--- /dev/null
+/*
+ * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24
+ * Copyright (C) 2009, 2010 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * STMicroelectronics version 1.2.0, Copyright (C) 2010
+ * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
+ * This is free software, and you are welcome to redistribute it
+ * under certain conditions.
+ *
+ * @Author: Christophe RICARD tpmsupport@st.com
+ *
+ * @File: tpm_stm_st33_i2c.c
+ *
+ * @Synopsis:
+ * 09/15/2010: First shot driver tpm_tis driver for
+ lpc is used as model.
+ */
+
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/sysfs.h>
+#include <linux/gpio.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+
+#include "tpm.h"
+#include "tpm_i2c_stm_st33.h"
+
+enum stm33zp24_access {
+ TPM_ACCESS_VALID = 0x80,
+ TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
+ TPM_ACCESS_REQUEST_PENDING = 0x04,
+ TPM_ACCESS_REQUEST_USE = 0x02,
+};
+
+enum stm33zp24_status {
+ TPM_STS_VALID = 0x80,
+ TPM_STS_COMMAND_READY = 0x40,
+ TPM_STS_GO = 0x20,
+ TPM_STS_DATA_AVAIL = 0x10,
+ TPM_STS_DATA_EXPECT = 0x08,
+};
+
+enum stm33zp24_int_flags {
+ TPM_GLOBAL_INT_ENABLE = 0x80,
+ TPM_INTF_CMD_READY_INT = 0x080,
+ TPM_INTF_FIFO_AVALAIBLE_INT = 0x040,
+ TPM_INTF_WAKE_UP_READY_INT = 0x020,
+ TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
+ TPM_INTF_STS_VALID_INT = 0x002,
+ TPM_INTF_DATA_AVAIL_INT = 0x001,
+};
+
+enum tis_defaults {
+ TIS_SHORT_TIMEOUT = 750,
+ TIS_LONG_TIMEOUT = 2000,
+};
+
+/*
+ * write8_reg
+ * Send byte to the TIS register according to the ST33ZP24 I2C protocol.
+ * @param: tpm_register, the tpm tis register where the data should be written
+ * @param: tpm_data, the tpm_data to write inside the tpm_register
+ * @param: tpm_size, The length of the data
+ * @return: Returns negative errno, or else the number of bytes written.
+ */
+static int write8_reg(struct i2c_client *client, u8 tpm_register,
+ u8 *tpm_data, u16 tpm_size)
+{
+ u8 data;
+ int value = 0;
+ struct st33zp24_platform_data *pin_infos;
+
+ pin_infos = client->dev.platform_data;
+
+ data = tpm_register;
+ memcpy(pin_infos->tpm_i2c_buffer[0], &data, sizeof(data));
+ memcpy(pin_infos->tpm_i2c_buffer[0] + 1, tpm_data, tpm_size);
+ value = i2c_master_send(client, pin_infos->tpm_i2c_buffer[0],
+ tpm_size + 1);
+ return value;
+} /* write8_reg() */
+
+/*
+ * read8_reg
+ * Recv byte from the TIS register according to the ST33ZP24 I2C protocol.
+ * @param: tpm_register, the tpm tis register where the data should be read
+ * @param: tpm_data, the TPM response
+ * @param: tpm_size, tpm TPM response size to read.
+ * @return: number of byte read successfully: should be one if success.
+ */
+static int read8_reg(struct i2c_client *client, u8 tpm_register,
+ u8 *tpm_data, int tpm_size)
+{
+ u8 status = 0;
+ u8 data;
+ struct st33zp24_platform_data *pin_infos;
+
+ pin_infos = client->dev.platform_data;
+
+ data = TPM_DUMMY_BYTE;
+ status = write8_reg(client, tpm_register, &data, 1);
+ if (status == 2)
+ status = i2c_master_recv(client, tpm_data, tpm_size);
+ return status;
+} /* read8_reg() */
+
+/*
+ * I2C_WRITE_DATA
+ * Send byte to the TIS register according to the ST33ZP24 I2C protocol.
+ * @param: client, the chip description
+ * @param: tpm_register, the tpm tis register where the data should be written
+ * @param: tpm_data, the tpm_data to write inside the tpm_register
+ * @param: tpm_size, The length of the data
+ * @return: number of byte written successfully: should be one if success.
+ */
+#define I2C_WRITE_DATA(client, tpm_register, tpm_data, tpm_size) \
+ (write8_reg(client, tpm_register | \
+ TPM_WRITE_DIRECTION, tpm_data, tpm_size))
+
+/*
+ * I2C_READ_DATA
+ * Recv byte from the TIS register according to the ST33ZP24 I2C protocol.
+ * @param: tpm, the chip description
+ * @param: tpm_register, the tpm tis register where the data should be read
+ * @param: tpm_data, the TPM response
+ * @param: tpm_size, tpm TPM response size to read.
+ * @return: number of byte read successfully: should be one if success.
+ */
+#define I2C_READ_DATA(client, tpm_register, tpm_data, tpm_size) \
+ (read8_reg(client, tpm_register, tpm_data, tpm_size))
+
+/*
+ * clear_interruption
+ * clear the TPM interrupt register.
+ * @param: tpm, the chip description
+ */
+static void clear_interruption(struct i2c_client *client)
+{
+ u8 interrupt;
+ I2C_READ_DATA(client, TPM_INT_STATUS, &interrupt, 1);
+ I2C_WRITE_DATA(client, TPM_INT_STATUS, &interrupt, 1);
+ I2C_READ_DATA(client, TPM_INT_STATUS, &interrupt, 1);
+} /* clear_interruption() */
+
+/*
+ * _wait_for_interrupt_serirq_timeout
+ * @param: tpm, the chip description
+ * @param: timeout, the timeout of the interrupt
+ * @return: the status of the interruption.
+ */
+static long _wait_for_interrupt_serirq_timeout(struct tpm_chip *chip,
+ unsigned long timeout)
+{
+ long status;
+ struct i2c_client *client;
+ struct st33zp24_platform_data *pin_infos;
+
+ client = (struct i2c_client *) TPM_VPRIV(chip);
+ pin_infos = client->dev.platform_data;
+
+ status = wait_for_completion_interruptible_timeout(
+ &pin_infos->irq_detection,
+ timeout);
+ if (status > 0)
+ enable_irq(gpio_to_irq(pin_infos->io_serirq));
+ gpio_direction_input(pin_infos->io_serirq);
+
+ return status;
+} /* wait_for_interrupt_serirq_timeout() */
+
+static int wait_for_serirq_timeout(struct tpm_chip *chip, bool condition,
+ unsigned long timeout)
+{
+ int status = 2;
+ struct i2c_client *client;
+ struct st33zp24_platform_data *pin_infos;
+
+ client = (struct i2c_client *) TPM_VPRIV(chip);
+ pin_infos = client->dev.platform_data;
+
+ status = _wait_for_interrupt_serirq_timeout(chip, timeout);
+ if (!status) {
+ status = -EBUSY;
+ } else{
+ clear_interruption(client);
+ if (condition)
+ status = 1;
+ }
+ return status;
+}
+
+/*
+ * tpm_stm_i2c_cancel, cancel is not implemented.
+ * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
+ */
+static void tpm_stm_i2c_cancel(struct tpm_chip *chip)
+{
+ struct i2c_client *client;
+ u8 data;
+
+ client = (struct i2c_client *) TPM_VPRIV(chip);
+
+ data = TPM_STS_COMMAND_READY;
+ I2C_WRITE_DATA(client, TPM_STS, &data, 1);
+ if (chip->vendor.irq)
+ wait_for_serirq_timeout(chip, 1, chip->vendor.timeout_a);
+} /* tpm_stm_i2c_cancel() */
+
+/*
+ * tpm_stm_spi_status return the TPM_STS register
+ * @param: chip, the tpm chip description
+ * @return: the TPM_STS register value.
