ARM: Partially revert "Auto calculate ZRELADDR and provide option for exceptions"
authorRussell King <rmk+kernel@arm.linux.org.uk>
Thu, 9 Sep 2010 21:39:41 +0000 (22:39 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Thu, 9 Sep 2010 21:39:41 +0000 (22:39 +0100)
Partially revert e69edc7, which introduced automatic zreladdr
support.  The change in the way the manual definition is defined
seems to be error and conflict prone.  Go back to the original way
we were handling this for the time being, while keeping the automatic
zreladdr facility.

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/Kconfig
arch/arm/boot/Makefile
arch/arm/boot/compressed/Makefile
arch/arm/boot/compressed/head.S

index 16bc8eb4901c9335b32a774082e9bc1cc77bb8b9..553b7cf17bfb0bac057eaedf0402a0bca2aa47e8 100644 (file)
@@ -1576,97 +1576,6 @@ config AUTO_ZRELADDR
          0xf8000000. This assumes the zImage being placed in the first 128MB
          from start of memory.
 
-config ZRELADDR
-       hex "Physical address of the decompressed kernel image"
-       depends on !AUTO_ZRELADDR
-       default 0x00008000 if ARCH_BCMRING ||\
-               ARCH_CNS3XXX ||\
-               ARCH_DOVE ||\
-               ARCH_EBSA110 ||\
-               ARCH_FOOTBRIDGE ||\
-               ARCH_INTEGRATOR ||\
-               ARCH_IOP13XX ||\
-               ARCH_IOP33X ||\
-               ARCH_IXP2000 ||\
-               ARCH_IXP23XX ||\
-               ARCH_IXP4XX ||\
-               ARCH_KIRKWOOD ||\
-               ARCH_KS8695 ||\
-               ARCH_LOKI ||\
-               ARCH_MMP ||\
-               ARCH_MV78XX0 ||\
-               ARCH_NOMADIK ||\
-               ARCH_NUC93X ||\
-               ARCH_NS9XXX ||\
-               ARCH_ORION5X ||\
-               ARCH_SPEAR3XX ||\
-               ARCH_SPEAR6XX ||\
-               ARCH_TEGRA ||\
-               ARCH_U8500 ||\
-               ARCH_VERSATILE ||\
-               ARCH_W90X900
-       default 0x08008000 if ARCH_MX1 ||\
-               ARCH_SHARK
-       default 0x10008000 if ARCH_MSM ||\
-               ARCH_OMAP1 ||\
-               ARCH_RPC
-       default 0x20008000 if ARCH_S5P6440 ||\
-               ARCH_S5P6442 ||\
-               ARCH_S5PC100 ||\
-               ARCH_S5PV210
-       default 0x30008000 if ARCH_S3C2410 ||\
-               ARCH_S3C2400 ||\
-               ARCH_S3C2412 ||\
-               ARCH_S3C2416 ||\
-               ARCH_S3C2440 ||\
-               ARCH_S3C2443
-       default 0x40008000 if ARCH_STMP378X ||\
-               ARCH_STMP37XX ||\
-               ARCH_SH7372 ||\
-               ARCH_SH7377 ||\
-               ARCH_S5PV310
-       default 0x50008000 if ARCH_S3C64XX ||\
-               ARCH_SH7367
-       default 0x60008000 if ARCH_VEXPRESS
-       default 0x80008000 if ARCH_MX25 ||\
-               ARCH_MX3 ||\
-               ARCH_NETX ||\
-               ARCH_OMAP2PLUS ||\
-               ARCH_PNX4008
-       default 0x90008000 if ARCH_MX5 ||\
-               ARCH_MX91231
-       default 0xa0008000 if ARCH_IOP32X ||\
-               ARCH_PXA ||\
-               MACH_MX27
-       default 0xc0008000 if ARCH_LH7A40X ||\
-               MACH_MX21
-       default 0xf0008000 if ARCH_AAEC2000 ||\
-               ARCH_L7200
-       default 0xc0028000 if ARCH_CLPS711X
-       default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
-       default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
-       default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX
-       default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX
-       default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET
-       default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET
-       default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET
-       default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET
-       default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET
-       default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP
-       default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP
-       default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET
-       default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET
-       default 0xc0208000 if ARCH_SA1100 && SA1111
-       default 0xc0008000 if ARCH_SA1100 && !SA1111
-       default 0x30108000 if ARCH_S3C2410 && PM_H1940
-       default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM
-       default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM
-       help
-         ZRELADDR is the physical address where the decompressed kernel
-         image will be placed. ZRELADDR has to be specified when the
-         assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is
-         selected.
-
 endmenu
 
 menu "CPU Power Management"
index f705213caa881af9c07e181c0d2a3a1a26a5d98a..4a590f4113e2af044ea1764aeb0681ad7f50a74c 100644 (file)
 MKIMAGE         := $(srctree)/scripts/mkuboot.sh
 
 ifneq ($(MACHINE),)
--include $(srctree)/$(MACHINE)/Makefile.boot
+include $(srctree)/$(MACHINE)/Makefile.boot
 endif
 
 # Note: the following conditions must always be true:
+#   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
 #   INITRD_PHYS must be in RAM
+ZRELADDR    := $(zreladdr-y)
 PARAMS_PHYS := $(params_phys-y)
 INITRD_PHYS := $(initrd_phys-y)
 
-export INITRD_PHYS PARAMS_PHYS
+export ZRELADDR INITRD_PHYS PARAMS_PHYS
 
 targets := Image zImage xipImage bootpImage uImage
 
@@ -65,7 +67,7 @@ quiet_cmd_uimage = UIMAGE  $@
 ifeq ($(CONFIG_ZBOOT_ROM),y)
 $(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
 else
-$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR)
+$(obj)/uImage: LOADADDR=$(ZRELADDR)
 endif
 
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
index 68775e33476c2fafb4c20d88f7f676c836a8edc1..b23f6bc46cfa1dd1029bb53dc7009c3c790f1088 100644 (file)
@@ -79,6 +79,10 @@ endif
 EXTRA_CFLAGS  := -fpic -fno-builtin
 EXTRA_AFLAGS  := -Wa,-march=all
 
+# Supply ZRELADDR to the decompressor via a linker symbol.
+ifneq ($(CONFIG_AUTO_ZRELADDR),y)
+LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+endif
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux += --be8
 endif
index 6af9907c3b5ccad2ae2d73e37f5470c5b2f6b897..6825c34646d4e02f24b0eefe7ab4e012bca05208 100644 (file)
@@ -177,7 +177,7 @@ not_angel:
                and     r4, pc, #0xf8000000
                add     r4, r4, #TEXT_OFFSET
 #else
-               ldr     r4, =CONFIG_ZRELADDR
+               ldr     r4, =zreladdr
 #endif
                subs    r0, r0, r1              @ calculate the delta offset