[media] rc-core: rename dev->scanmask to dev->scancode_mask

We already have dev->scancode_filter and dev->scancode_wakeup_filter
so rename dev->scanmask to dev->scancode_mask for consistency.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

diff --git a/drivers/media/pci/cx88/cx88-input.c b/drivers/media/pci/cx88/cx88-input.c
index 93ff6a7f23543c8697def1140f0af93db60a387c..3f1342c98b46c09e6a3a4a713c9696de4290d34a 100644 (file)
--- a/drivers/media/pci/cx88/cx88-input.c
+++ b/drivers/media/pci/cx88/cx88-input.c
@@ -478,7 +478,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
        dev->priv = core;
        dev->open = cx88_ir_open;
        dev->close = cx88_ir_close;
-       dev->scanmask = hardware_mask;
+       dev->scancode_mask = hardware_mask;
 
        if (ir->sampling) {
                dev->driver_type = RC_DRIVER_IR_RAW;

diff --git a/drivers/media/pci/ttpci/budget-ci.c b/drivers/media/pci/ttpci/budget-ci.c
index 41ce7dec60e62c2c89941e52c2acec7fdf2332c1..1feeeff3681b18da4a29d2d2469fe5fdb3a5b2e1 100644 (file)
--- a/drivers/media/pci/ttpci/budget-ci.c
+++ b/drivers/media/pci/ttpci/budget-ci.c
@@ -234,7 +234,7 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
                break;
        }
        if (!budget_ci->ir.full_rc5)
-               dev->scanmask = 0xff;
+               dev->scancode_mask = 0xff;
 
        error = rc_register_device(dev);
        if (error) {

diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index c3fb8f8f192bb2e05c4e82cf5f474b77b57f50fa..39e4b5ffe14195c7e2127a45b21585998dc79995 100644 (file)
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -285,8 +285,8 @@ static unsigned int ir_establish_scancode(struct rc_dev *dev,
         * IR tables from other remotes. So, we support specifying a mask to
         * indicate the valid bits of the scancodes.
         */
-       if (dev->scanmask)
-               scancode &= dev->scanmask;
+       if (dev->scancode_mask)
+               scancode &= dev->scancode_mask;
 
        /* First check if we already have a mapping for this ir command */
        for (i = 0; i < rc_map->len; i++) {

diff --git a/drivers/media/usb/cx231xx/cx231xx-input.c b/drivers/media/usb/cx231xx/cx231xx-input.c
index adcdd92179b268c0e58a8e846e6c8da2f1964a64..05f0434919d4d228899d2a159215e584cb706611 100644 (file)
--- a/drivers/media/usb/cx231xx/cx231xx-input.c
+++ b/drivers/media/usb/cx231xx/cx231xx-input.c
@@ -91,7 +91,7 @@ int cx231xx_ir_init(struct cx231xx *dev)
        dev->init_data.get_key = get_key_isdbt;
        dev->init_data.ir_codes = cx231xx_boards[dev->model].rc_map_name;
        /* The i2c micro-controller only outputs the cmd part of NEC protocol */
-       dev->init_data.rc_dev->scanmask = 0xff;
+       dev->init_data.rc_dev->scancode_mask = 0xff;
        dev->init_data.rc_dev->driver_name = "cx231xx";
        dev->init_data.type = RC_BIT_NEC;
        info.addr = 0x30;

diff --git a/drivers/media/usb/tm6000/tm6000-input.c b/drivers/media/usb/tm6000/tm6000-input.c
index 8a519f51609a4a9463abcf02305fe47bdcbe09aa..26b2ebb62547d24de91e60452491fc582f476325 100644 (file)
--- a/drivers/media/usb/tm6000/tm6000-input.c
+++ b/drivers/media/usb/tm6000/tm6000-input.c
@@ -443,7 +443,7 @@ int tm6000_ir_init(struct tm6000_core *dev)
        /* input setup */
        rc->allowed_protocols = RC_BIT_RC5 | RC_BIT_NEC;
        /* Neded, in order to support NEC remotes with 24 or 32 bits */
-       rc->scanmask = 0xffff;
+       rc->scancode_mask = 0xffff;
        rc->priv = ir;
        rc->change_protocol = tm6000_ir_change_protocol;
        if (dev->int_in.endp) {

diff --git a/include/media/rc-core.h b/include/media/rc-core.h
index 4f9e187d05bf9866c6d1ddb29e6b1318f8f157f9..3047837db1cce87cb78d8a11e75c41ecb0abea73 100644 (file)
--- a/include/media/rc-core.h
+++ b/include/media/rc-core.h
@@ -80,11 +80,12 @@ enum rc_filter_type {
  * @enabled_wakeup_protocols: bitmask with the enabled RC_BIT_* wakeup protocols
  * @scancode_filter: scancode filter
  * @scancode_wakeup_filter: scancode wakeup filters
- * @scanmask: some hardware decoders are not capable of providing the full
+ * @scancode_mask: some hardware decoders are not capable of providing the full
  *     scancode to the application. As this is a hardware limit, we can't do
  *     anything with it. Yet, as the same keycode table can be used with other
  *     devices, a mask is provided to allow its usage. Drivers should generally
  *     leave this field in blank
+ * @users: number of current users of the device
  * @priv: driver-specific data
  * @keylock: protects the remaining members of the struct
  * @keypressed: whether a key is currently pressed
@@ -139,8 +140,8 @@ struct rc_dev {
        u64                             enabled_wakeup_protocols;
        struct rc_scancode_filter       scancode_filter;
        struct rc_scancode_filter       scancode_wakeup_filter;
+       u32                             scancode_mask;
        u32                             users;
-       u32                             scanmask;
        void                            *priv;
        spinlock_t                      keylock;
        bool                            keypressed;