+ */
+static u8 tpm_stm_i2c_status(struct tpm_chip *chip)
+{
+ struct i2c_client *client;
+ u8 data;
+ client = (struct i2c_client *) TPM_VPRIV(chip);
+
+ I2C_READ_DATA(client, TPM_STS, &data, 1);
+ return data;
+} /* tpm_stm_i2c_status() */
+
+
+/*
+ * check_locality if the locality is active
+ * @param: chip, the tpm chip description
+ * @return: the active locality or -EACCESS.
+ */
+static int check_locality(struct tpm_chip *chip)
+{
+ struct i2c_client *client;
+ u8 data;
+ u8 status;
+
+ client = (struct i2c_client *) TPM_VPRIV(chip);
+
+ status = I2C_READ_DATA(client, TPM_ACCESS, &data, 1);
+ if (status && (data &
+ (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
+ (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
+ return chip->vendor.locality;
+
+ return -EACCES;
+
+} /* check_locality() */
+
+/*
+ * request_locality request the TPM locality
+ * @param: chip, the chip description
+ * @return: the active locality or EACCESS.
+ */
+static int request_locality(struct tpm_chip *chip)
+{
+ unsigned long stop;
+ long rc;
+ struct i2c_client *client;
+ u8 data;
+
+ client = (struct i2c_client *) TPM_VPRIV(chip);
+
+ if (check_locality(chip) == chip->vendor.locality)
+ return chip->vendor.locality;
+
+ data = TPM_ACCESS_REQUEST_USE;
+ rc = I2C_WRITE_DATA(client, TPM_ACCESS, &data, 1);
+ if (rc < 0)
+ goto end;
+
+ if (chip->vendor.irq) {
+ rc = wait_for_serirq_timeout(chip, (check_locality
+ (chip) >= 0),
+ chip->vendor.timeout_a);
+ if (rc > 0)
+ return chip->vendor.locality;
+ } else{
+ stop = jiffies + chip->vendor.timeout_a;
+ do {
+ if (check_locality(chip) >= 0)
+ return chip->vendor.locality;
+ msleep(TPM_TIMEOUT);
+ } while (time_before(jiffies, stop));
+ }
+ rc = -EACCES;
+end:
+ return rc;
+} /* request_locality() */
+
+/*
+ * release_locality release the active locality
+ * @param: chip, the tpm chip description.
+ */
+static void release_locality(struct tpm_chip *chip)
+{
+ struct i2c_client *client;
+ u8 data;
+
+ client = (struct i2c_client *) TPM_VPRIV(chip);
+ data = TPM_ACCESS_ACTIVE_LOCALITY;
+
+ I2C_WRITE_DATA(client, TPM_ACCESS, &data, 1);
+}
+
+/*
+ * get_burstcount return the burstcount address 0x19 0x1A
+ * @param: chip, the chip description
+ * return: the burstcount.
+ */
+static int get_burstcount(struct tpm_chip *chip)
+{
+ unsigned long stop;
+ int burstcnt, status;
+ u8 tpm_reg, temp;
+
+ struct i2c_client *client = (struct i2c_client *) TPM_VPRIV(chip);
+
+ stop = jiffies + chip->vendor.timeout_d;
+ do {
+ tpm_reg = TPM_STS + 1;
+ status = I2C_READ_DATA(client, tpm_reg, &temp, 1);
+ if (status < 0)
+ goto end;
+
+ tpm_reg = tpm_reg + 1;
+ burstcnt = temp;
+ status = I2C_READ_DATA(client, tpm_reg, &temp, 1);
+ if (status < 0)
+ goto end;
+
+ burstcnt |= temp << 8;
+ if (burstcnt)
+ return burstcnt;
+ msleep(TPM_TIMEOUT);
+ } while (time_before(jiffies, stop));
+
+end:
+ return -EBUSY;
+} /* get_burstcount() */
+
+/*
+ * wait_for_stat wait for a TPM_STS value
+ * @param: chip, the tpm chip description
+ * @param: mask, the value mask to wait
+ * @param: timeout, the timeout
+ * @param: queue, the wait queue.
+ * @return: the tpm status, 0 if success, -ETIME if timeout is reached.
+ */
+static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
+ wait_queue_head_t *queue)
+{
+ unsigned long stop;
+ long rc;
+ u8 status;
+
+ if (chip->vendor.irq) {
+ rc = wait_for_serirq_timeout(chip, ((tpm_stm_i2c_status
+ (chip) & mask) ==
+ mask), timeout);
+ if (rc > 0)
+ return 0;
+ } else{
+ stop = jiffies + timeout;
+ do {
+ msleep(TPM_TIMEOUT);
+ status = tpm_stm_i2c_status(chip);
+ if ((status & mask) == mask)
+ return 0;
+ } while (time_before(jiffies, stop));
+ }
+ return -ETIME;
+} /* wait_for_stat() */
+
+/*
+ * recv_data receive data
+ * @param: chip, the tpm chip description
+ * @param: buf, the buffer where the data are received
+ * @param: count, the number of data to receive
+ * @return: the number of bytes read from TPM FIFO.
+ */
+static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
+{
+ int size = 0, burstcnt, len;
+ struct i2c_client *client;
+
+ client = (struct i2c_client *) TPM_VPRIV(chip);
+
+ while (size < count &&
+ wait_for_stat(chip,
+ TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+ chip->vendor.timeout_c,
+ &chip->vendor.read_queue)
+ == 0) {
+ burstcnt = get_burstcount(chip);
+ len = min_t(int, burstcnt, count - size);
+ I2C_READ_DATA(client, TPM_DATA_FIFO, buf + size, len);
+ size += len;
+ }
+ return size;
+}
+
+/*
+ * tpm_ioserirq_handler the serirq irq handler
+ * @param: irq, the tpm chip description
+ * @param: dev_id, the description of the chip
+ * @return: the status of the handler.
+ */
+static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
+{
+ struct tpm_chip *chip = dev_id;
+ struct i2c_client *client;
+ struct st33zp24_platform_data *pin_infos;
+
+ disable_irq_nosync(irq);
+
+ client = (struct i2c_client *) TPM_VPRIV(chip);
+ pin_infos = client->dev.platform_data;
+
+ complete(&pin_infos->irq_detection);
+ return IRQ_HANDLED;
+} /* tpm_ioserirq_handler() */
+
+
+/*
+ * tpm_stm_i2c_send send TPM commands through the I2C bus.
+ *
+ * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
+ * @param: buf, the buffer to send.
+ * @param: count, the number of bytes to send.
+ * @return: In case of success the number of bytes sent.
+ * In other case, a < 0 value describing the issue.
+ */
+static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
+ size_t len)
+{
+ u32 ordinal,
+ status,
+ burstcnt = 0, i, size;
+ int ret;
+ u8 data;
+ struct i2c_client *client;
+ struct st33zp24_platform_data *pin_infos;
+
+ if (chip == NULL)
+ return -EBUSY;
+ if (len < TPM_HEADER_SIZE)
+ return -EBUSY;
+
+ client = (struct i2c_client *)TPM_VPRIV(chip);
+ pin_infos = client->dev.platform_data;
+
+ ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
+
+ client->flags = 0;
+
+ ret = request_locality(chip);
+ if (ret < 0)
+ return ret;
+
+ status = tpm_stm_i2c_status(chip);
+ if ((status & TPM_STS_COMMAND_READY) == 0) {
+ tpm_stm_i2c_cancel(chip);
+ if (wait_for_stat
+ (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b,
+ &chip->vendor.int_queue) < 0) {
+ ret = -ETIME;
+ goto out_err;
+ }
+ }
+
+ for (i = 0 ; i < len - 1 ;) {
+ burstcnt = get_burstcount(chip);
+ size = min_t(int, len - i - 1, burstcnt);
+ ret = I2C_WRITE_DATA(client, TPM_DATA_FIFO, buf, size);
+ if (ret < 0)
+ goto out_err;
+
+ i += size;
+ }
+
+ status = tpm_stm_i2c_status(chip);
+ if ((status & TPM_STS_DATA_EXPECT) == 0) {
+ ret = -EIO;
+ goto out_err;
+ }
+
+ ret = I2C_WRITE_DATA(client, TPM_DATA_FIFO, buf + len - 1, 1);
+ if (ret < 0)
+ goto out_err;
+
+ status = tpm_stm_i2c_status(chip);
+ if ((status & TPM_STS_DATA_EXPECT) != 0) {
+ ret = -EIO;
+ goto out_err;
+ }
+
+ data = TPM_STS_GO;
+ I2C_WRITE_DATA(client, TPM_STS, &data, 1);
+
+ return len;
+out_err:
+ tpm_stm_i2c_cancel(chip);
+ release_locality(chip);
+ return ret;
+}
+
+/*
+ * tpm_stm_i2c_recv received TPM response through the I2C bus.
+ * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
+ * @param: buf, the buffer to store datas.
+ * @param: count, the number of bytes to send.
+ * @return: In case of success the number of bytes received.
+ * In other case, a < 0 value describing the issue.
+ */
+static int tpm_stm_i2c_recv(struct tpm_chip *chip, unsigned char *buf,
+ size_t count)
+{
+ int size = 0;
+ int expected;
+
+ struct i2c_client *client;
+ struct st33zp24_platform_data *pin_infos;
+
+ if (chip == NULL)
+ return -EBUSY;
+
+ client = (struct i2c_client *)TPM_VPRIV(chip);
+ pin_infos = client->dev.platform_data;
+
+ if (count < TPM_HEADER_SIZE) {
+ size = -EIO;
+ goto out;
+ }
+
+ size = recv_data(chip, buf, TPM_HEADER_SIZE);
+ if (size < TPM_HEADER_SIZE) {
+ dev_err(chip->dev, "Unable to read header\n");
+ goto out;
+ }
+
+ expected = be32_to_cpu(*(__be32 *) (buf + 2));
+ if (expected > count) {
+ size = -EIO;
+ goto out;
+ }
+
+ size += recv_data(chip, &buf[TPM_HEADER_SIZE],
+ expected - TPM_HEADER_SIZE);
+ if (size < expected) {
+ dev_err(chip->dev, "Unable to read remainder of result\n");
+ size = -ETIME;
+ goto out;
+ }
+
+out:
+ chip->vendor.cancel(chip);
+ release_locality(chip);
+ return size;
+}
+
+static const struct file_operations tpm_st33_i2c_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .read = tpm_read,
+ .write = tpm_write,
+ .open = tpm_open,
+ .release = tpm_release,
+};
+
+static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
+static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
+static DEVICE_ATTR(enabled, S_IRUGO, tpm_show_enabled, NULL);
+static DEVICE_ATTR(active, S_IRUGO, tpm_show_active, NULL);
+static DEVICE_ATTR(owned, S_IRUGO, tpm_show_owned, NULL);
+static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated, NULL);
+static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
+static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
+
+static struct attribute *stm_tpm_attrs[] = {
+ &dev_attr_pubek.attr,
+ &dev_attr_pcrs.attr,
+ &dev_attr_enabled.attr,
+ &dev_attr_active.attr,
+ &dev_attr_owned.attr,
+ &dev_attr_temp_deactivated.attr,
+ &dev_attr_caps.attr,
+ &dev_attr_cancel.attr, NULL,
+};
+
+static struct attribute_group stm_tpm_attr_grp = {
+ .attrs = stm_tpm_attrs
+};
+
+static struct tpm_vendor_specific st_i2c_tpm = {
+ .send = tpm_stm_i2c_send,
+ .recv = tpm_stm_i2c_recv,
+ .cancel = tpm_stm_i2c_cancel,
+ .status = tpm_stm_i2c_status,
+ .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+ .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+ .req_canceled = TPM_STS_COMMAND_READY,
+ .attr_group = &stm_tpm_attr_grp,
+ .miscdev = {.fops = &tpm_st33_i2c_fops,},
+};
+
+static int interrupts ;
+module_param(interrupts, int, 0444);
+MODULE_PARM_DESC(interrupts, "Enable interrupts");
+
+static int power_mgt = 1;
+module_param(power_mgt, int, 0444);
+MODULE_PARM_DESC(power_mgt, "Power Management");
+
+/*
+ * tpm_st33_i2c_probe initialize the TPM device
+ * @param: client, the i2c_client drescription (TPM I2C description).
+ * @param: id, the i2c_device_id struct.
+ * @return: 0 in case of success.
+ * -1 in other case.
+ */
+static int
+tpm_st33_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ int err;
+ u8 intmask;
+ struct tpm_chip *chip;
+ struct st33zp24_platform_data *platform_data;
+
+ err = 0;
+
+ if (client == NULL) {
+ dev_info(&client->dev, "client is NULL. exiting.\n");
+ err = -ENODEV;
+ goto end;
+ }
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_info(&client->dev, "client not i2c capable\n");
+ err = -ENODEV;
+ goto end;
+ }
+
+ chip = tpm_register_hardware(&client->dev, &st_i2c_tpm);
+ if (!chip) {
+ dev_info(&client->dev, "fail chip\n");
+ err = -ENODEV;
+ goto end;
+ }
+
+ platform_data = client->dev.platform_data;
+ platform_data->tpm_i2c_buffer[0] =
+ kmalloc(TPM_BUFSIZE * sizeof(u8), GFP_KERNEL);
+ if (platform_data->tpm_i2c_buffer[0] == NULL) {
+ err = -ENOMEM;
+ goto _tpm_clean_answer;
+ }
+ platform_data->tpm_i2c_buffer[1] =
+ kmalloc(TPM_BUFSIZE * sizeof(u8), GFP_KERNEL);
+ if (platform_data->tpm_i2c_buffer[1] == NULL) {
+ err = -ENOMEM;
+ goto _tpm_clean_response1;
+ }
+
+ TPM_VPRIV(chip) = client;
+
+ chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+ chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
+ chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+ chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+
+ chip->vendor.locality = LOCALITY0;
+
+ if (power_mgt) {
+ err = gpio_request(platform_data->io_lpcpd, "TPM IO_LPCPD");
+ if (err)
+ goto _gpio_init1;
+ gpio_set_value(platform_data->io_lpcpd, 1);
+ }
+
+ if (interrupts) {
+ init_completion(&platform_data->irq_detection);
+ if (request_locality(chip) != LOCALITY0) {
+ err = -ENODEV;
+ goto _tpm_clean_response2;
+ }
+ err = gpio_request(platform_data->io_serirq, "TPM IO_SERIRQ");
+ if (err)
+ goto _gpio_init2;
+
+ clear_interruption(client);
+ err = request_irq(gpio_to_irq(platform_data->io_serirq),
+ &tpm_ioserirq_handler,
+ IRQF_TRIGGER_HIGH,
+ "TPM SERIRQ management", chip);
+ if (err < 0) {
+ dev_err(chip->dev , "TPM SERIRQ signals %d not available\n",
+ gpio_to_irq(platform_data->io_serirq));
+ goto _irq_set;
+ }
+
+ err = I2C_READ_DATA(client, TPM_INT_ENABLE, &intmask, 1);
+ if (err < 0)
+ goto _irq_set;
+
+ intmask |= TPM_INTF_CMD_READY_INT
+ | TPM_INTF_FIFO_AVALAIBLE_INT
+ | TPM_INTF_WAKE_UP_READY_INT
+ | TPM_INTF_LOCALITY_CHANGE_INT
+ | TPM_INTF_STS_VALID_INT
+ | TPM_INTF_DATA_AVAIL_INT;
+
+ err = I2C_WRITE_DATA(client, TPM_INT_ENABLE, &intmask, 1);
+ if (err < 0)
+ goto _irq_set;
+
+ intmask = TPM_GLOBAL_INT_ENABLE;
+ err = I2C_WRITE_DATA(client, (TPM_INT_ENABLE + 3), &intmask, 1);
+ if (err < 0)
+ goto _irq_set;
+
+ err = I2C_READ_DATA(client, TPM_INT_STATUS, &intmask, 1);
+ if (err < 0)
+ goto _irq_set;
+
+ chip->vendor.irq = interrupts;
+
+ tpm_gen_interrupt(chip);
+ }
+
+ tpm_get_timeouts(chip);
+
+ i2c_set_clientdata(client, chip);
+ platform_data->bChipF = false;
+
+ dev_info(chip->dev, "TPM I2C Initialized\n");
+ return 0;
+_irq_set:
+ free_irq(gpio_to_irq(platform_data->io_serirq), (void *) chip);
+_gpio_init2:
+ if (interrupts)
+ gpio_free(platform_data->io_serirq);
+_gpio_init1:
+ if (power_mgt)
+ gpio_free(platform_data->io_lpcpd);
+_tpm_clean_response2:
+ kzfree(platform_data->tpm_i2c_buffer[1]);
+ platform_data->tpm_i2c_buffer[1] = NULL;
+_tpm_clean_response1:
+ kzfree(platform_data->tpm_i2c_buffer[0]);
+ platform_data->tpm_i2c_buffer[0] = NULL;
+_tpm_clean_answer:
+ tpm_remove_hardware(chip->dev);
+ platform_data->bChipF = true;
+end:
+ pr_info("TPM I2C initialisation fail\n");
+ return err;
+}
+
+/*
+ * tpm_st33_i2c_remove remove the TPM device
+ * @param: client, the i2c_client drescription (TPM I2C description).
+ clear_bit(0, &chip->is_open);
+ * @return: 0 in case of success.
+ */
+static __devexit int tpm_st33_i2c_remove(struct i2c_client *client)
+{
+ struct tpm_chip *chip = (struct tpm_chip *)i2c_get_clientdata(client);
+ struct st33zp24_platform_data *pin_infos =
+ ((struct i2c_client *) TPM_VPRIV(chip))->dev.platform_data;
+
+ if (pin_infos != NULL) {
+ free_irq(pin_infos->io_serirq, chip);
+
+ gpio_free(pin_infos->io_serirq);
+ gpio_free(pin_infos->io_lpcpd);
+
+ if (pin_infos->bChipF != true)
+ tpm_remove_hardware(chip->dev);
+ if (pin_infos->tpm_i2c_buffer[1] != NULL) {
+ kzfree(pin_infos->tpm_i2c_buffer[1]);
+ pin_infos->tpm_i2c_buffer[1] = NULL;
+ }
+ if (pin_infos->tpm_i2c_buffer[0] != NULL) {
+ kzfree(pin_infos->tpm_i2c_buffer[0]);
+ pin_infos->tpm_i2c_buffer[0] = NULL;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * tpm_st33_i2c_pm_suspend suspend the TPM device
+ * Added: Work around when suspend and no tpm application is running, suspend
+ * may fail because chip->data_buffer is not set (only set in tpm_open in Linux
+ * TPM core)
+ * @param: client, the i2c_client drescription (TPM I2C description).
+ * @param: mesg, the power management message.
+ * @return: 0 in case of success.
+ */
+static int tpm_st33_i2c_pm_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ struct tpm_chip *chip =
+ (struct tpm_chip *)i2c_get_clientdata(client);
+ struct st33zp24_platform_data *pin_infos =
+ ((struct i2c_client *)TPM_VPRIV(chip))->dev.platform_data;
+ int ret = 0;
+
+ if (power_mgt)
+ gpio_set_value(pin_infos->io_lpcpd, 0);
+ else{
+ if (chip->data_buffer == NULL)
+ chip->data_buffer = pin_infos->tpm_i2c_buffer[0];
+ ret = tpm_pm_suspend(&client->dev);
+ }
+ return ret;
+} /* tpm_st33_i2c_suspend() */
+
+/*
+ * tpm_st33_i2c_pm_resume resume the TPM device
+ * @param: client, the i2c_client drescription (TPM I2C description).
+ * @return: 0 in case of success.
+ */
+static int tpm_st33_i2c_pm_resume(struct i2c_client *client)
+{
+ struct tpm_chip *chip =
+ (struct tpm_chip *)i2c_get_clientdata(client);
+ struct st33zp24_platform_data *pin_infos =
+ ((struct i2c_client *)TPM_VPRIV(chip))->dev.platform_data;
+
+ int ret = 0;
+
+ if (power_mgt) {
+ gpio_set_value(pin_infos->io_lpcpd, 1);
+ ret = wait_for_serirq_timeout(chip,
+ (chip->vendor.status(chip) &
+ TPM_STS_VALID) == TPM_STS_VALID,
+ chip->vendor.timeout_b);
+ } else{
+ if (chip->data_buffer == NULL)
+ chip->data_buffer = pin_infos->tpm_i2c_buffer[0];
+ ret = tpm_pm_resume(&client->dev);
+ if (!ret)
+ tpm_do_selftest(chip);
+ }
+ return ret;
+} /* tpm_st33_i2c_pm_resume() */
+
+static const struct i2c_device_id tpm_st33_i2c_id[] = {
+ {TPM_ST33_I2C, 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, tpm_st33_i2c_id);
+
+static struct i2c_driver tpm_st33_i2c_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = TPM_ST33_I2C,
+ },
+ .probe = tpm_st33_i2c_probe,
+ .remove = tpm_st33_i2c_remove,
+ .resume = tpm_st33_i2c_pm_resume,
+ .suspend = tpm_st33_i2c_pm_suspend,
+ .id_table = tpm_st33_i2c_id
+};
+
+module_i2c_driver(tpm_st33_i2c_driver);
+
+MODULE_AUTHOR("Christophe Ricard (tpmsupport@st.com)");
+MODULE_DESCRIPTION("STM TPM I2C ST33 Driver");
+MODULE_VERSION("1.2.0");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24
+ * Copyright (C) 2009, 2010 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * STMicroelectronics version 1.2.0, Copyright (C) 2010
+ * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
+ * This is free software, and you are welcome to redistribute it
+ * under certain conditions.
+ *
+ * @Author: Christophe RICARD tpmsupport@st.com
+ *
+ * @File: stm_st33_tpm_i2c.h
+ *
+ * @Date: 09/15/2010
+ */
+#ifndef __STM_ST33_TPM_I2C_MAIN_H__
+#define __STM_ST33_TPM_I2C_MAIN_H__
+
+#define TPM_ACCESS (0x0)
+#define TPM_STS (0x18)
+#define TPM_HASH_END (0x20)
+#define TPM_DATA_FIFO (0x24)
+#define TPM_HASH_DATA (0x24)
+#define TPM_HASH_START (0x28)
+#define TPM_INTF_CAPABILITY (0x14)
+#define TPM_INT_STATUS (0x10)
+#define TPM_INT_ENABLE (0x08)
+
+#define TPM_DUMMY_BYTE 0xAA
+#define TPM_WRITE_DIRECTION 0x80
+#define TPM_HEADER_SIZE 10
+#define TPM_BUFSIZE 2048
+
+#define LOCALITY0 0
+
+#define TPM_ST33_I2C "st33zp24_i2c"
+
+struct st33zp24_platform_data {
+ int io_serirq;
+ int io_lpcpd;
+ struct i2c_client *client;
+ bool bChipF;
+ u8 *tpm_i2c_buffer[2]; /* 0 Request 1 Response */
+ struct completion irq_detection;
+ struct mutex lock;
+};
+
+#endif /* __STM_ST33_TPM_I2C_MAIN_H__ */
+++ /dev/null
-/*
- * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24
- * Copyright (C) 2009, 2010 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * STMicroelectronics version 1.2.0, Copyright (C) 2010
- * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
- * This is free software, and you are welcome to redistribute it
- * under certain conditions.
- *
- * @Author: Christophe RICARD tpmsupport@st.com
- *
- * @File: tpm_stm_st33_i2c.c
- *
- * @Synopsis:
- * 09/15/2010: First shot driver tpm_tis driver for
- lpc is used as model.
- */
-
-#include <linux/pci.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/sysfs.h>
-#include <linux/gpio.h>
-#include <linux/sched.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-
-#include "tpm.h"
-#include "tpm_stm_st33_i2c.h"
-
-enum stm33zp24_access {
- TPM_ACCESS_VALID = 0x80,
- TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
- TPM_ACCESS_REQUEST_PENDING = 0x04,
- TPM_ACCESS_REQUEST_USE = 0x02,
-};
-
-enum stm33zp24_status {
- TPM_STS_VALID = 0x80,
- TPM_STS_COMMAND_READY = 0x40,
- TPM_STS_GO = 0x20,
- TPM_STS_DATA_AVAIL = 0x10,
- TPM_STS_DATA_EXPECT = 0x08,
-};
-
-enum stm33zp24_int_flags {
- TPM_GLOBAL_INT_ENABLE = 0x80,
- TPM_INTF_CMD_READY_INT = 0x080,
- TPM_INTF_FIFO_AVALAIBLE_INT = 0x040,
- TPM_INTF_WAKE_UP_READY_INT = 0x020,
- TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
- TPM_INTF_STS_VALID_INT = 0x002,
- TPM_INTF_DATA_AVAIL_INT = 0x001,
-};
-
-enum tis_defaults {
- TIS_SHORT_TIMEOUT = 750,
- TIS_LONG_TIMEOUT = 2000,
-};
-
-/*
- * write8_reg
- * Send byte to the TIS register according to the ST33ZP24 I2C protocol.
- * @param: tpm_register, the tpm tis register where the data should be written
- * @param: tpm_data, the tpm_data to write inside the tpm_register
- * @param: tpm_size, The length of the data
- * @return: Returns negative errno, or else the number of bytes written.
- */
-static int write8_reg(struct i2c_client *client, u8 tpm_register,
- u8 *tpm_data, u16 tpm_size)
-{
- u8 data;
- int value = 0;
- struct st33zp24_platform_data *pin_infos;
-
- pin_infos = client->dev.platform_data;
-
- data = tpm_register;
- memcpy(pin_infos->tpm_i2c_buffer[0], &data, sizeof(data));
- memcpy(pin_infos->tpm_i2c_buffer[0] + 1, tpm_data, tpm_size);
- value = i2c_master_send(client, pin_infos->tpm_i2c_buffer[0],
- tpm_size + 1);
- return value;
-} /* write8_reg() */
-
-/*
- * read8_reg
- * Recv byte from the TIS register according to the ST33ZP24 I2C protocol.
- * @param: tpm_register, the tpm tis register where the data should be read
- * @param: tpm_data, the TPM response
- * @param: tpm_size, tpm TPM response size to read.
- * @return: number of byte read successfully: should be one if success.
- */
-static int read8_reg(struct i2c_client *client, u8 tpm_register,
- u8 *tpm_data, int tpm_size)
-{
- u8 status = 0;
- u8 data;
- struct st33zp24_platform_data *pin_infos;
-
- pin_infos = client->dev.platform_data;
-
- data = TPM_DUMMY_BYTE;
- status = write8_reg(client, tpm_register, &data, 1);
- if (status == 2)
- status = i2c_master_recv(client, tpm_data, tpm_size);
- return status;
-} /* read8_reg() */
-
-/*
- * I2C_WRITE_DATA
- * Send byte to the TIS register according to the ST33ZP24 I2C protocol.
- * @param: client, the chip description
- * @param: tpm_register, the tpm tis register where the data should be written
- * @param: tpm_data, the tpm_data to write inside the tpm_register
- * @param: tpm_size, The length of the data
- * @return: number of byte written successfully: should be one if success.
- */
-#define I2C_WRITE_DATA(client, tpm_register, tpm_data, tpm_size) \
- (write8_reg(client, tpm_register | \
- TPM_WRITE_DIRECTION, tpm_data, tpm_size))
-
-/*
- * I2C_READ_DATA
- * Recv byte from the TIS register according to the ST33ZP24 I2C protocol.
- * @param: tpm, the chip description
- * @param: tpm_register, the tpm tis register where the data should be read
- * @param: tpm_data, the TPM response
- * @param: tpm_size, tpm TPM response size to read.
- * @return: number of byte read successfully: should be one if success.
- */
-#define I2C_READ_DATA(client, tpm_register, tpm_data, tpm_size) \
- (read8_reg(client, tpm_register, tpm_data, tpm_size))
-
-/*
- * clear_interruption
- * clear the TPM interrupt register.
- * @param: tpm, the chip description
- */
-static void clear_interruption(struct i2c_client *client)
-{
- u8 interrupt;
- I2C_READ_DATA(client, TPM_INT_STATUS, &interrupt, 1);
- I2C_WRITE_DATA(client, TPM_INT_STATUS, &interrupt, 1);
- I2C_READ_DATA(client, TPM_INT_STATUS, &interrupt, 1);
-} /* clear_interruption() */
-
-/*
- * _wait_for_interrupt_serirq_timeout
- * @param: tpm, the chip description
- * @param: timeout, the timeout of the interrupt
- * @return: the status of the interruption.
- */
-static long _wait_for_interrupt_serirq_timeout(struct tpm_chip *chip,
- unsigned long timeout)
-{
- long status;
- struct i2c_client *client;
- struct st33zp24_platform_data *pin_infos;
-
- client = (struct i2c_client *) TPM_VPRIV(chip);
- pin_infos = client->dev.platform_data;
-
- status = wait_for_completion_interruptible_timeout(
- &pin_infos->irq_detection,
- timeout);
- if (status > 0)
- enable_irq(gpio_to_irq(pin_infos->io_serirq));
- gpio_direction_input(pin_infos->io_serirq);
-
- return status;
-} /* wait_for_interrupt_serirq_timeout() */
-
-static int wait_for_serirq_timeout(struct tpm_chip *chip, bool condition,
- unsigned long timeout)
-{
- int status = 2;
- struct i2c_client *client;
- struct st33zp24_platform_data *pin_infos;
-
- client = (struct i2c_client *) TPM_VPRIV(chip);
- pin_infos = client->dev.platform_data;
-
- status = _wait_for_interrupt_serirq_timeout(chip, timeout);
- if (!status) {
- status = -EBUSY;
- } else{
- clear_interruption(client);
- if (condition)
- status = 1;
- }
- return status;
-}
-
-/*
- * tpm_stm_i2c_cancel, cancel is not implemented.
- * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
- */
-static void tpm_stm_i2c_cancel(struct tpm_chip *chip)
-{
- struct i2c_client *client;
- u8 data;
-
- client = (struct i2c_client *) TPM_VPRIV(chip);
-
- data = TPM_STS_COMMAND_READY;
- I2C_WRITE_DATA(client, TPM_STS, &data, 1);
- if (chip->vendor.irq)
- wait_for_serirq_timeout(chip, 1, chip->vendor.timeout_a);
-} /* tpm_stm_i2c_cancel() */
-
-/*
- * tpm_stm_spi_status return the TPM_STS register
- * @param: chip, the tpm chip description
- * @return: the TPM_STS register value.
- */
-static u8 tpm_stm_i2c_status(struct tpm_chip *chip)
-{
- struct i2c_client *client;
- u8 data;
- client = (struct i2c_client *) TPM_VPRIV(chip);
-
- I2C_READ_DATA(client, TPM_STS, &data, 1);
- return data;
-} /* tpm_stm_i2c_status() */
-
-
-/*
- * check_locality if the locality is active
- * @param: chip, the tpm chip description
- * @return: the active locality or -EACCESS.
- */
-static int check_locality(struct tpm_chip *chip)
-{
- struct i2c_client *client;
- u8 data;
- u8 status;
-
- client = (struct i2c_client *) TPM_VPRIV(chip);
-
- status = I2C_READ_DATA(client, TPM_ACCESS, &data, 1);
- if (status && (data &
- (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
- (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
- return chip->vendor.locality;
-
- return -EACCES;
-
-} /* check_locality() */
-
-/*
- * request_locality request the TPM locality
- * @param: chip, the chip description
- * @return: the active locality or EACCESS.
- */
-static int request_locality(struct tpm_chip *chip)
-{
- unsigned long stop;
- long rc;
- struct i2c_client *client;
- u8 data;
-
- client = (struct i2c_client *) TPM_VPRIV(chip);
-
- if (check_locality(chip) == chip->vendor.locality)
- return chip->vendor.locality;
-
- data = TPM_ACCESS_REQUEST_USE;
- rc = I2C_WRITE_DATA(client, TPM_ACCESS, &data, 1);
- if (rc < 0)
- goto end;
-
- if (chip->vendor.irq) {
- rc = wait_for_serirq_timeout(chip, (check_locality
- (chip) >= 0),
- chip->vendor.timeout_a);
- if (rc > 0)
- return chip->vendor.locality;
- } else{
- stop = jiffies + chip->vendor.timeout_a;
- do {
- if (check_locality(chip) >= 0)
- return chip->vendor.locality;
- msleep(TPM_TIMEOUT);
- } while (time_before(jiffies, stop));
- }
- rc = -EACCES;
-end:
- return rc;
-} /* request_locality() */
-
-/*
- * release_locality release the active locality
- * @param: chip, the tpm chip description.
- */
-static void release_locality(struct tpm_chip *chip)
-{
- struct i2c_client *client;
- u8 data;
-
- client = (struct i2c_client *) TPM_VPRIV(chip);
- data = TPM_ACCESS_ACTIVE_LOCALITY;
-
- I2C_WRITE_DATA(client, TPM_ACCESS, &data, 1);
-}
-
-/*
- * get_burstcount return the burstcount address 0x19 0x1A
- * @param: chip, the chip description
- * return: the burstcount.
- */
-static int get_burstcount(struct tpm_chip *chip)
-{
- unsigned long stop;
- int burstcnt, status;
- u8 tpm_reg, temp;
-
- struct i2c_client *client = (struct i2c_client *) TPM_VPRIV(chip);
-
- stop = jiffies + chip->vendor.timeout_d;
- do {
- tpm_reg = TPM_STS + 1;
- status = I2C_READ_DATA(client, tpm_reg, &temp, 1);
- if (status < 0)
- goto end;
-
- tpm_reg = tpm_reg + 1;
- burstcnt = temp;
- status = I2C_READ_DATA(client, tpm_reg, &temp, 1);
- if (status < 0)
- goto end;
-
- burstcnt |= temp << 8;
- if (burstcnt)
- return burstcnt;
- msleep(TPM_TIMEOUT);
- } while (time_before(jiffies, stop));
-
-end:
- return -EBUSY;
-} /* get_burstcount() */
-
-/*
- * wait_for_stat wait for a TPM_STS value
- * @param: chip, the tpm chip description
- * @param: mask, the value mask to wait
- * @param: timeout, the timeout
- * @param: queue, the wait queue.
- * @return: the tpm status, 0 if success, -ETIME if timeout is reached.
- */
-static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
- wait_queue_head_t *queue)
-{
- unsigned long stop;
- long rc;
- u8 status;
-
- if (chip->vendor.irq) {
- rc = wait_for_serirq_timeout(chip, ((tpm_stm_i2c_status
- (chip) & mask) ==
- mask), timeout);
- if (rc > 0)
- return 0;
- } else{
- stop = jiffies + timeout;
- do {
- msleep(TPM_TIMEOUT);
- status = tpm_stm_i2c_status(chip);
- if ((status & mask) == mask)
- return 0;
- } while (time_before(jiffies, stop));
- }
- return -ETIME;
-} /* wait_for_stat() */
-
-/*
- * recv_data receive data
- * @param: chip, the tpm chip description
- * @param: buf, the buffer where the data are received
- * @param: count, the number of data to receive
- * @return: the number of bytes read from TPM FIFO.
- */
-static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
-{
- int size = 0, burstcnt, len;
- struct i2c_client *client;
-
- client = (struct i2c_client *) TPM_VPRIV(chip);
-
- while (size < count &&
- wait_for_stat(chip,
- TPM_STS_DATA_AVAIL | TPM_STS_VALID,
- chip->vendor.timeout_c,
- &chip->vendor.read_queue)
- == 0) {
- burstcnt = get_burstcount(chip);
- len = min_t(int, burstcnt, count - size);
- I2C_READ_DATA(client, TPM_DATA_FIFO, buf + size, len);
- size += len;
- }
- return size;
-}
-
-/*
- * tpm_ioserirq_handler the serirq irq handler
- * @param: irq, the tpm chip description
- * @param: dev_id, the description of the chip
- * @return: the status of the handler.
- */
-static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
-{
- struct tpm_chip *chip = dev_id;
- struct i2c_client *client;
- struct st33zp24_platform_data *pin_infos;
-
- disable_irq_nosync(irq);
-
- client = (struct i2c_client *) TPM_VPRIV(chip);
- pin_infos = client->dev.platform_data;
-
- complete(&pin_infos->irq_detection);
- return IRQ_HANDLED;
-} /* tpm_ioserirq_handler() */
-
-
-/*
- * tpm_stm_i2c_send send TPM commands through the I2C bus.
- *
- * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
- * @param: buf, the buffer to send.
- * @param: count, the number of bytes to send.
- * @return: In case of success the number of bytes sent.
- * In other case, a < 0 value describing the issue.
- */
-static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
- size_t len)
-{
- u32 ordinal,
- status,
- burstcnt = 0, i, size;
- int ret;
- u8 data;
- struct i2c_client *client;
- struct st33zp24_platform_data *pin_infos;
-
- if (chip == NULL)
- return -EBUSY;
- if (len < TPM_HEADER_SIZE)
- return -EBUSY;
-
- client = (struct i2c_client *)TPM_VPRIV(chip);
- pin_infos = client->dev.platform_data;
-
- ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
-
- client->flags = 0;
-
- ret = request_locality(chip);
- if (ret < 0)
- return ret;
-
- status = tpm_stm_i2c_status(chip);
- if ((status & TPM_STS_COMMAND_READY) == 0) {
- tpm_stm_i2c_cancel(chip);
- if (wait_for_stat
- (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b,
- &chip->vendor.int_queue) < 0) {
- ret = -ETIME;
- goto out_err;
- }
- }
-
- for (i = 0 ; i < len - 1 ;) {
- burstcnt = get_burstcount(chip);
- size = min_t(int, len - i - 1, burstcnt);
- ret = I2C_WRITE_DATA(client, TPM_DATA_FIFO, buf, size);
- if (ret < 0)
- goto out_err;
-
- i += size;
- }
-
- status = tpm_stm_i2c_status(chip);
- if ((status & TPM_STS_DATA_EXPECT) == 0) {
- ret = -EIO;
- goto out_err;
- }
-
- ret = I2C_WRITE_DATA(client, TPM_DATA_FIFO, buf + len - 1, 1);
- if (ret < 0)
- goto out_err;
-
- status = tpm_stm_i2c_status(chip);
- if ((status & TPM_STS_DATA_EXPECT) != 0) {
- ret = -EIO;
- goto out_err;
- }
-
- data = TPM_STS_GO;
- I2C_WRITE_DATA(client, TPM_STS, &data, 1);
-
- return len;
-out_err:
- tpm_stm_i2c_cancel(chip);
- release_locality(chip);
- return ret;
-}
-
-/*
- * tpm_stm_i2c_recv received TPM response through the I2C bus.
- * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
- * @param: buf, the buffer to store datas.
- * @param: count, the number of bytes to send.
- * @return: In case of success the number of bytes received.
- * In other case, a < 0 value describing the issue.
- */
-static int tpm_stm_i2c_recv(struct tpm_chip *chip, unsigned char *buf,
- size_t count)
-{
- int size = 0;
- int expected;
-
- struct i2c_client *client;
- struct st33zp24_platform_data *pin_infos;
-
- if (chip == NULL)
- return -EBUSY;
-
- client = (struct i2c_client *)TPM_VPRIV(chip);
- pin_infos = client->dev.platform_data;
-
- if (count < TPM_HEADER_SIZE) {
- size = -EIO;
- goto out;
- }
-
- size = recv_data(chip, buf, TPM_HEADER_SIZE);
- if (size < TPM_HEADER_SIZE) {
- dev_err(chip->dev, "Unable to read header\n");
- goto out;
- }
-
- expected = be32_to_cpu(*(__be32 *) (buf + 2));
- if (expected > count) {
- size = -EIO;
- goto out;
- }
-
- size += recv_data(chip, &buf[TPM_HEADER_SIZE],
- expected - TPM_HEADER_SIZE);
- if (size < expected) {
- dev_err(chip->dev, "Unable to read remainder of result\n");
- size = -ETIME;
- goto out;
- }
-
-out:
- chip->vendor.cancel(chip);
- release_locality(chip);
- return size;
-}
-
-static const struct file_operations tpm_st33_i2c_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .read = tpm_read,
- .write = tpm_write,
- .open = tpm_open,
- .release = tpm_release,
-};
-
-static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
-static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
-static DEVICE_ATTR(enabled, S_IRUGO, tpm_show_enabled, NULL);
-static DEVICE_ATTR(active, S_IRUGO, tpm_show_active, NULL);
-static DEVICE_ATTR(owned, S_IRUGO, tpm_show_owned, NULL);
-static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated, NULL);
-static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
-static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
-
-static struct attribute *stm_tpm_attrs[] = {
- &dev_attr_pubek.attr,
- &dev_attr_pcrs.attr,
- &dev_attr_enabled.attr,
- &dev_attr_active.attr,
- &dev_attr_owned.attr,
- &dev_attr_temp_deactivated.attr,
- &dev_attr_caps.attr,
- &dev_attr_cancel.attr, NULL,
-};
-
-static struct attribute_group stm_tpm_attr_grp = {
- .attrs = stm_tpm_attrs
-};
-
-static struct tpm_vendor_specific st_i2c_tpm = {
- .send = tpm_stm_i2c_send,
- .recv = tpm_stm_i2c_recv,
- .cancel = tpm_stm_i2c_cancel,
- .status = tpm_stm_i2c_status,
- .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
- .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
- .req_canceled = TPM_STS_COMMAND_READY,
- .attr_group = &stm_tpm_attr_grp,
- .miscdev = {.fops = &tpm_st33_i2c_fops,},
-};
-
-static int interrupts ;
-module_param(interrupts, int, 0444);
-MODULE_PARM_DESC(interrupts, "Enable interrupts");
-
-static int power_mgt = 1;
-module_param(power_mgt, int, 0444);
-MODULE_PARM_DESC(power_mgt, "Power Management");
-
-/*
- * tpm_st33_i2c_probe initialize the TPM device
- * @param: client, the i2c_client drescription (TPM I2C description).
- * @param: id, the i2c_device_id struct.
- * @return: 0 in case of success.
- * -1 in other case.
- */
-static int
-tpm_st33_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id)
-{
- int err;
- u8 intmask;
- struct tpm_chip *chip;
- struct st33zp24_platform_data *platform_data;
-
- err = 0;
-
- if (client == NULL) {
- dev_info(&client->dev, "client is NULL. exiting.\n");
- err = -ENODEV;
- goto end;
- }
-
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
- dev_info(&client->dev, "client not i2c capable\n");
- err = -ENODEV;
- goto end;
- }
-
- chip = tpm_register_hardware(&client->dev, &st_i2c_tpm);
- if (!chip) {
- dev_info(&client->dev, "fail chip\n");
- err = -ENODEV;
- goto end;
- }
-
- platform_data = client->dev.platform_data;
- platform_data->tpm_i2c_buffer[0] =
- kmalloc(TPM_BUFSIZE * sizeof(u8), GFP_KERNEL);
- if (platform_data->tpm_i2c_buffer[0] == NULL) {
- err = -ENOMEM;
- goto _tpm_clean_answer;
- }
- platform_data->tpm_i2c_buffer[1] =
- kmalloc(TPM_BUFSIZE * sizeof(u8), GFP_KERNEL);
- if (platform_data->tpm_i2c_buffer[1] == NULL) {
- err = -ENOMEM;
- goto _tpm_clean_response1;
- }
-
- TPM_VPRIV(chip) = client;
-
- chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
- chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
- chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
- chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
-
- chip->vendor.locality = LOCALITY0;
-
- if (power_mgt) {
- err = gpio_request(platform_data->io_lpcpd, "TPM IO_LPCPD");
- if (err)
- goto _gpio_init1;
- gpio_set_value(platform_data->io_lpcpd, 1);
- }
-
- if (interrupts) {
- init_completion(&platform_data->irq_detection);
- if (request_locality(chip) != LOCALITY0) {
- err = -ENODEV;
- goto _tpm_clean_response2;
- }
- err = gpio_request(platform_data->io_serirq, "TPM IO_SERIRQ");
- if (err)
- goto _gpio_init2;
-
- clear_interruption(client);
- err = request_irq(gpio_to_irq(platform_data->io_serirq),
- &tpm_ioserirq_handler,
- IRQF_TRIGGER_HIGH,
- "TPM SERIRQ management", chip);
- if (err < 0) {
- dev_err(chip->dev , "TPM SERIRQ signals %d not available\n",
- gpio_to_irq(platform_data->io_serirq));
- goto _irq_set;
- }
-
- err = I2C_READ_DATA(client, TPM_INT_ENABLE, &intmask, 1);
- if (err < 0)
- goto _irq_set;
-
- intmask |= TPM_INTF_CMD_READY_INT
- | TPM_INTF_FIFO_AVALAIBLE_INT
- | TPM_INTF_WAKE_UP_READY_INT
- | TPM_INTF_LOCALITY_CHANGE_INT
- | TPM_INTF_STS_VALID_INT
- | TPM_INTF_DATA_AVAIL_INT;
-
- err = I2C_WRITE_DATA(client, TPM_INT_ENABLE, &intmask, 1);
- if (err < 0)
- goto _irq_set;
-
- intmask = TPM_GLOBAL_INT_ENABLE;
- err = I2C_WRITE_DATA(client, (TPM_INT_ENABLE + 3), &intmask, 1);
- if (err < 0)
- goto _irq_set;
-
- err = I2C_READ_DATA(client, TPM_INT_STATUS, &intmask, 1);
- if (err < 0)
- goto _irq_set;
-
- chip->vendor.irq = interrupts;
-
- tpm_gen_interrupt(chip);
- }
-
- tpm_get_timeouts(chip);
-
- i2c_set_clientdata(client, chip);
- platform_data->bChipF = false;
-
- dev_info(chip->dev, "TPM I2C Initialized\n");
- return 0;
-_irq_set:
- free_irq(gpio_to_irq(platform_data->io_serirq), (void *) chip);
-_gpio_init2:
- if (interrupts)
- gpio_free(platform_data->io_serirq);
-_gpio_init1:
- if (power_mgt)
- gpio_free(platform_data->io_lpcpd);
-_tpm_clean_response2:
- kzfree(platform_data->tpm_i2c_buffer[1]);
- platform_data->tpm_i2c_buffer[1] = NULL;
-_tpm_clean_response1:
- kzfree(platform_data->tpm_i2c_buffer[0]);
- platform_data->tpm_i2c_buffer[0] = NULL;
-_tpm_clean_answer:
- tpm_remove_hardware(chip->dev);
- platform_data->bChipF = true;
-end:
- pr_info("TPM I2C initialisation fail\n");
- return err;
-}
-
-/*
- * tpm_st33_i2c_remove remove the TPM device
- * @param: client, the i2c_client drescription (TPM I2C description).
- clear_bit(0, &chip->is_open);
- * @return: 0 in case of success.
- */
-static __devexit int tpm_st33_i2c_remove(struct i2c_client *client)
-{
- struct tpm_chip *chip = (struct tpm_chip *)i2c_get_clientdata(client);
- struct st33zp24_platform_data *pin_infos =
- ((struct i2c_client *) TPM_VPRIV(chip))->dev.platform_data;
-
- if (pin_infos != NULL) {
- free_irq(pin_infos->io_serirq, chip);
-
- gpio_free(pin_infos->io_serirq);
- gpio_free(pin_infos->io_lpcpd);
-
- if (pin_infos->bChipF != true)
- tpm_remove_hardware(chip->dev);
- if (pin_infos->tpm_i2c_buffer[1] != NULL) {
- kzfree(pin_infos->tpm_i2c_buffer[1]);
- pin_infos->tpm_i2c_buffer[1] = NULL;
- }
- if (pin_infos->tpm_i2c_buffer[0] != NULL) {
- kzfree(pin_infos->tpm_i2c_buffer[0]);
- pin_infos->tpm_i2c_buffer[0] = NULL;
- }
- }
-
- return 0;
-}
-
-/*
- * tpm_st33_i2c_pm_suspend suspend the TPM device
- * Added: Work around when suspend and no tpm application is running, suspend
- * may fail because chip->data_buffer is not set (only set in tpm_open in Linux
- * TPM core)
- * @param: client, the i2c_client drescription (TPM I2C description).
- * @param: mesg, the power management message.
- * @return: 0 in case of success.
- */
-static int tpm_st33_i2c_pm_suspend(struct i2c_client *client, pm_message_t mesg)
-{
- struct tpm_chip *chip =
- (struct tpm_chip *)i2c_get_clientdata(client);
- struct st33zp24_platform_data *pin_infos =
- ((struct i2c_client *)TPM_VPRIV(chip))->dev.platform_data;
- int ret = 0;
-
- if (power_mgt)
- gpio_set_value(pin_infos->io_lpcpd, 0);
- else{
- if (chip->data_buffer == NULL)
- chip->data_buffer = pin_infos->tpm_i2c_buffer[0];
- ret = tpm_pm_suspend(&client->dev);
- }
- return ret;
-} /* tpm_st33_i2c_suspend() */
-
-/*
- * tpm_st33_i2c_pm_resume resume the TPM device
- * @param: client, the i2c_client drescription (TPM I2C description).
- * @return: 0 in case of success.
- */
-static int tpm_st33_i2c_pm_resume(struct i2c_client *client)
-{
- struct tpm_chip *chip =
- (struct tpm_chip *)i2c_get_clientdata(client);
- struct st33zp24_platform_data *pin_infos =
- ((struct i2c_client *)TPM_VPRIV(chip))->dev.platform_data;
-
- int ret = 0;
-
- if (power_mgt) {
- gpio_set_value(pin_infos->io_lpcpd, 1);
- ret = wait_for_serirq_timeout(chip,
- (chip->vendor.status(chip) &
- TPM_STS_VALID) == TPM_STS_VALID,
- chip->vendor.timeout_b);
- } else{
- if (chip->data_buffer == NULL)
- chip->data_buffer = pin_infos->tpm_i2c_buffer[0];
- ret = tpm_pm_resume(&client->dev);
- if (!ret)
- tpm_do_selftest(chip);
- }
- return ret;
-} /* tpm_st33_i2c_pm_resume() */
-
-static const struct i2c_device_id tpm_st33_i2c_id[] = {
- {TPM_ST33_I2C, 0},
- {}
-};
-
-MODULE_DEVICE_TABLE(i2c, tpm_st33_i2c_id);
-
-static struct i2c_driver tpm_st33_i2c_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = TPM_ST33_I2C,
- },
- .probe = tpm_st33_i2c_probe,
- .remove = tpm_st33_i2c_remove,
- .resume = tpm_st33_i2c_pm_resume,
- .suspend = tpm_st33_i2c_pm_suspend,
- .id_table = tpm_st33_i2c_id
-};
-
-module_i2c_driver(tpm_st33_i2c_driver);
-
-MODULE_AUTHOR("Christophe Ricard (tpmsupport@st.com)");
-MODULE_DESCRIPTION("STM TPM I2C ST33 Driver");
-MODULE_VERSION("1.2.0");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24
- * Copyright (C) 2009, 2010 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * STMicroelectronics version 1.2.0, Copyright (C) 2010
- * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
- * This is free software, and you are welcome to redistribute it
- * under certain conditions.
- *
- * @Author: Christophe RICARD tpmsupport@st.com
- *
- * @File: stm_st33_tpm_i2c.h
- *
- * @Date: 09/15/2010
- */
-#ifndef __STM_ST33_TPM_I2C_MAIN_H__
-#define __STM_ST33_TPM_I2C_MAIN_H__
-
-#define TPM_ACCESS (0x0)
-#define TPM_STS (0x18)
-#define TPM_HASH_END (0x20)
-#define TPM_DATA_FIFO (0x24)
-#define TPM_HASH_DATA (0x24)
-#define TPM_HASH_START (0x28)
-#define TPM_INTF_CAPABILITY (0x14)
-#define TPM_INT_STATUS (0x10)
-#define TPM_INT_ENABLE (0x08)
-
-#define TPM_DUMMY_BYTE 0xAA
-#define TPM_WRITE_DIRECTION 0x80
-#define TPM_HEADER_SIZE 10
-#define TPM_BUFSIZE 2048
-
-#define LOCALITY0 0
-
-#define TPM_ST33_I2C "st33zp24_i2c"
-
-struct st33zp24_platform_data {
- int io_serirq;
- int io_lpcpd;
- struct i2c_client *client;
- bool bChipF;
- u8 *tpm_i2c_buffer[2]; /* 0 Request 1 Response */
- struct completion irq_detection;
- struct mutex lock;
-};
-
-#endif /* __STM_ST33_TPM_I2C_MAIN_H__ */
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff