meta information an extra 18
+ * bytes are needed. Leading to the formula:
+ *
+ * extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size.
+ *
+ * Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
+ * Adding 32768 instead of 32767 just makes for round numbers.
+ * Adding the decompressor_size is necessary as it musht live after all
+ * of the data as well. Last I measured the decompressor is about 14K.
+ * 10K of actuall data and 4K of bss.
+ *
+ */
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args) args
+#define STATIC static
+
+#undef memset
+#undef memcpy
+#define memzero(s, n) memset ((s), 0, (n))
+
+typedef unsigned char uch;
+typedef unsigned short ush;
+typedef unsigned long ulg;
+
+#define WSIZE 0x80000000 /* Window size must be at least 32k,
+ * and a power of two
+ * We don't actually have a window just
+ * a huge output buffer so I report
+ * a 2G windows size, as that should
+ * always be larger than our output buffer.
+ */
+
+static uch *inbuf; /* input buffer */
+static uch *window; /* Sliding window buffer, (and final output buffer) */
+
+static unsigned insize; /* valid bytes in inbuf */
+static unsigned inptr; /* index of next byte to be processed in inbuf */
+static unsigned outcnt; /* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
+#define COMMENT 0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
+#define RESERVED 0xC0 /* bit 6,7: reserved */
+
+#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
+
+/* Diagnostic functions */
+#ifdef DEBUG
+# define Assert(cond,msg) {if(!(cond)) error(msg);}
+# define Trace(x) fprintf x
+# define Tracev(x) {if (verbose) fprintf x ;}
+# define Tracevv(x) {if (verbose>1) fprintf x ;}
+# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+# define Assert(cond,msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c,x)
+# define Tracecv(c,x)
+#endif
+
+static int fill_inbuf(void);
+static void flush_window(void);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+static unsigned char *real_mode; /* Pointer to real-mode data */
+
+#define RM_EXT_MEM_K (*(unsigned short *)(real_mode + 0x2))
+#ifndef STANDARD_MEMORY_BIOS_CALL
+#define RM_ALT_MEM_K (*(unsigned long *)(real_mode + 0x1e0))
+#endif
+#define RM_SCREEN_INFO (*(struct screen_info *)(real_mode+0))
+
+extern unsigned char input_data[];
+extern int input_len;
+
+static long bytes_out = 0;
+
+static void *malloc(int size);
+static void free(void *where);
+
+static void *memset(void *s, int c, unsigned n);
+static void *memcpy(void *dest, const void *src, unsigned n);
+
+static void putstr(const char *);
+
+static long free_mem_ptr;
+static long free_mem_end_ptr;
+
+#define HEAP_SIZE 0x7000
+
+static char *vidmem = (char *)0xb8000;
+static int vidport;
+static int lines, cols;
+
+#include "../../../../lib/inflate.c"
+
+static void *malloc(int size)
+{
+ void *p;
+
+ if (size <0) error("Malloc error");
+ if (free_mem_ptr <= 0) error("Memory error");
+
+ free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
+
+ p = (void *)free_mem_ptr;
+ free_mem_ptr += size;
+
+ if (free_mem_ptr >= free_mem_end_ptr)
+ error("Out of memory");
+
+ return p;
+}
+
+static void free(void *where)
+{ /* Don't care */
+}
+
+static void gzip_mark(void **ptr)
+{
+ *ptr = (void *) free_mem_ptr;
+}
+
+static void gzip_release(void **ptr)
+{
+ free_mem_ptr = (long) *ptr;
+}
+
+static void scroll(void)
+{
+ int i;
+
+ memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 );
+ for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 )
+ vidmem[i] = ' ';
+}
+
+static void putstr(const char *s)
+{
+ int x,y,pos;
+ char c;
+
+ x = RM_SCREEN_INFO.orig_x;
+ y = RM_SCREEN_INFO.orig_y;
+
+ while ( ( c = *s++ ) != '\0' ) {
+ if ( c == '\n' ) {
+ x = 0;
+ if ( ++y >= lines ) {
+ scroll();
+ y--;
+ }
+ } else {
+ vidmem [ ( x + cols * y ) * 2 ] = c;
+ if ( ++x >= cols ) {
+ x = 0;
+ if ( ++y >= lines ) {
+ scroll();
+ y--;
+ }
+ }
+ }
+ }
+
+ RM_SCREEN_INFO.orig_x = x;
+ RM_SCREEN_INFO.orig_y = y;
+
+ pos = (x + cols * y) * 2; /* Update cursor position */
+ outb_p(14, vidport);
+ outb_p(0xff & (pos >> 9), vidport+1);
+ outb_p(15, vidport);
+ outb_p(0xff & (pos >> 1), vidport+1);
+}
+
+static void* memset(void* s, int c, unsigned n)
+{
+ int i;
+ char *ss = (char*)s;
+
+ for (i=0;i<n;i++) ss[i] = c;
+ return s;
+}
+
+static void* memcpy(void* dest, const void* src, unsigned n)
+{
+ int i;
+ char *d = (char *)dest, *s = (char *)src;
+
+ for (i=0;i<n;i++) d[i] = s[i];
+ return dest;
+}
+
+/* ===========================================================================
+ * Fill the input buffer. This is called only when the buffer is empty
+ * and at least one byte is really needed.
