--- /dev/null
+/*
+ * mxc-ssi.c -- SSI driver for Freescale IMX
+ *
+ * Copyright 2006 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood
+ * liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * Based on mxc-alsa-mc13783 (C) 2006 Freescale.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * TODO:
+ * Need to rework SSI register defs when new defs go into mainline.
+ * Add support for TDM and FIFO 1.
+ * Add support for i.mx3x DMA interface.
+ *
+ */
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <mach/dma-mx1-mx2.h>
+#include <asm/mach-types.h>
+
+#include "mxc-ssi.h"
+#include "mx1_mx2-pcm.h"
+
+#define SSI1_PORT 0
+#define SSI2_PORT 1
+
+static int ssi_active[2] = {0, 0};
+
+/* DMA information for mx1_mx2 platforms */
+static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_out0 = {
+ .name = "SSI1 PCM Stereo out 0",
+ .transfer_type = DMA_MODE_WRITE,
+ .per_address = SSI1_BASE_ADDR + STX0,
+ .event_id = DMA_REQ_SSI1_TX0,
+ .watermark_level = TXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_out1 = {
+ .name = "SSI1 PCM Stereo out 1",
+ .transfer_type = DMA_MODE_WRITE,
+ .per_address = SSI1_BASE_ADDR + STX1,
+ .event_id = DMA_REQ_SSI1_TX1,
+ .watermark_level = TXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_in0 = {
+ .name = "SSI1 PCM Stereo in 0",
+ .transfer_type = DMA_MODE_READ,
+ .per_address = SSI1_BASE_ADDR + SRX0,
+ .event_id = DMA_REQ_SSI1_RX0,
+ .watermark_level = RXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_in1 = {
+ .name = "SSI1 PCM Stereo in 1",
+ .transfer_type = DMA_MODE_READ,
+ .per_address = SSI1_BASE_ADDR + SRX1,
+ .event_id = DMA_REQ_SSI1_RX1,
+ .watermark_level = RXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_out0 = {
+ .name = "SSI2 PCM Stereo out 0",
+ .transfer_type = DMA_MODE_WRITE,
+ .per_address = SSI2_BASE_ADDR + STX0,
+ .event_id = DMA_REQ_SSI2_TX0,
+ .watermark_level = TXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_out1 = {
+ .name = "SSI2 PCM Stereo out 1",
+ .transfer_type = DMA_MODE_WRITE,
+ .per_address = SSI2_BASE_ADDR + STX1,
+ .event_id = DMA_REQ_SSI2_TX1,
+ .watermark_level = TXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_in0 = {
+ .name = "SSI2 PCM Stereo in 0",
+ .transfer_type = DMA_MODE_READ,
+ .per_address = SSI2_BASE_ADDR + SRX0,
+ .event_id = DMA_REQ_SSI2_RX0,
+ .watermark_level = RXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_in1 = {
+ .name = "SSI2 PCM Stereo in 1",
+ .transfer_type = DMA_MODE_READ,
+ .per_address = SSI2_BASE_ADDR + SRX1,
+ .event_id = DMA_REQ_SSI2_RX1,
+ .watermark_level = RXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct clk *ssi_clk0, *ssi_clk1;
+
+int get_ssi_clk(int ssi, struct device *dev)
+{
+ switch (ssi) {
+ case 0:
+ ssi_clk0 = clk_get(dev, "ssi1");
+ if (IS_ERR(ssi_clk0))
+ return PTR_ERR(ssi_clk0);
+ return 0;
+ case 1:
+ ssi_clk1 = clk_get(dev, "ssi2");
+ if (IS_ERR(ssi_clk1))
+ return PTR_ERR(ssi_clk1);
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+EXPORT_SYMBOL(get_ssi_clk);
+
+void put_ssi_clk(int ssi)
+{
+ switch (ssi) {
+ case 0:
+ clk_put(ssi_clk0);
+ ssi_clk0 = NULL;
+ break;
+ case 1:
+ clk_put(ssi_clk1);
+ ssi_clk1 = NULL;
+ break;
+ }
+}
+EXPORT_SYMBOL(put_ssi_clk);
+
+/*
+ * SSI system clock configuration.
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ */
+static int imx_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ u32 scr;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ scr = SSI1_SCR;
+ pr_debug("%s: SCR for SSI1 is %x\n", __func__, scr);
+ } else {
+ scr = SSI2_SCR;
+ pr_debug("%s: SCR for SSI2 is %x\n", __func__, scr);
+ }
+
+ if (scr & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+
+ switch (clk_id) {
+ case IMX_SSP_SYS_CLK:
+ if (dir == SND_SOC_CLOCK_OUT) {
+ scr |= SSI_SCR_SYS_CLK_EN;
+ pr_debug("%s: clk of is output\n", __func__);
+ } else {
+ scr &= ~SSI_SCR_SYS_CLK_EN;
+ pr_debug("%s: clk of is input\n", __func__);
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ pr_debug("%s: writeback of SSI1_SCR\n", __func__);
+ SSI1_SCR = scr;
+ } else {
+ pr_debug("%s: writeback of SSI2_SCR\n", __func__);
+ SSI2_SCR = scr;
+ }
+
+ return 0;
+}
+
+/*
+ * SSI Clock dividers
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ */
+static int imx_ssi_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
+ int div_id, int div)
+{
+ u32 stccr, srccr;
+
+ pr_debug("%s\n", __func__);
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ if (SSI1_SCR & SSI_SCR_SSIEN)
+ return 0;
+ srccr = SSI1_STCCR;
+ stccr = SSI1_STCCR;
+ } else {
+ if (SSI2_SCR & SSI_SCR_SSIEN)
+ return 0;
+ srccr = SSI2_STCCR;
+ stccr = SSI2_STCCR;
+ }
+
+ switch (div_id) {
+ case IMX_SSI_TX_DIV_2:
+ stccr &= ~SSI_STCCR_DIV2;
+ stccr |= div;
+ break;
+ case IMX_SSI_TX_DIV_PSR:
+ stccr &= ~SSI_STCCR_PSR;
+ stccr |= div;
+ break;
+ case IMX_SSI_TX_DIV_PM:
+ stccr &= ~0xff;
+ stccr |= SSI_STCCR_PM(div);
+ break;
+ case IMX_SSI_RX_DIV_2:
+ stccr &= ~SSI_STCCR_DIV2;
+ stccr |= div;
+ break;
+ case IMX_SSI_RX_DIV_PSR:
+ stccr &= ~SSI_STCCR_PSR;
+ stccr |= div;
+ break;
+ case IMX_SSI_RX_DIV_PM:
+ stccr &= ~0xff;
+ stccr |= SSI_STCCR_PM(div);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ SSI1_STCCR = stccr;
+ SSI1_SRCCR = srccr;
+ } else {
+ SSI2_STCCR = stccr;
+ SSI2_SRCCR = srccr;
+ }
+ return 0;
+}
+
+/*
+ * SSI Network Mode or TDM slots configuration.
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ */
+static int imx_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
+ unsigned int mask, int slots)
+{
+ u32 stmsk, srmsk, stccr;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ if (SSI1_SCR & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+ stccr = SSI1_STCCR;
+ } else {
+ if (SSI2_SCR & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+ stccr = SSI2_STCCR;
+ }
+
+ stmsk = srmsk = mask;
+ stccr &= ~SSI_STCCR_DC_MASK;
+ stccr |= SSI_STCCR_DC(slots - 1);
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ SSI1_STMSK = stmsk;
+ SSI1_SRMSK = srmsk;
+ SSI1_SRCCR = SSI1_STCCR = stccr;
+ } else {
+ SSI2_STMSK = stmsk;
+ SSI2_SRMSK = srmsk;
+ SSI2_SRCCR = SSI2_STCCR = stccr;
+ }
+
+ return 0;
+}
+
+/*
+ * SSI DAI format configuration.
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ * Note: We don't use the I2S modes but instead manually configure the
+ * SSI for I2S.
+ */
+static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+ unsigned int fmt)
+{
+ u32 stcr = 0, srcr = 0, scr;
+
+ /*
+ * This is done to avoid this function to modify
+ * previous set values in stcr
+ */
+ stcr = SSI1_STCR;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+ scr = SSI1_SCR & ~(SSI_SCR_SYN | SSI_SCR_NET);
+ else
+ scr = SSI2_SCR & ~(SSI_SCR_SYN | SSI_SCR_NET);
+
+ if (scr & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+
+ /* DAI mode */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ /* data on rising edge of bclk, frame low 1clk before data */
+ stcr |= SSI_STCR_TFSI | SSI_STCR_TEFS | SSI_STCR_TXBIT0;
+ srcr |= SSI_SRCR_RFSI | SSI_SRCR_REFS | SSI_SRCR_RXBIT0;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ /* data on rising edge of bclk, frame high with data */
+ stcr |= SSI_STCR_TXBIT0;
+ srcr |= SSI_SRCR_RXBIT0;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ /* data on rising edge of bclk, frame high with data */
+ stcr |= SSI_STCR_TFSL;
+ srcr |= SSI_SRCR_RFSL;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ /* data on rising edge of bclk, frame high 1clk before data */
+ stcr |= SSI_STCR_TFSL | SSI_STCR_TEFS;
+ srcr |= SSI_SRCR_RFSL | SSI_SRCR_REFS;
+ break;
+ }
+
+ /* DAI clock inversion */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_IB_IF:
+ stcr |= SSI_STCR_TFSI;
+ stcr &= ~SSI_STCR_TSCKP;
+ srcr |= SSI_SRCR_RFSI;
+ srcr &= ~SSI_SRCR_RSCKP;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ stcr &= ~(SSI_STCR_TSCKP | SSI_STCR_TFSI);
+ srcr &= ~(SSI_SRCR_RSCKP | SSI_SRCR_RFSI);
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ stcr |= SSI_STCR_TFSI | SSI_STCR_TSCKP;
+ srcr |= SSI_SRCR_RFSI | SSI_SRCR_RSCKP;
+ break;
+ case SND_SOC_DAIFMT_NB_NF:
+ stcr &= ~SSI_STCR_TFSI;
+ stcr |= SSI_STCR_TSCKP;
+ srcr &= ~SSI_SRCR_RFSI;
+ srcr |= SSI_SRCR_RSCKP;
+ break;
+ }
+
+ /* DAI clock master masks */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ stcr |= SSI_STCR_TFDIR | SSI_STCR_TXDIR;
+ srcr |= SSI_SRCR_RFDIR | SSI_SRCR_RXDIR;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ stcr |= SSI_STCR_TFDIR;
+ srcr |= SSI_SRCR_RFDIR;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM:
+ stcr |= SSI_STCR_TXDIR;
+ srcr |= SSI_SRCR_RXDIR;
+ break;
+ }
+
+ /* sync */
+ if (!(fmt & SND_SOC_DAIFMT_ASYNC))
+ scr |= SSI_SCR_SYN;
+
+ /* tdm - only for stereo atm */
+ if (fmt & SND_SOC_DAIFMT_TDM)
+ scr |= SSI_SCR_NET;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ SSI1_STCR = stcr;
+ SSI1_SRCR = srcr;
+ SSI1_SCR = scr;
+ } else {
+ SSI2_STCR = stcr;
+ SSI2_SRCR = srcr;
+ SSI2_SCR = scr;
+ }
+
+ return 0;
+}
+
+static int imx_ssi_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ /* set up TX DMA params */
+ switch (cpu_dai->id) {
+ case IMX_DAI_SSI0:
+ cpu_dai->dma_data = &imx_ssi1_pcm_stereo_out0;
+ break;
+ case IMX_DAI_SSI1:
+ cpu_dai->dma_data = &imx_ssi1_pcm_stereo_out1;
+ break;
+ case IMX_DAI_SSI2:
+ cpu_dai->dma_data = &imx_ssi2_pcm_stereo_out0;
+ break;
+ case IMX_DAI_SSI3:
+ cpu_dai->dma_data = &imx_ssi2_pcm_stereo_out1;
+ }
+ pr_debug("%s: (playback)\n", __func__);
+ } else {
+ /* set up RX DMA params */
+ switch (cpu_dai->id) {
+ case IMX_DAI_SSI0:
+ cpu_dai->dma_data = &imx_ssi1_pcm_stereo_in0;
+ break;
+ case IMX_DAI_SSI1:
+ cpu_dai->dma_data = &imx_ssi1_pcm_stereo_in1;
+ break;
+ case IMX_DAI_SSI2:
+ cpu_dai->dma_data = &imx_ssi2_pcm_stereo_in0;
+ break;
+ case IMX_DAI_SSI3:
+ cpu_dai->dma_data = &imx_ssi2_pcm_stereo_in1;
+ }
+ pr_debug("%s: (capture)\n", __func__);
+ }
+
+ /*
+ * we cant really change any SSI values after SSI is enabled
+ * need to fix in software for max flexibility - lrg
+ */
+ if (cpu_dai->active) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+
+ /* reset the SSI port - Sect 45.4.4 */
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+
+ if (!ssi_clk0)
+ return -EINVAL;
+
+ if (ssi_active[SSI1_PORT]++) {
+ pr_debug("%s: exit before reset\n", __func__);
+ return 0;
+ }
+
+ /* SSI1 Reset */
+ SSI1_SCR = 0;
+
+ SSI1_SFCSR = SSI_SFCSR_RFWM1(RXFIFO_WATERMARK) |
+ SSI_SFCSR_RFWM0(RXFIFO_WATERMARK) |
+ SSI_SFCSR_TFWM1(TXFIFO_WATERMARK) |
+ SSI_SFCSR_TFWM0(TXFIFO_WATERMARK);
+ } else {
+
+ if (!ssi_clk1)
+ return -EINVAL;
+
+ if (ssi_active[SSI2_PORT]++) {
+ pr_debug("%s: exit before reset\n", __func__);
+ return 0;
+ }
+
+ /* SSI2 Reset */
+ SSI2_SCR = 0;
+
+ SSI2_SFCSR = SSI_SFCSR_RFWM1(RXFIFO_WATERMARK) |
+ SSI_SFCSR_RFWM0(RXFIFO_WATERMARK) |
+ SSI_SFCSR_TFWM1(TXFIFO_WATERMARK) |
+ SSI_SFCSR_TFWM0(TXFIFO_WATERMARK);
+ }
+
+ return 0;
+}
+
+int imx_ssi_hw_tx_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ u32 stccr, stcr, sier;
+
+ pr_debug("%s\n", __func__);
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ stccr = SSI1_STCCR & ~SSI_STCCR_WL_MASK;
+ stcr = SSI1_STCR;
+ sier = SSI1_SIER;
+ } else {
+ stccr = SSI2_STCCR & ~SSI_STCCR_WL_MASK;
+ stcr = SSI2_STCR;
+ sier = SSI2_SIER;
+ }
+
+ /* DAI data (word) size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ stccr |= SSI_STCCR_WL(16);
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ stccr |= SSI_STCCR_WL(20);
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ stccr |= SSI_STCCR_WL(24);
+ break;
+ }
+
+ /* enable interrupts */
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+ stcr |= SSI_STCR_TFEN0;
+ else
+ stcr |= SSI_STCR_TFEN1;
+ sier |= SSI_SIER_TDMAE;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ SSI1_STCR = stcr;
+ SSI1_STCCR = stccr;
+ SSI1_SIER = sier;
+ } else {
+ SSI2_STCR = stcr;
+ SSI2_STCCR = stccr;
+ SSI2_SIER = sier;
+ }
+
+ return 0;
+}
+
+int imx_ssi_hw_rx_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ u32 srccr, srcr, sier;
+
+ pr_debug("%s\n", __func__);
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ srccr = SSI1_SRCCR & ~SSI_SRCCR_WL_MASK;
+ srcr = SSI1_SRCR;
+ sier = SSI1_SIER;
+ } else {
+ srccr = SSI2_SRCCR & ~SSI_SRCCR_WL_MASK;
+ srcr = SSI2_SRCR;
+ sier = SSI2_SIER;
+ }
+
+ /* DAI data (word) size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ srccr |= SSI_SRCCR_WL(16);
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ srccr |= SSI_SRCCR_WL(20);
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ srccr |= SSI_SRCCR_WL(24);
+ break;
+ }
+
+ /* enable interrupts */
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+ srcr |= SSI_SRCR_RFEN0;
+ else
+ srcr |= SSI_SRCR_RFEN1;
+ sier |= SSI_SIER_RDMAE;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ SSI1_SRCR = srcr;
+ SSI1_SRCCR = srccr;
+ SSI1_SIER = sier;
+ } else {
+ SSI2_SRCR = srcr;
+ SSI2_SRCCR = srccr;
+ SSI2_SIER = sier;
+ }
+
+ return 0;
+}
+
+/*
+ * Should only be called when port is inactive (i.e. SSIEN = 0),
+ * although can be called multiple times by upper layers.
+ */
+int imx_ssi_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ int ret;
+
+ /* cant change any parameters when SSI is running */
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ if (SSI1_SCR & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+ } else {
+ if (SSI2_SCR & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+ }
+
+ /*
+ * Configure both tx and rx params with the same settings. This is
+ * really a harware restriction because SSI must be disabled until
+ * we can change those values. If there is an active audio stream in
+ * one direction, enabling the other direction with different
+ * settings would mean disturbing the running one.
+ */
+ ret = imx_ssi_hw_tx_params(substream, params);
+ if (ret < 0)
+ return ret;
+ return imx_ssi_hw_rx_params(substream, params);
+}
+
+int imx_ssi_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ pr_debug("%s\n", __func__);
+
+ /* Enable clks here to follow SSI recommended init sequence */
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ ret = clk_enable(ssi_clk0);
+ if (ret < 0)
+ printk(KERN_ERR "Unable to enable ssi_clk0\n");
+ } else {
+ ret = clk_enable(ssi_clk1);
+ if (ret < 0)
+ printk(KERN_ERR "Unable to enable ssi_clk1\n");
+ }
+
+ return 0;
+}
+
+static int imx_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ u32 scr;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+ scr = SSI1_SCR;
+ else
+ scr = SSI2_SCR;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ scr |= SSI_SCR_TE | SSI_SCR_SSIEN;
+ else
+ scr |= SSI_SCR_RE | SSI_SCR_SSIEN;
+ break;
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ scr &= ~SSI_SCR_TE;
+ else
+ scr &= ~SSI_SCR_RE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+ SSI1_SCR = scr;
+ else
+ SSI2_SCR = scr;
+
+ return 0;
+}
+
+static void imx_ssi_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ /* shutdown SSI if neither Tx or Rx is active */
+ if (!cpu_dai->active) {
+
+ if (cpu_dai->id == IMX_DAI_SSI0 ||
+ cpu_dai->id == IMX_DAI_SSI2) {
+
+ if (--ssi_active[SSI1_PORT] > 1)
+ return;
+
+ SSI1_SCR = 0;
+ clk_disable(ssi_clk0);
+ } else {
+ if (--ssi_active[SSI2_PORT])
+ return;
+ SSI2_SCR = 0;
+ clk_disable(ssi_clk1);
+ }
+ }
+}
+
+#ifdef CONFIG_PM
+static int imx_ssi_suspend(struct platform_device *dev,
+ struct snd_soc_dai *dai)
+{
+ return 0;
+}
+
+static int imx_ssi_resume(struct platform_device *pdev,
+ struct snd_soc_dai *dai)
+{
+ return 0;
+}
+
+#else
+#define imx_ssi_suspend NULL
+#define imx_ssi_resume NULL
+#endif
+
+#define IMX_SSI_RATES \
+ (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | \
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
+ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | \
+ SNDRV_PCM_RATE_96000)
+
+#define IMX_SSI_BITS \
+ (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+ SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops imx_ssi_pcm_dai_ops = {
+ .startup = imx_ssi_startup,
+ .shutdown = imx_ssi_shutdown,
+ .trigger = imx_ssi_trigger,
+ .prepare = imx_ssi_prepare,
+ .hw_params = imx_ssi_hw_params,
+ .set_sysclk = imx_ssi_set_dai_sysclk,
+ .set_clkdiv = imx_ssi_set_dai_clkdiv,
+ .set_fmt = imx_ssi_set_dai_fmt,
+ .set_tdm_slot = imx_ssi_set_dai_tdm_slot,
+};
+
+struct snd_soc_dai imx_ssi_pcm_dai[] = {
+{
+ .name = "imx-i2s-1-0",
+ .id = IMX_DAI_SSI0,
+ .suspend = imx_ssi_suspend,
+ .resume = imx_ssi_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .ops = &imx_ssi_pcm_dai_ops,
+},
+{
+ .name = "imx-i2s-2-0",
+ .id = IMX_DAI_SSI1,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .ops = &imx_ssi_pcm_dai_ops,
+},
+{
+ .name = "imx-i2s-1-1",
+ .id = IMX_DAI_SSI2,
+ .suspend = imx_ssi_suspend,
+ .resume = imx_ssi_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .ops = &imx_ssi_pcm_dai_ops,
+},
+{
+ .name = "imx-i2s-2-1",
+ .id = IMX_DAI_SSI3,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .ops = &imx_ssi_pcm_dai_ops,
+},
+};
+EXPORT_SYMBOL_GPL(imx_ssi_pcm_dai);
+
+static int __init imx_ssi_init(void)
+{
+ return snd_soc_register_dais(imx_ssi_pcm_dai,
+ ARRAY_SIZE(imx_ssi_pcm_dai));
+}
+
+static void __exit imx_ssi_exit(void)
+{
+ snd_soc_unregister_dais(imx_ssi_pcm_dai,
+ ARRAY_SIZE(imx_ssi_pcm_dai));
+}
+
+module_init(imx_ssi_init);
+module_exit(imx_ssi_exit);
+MODULE_AUTHOR("Liam Girdwood, liam.girdwood@wolfsonmicro.com");
+MODULE_DESCRIPTION("i.MX ASoC I2S driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IMX_SSI_H
+#define _IMX_SSI_H
+
+#include <mach/hardware.h>
+
+/* SSI regs definition - MOVE to /arch/arm/plat-mxc/include/mach/ when stable */
+#define SSI1_IO_BASE_ADDR IO_ADDRESS(SSI1_BASE_ADDR)
+#define SSI2_IO_BASE_ADDR IO_ADDRESS(SSI2_BASE_ADDR)
+
+#define STX0 0x00
+#define STX1 0x04
+#define SRX0 0x08
+#define SRX1 0x0c
+#define SCR 0x10
+#define SISR 0x14
+#define SIER 0x18
+#define STCR 0x1c
+#define SRCR 0x20
+#define STCCR 0x24
+#define SRCCR 0x28
+#define SFCSR 0x2c
+#define STR 0x30
+#define SOR 0x34
+#define SACNT 0x38
+#define SACADD 0x3c
+#define SACDAT 0x40
+#define SATAG 0x44
+#define STMSK 0x48
+#define SRMSK 0x4c
+
+#define SSI1_STX0 (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STX0)))
+#define SSI1_STX1 (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STX1)))
+#define SSI1_SRX0 (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRX0)))
+#define SSI1_SRX1 (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRX1)))
+#define SSI1_SCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SCR)))
+#define SSI1_SISR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SISR)))
+#define SSI1_SIER (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SIER)))
+#define SSI1_STCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STCR)))
+#define SSI1_SRCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRCR)))
+#define SSI1_STCCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STCCR)))
+#define SSI1_SRCCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRCCR)))
+#define SSI1_SFCSR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SFCSR)))
+#define SSI1_STR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STR)))
+#define SSI1_SOR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SOR)))
+#define SSI1_SACNT (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SACNT)))
+#define SSI1_SACADD (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SACADD)))
+#define SSI1_SACDAT (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SACDAT)))
+#define SSI1_SATAG (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SATAG)))
+#define SSI1_STMSK (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STMSK)))
+#define SSI1_SRMSK (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRMSK)))
+
+
+#define SSI2_STX0 (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STX0)))
+#define SSI2_STX1 (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STX1)))
+#define SSI2_SRX0 (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRX0)))
+#define SSI2_SRX1 (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRX1)))
+#define SSI2_SCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SCR)))
+#define SSI2_SISR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SISR)))
+#define SSI2_SIER (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SIER)))
+#define SSI2_STCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STCR)))
+#define SSI2_SRCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRCR)))
+#define SSI2_STCCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STCCR)))
+#define SSI2_SRCCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRCCR)))
+#define SSI2_SFCSR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SFCSR)))
+#define SSI2_STR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STR)))
+#define SSI2_SOR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SOR)))
+#define SSI2_SACNT (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SACNT)))
+#define SSI2_SACADD (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SACADD)))
+#define SSI2_SACDAT (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SACDAT)))
+#define SSI2_SATAG (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SATAG)))
+#define SSI2_STMSK (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STMSK)))
+#define SSI2_SRMSK (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRMSK)))
+
+#define SSI_SCR_CLK_IST (1 << 9)
+#define SSI_SCR_TCH_EN (1 << 8)
+#define SSI_SCR_SYS_CLK_EN (1 << 7)
+#define SSI_SCR_I2S_MODE_NORM (0 << 5)
+#define SSI_SCR_I2S_MODE_MSTR (1 << 5)
+#define SSI_SCR_I2S_MODE_SLAVE (2 << 5)
+#define SSI_SCR_SYN (1 << 4)
+#define SSI_SCR_NET (1 << 3)
+#define SSI_SCR_RE (1 << 2)
+#define SSI_SCR_TE (1 << 1)
+#define SSI_SCR_SSIEN (1 << 0)
+
+#define SSI_SISR_CMDAU (1 << 18)
+#define SSI_SISR_CMDDU (1 << 17)
+#define SSI_SISR_RXT (1 << 16)
+#define SSI_SISR_RDR1 (1 << 15)
+#define SSI_SISR_RDR0 (1 << 14)
+#define SSI_SISR_TDE1 (1 << 13)
+#define SSI_SISR_TDE0 (1 << 12)
+#define SSI_SISR_ROE1 (1 << 11)
+#define SSI_SISR_ROE0 (1 << 10)
+#define SSI_SISR_TUE1 (1 << 9)
+#define SSI_SISR_TUE0 (1 << 8)
+#define SSI_SISR_TFS (1 << 7)
+#define SSI_SISR_RFS (1 << 6)
+#define SSI_SISR_TLS (1 << 5)
+#define SSI_SISR_RLS (1 << 4)
+#define SSI_SISR_RFF1 (1 << 3)
+#define SSI_SISR_RFF0 (1 << 2)
+#define SSI_SISR_TFE1 (1 << 1)
+#define SSI_SISR_TFE0 (1 << 0)
+
+#define SSI_SIER_RDMAE (1 << 22)
+#define SSI_SIER_RIE (1 << 21)
+#define SSI_SIER_TDMAE (1 << 20)
+#define SSI_SIER_TIE (1 << 19)
+#define SSI_SIER_CMDAU_EN (1 << 18)
+#define SSI_SIER_CMDDU_EN (1 << 17)
+#define SSI_SIER_RXT_EN (1 << 16)
+#define SSI_SIER_RDR1_EN (1 << 15)
+#define SSI_SIER_RDR0_EN (1 << 14)
+#define SSI_SIER_TDE1_EN (1 << 13)
+#define SSI_SIER_TDE0_EN (1 << 12)
+#define SSI_SIER_ROE1_EN (1 << 11)
+#define SSI_SIER_ROE0_EN (1 << 10)
+#define SSI_SIER_TUE1_EN (1 << 9)
+#define SSI_SIER_TUE0_EN (1 << 8)
+#define SSI_SIER_TFS_EN (1 << 7)
+#define SSI_SIER_RFS_EN (1 << 6)
+#define SSI_SIER_TLS_EN (1 << 5)
+#define SSI_SIER_RLS_EN (1 << 4)
+#define SSI_SIER_RFF1_EN (1 << 3)
+#define SSI_SIER_RFF0_EN (1 << 2)
+#define SSI_SIER_TFE1_EN (1 << 1)
+#define SSI_SIER_TFE0_EN (1 << 0)
+
+#define SSI_STCR_TXBIT0 (1 << 9)
+#define SSI_STCR_TFEN1 (1 << 8)
+#define SSI_STCR_TFEN0 (1 << 7)
+#define SSI_STCR_TFDIR (1 << 6)
+#define SSI_STCR_TXDIR (1 << 5)
+#define SSI_STCR_TSHFD (1 << 4)
+#define SSI_STCR_TSCKP (1 << 3)
+#define SSI_STCR_TFSI (1 << 2)
+#define SSI_STCR_TFSL (1 << 1)
+#define SSI_STCR_TEFS (1 << 0)
+
+#define SSI_SRCR_RXBIT0 (1 << 9)
+#define SSI_SRCR_RFEN1 (1 << 8)
+#define SSI_SRCR_RFEN0 (1 << 7)
+#define SSI_SRCR_RFDIR (1 << 6)
+#define SSI_SRCR_RXDIR (1 << 5)
+#define SSI_SRCR_RSHFD (1 << 4)
+#define SSI_SRCR_RSCKP (1 << 3)
+#define SSI_SRCR_RFSI (1 << 2)
+#define SSI_SRCR_RFSL (1 << 1)
+#define SSI_SRCR_REFS (1 << 0)
+
+#define SSI_STCCR_DIV2 (1 << 18)
+#define SSI_STCCR_PSR (1 << 15)
+#define SSI_STCCR_WL(x) ((((x) - 2) >> 1) << 13)
+#define SSI_STCCR_DC(x) (((x) & 0x1f) << 8)
+#define SSI_STCCR_PM(x) (((x) & 0xff) << 0)
+#define SSI_STCCR_WL_MASK (0xf << 13)
+#define SSI_STCCR_DC_MASK (0x1f << 8)
+#define SSI_STCCR_PM_MASK (0xff << 0)
+
+#define SSI_SRCCR_DIV2 (1 << 18)
+#define SSI_SRCCR_PSR (1 << 15)
+#define SSI_SRCCR_WL(x) ((((x) - 2) >> 1) << 13)
+#define SSI_SRCCR_DC(x) (((x) & 0x1f) << 8)
+#define SSI_SRCCR_PM(x) (((x) & 0xff) << 0)
+#define SSI_SRCCR_WL_MASK (0xf << 13)
+#define SSI_SRCCR_DC_MASK (0x1f << 8)
+#define SSI_SRCCR_PM_MASK (0xff << 0)
+
+
+#define SSI_SFCSR_RFCNT1(x) (((x) & 0xf) << 28)
+#define SSI_SFCSR_TFCNT1(x) (((x) & 0xf) << 24)
+#define SSI_SFCSR_RFWM1(x) (((x) & 0xf) << 20)
+#define SSI_SFCSR_TFWM1(x) (((x) & 0xf) << 16)
+#define SSI_SFCSR_RFCNT0(x) (((x) & 0xf) << 12)
+#define SSI_SFCSR_TFCNT0(x) (((x) & 0xf) << 8)
+#define SSI_SFCSR_RFWM0(x) (((x) & 0xf) << 4)
+#define SSI_SFCSR_TFWM0(x) (((x) & 0xf) << 0)
+
+#define SSI_STR_TEST (1 << 15)
+#define SSI_STR_RCK2TCK (1 << 14)
+#define SSI_STR_RFS2TFS (1 << 13)
+#define SSI_STR_RXSTATE(x) (((x) & 0xf) << 8)
+#define SSI_STR_TXD2RXD (1 << 7)
+#define SSI_STR_TCK2RCK (1 << 6)
+#define SSI_STR_TFS2RFS (1 << 5)
+#define SSI_STR_TXSTATE(x) (((x) & 0xf) << 0)
+
+#define SSI_SOR_CLKOFF (1 << 6)
+#define SSI_SOR_RX_CLR (1 << 5)
+#define SSI_SOR_TX_CLR (1 << 4)
+#define SSI_SOR_INIT (1 << 3)
+#define SSI_SOR_WAIT(x) (((x) & 0x3) << 1)
+#define SSI_SOR_SYNRST (1 << 0)
+
+#define SSI_SACNT_FRDIV(x) (((x) & 0x3f) << 5)
+#define SSI_SACNT_WR (x << 4)
+#define SSI_SACNT_RD (x << 3)
+#define SSI_SACNT_TIF (x << 2)
+#define SSI_SACNT_FV (x << 1)
+#define SSI_SACNT_AC97EN (x << 0)
+
+/* Watermarks for FIFO's */
+#define TXFIFO_WATERMARK 0x4
+#define RXFIFO_WATERMARK 0x4
+
+/* i.MX DAI SSP ID's */
+#define IMX_DAI_SSI0 0 /* SSI1 FIFO 0 */
+#define IMX_DAI_SSI1 1 /* SSI1 FIFO 1 */
+#define IMX_DAI_SSI2 2 /* SSI2 FIFO 0 */
+#define IMX_DAI_SSI3 3 /* SSI2 FIFO 1 */
+
+/* SSI clock sources */
+#define IMX_SSP_SYS_CLK 0
+
+/* SSI audio dividers */
+#define IMX_SSI_TX_DIV_2 0
+#define IMX_SSI_TX_DIV_PSR 1
+#define IMX_SSI_TX_DIV_PM 2
+#define IMX_SSI_RX_DIV_2 3
+#define IMX_SSI_RX_DIV_PSR 4
+#define IMX_SSI_RX_DIV_PM 5
+
+
+/* SSI Div 2 */
+#define IMX_SSI_DIV_2_OFF (~SSI_STCCR_DIV2)
+#define IMX_SSI_DIV_2_ON SSI_STCCR_DIV2
+
+extern struct snd_soc_dai imx_ssi_pcm_dai[4];
+extern int get_ssi_clk(int ssi, struct device *dev);
+extern void put_ssi_clk(int ssi);
+#endif
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff