tree-wide: fix typos "ammount" -> "amount"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 4ec900af332f0656ed4a847970b57bb8d66761ed..b1dbd9ee87ccb477f5d18d846994dcc566317132 100644 (file)
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -47,7 +47,7 @@
 #include "mmu_decl.h"
 
 #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
-/* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */
+/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
 #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
 #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
 #endif

diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index 452370af95def5a352dd4753107ce3fd4154fb93..aee3c0d1759f9623697aac49a63e75433aac7ba6 100644 (file)
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -1990,7 +1990,7 @@ void mvme167_serial_console_setup(int cflag)
        /*
         * Attempt to set up all channels to something reasonable, and
         * bang out a INIT_CHAN command.  We should then be able to limit
-        * the ammount of fiddling we have to do in normal running.
+        * the amount of fiddling we have to do in normal running.
         */
 
        for (ch = 3; ch >= 0; ch--) {

diff --git a/drivers/isdn/sc/hardware.h b/drivers/isdn/sc/hardware.h
index 9e6d5302bf8e34f0bcb66ec1a7bb0cf77ebdb1ff..627324856ead85eda13819ad15a5235009a2a8a2 100644 (file)
--- a/drivers/isdn/sc/hardware.h
+++ b/drivers/isdn/sc/hardware.h
@@ -87,7 +87,7 @@
 #define BRI_CHANNELS   2               /* Number of B channels */
 #define BRI_BASEPG_VAL 0x98
 #define BRI_MAGIC      0x60000         /* Magic Number */
-#define BRI_MEMSIZE    0x10000         /* Ammount of RAM (64K) */
+#define BRI_MEMSIZE    0x10000         /* Amount of RAM (64K) */
 #define BRI_PARTNO     "72-029"
 #define BRI_FEATURES   ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS;
 /*

diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
index e5ab62141503e9e8bd4c3074e08fc6f9abf4ed9b..ef5ce2676f0534686132caf1534c0a99391d7724 100644 (file)
--- a/drivers/message/i2o/iop.c
+++ b/drivers/message/i2o/iop.c
@@ -539,7 +539,7 @@ static int i2o_iop_reset(struct i2o_controller *c)
                 * which is indeterminate. We need to wait until the IOP has
                 * rebooted before we can let the system talk to it. We read
                 * the inbound Free_List until a message is available. If we
-                * can't read one in the given ammount of time, we assume the
+                * can't read one in the given amount of time, we assume the
                 * IOP could not reboot properly.
                 */
                osm_debug("%s: Reset in progress, waiting for reboot...\n",

diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
index 6d3ac65bc35cfcd1ae3eb27e6249a8be38efe705..cfebe0e218fc21fdaa6d7515e5c9572750d8168a 100644 (file)
--- a/drivers/net/ks8851.c
+++ b/drivers/net/ks8851.c
@@ -407,7 +407,7 @@ static irqreturn_t ks8851_irq(int irq, void *pw)
  * @buff: The buffer address
  * @len: The length of the data to read
  *
- * Issue an RXQ FIFO read command and read the @len ammount of data from
+ * Issue an RXQ FIFO read command and read the @len amount of data from
  * the FIFO into the buffer specified by @buff.
  */
 static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index e67e4feb35cb814f85ad2df10bc1836c00cc79b6..215621c31c5fadfcfa08d3f8416c8d35ae3c84e7 100644 (file)
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -1667,7 +1667,7 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv)
  * Table of recommended minimum BIOS versions
  *
  * Reasons for listing:
- *    1. Stable BIOS, listed because the unknown ammount of
+ *    1. Stable BIOS, listed because the unknown amount of
  *       bugs and bad ACPI behaviour on older versions
  *
  *    2. BIOS or EC fw with known bugs that trigger on Linux
@@ -7070,7 +7070,7 @@ static struct ibm_struct volume_driver_data = {
  *
  *     Fan speed changes of any sort (including those caused by the
  *     disengaged mode) are usually done slowly by the firmware as the
- *     maximum ammount of fan duty cycle change per second seems to be
+ *     maximum amount of fan duty cycle change per second seems to be
  *     limited.
  *
  *     Reading is not available if GFAN exists.

diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 881d5dfe8c74f5a37c58474690c832d1d1ac1a78..96ee599d9a056f271037052bdca71c66fb3f2c44 100644 (file)
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -522,7 +522,7 @@ crc_err:
  *
  * Called after receiving a Transfer Ready data descriptor.
  * If the LLD is capable of sequence offload then send down the
- * seq_blen ammount of data in single frame, otherwise send
+ * seq_blen amount of data in single frame, otherwise send
  * multiple frames of the maximum frame payload supported by
  * the target port.
  */

diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 52e3df113ec01fd8342e824b869bc6f7d4ce5865..03c010af966b9e68936b6bb17b63a0429e9267cf 100644 (file)
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1271,7 +1271,7 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
        unsigned long ufstat, utrstat;
 
        if (ufcon & S3C2410_UFCON_FIFOMODE) {
-               /* fifo mode - check ammount of data in fifo registers... */
+               /* fifo mode - check amount of data in fifo registers... */
 
                ufstat = rd_regl(port, S3C2410_UFSTAT);
                return (ufstat & info->tx_fifofull) ? 0 : 1;

diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 4cdb975caa89a96a897451ba57203e97968a7bdc..96937f1b8b973172b629d49fec3cb9caa562134b 100644 (file)
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -120,7 +120,7 @@ static void opticon_bulk_callback(struct urb *urb)
                }
        } else {
                dev_dbg(&priv->udev->dev,
-                       "Improper ammount of data received from the device, "
+                       "Improper amount of data received from the device, "
                        "%d bytes", urb->actual_length);
        }
 

diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index b282c0f2d8e565101bd17a7f0f37e220b9b17e6d..aebfcf699644a15ee9011f33d940059abad6b3fb 100644 (file)
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -100,7 +100,7 @@ static void symbol_int_callback(struct urb *urb)
                }
        } else {
                dev_dbg(&priv->udev->dev,
-                       "Improper ammount of data received from the device, "
+                       "Improper amount of data received from the device, "
                        "%d bytes", urb->actual_length);
        }