#include "fuse.h"
#include "iomap.h"
+#define DPD_SAMPLE 0x020
+#define DPD_SAMPLE_ENABLE (1 << 0)
+#define DPD_SAMPLE_DISABLE (0 << 0)
+
#define PWRGATE_TOGGLE 0x30
#define PWRGATE_TOGGLE_START (1 << 8)
#define PWRGATE_STATUS 0x38
+#define IO_DPD_REQ 0x1b8
+#define IO_DPD_REQ_CODE_IDLE (0 << 30)
+#define IO_DPD_REQ_CODE_OFF (1 << 30)
+#define IO_DPD_REQ_CODE_ON (2 << 30)
+#define IO_DPD_REQ_CODE_MASK (3 << 30)
+
+#define IO_DPD_STATUS 0x1bc
+#define IO_DPD2_REQ 0x1c0
+#define IO_DPD2_STATUS 0x1c4
+#define SEL_DPD_TIM 0x1c8
+
#define GPU_RG_CNTRL 0x2d4
static int tegra_num_powerdomains;
}
#endif
+
+static int tegra_io_rail_prepare(int id, unsigned long *request,
+ unsigned long *status, unsigned int *bit)
+{
+ unsigned long rate, value;
+ struct clk *clk;
+
+ *bit = id % 32;
+
+ /*
+ * There are two sets of 30 bits to select IO rails, but bits 30 and
+ * 31 are control bits rather than IO rail selection bits.
+ */
+ if (id > 63 || *bit == 30 || *bit == 31)
+ return -EINVAL;
+
+ if (id < 32) {
+ *status = IO_DPD_STATUS;
+ *request = IO_DPD_REQ;
+ } else {
+ *status = IO_DPD2_STATUS;
+ *request = IO_DPD2_REQ;
+ }
+
+ clk = clk_get_sys(NULL, "pclk");
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ rate = clk_get_rate(clk);
+ clk_put(clk);
+
+ pmc_write(DPD_SAMPLE_ENABLE, DPD_SAMPLE);
+
+ /* must be at least 200 ns, in APB (PCLK) clock cycles */
+ value = DIV_ROUND_UP(1000000000, rate);
+ value = DIV_ROUND_UP(200, value);
+ pmc_write(value, SEL_DPD_TIM);
+
+ return 0;
+}
+
+static int tegra_io_rail_poll(unsigned long offset, unsigned long mask,
+ unsigned long val, unsigned long timeout)
+{
+ unsigned long value;
+
+ timeout = jiffies + msecs_to_jiffies(timeout);
+
+ while (time_after(timeout, jiffies)) {
+ value = pmc_read(offset);
+ if ((value & mask) == val)
+ return 0;
+
+ usleep_range(250, 1000);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static void tegra_io_rail_unprepare(void)
+{
+ pmc_write(DPD_SAMPLE_DISABLE, DPD_SAMPLE);
+}
+
+int tegra_io_rail_power_on(int id)
+{
+ unsigned long request, status, value;
+ unsigned int bit, mask;
+ int err;
+
+ err = tegra_io_rail_prepare(id, &request, &status, &bit);
+ if (err < 0)
+ return err;
+
+ mask = 1 << bit;
+
+ value = pmc_read(request);
+ value |= mask;
+ value &= ~IO_DPD_REQ_CODE_MASK;
+ value |= IO_DPD_REQ_CODE_OFF;
+ pmc_write(value, request);
+
+ err = tegra_io_rail_poll(status, mask, 0, 250);
+ if (err < 0)
+ return err;
+
+ tegra_io_rail_unprepare();
+
+ return 0;
+}
+
+int tegra_io_rail_power_off(int id)
+{
+ unsigned long request, status, value;
+ unsigned int bit, mask;
+ int err;
+
+ err = tegra_io_rail_prepare(id, &request, &status, &bit);
+ if (err < 0)
+ return err;
+
+ mask = 1 << bit;
+
+ value = pmc_read(request);
+ value |= mask;
+ value &= ~IO_DPD_REQ_CODE_MASK;
+ value |= IO_DPD_REQ_CODE_ON;
+ pmc_write(value, request);
+
+ err = tegra_io_rail_poll(status, mask, mask, 250);
+ if (err < 0)
+ return err;
+
+ tegra_io_rail_unprepare();
+
+ return 0;
+}
#define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D
+#define TEGRA_IO_RAIL_CSIA 0
+#define TEGRA_IO_RAIL_CSIB 1
+#define TEGRA_IO_RAIL_DSI 2
+#define TEGRA_IO_RAIL_MIPI_BIAS 3
+#define TEGRA_IO_RAIL_PEX_BIAS 4
+#define TEGRA_IO_RAIL_PEX_CLK1 5
+#define TEGRA_IO_RAIL_PEX_CLK2 6
+#define TEGRA_IO_RAIL_USB0 9
+#define TEGRA_IO_RAIL_USB1 10
+#define TEGRA_IO_RAIL_USB2 11
+#define TEGRA_IO_RAIL_USB_BIAS 12
+#define TEGRA_IO_RAIL_NAND 13
+#define TEGRA_IO_RAIL_UART 14
+#define TEGRA_IO_RAIL_BB 15
+#define TEGRA_IO_RAIL_AUDIO 17
+#define TEGRA_IO_RAIL_HSIC 19
+#define TEGRA_IO_RAIL_COMP 22
+#define TEGRA_IO_RAIL_HDMI 28
+#define TEGRA_IO_RAIL_PEX_CNTRL 32
+#define TEGRA_IO_RAIL_SDMMC1 33
+#define TEGRA_IO_RAIL_SDMMC3 34
+#define TEGRA_IO_RAIL_SDMMC4 35
+#define TEGRA_IO_RAIL_CAM 36
+#define TEGRA_IO_RAIL_RES 37
+#define TEGRA_IO_RAIL_HV 38
+#define TEGRA_IO_RAIL_DSIB 39
+#define TEGRA_IO_RAIL_DSIC 40
+#define TEGRA_IO_RAIL_DSID 41
+#define TEGRA_IO_RAIL_CSIE 44
+#define TEGRA_IO_RAIL_LVDS 57
+#define TEGRA_IO_RAIL_SYS_DDC 58
+
#ifdef CONFIG_ARCH_TEGRA
int tegra_powergate_is_powered(int id);
int tegra_powergate_power_on(int id);
/* Must be called with clk disabled, and returns with clk enabled */
int tegra_powergate_sequence_power_up(int id, struct clk *clk,
struct reset_control *rst);
+
+int tegra_io_rail_power_on(int id);
+int tegra_io_rail_power_off(int id);
#else
static inline int tegra_powergate_is_powered(int id)
{
{
return -ENOSYS;
}
+
+static inline int tegra_io_rail_power_on(int id)
+{
+ return -ENOSYS;
+}
+
+static inline int tegra_io_rail_power_off(int id)
+{
+ return -ENOSYS;
+}
#endif
#endif /* _MACH_TEGRA_POWERGATE_H_ */