+ */
+static int fill_inbuf(void)
+{
+ error("ran out of input data");
+ return 0;
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+static void flush_window(void)
+{
+ /* With my window equal to my output buffer
+ * I only need to compute the crc here.
+ */
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, ch;
+
+ in = window;
+ for (n = 0; n < outcnt; n++) {
+ ch = *in++;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ outcnt = 0;
+}
+
+static void error(char *x)
+{
+ putstr("\n\n");
+ putstr(x);
+ putstr("\n\n -- System halted");
+
+ while(1); /* Halt */
+}
+
+asmlinkage void decompress_kernel(void *rmode, unsigned long heap,
+ uch *input_data, unsigned long input_len, uch *output)
+{
+ real_mode = rmode;
+
+ if (RM_SCREEN_INFO.orig_video_mode == 7) {
+ vidmem = (char *) 0xb0000;
+ vidport = 0x3b4;
+ } else {
+ vidmem = (char *) 0xb8000;
+ vidport = 0x3d4;
+ }
+
+ lines = RM_SCREEN_INFO.orig_video_lines;
+ cols = RM_SCREEN_INFO.orig_video_cols;
+
+ window = output; /* Output buffer (Normally at 1M) */
+ free_mem_ptr = heap; /* Heap */
+ free_mem_end_ptr = heap + HEAP_SIZE;
+ inbuf = input_data; /* Input buffer */
+ insize = input_len;
+ inptr = 0;
+
+ if ((ulg)output & (__KERNEL_ALIGN - 1))
+ error("Destination address not 2M aligned");
+ if ((ulg)output >= 0xffffffffffUL)
+ error("Destination address too large");
+
+ makecrc();
+ putstr(".\nDecompressing Linux...");
+ gunzip();
+ putstr("done.\nBooting the kernel.\n");
+ return;
+}
--- /dev/null
+OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
+OUTPUT_ARCH(i386:x86-64)
+ENTRY(startup_64)
+SECTIONS
+{
+ /* Be careful parts of head.S assume startup_32 is at
+ * address 0.
+ */
+ . = 0;
+ .text : {
+ _head = . ;
+ *(.text.head)
+ _ehead = . ;
+ *(.text.compressed)
+ _text = .; /* Text */
+ *(.text)
+ *(.text.*)
+ _etext = . ;
+ }
+ .rodata : {
+ _rodata = . ;
+ *(.rodata) /* read-only data */
+ *(.rodata.*)
+ _erodata = . ;
+ }
+ .data : {
+ _data = . ;
+ *(.data)
+ *(.data.*)
+ _edata = . ;
+ }
+ .bss : {
+ _bss = . ;
+ *(.bss)
+ *(.bss.*)
+ *(COMMON)
+ . = ALIGN(8);
+ _end = . ;
+ . = ALIGN(4096);
+ pgtable = . ;
+ . = . + 4096 * 6;
+ _heap = .;
+ }
+}
--- /dev/null
+SECTIONS
+{
+ .text.compressed : {
+ input_len = .;
+ LONG(input_data_end - input_data) input_data = .;
+ *(.data)
+ output_len = . - 4;
+ input_data_end = .;
+ }
+}
+++ /dev/null
-ifeq ($(CONFIG_X86_32),y)
-include ${srctree}/arch/x86/boot/compressed/Makefile_32
-else
-include ${srctree}/arch/x86_64/boot/compressed/Makefile_64
-endif
+++ /dev/null
-#
-# linux/arch/x86_64/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-targets := vmlinux vmlinux.bin vmlinux.bin.gz head_64.o misc_64.o piggy.o
-
-CFLAGS := -m64 -D__KERNEL__ $(LINUXINCLUDE) -O2 \
- -fno-strict-aliasing -fPIC -mcmodel=small \
- $(call cc-option, -ffreestanding) \
- $(call cc-option, -fno-stack-protector)
-AFLAGS := $(CFLAGS) -D__ASSEMBLY__
-LDFLAGS := -m elf_x86_64
-
-LDFLAGS_vmlinux := -T
-$(obj)/vmlinux: $(src)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o $(obj)/piggy.o FORCE
- $(call if_changed,ld)
- @:
-
-$(obj)/vmlinux.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
-
-$(obj)/piggy.o: $(obj)/vmlinux_64.scr $(obj)/vmlinux.bin.gz FORCE
- $(call if_changed,ld)
+++ /dev/null
-/*
- * linux/boot/head.S
- *
- * Copyright (C) 1991, 1992, 1993 Linus Torvalds
- */
-
-/*
- * head.S contains the 32-bit startup code.
- *
- * NOTE!!! Startup happens at absolute address 0x00001000, which is also where
- * the page directory will exist. The startup code will be overwritten by
- * the page directory. [According to comments etc elsewhere on a compressed
- * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
- *
- * Page 0 is deliberately kept safe, since System Management Mode code in
- * laptops may need to access the BIOS data stored there. This is also
- * useful for future device drivers that either access the BIOS via VM86
- * mode.
- */
-
-/*
- * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
- */
-.code32
-.text
-
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/msr.h>
-
-.section ".text.head"
- .code32
- .globl startup_32
-
-startup_32:
- cld
- cli
- movl $(__KERNEL_DS), %eax
- movl %eax, %ds
- movl %eax, %es
- movl %eax, %ss
-
-/* Calculate the delta between where we were compiled to run
- * at and where we were actually loaded at. This can only be done
- * with a short local call on x86. Nothing else will tell us what
- * address we are running at. The reserved chunk of the real-mode
- * data at 0x1e4 (defined as a scratch field) are used as the stack
- * for this calculation. Only 4 bytes are needed.
- */
- leal (0x1e4+4)(%esi), %esp
- call 1f
-1: popl %ebp
- subl $1b, %ebp
-
-/* setup a stack and make sure cpu supports long mode. */
- movl $user_stack_end, %eax
- addl %ebp, %eax
- movl %eax, %esp
-
- call verify_cpu
- testl %eax, %eax
- jnz no_longmode
-
-/* Compute the delta between where we were compiled to run at
- * and where the code will actually run at.
- */
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
- * contains the address where we should move the kernel image temporarily
- * for safe in-place decompression.
- */
-
-#ifdef CONFIG_RELOCATABLE
- movl %ebp, %ebx
- addl $(LARGE_PAGE_SIZE -1), %ebx
- andl $LARGE_PAGE_MASK, %ebx
-#else
- movl $CONFIG_PHYSICAL_START, %ebx
-#endif
-
- /* Replace the compressed data size with the uncompressed size */
- subl input_len(%ebp), %ebx
- movl output_len(%ebp), %eax
- addl %eax, %ebx
- /* Add 8 bytes for every 32K input block */
- shrl $12, %eax
- addl %eax, %ebx
- /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
- addl $(32768 + 18 + 4095), %ebx
- andl $~4095, %ebx
-
-/*
- * Prepare for entering 64 bit mode
- */
-
- /* Load new GDT with the 64bit segments using 32bit descriptor */
- leal gdt(%ebp), %eax
- movl %eax, gdt+2(%ebp)
- lgdt gdt(%ebp)
-
- /* Enable PAE mode */
- xorl %eax, %eax
- orl $(1 << 5), %eax
- movl %eax, %cr4
-
- /*
- * Build early 4G boot pagetable
- */
- /* Initialize Page tables to 0*/
- leal pgtable(%ebx), %edi
- xorl %eax, %eax
- movl $((4096*6)/4), %ecx
- rep stosl
-
- /* Build Level 4 */
- leal pgtable + 0(%ebx), %edi
- leal 0x1007 (%edi), %eax
- movl %eax, 0(%edi)
-
- /* Build Level 3 */
- leal pgtable + 0x1000(%ebx), %edi
- leal 0x1007(%edi), %eax
- movl $4, %ecx
-1: movl %eax, 0x00(%edi)
- addl $0x00001000, %eax
- addl $8, %edi
- decl %ecx
- jnz 1b
-
- /* Build Level 2 */
- leal pgtable + 0x2000(%ebx), %edi
- movl $0x00000183, %eax
- movl $2048, %ecx
-1: movl %eax, 0(%edi)
- addl $0x00200000, %eax
- addl $8, %edi
- decl %ecx
- jnz 1b
-
- /* Enable the boot page tables */
- leal pgtable(%ebx), %eax
- movl %eax, %cr3
-
- /* Enable Long mode in EFER (Extended Feature Enable Register) */
- movl $MSR_EFER, %ecx
- rdmsr
- btsl $_EFER_LME, %eax
- wrmsr
-
- /* Setup for the jump to 64bit mode
- *
- * When the jump is performend we will be in long mode but
- * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
- * (and in turn EFER.LMA = 1). To jump into 64bit mode we use
- * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
- * We place all of the values on our mini stack so lret can
- * used to perform that far jump.
- */
- pushl $__KERNEL_CS
- leal startup_64(%ebp), %eax
- pushl %eax
-
- /* Enter paged protected Mode, activating Long Mode */
- movl $0x80000001, %eax /* Enable Paging and Protected mode */
- movl %eax, %cr0
-
- /* Jump from 32bit compatibility mode into 64bit mode. */
- lret
-
-no_longmode:
- /* This isn't an x86-64 CPU so hang */
-1:
- hlt
- jmp 1b
-
-#include "../../kernel/verify_cpu_64.S"
-
- /* Be careful here startup_64 needs to be at a predictable
- * address so I can export it in an ELF header. Bootloaders
- * should look at the ELF header to find this address, as
- * it may change in the future.
- */
- .code64
- .org 0x200
-ENTRY(startup_64)
- /* We come here either from startup_32 or directly from a
- * 64bit bootloader. If we come here from a bootloader we depend on
- * an identity mapped page table being provied that maps our
- * entire text+data+bss and hopefully all of memory.
- */
-
- /* Setup data segments. */
- xorl %eax, %eax
- movl %eax, %ds
- movl %eax, %es
- movl %eax, %ss
- movl %eax, %fs
- movl %eax, %gs
- lldt %ax
- movl $0x20, %eax
- ltr %ax
-
- /* Compute the decompressed kernel start address. It is where
- * we were loaded at aligned to a 2M boundary. %rbp contains the
- * decompressed kernel start address.
- *
- * If it is a relocatable kernel then decompress and run the kernel
- * from load address aligned to 2MB addr, otherwise decompress and
- * run the kernel from CONFIG_PHYSICAL_START
- */
-
- /* Start with the delta to where the kernel will run at. */
-#ifdef CONFIG_RELOCATABLE
- leaq startup_32(%rip) /* - $startup_32 */, %rbp
- addq $(LARGE_PAGE_SIZE - 1), %rbp
- andq $LARGE_PAGE_MASK, %rbp
- movq %rbp, %rbx
-#else
- movq $CONFIG_PHYSICAL_START, %rbp
- movq %rbp, %rbx
-#endif
-
- /* Replace the compressed data size with the uncompressed size */
- movl input_len(%rip), %eax
- subq %rax, %rbx
- movl output_len(%rip), %eax
- addq %rax, %rbx
- /* Add 8 bytes for every 32K input block */
- shrq $12, %rax
- addq %rax, %rbx
- /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
- addq $(32768 + 18 + 4095), %rbx
- andq $~4095, %rbx
-
-/* Copy the compressed kernel to the end of our buffer
- * where decompression in place becomes safe.
- */
- leaq _end(%rip), %r8
- leaq _end(%rbx), %r9
- movq $_end /* - $startup_32 */, %rcx
-1: subq $8, %r8
- subq $8, %r9
- movq 0(%r8), %rax
- movq %rax, 0(%r9)
- subq $8, %rcx
- jnz 1b
-
-/*
- * Jump to the relocated address.
- */
- leaq relocated(%rbx), %rax
- jmp *%rax
-
-.section ".text"
-relocated:
-
-/*
- * Clear BSS
- */
- xorq %rax, %rax
- leaq _edata(%rbx), %rdi
- leaq _end(%rbx), %rcx
- subq %rdi, %rcx
- cld
- rep
- stosb
-
- /* Setup the stack */
- leaq user_stack_end(%rip), %rsp
-
- /* zero EFLAGS after setting rsp */
- pushq $0
- popfq
-
-/*
- * Do the decompression, and jump to the new kernel..
- */
- pushq %rsi # Save the real mode argument
- movq %rsi, %rdi # real mode address
- leaq _heap(%rip), %rsi # _heap
- leaq input_data(%rip), %rdx # input_data
- movl input_len(%rip), %eax
- movq %rax, %rcx # input_len
- movq %rbp, %r8 # output
- call decompress_kernel
- popq %rsi
-
-
-/*
- * Jump to the decompressed kernel.
- */
- jmp *%rbp
-
- .data
-gdt:
- .word gdt_end - gdt
- .long gdt
- .word 0
- .quad 0x0000000000000000 /* NULL descriptor */
- .quad 0x00af9a000000ffff /* __KERNEL_CS */
- .quad 0x00cf92000000ffff /* __KERNEL_DS */
- .quad 0x0080890000000000 /* TS descriptor */
- .quad 0x0000000000000000 /* TS continued */
-gdt_end:
- .bss
-/* Stack for uncompression */
- .balign 4
-user_stack:
- .fill 4096,4,0
-user_stack_end:
+++ /dev/null
-/*
- * misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
- */
-
-#define _LINUX_STRING_H_ 1
-#define __LINUX_BITMAP_H 1
-
-#include <linux/linkage.h>
-#include <linux/screen_info.h>
-#include <asm/io.h>
-#include <asm/page.h>
-
-/* WARNING!!
- * This code is compiled with -fPIC and it is relocated dynamically
- * at run time, but no relocation processing is performed.
- * This means that it is not safe to place pointers in static structures.
- */
-
-/*
- * Getting to provable safe in place decompression is hard.
- * Worst case behaviours need to be analized.
- * Background information:
- *
- * The file layout is:
- * magic[2]
- * method[1]
- * flags[1]
- * timestamp[4]
- * extraflags[1]
- * os[1]
- * compressed data blocks[N]
- * crc[4] orig_len[4]
- *
- * resulting in 18 bytes of non compressed data overhead.
- *
- * Files divided into blocks
- * 1 bit (last block flag)
- * 2 bits (block type)
- *
- * 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved.
- * The smallest block type encoding is always used.
- *
- * stored:
- * 32 bits length in bytes.
- *
- * fixed:
- * magic fixed tree.
- * symbols.
- *
- * dynamic:
- * dynamic tree encoding.
- * symbols.
- *
- *
- * The buffer for decompression in place is the length of the
- * uncompressed data, plus a small amount extra to keep the algorithm safe.
- * The compressed data is placed at the end of the buffer. The output
- * pointer is placed at the start of the buffer and the input pointer
- * is placed where the compressed data starts. Problems will occur
- * when the output pointer overruns the input pointer.
- *
- * The output pointer can only overrun the input pointer if the input
- * pointer is moving faster than the output pointer. A condition only
- * triggered by data whose compressed form is larger than the uncompressed
- * form.
- *
- * The worst case at the block level is a growth of the compressed data
- * of 5 bytes per 32767 bytes.
- *
- * The worst case internal to a compressed block is very hard to figure.
- * The worst case can at least be boundined by having one bit that represents
- * 32764 bytes and then all of the rest of the bytes representing the very
- * very last byte.
- *
- * All of which is enough to compute an amount of extra data that is required
- * to be safe. To avoid problems at the block level allocating 5 extra bytes
- * per 32767 bytes of data is sufficient. To avoind problems internal to a block
- * adding an extra 32767 bytes (the worst case uncompressed block size) is
- * sufficient, to ensure that in the worst case the decompressed data for
- * block will stop the byte before the compressed data for a block begins.
- * To avoid problems with the compressed data's meta information an extra 18
- * bytes are needed. Leading to the formula:
- *
- * extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size.
- *
- * Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
- * Adding 32768 instead of 32767 just makes for round numbers.
- * Adding the decompressor_size is necessary as it musht live after all
- * of the data as well. Last I measured the decompressor is about 14K.
- * 10K of actuall data and 4K of bss.
- *
- */
-
-/*
- * gzip declarations
- */
-
-#define OF(args) args
-#define STATIC static
-
-#undef memset
-#undef memcpy
-#define memzero(s, n) memset ((s), 0, (n))
-
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x80000000 /* Window size must be at least 32k,
- * and a power of two
- * We don't actually have a window just
- * a huge output buffer so I report
- * a 2G windows size, as that should
- * always be larger than our output buffer.
- */
-
-static uch *inbuf; /* input buffer */
-static uch *window; /* Sliding window buffer, (and final output buffer) */
-
-static unsigned insize; /* valid bytes in inbuf */
-static unsigned inptr; /* index of next byte to be processed in inbuf */
-static unsigned outcnt; /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
-#define COMMENT 0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
-#define RESERVED 0xC0 /* bit 6,7: reserved */
-
-#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-# define Assert(cond,msg) {if(!(cond)) error(msg);}
-# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-# define Assert(cond,msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
-#endif
-
-static int fill_inbuf(void);
-static void flush_window(void);
-static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
-
-/*
- * This is set up by the setup-routine at boot-time
- */
-static unsigned char *real_mode; /* Pointer to real-mode data */
-
-#define RM_EXT_MEM_K (*(unsigned short *)(real_mode + 0x2))
-#ifndef STANDARD_MEMORY_BIOS_CALL
-#define RM_ALT_MEM_K (*(unsigned long *)(real_mode + 0x1e0))
-#endif
-#define RM_SCREEN_INFO (*(struct screen_info *)(real_mode+0))
-
-extern unsigned char input_data[];
-extern int input_len;
-
-static long bytes_out = 0;
-
-static void *malloc(int size);
-static void free(void *where);
-
-static void *memset(void *s, int c, unsigned n);
-static void *memcpy(void *dest, const void *src, unsigned n);
-
-static void putstr(const char *);
-
-static long free_mem_ptr;
-static long free_mem_end_ptr;
-
-#define HEAP_SIZE 0x7000
-
-static char *vidmem = (char *)0xb8000;
-static int vidport;
-static int lines, cols;
-
-#include "../../../../lib/inflate.c"
-
-static void *malloc(int size)
-{
- void *p;
-
- if (size <0) error("Malloc error");
- if (free_mem_ptr <= 0) error("Memory error");
-
- free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
-
- p = (void *)free_mem_ptr;
- free_mem_ptr += size;
-
- if (free_mem_ptr >= free_mem_end_ptr)
- error("Out of memory");
-
- return p;
-}
-
-static void free(void *where)
-{ /* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
- *ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
- free_mem_ptr = (long) *ptr;
-}
-
-static void scroll(void)
-{
- int i;
-
- memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 );
- for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 )
- vidmem[i] = ' ';
-}
-
-static void putstr(const char *s)
-{
- int x,y,pos;
- char c;
-
- x = RM_SCREEN_INFO.orig_x;
- y = RM_SCREEN_INFO.orig_y;
-
- while ( ( c = *s++ ) != '\0' ) {
- if ( c == '\n' ) {
- x = 0;
- if ( ++y >= lines ) {
- scroll();
- y--;
- }
- } else {
- vidmem [ ( x + cols * y ) * 2 ] = c;
- if ( ++x >= cols ) {
- x = 0;
- if ( ++y >= lines ) {
- scroll();
- y--;
- }
- }
- }
- }
-
- RM_SCREEN_INFO.orig_x = x;
- RM_SCREEN_INFO.orig_y = y;
-
- pos = (x + cols * y) * 2; /* Update cursor position */
- outb_p(14, vidport);
- outb_p(0xff & (pos >> 9), vidport+1);
- outb_p(15, vidport);
- outb_p(0xff & (pos >> 1), vidport+1);
-}
-
-static void* memset(void* s, int c, unsigned n)
-{
- int i;
- char *ss = (char*)s;
-
- for (i=0;i<n;i++) ss[i] = c;
- return s;
-}
-
-static void* memcpy(void* dest, const void* src, unsigned n)
-{
- int i;
- char *d = (char *)dest, *s = (char *)src;
-
- for (i=0;i<n;i++) d[i] = s[i];
- return dest;
-}
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
- error("ran out of input data");
- return 0;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
- /* With my window equal to my output buffer
- * I only need to compute the crc here.
- */
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, ch;
-
- in = window;
- for (n = 0; n < outcnt; n++) {
- ch = *in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- outcnt = 0;
-}
-
-static void error(char *x)
-{
- putstr("\n\n");
- putstr(x);
- putstr("\n\n -- System halted");
-
- while(1); /* Halt */
-}
-
-asmlinkage void decompress_kernel(void *rmode, unsigned long heap,
- uch *input_data, unsigned long input_len, uch *output)
-{
- real_mode = rmode;
-
- if (RM_SCREEN_INFO.orig_video_mode == 7) {
- vidmem = (char *) 0xb0000;
- vidport = 0x3b4;
- } else {
- vidmem = (char *) 0xb8000;
- vidport = 0x3d4;
- }
-
- lines = RM_SCREEN_INFO.orig_video_lines;
- cols = RM_SCREEN_INFO.orig_video_cols;
-
- window = output; /* Output buffer (Normally at 1M) */
- free_mem_ptr = heap; /* Heap */
- free_mem_end_ptr = heap + HEAP_SIZE;
- inbuf = input_data; /* Input buffer */
- insize = input_len;
- inptr = 0;
-
- if ((ulg)output & (__KERNEL_ALIGN - 1))
- error("Destination address not 2M aligned");
- if ((ulg)output >= 0xffffffffffUL)
- error("Destination address too large");
-
- makecrc();
- putstr(".\nDecompressing Linux...");
- gunzip();
- putstr("done.\nBooting the kernel.\n");
- return;
-}
+++ /dev/null
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
-OUTPUT_ARCH(i386:x86-64)
-ENTRY(startup_64)
-SECTIONS
-{
- /* Be careful parts of head.S assume startup_32 is at
- * address 0.
- */
- . = 0;
- .text : {
- _head = . ;
- *(.text.head)
- _ehead = . ;
- *(.text.compressed)
- _text = .; /* Text */
- *(.text)
- *(.text.*)
- _etext = . ;
- }
- .rodata : {
- _rodata = . ;
- *(.rodata) /* read-only data */
- *(.rodata.*)
- _erodata = . ;
- }
- .data : {
- _data = . ;
- *(.data)
- *(.data.*)
- _edata = . ;
- }
- .bss : {
- _bss = . ;
- *(.bss)
- *(.bss.*)
- *(COMMON)
- . = ALIGN(8);
- _end = . ;
- . = ALIGN(4096);
- pgtable = . ;
- . = . + 4096 * 6;
- _heap = .;
- }
-}
+++ /dev/null
-SECTIONS
-{
- .text.compressed : {
- input_len = .;
- LONG(input_data_end - input_data) input_data = .;
- *(.data)
- output_len = . - 4;
- input_data_end = .;
- }
-}
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff