ath10k: fix add_interface failure handling
authorMichal Kazior <michal.kazior@tieto.com>
Wed, 16 Oct 2013 12:44:45 +0000 (15:44 +0300)
committerKalle Valo <kvalo@qca.qualcomm.com>
Wed, 16 Oct 2013 12:44:45 +0000 (15:44 +0300)
If something failed along add_interface() setup it
was possible to leak a vdev id, vdev and peer.

This could end up with leaked FW state or FW crash
(assuming add_interface() failure wasn't a result of
a crash).

kvalo: rebased, whitespace fixes

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
drivers/net/wireless/ath/ath10k/mac.c

index bc0e17bb07c254345bf790fcaa8c81b6b08112a0..16e55bd22fc2f8359efe3b1ce49edc0d05ee51ef 100644 (file)
@@ -2043,18 +2043,17 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
        if ((vif->type == NL80211_IFTYPE_MONITOR) && ar->monitor_present) {
                ath10k_warn("Only one monitor interface allowed\n");
                ret = -EBUSY;
-               goto exit;
+               goto err;
        }
 
        bit = ffs(ar->free_vdev_map);
        if (bit == 0) {
                ret = -EBUSY;
-               goto exit;
+               goto err;
        }
 
        arvif->vdev_id = bit - 1;
        arvif->vdev_subtype = WMI_VDEV_SUBTYPE_NONE;
-       ar->free_vdev_map &= ~(1 << arvif->vdev_id);
 
        if (ar->p2p)
                arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE;
@@ -2090,27 +2089,33 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
                                     arvif->vdev_subtype, vif->addr);
        if (ret) {
                ath10k_warn("WMI vdev create failed: ret %d\n", ret);
-               goto exit;
+               goto err;
        }
 
+       ar->free_vdev_map &= ~BIT(arvif->vdev_id);
+
        vdev_param = ar->wmi.vdev_param->def_keyid;
        ret = ath10k_wmi_vdev_set_param(ar, 0, vdev_param,
                                        arvif->def_wep_key_idx);
-       if (ret)
+       if (ret) {
                ath10k_warn("Failed to set default keyid: %d\n", ret);
+               goto err_vdev_delete;
+       }
 
        vdev_param = ar->wmi.vdev_param->tx_encap_type;
        ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
                                        ATH10K_HW_TXRX_NATIVE_WIFI);
        /* 10.X firmware does not support this VDEV parameter. Do not warn */
-       if (ret && ret != -EOPNOTSUPP)
+       if (ret && ret != -EOPNOTSUPP) {
                ath10k_warn("Failed to set TX encap: %d\n", ret);
+               goto err_vdev_delete;
+       }
 
        if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
                ret = ath10k_peer_create(ar, arvif->vdev_id, vif->addr);
                if (ret) {
                        ath10k_warn("Failed to create peer for AP: %d\n", ret);
-                       goto exit;
+                       goto err_vdev_delete;
                }
        }
 
@@ -2119,39 +2124,61 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
                value = WMI_STA_PS_RX_WAKE_POLICY_WAKE;
                ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
                                                  param, value);
-               if (ret)
+               if (ret) {
                        ath10k_warn("Failed to set RX wake policy: %d\n", ret);
+                       goto err_peer_delete;
+               }
 
                param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD;
                value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS;
                ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
                                                  param, value);
-               if (ret)
+               if (ret) {
                        ath10k_warn("Failed to set TX wake thresh: %d\n", ret);
+                       goto err_peer_delete;
+               }
 
                param = WMI_STA_PS_PARAM_PSPOLL_COUNT;
                value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX;
                ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
                                                  param, value);
-               if (ret)
+               if (ret) {
                        ath10k_warn("Failed to set PSPOLL count: %d\n", ret);
+                       goto err_peer_delete;
+               }
        }
 
        ret = ath10k_mac_set_rts(arvif, ar->hw->wiphy->rts_threshold);
-       if (ret)
+       if (ret) {
                ath10k_warn("failed to set rts threshold for vdev %d (%d)\n",
                            arvif->vdev_id, ret);
+               goto err_peer_delete;
+       }
 
        ret = ath10k_mac_set_frag(arvif, ar->hw->wiphy->frag_threshold);
-       if (ret)
+       if (ret) {
                ath10k_warn("failed to set frag threshold for vdev %d (%d)\n",
                            arvif->vdev_id, ret);
+               goto err_peer_delete;
+       }
 
        if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
                ar->monitor_present = true;
 
-exit:
        mutex_unlock(&ar->conf_mutex);
+       return 0;
+
+err_peer_delete:
+       if (arvif->vdev_type == WMI_VDEV_TYPE_AP)
+               ath10k_wmi_peer_delete(ar, arvif->vdev_id, vif->addr);
+
+err_vdev_delete:
+       ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
+       ar->free_vdev_map &= ~BIT(arvif->vdev_id);
+
+err:
+       mutex_unlock(&ar->conf_mutex);
+
        return ret;
 }