fbdev: bfin-lq035q1-fb: new Blackfin Landscape LCD EZ-Extender driver
authorMichael Hennerich <michael.hennerich@analog.com>
Wed, 16 Dec 2009 00:46:21 +0000 (16:46 -0800)
committerLinus Torvalds <torvalds@linux-foundation.org>
Wed, 16 Dec 2009 15:20:01 +0000 (07:20 -0800)
Framebuffer driver for the Landscape LCD EZ-Extender (ADZS-BFLLCD-EZEXT)
http://docs.blackfin.uclinux.org/doku.php?id=hw:cards:landscape_lcd_ez-extender

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/blackfin/include/asm/bfin-lq035q1.h [new file with mode: 0644]
drivers/video/Kconfig
drivers/video/Makefile
drivers/video/bfin-lq035q1-fb.c [new file with mode: 0644]

diff --git a/arch/blackfin/include/asm/bfin-lq035q1.h b/arch/blackfin/include/asm/bfin-lq035q1.h
new file mode 100644 (file)
index 0000000..57bc21a
--- /dev/null
@@ -0,0 +1,28 @@
+/*
+ * Blackfin LCD Framebuffer driver SHARP LQ035Q1DH02
+ *
+ * Copyright 2008-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef BFIN_LQ035Q1_H
+#define BFIN_LQ035Q1_H
+
+#define LQ035_RL       (0 << 8)        /* Right -> Left Scan */
+#define LQ035_LR       (1 << 8)        /* Left -> Right Scan */
+#define LQ035_TB       (1 << 9)        /* Top -> Botton Scan */
+#define LQ035_BT       (0 << 9)        /* Botton -> Top Scan */
+#define LQ035_BGR      (1 << 11)       /* Use BGR format */
+#define LQ035_RGB      (0 << 11)       /* Use RGB format */
+#define LQ035_NORM     (1 << 13)       /* Reversal */
+#define LQ035_REV      (0 << 13)       /* Reversal */
+
+struct bfin_lq035q1fb_disp_info {
+
+       unsigned        mode;
+       /* GPIOs */
+       int             use_bl;
+       unsigned        gpio_bl;
+};
+
+#endif /* BFIN_LQ035Q1_H */
index 99c0df1c7ebf5ec9f4fed97d7bfdd2de241b488b..5a5c303a6373501a4de9fcd8a0ad475bc081f539 100644 (file)
@@ -614,6 +614,21 @@ config FB_BFIN_T350MCQB
         This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
         It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
 
+config FB_BFIN_LQ035Q1
+       tristate "SHARP LQ035Q1DH02 TFT LCD"
+       depends on FB && BLACKFIN && SPI
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       select BFIN_GPTIMERS
+       help
+         This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
+         the Blackfin Landscape LCD EZ-Extender Card.
+         This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
+         It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
+
+         To compile this driver as a module, choose M here: the
+         module will be called bfin-lq035q1-fb.
 
 config FB_STI
        tristate "HP STI frame buffer device support"
index 0f8da331ba0f7d76a80eb98216d95f4aa9ea6284..4ecb30c4f3f25fa83be323f6206cb12e48ec525b 100644 (file)
@@ -137,6 +137,7 @@ obj-$(CONFIG_FB_EFI)              += efifb.o
 obj-$(CONFIG_FB_VGA16)            += vga16fb.o
 obj-$(CONFIG_FB_OF)               += offb.o
 obj-$(CONFIG_FB_BF54X_LQ043)     += bf54x-lq043fb.o
+obj-$(CONFIG_FB_BFIN_LQ035Q1)     += bfin-lq035q1-fb.o
 obj-$(CONFIG_FB_BFIN_T350MCQB)   += bfin-t350mcqb-fb.o
 obj-$(CONFIG_FB_MX3)             += mx3fb.o
 obj-$(CONFIG_FB_DA8XX)           += da8xx-fb.o
diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/bfin-lq035q1-fb.c
new file mode 100644 (file)
index 0000000..b690c26
--- /dev/null
@@ -0,0 +1,826 @@
+/*
+ * Blackfin LCD Framebuffer driver SHARP LQ035Q1DH02
+ *
+ * Copyright 2008-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#define DRIVER_NAME "bfin-lq035q1"
+#define pr_fmt(fmt) DRIVER_NAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/backlight.h>
+#include <linux/lcd.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+#include <asm/gptimers.h>
+
+#include <asm/bfin-lq035q1.h>
+
+#if defined(BF533_FAMILY) || defined(BF538_FAMILY)
+#define TIMER_HSYNC_id                 TIMER1_id
+#define TIMER_HSYNCbit                 TIMER1bit
+#define TIMER_HSYNC_STATUS_TRUN                TIMER_STATUS_TRUN1
+#define TIMER_HSYNC_STATUS_TIMIL       TIMER_STATUS_TIMIL1
+#define TIMER_HSYNC_STATUS_TOVF                TIMER_STATUS_TOVF1
+
+#define TIMER_VSYNC_id                 TIMER2_id
+#define TIMER_VSYNCbit                 TIMER2bit
+#define TIMER_VSYNC_STATUS_TRUN                TIMER_STATUS_TRUN2
+#define TIMER_VSYNC_STATUS_TIMIL       TIMER_STATUS_TIMIL2
+#define TIMER_VSYNC_STATUS_TOVF                TIMER_STATUS_TOVF2
+#else
+#define TIMER_HSYNC_id                 TIMER0_id
+#define TIMER_HSYNCbit                 TIMER0bit
+#define TIMER_HSYNC_STATUS_TRUN                TIMER_STATUS_TRUN0
+#define TIMER_HSYNC_STATUS_TIMIL       TIMER_STATUS_TIMIL0
+#define TIMER_HSYNC_STATUS_TOVF                TIMER_STATUS_TOVF0
+
+#define TIMER_VSYNC_id                 TIMER1_id
+#define TIMER_VSYNCbit                 TIMER1bit
+#define TIMER_VSYNC_STATUS_TRUN                TIMER_STATUS_TRUN1
+#define TIMER_VSYNC_STATUS_TIMIL       TIMER_STATUS_TIMIL1
+#define TIMER_VSYNC_STATUS_TOVF                TIMER_STATUS_TOVF1
+#endif
+
+#define LCD_X_RES              320     /* Horizontal Resolution */
+#define LCD_Y_RES              240     /* Vertical Resolution */
+#define        DMA_BUS_SIZE            16
+
+#define USE_RGB565_16_BIT_PPI
+
+#ifdef USE_RGB565_16_BIT_PPI
+#define LCD_BPP                16      /* Bit Per Pixel */
+#define CLOCKS_PER_PIX 1
+#define CPLD_PIPELINE_DELAY_COR 0      /* NO CPLB */
+#endif
+
+/* Interface 16/18-bit TFT over an 8-bit wide PPI using a small Programmable Logic Device (CPLD)
+ * http://blackfin.uclinux.org/gf/project/stamp/frs/?action=FrsReleaseBrowse&frs_package_id=165
+ */
+
+#ifdef USE_RGB565_8_BIT_PPI
+#define LCD_BPP                16      /* Bit Per Pixel */
+#define CLOCKS_PER_PIX 2
+#define CPLD_PIPELINE_DELAY_COR 3      /* RGB565 */
+#endif
+
+#ifdef USE_RGB888_8_BIT_PPI
+#define LCD_BPP                24      /* Bit Per Pixel */
+#define CLOCKS_PER_PIX 3
+#define CPLD_PIPELINE_DELAY_COR 5      /* RGB888 */
+#endif
+
+       /*
+        * HS and VS timing parameters (all in number of PPI clk ticks)
+        */
+
+#define U_LINE         4                               /* Blanking Lines */
+
+#define H_ACTPIX       (LCD_X_RES * CLOCKS_PER_PIX)    /* active horizontal pixel */
+#define H_PERIOD       (336 * CLOCKS_PER_PIX)          /* HS period */
+#define H_PULSE                (2 * CLOCKS_PER_PIX)                            /* HS pulse width */
+#define H_START                (7 * CLOCKS_PER_PIX + CPLD_PIPELINE_DELAY_COR)  /* first valid pixel */
+
+#define        V_LINES         (LCD_Y_RES + U_LINE)            /* total vertical lines */
+#define V_PULSE                (2 * CLOCKS_PER_PIX)            /* VS pulse width (1-5 H_PERIODs) */
+#define V_PERIOD       (H_PERIOD * V_LINES)            /* VS period */
+
+#define ACTIVE_VIDEO_MEM_OFFSET                ((U_LINE / 2) * LCD_X_RES * (LCD_BPP / 8))
+
+#define BFIN_LCD_NBR_PALETTE_ENTRIES   256
+
+#define PPI_TX_MODE                    0x2
+#define PPI_XFER_TYPE_11               0xC
+#define PPI_PORT_CFG_01                        0x10
+#define PPI_POLS_1                     0x8000
+
+#if (CLOCKS_PER_PIX > 1)
+#define PPI_PMODE (DLEN_8 | PACK_EN)
+#else
+#define PPI_PMODE (DLEN_16)
+#endif
+
+#define LQ035_INDEX                    0x74
+#define LQ035_DATA                     0x76
+
+#define LQ035_DRIVER_OUTPUT_CTL                0x1
+#define LQ035_SHUT_CTL                 0x11
+
+#define LQ035_DRIVER_OUTPUT_MASK       (LQ035_LR | LQ035_TB | LQ035_BGR | LQ035_REV)
+#define LQ035_DRIVER_OUTPUT_DEFAULT    (0x2AEF & ~LQ035_DRIVER_OUTPUT_MASK)
+
+#define LQ035_SHUT                     (1 << 0)        /* Shutdown */
+#define LQ035_ON                       (0 << 0)        /* Shutdown */
+
+struct bfin_lq035q1fb_info {
+       struct fb_info *fb;
+       struct device *dev;
+       struct spi_driver spidrv;
+       struct bfin_lq035q1fb_disp_info *disp_info;
+       unsigned char *fb_buffer;       /* RGB Buffer */
+       dma_addr_t dma_handle;
+       int lq035_open_cnt;
+       int irq;
+       spinlock_t lock;        /* lock */
+       u32 pseudo_pal[16];
+};
+
+static int nocursor;
+module_param(nocursor, int, 0644);
+MODULE_PARM_DESC(nocursor, "cursor enable/disable");
+
+struct spi_control {
+       unsigned short mode;
+};
+
+static int lq035q1_control(struct spi_device *spi, unsigned char reg, unsigned short value)
+{
+       int ret;
+       u8 regs[3] = { LQ035_INDEX, 0, 0 };
+       u8 dat[3] = { LQ035_DATA, 0, 0 };
+
+       if (!spi)
+               return -ENODEV;
+
+       regs[2] = reg;
+       dat[1] = value >> 8;
+       dat[2] = value & 0xFF;
+
+       ret = spi_write(spi, regs, ARRAY_SIZE(regs));
+       ret |= spi_write(spi, dat, ARRAY_SIZE(dat));
+       return ret;
+}
+
+static int __devinit lq035q1_spidev_probe(struct spi_device *spi)
+{
+       int ret;
+       struct spi_control *ctl;
+       struct bfin_lq035q1fb_info *info = container_of(spi->dev.driver,
+                                               struct bfin_lq035q1fb_info,
+                                               spidrv.driver);
+
+       ctl = kzalloc(sizeof(*ctl), GFP_KERNEL);
+
+       if (!ctl)
+               return -ENOMEM;
+
+       ctl->mode = (info->disp_info->mode &
+               LQ035_DRIVER_OUTPUT_MASK) | LQ035_DRIVER_OUTPUT_DEFAULT;
+
+       ret = lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_ON);
+       ret |= lq035q1_control(spi, LQ035_DRIVER_OUTPUT_CTL, ctl->mode);
+       if (ret)
+               return ret;
+
+       spi_set_drvdata(spi, ctl);
+
+       return 0;
+}
+
+static int lq035q1_spidev_remove(struct spi_device *spi)
+{
+       return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT);
+}
+
+#ifdef CONFIG_PM
+static int lq035q1_spidev_suspend(struct spi_device *spi, pm_message_t state)
+{
+       return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT);
+}
+
+static int lq035q1_spidev_resume(struct spi_device *spi)
+{
+       int ret;
+       struct spi_control *ctl = spi_get_drvdata(spi);
+
+       ret = lq035q1_control(spi, LQ035_DRIVER_OUTPUT_CTL, ctl->mode);
+       if (ret)
+               return ret;
+
+       return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_ON);
+}
+#else
+# define lq035q1_spidev_suspend NULL
+# define lq035q1_spidev_resume  NULL
+#endif
+
+/* Power down all displays on reboot, poweroff or halt */
+static void lq035q1_spidev_shutdown(struct spi_device *spi)
+{
+       lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT);
+}
+
+static int lq035q1_backlight(struct bfin_lq035q1fb_info *info, unsigned arg)
+{
+       if (info->disp_info->use_bl)
+               gpio_set_value(info->disp_info->gpio_bl, arg);
+
+       return 0;
+}
+
+static void bfin_lq035q1_config_ppi(struct bfin_lq035q1fb_info *fbi)
+{
+       bfin_write_PPI_DELAY(H_START);
+       bfin_write_PPI_COUNT(H_ACTPIX - 1);
+       bfin_write_PPI_FRAME(V_LINES);
+
+       bfin_write_PPI_CONTROL(PPI_TX_MODE |       /* output mode , PORT_DIR */
+                               PPI_XFER_TYPE_11 | /* sync mode XFR_TYPE */
+                               PPI_PORT_CFG_01 |  /* two frame sync PORT_CFG */
+                               PPI_PMODE |        /* 8/16 bit data length / PACK_EN? */
+                               PPI_POLS_1);       /* faling edge syncs POLS */
+}
+
+static inline void bfin_lq035q1_disable_ppi(void)
+{
+       bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN);
+}
+
+static inline void bfin_lq035q1_enable_ppi(void)
+{
+       bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
+}
+
+static void bfin_lq035q1_start_timers(void)
+{
+       enable_gptimers(TIMER_VSYNCbit | TIMER_HSYNCbit);
+}
+
+static void bfin_lq035q1_stop_timers(void)
+{
+       disable_gptimers(TIMER_HSYNCbit | TIMER_VSYNCbit);
+
+       set_gptimer_status(0, TIMER_HSYNC_STATUS_TRUN | TIMER_VSYNC_STATUS_TRUN |
+                               TIMER_HSYNC_STATUS_TIMIL | TIMER_VSYNC_STATUS_TIMIL |
+                                TIMER_HSYNC_STATUS_TOVF | TIMER_VSYNC_STATUS_TOVF);
+
+}
+
+static void bfin_lq035q1_init_timers(void)
+{
+
+       bfin_lq035q1_stop_timers();
+
+       set_gptimer_period(TIMER_HSYNC_id, H_PERIOD);
+       set_gptimer_pwidth(TIMER_HSYNC_id, H_PULSE);
+       set_gptimer_config(TIMER_HSYNC_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT |
+                                     TIMER_TIN_SEL | TIMER_CLK_SEL|
+                                     TIMER_EMU_RUN);
+
+       set_gptimer_period(TIMER_VSYNC_id, V_PERIOD);
+       set_gptimer_pwidth(TIMER_VSYNC_id, V_PULSE);
+       set_gptimer_config(TIMER_VSYNC_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT |
+                                     TIMER_TIN_SEL | TIMER_CLK_SEL |
+                                     TIMER_EMU_RUN);
+
+}
+
+static void bfin_lq035q1_config_dma(struct bfin_lq035q1fb_info *fbi)
+{
+
+       set_dma_config(CH_PPI,
+                      set_bfin_dma_config(DIR_READ, DMA_FLOW_AUTO,
+                                          INTR_DISABLE, DIMENSION_2D,
+                                          DATA_SIZE_16,
+                                          DMA_NOSYNC_KEEP_DMA_BUF));
+       set_dma_x_count(CH_PPI, (LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE);
+       set_dma_x_modify(CH_PPI, DMA_BUS_SIZE / 8);
+       set_dma_y_count(CH_PPI, V_LINES);
+
+       set_dma_y_modify(CH_PPI, DMA_BUS_SIZE / 8);
+       set_dma_start_addr(CH_PPI, (unsigned long)fbi->fb_buffer);
+
+}
+
+#if (CLOCKS_PER_PIX == 1)
+static const u16 ppi0_req_16[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+                           P_PPI0_D0, P_PPI0_D1, P_PPI0_D2,
+                           P_PPI0_D3, P_PPI0_D4, P_PPI0_D5,
+                           P_PPI0_D6, P_PPI0_D7, P_PPI0_D8,
+                           P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
+                           P_PPI0_D12, P_PPI0_D13, P_PPI0_D14,
+                           P_PPI0_D15, 0};
+#else
+static const u16 ppi0_req_16[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+                           P_PPI0_D0, P_PPI0_D1, P_PPI0_D2,
+                           P_PPI0_D3, P_PPI0_D4, P_PPI0_D5,
+                           P_PPI0_D6, P_PPI0_D7, 0};
+#endif
+
+static inline void bfin_lq035q1_free_ports(void)
+{
+       peripheral_free_list(ppi0_req_16);
+       if (ANOMALY_05000400)
+               gpio_free(P_IDENT(P_PPI0_FS3));
+}
+
+static int __devinit bfin_lq035q1_request_ports(struct platform_device *pdev)
+{
+       /* ANOMALY_05000400 - PPI Does Not Start Properly In Specific Mode:
+        * Drive PPI_FS3 Low
+        */
+       if (ANOMALY_05000400) {
+               int ret = gpio_request(P_IDENT(P_PPI0_FS3), "PPI_FS3");
+               if (ret)
+                       return ret;
+               gpio_direction_output(P_IDENT(P_PPI0_FS3), 0);
+       }
+
+       if (peripheral_request_list(ppi0_req_16, DRIVER_NAME)) {
+               dev_err(&pdev->dev, "requesting peripherals failed\n");
+               return -EFAULT;
+       }
+
+       return 0;
+}
+
+static int bfin_lq035q1_fb_open(struct fb_info *info, int user)
+{
+       struct bfin_lq035q1fb_info *fbi = info->par;
+
+       spin_lock(&fbi->lock);
+       fbi->lq035_open_cnt++;
+
+       if (fbi->lq035_open_cnt <= 1) {
+
+               bfin_lq035q1_disable_ppi();
+               SSYNC();
+
+               bfin_lq035q1_config_dma(fbi);
+               bfin_lq035q1_config_ppi(fbi);
+               bfin_lq035q1_init_timers();
+
+               /* start dma */
+               enable_dma(CH_PPI);
+               bfin_lq035q1_enable_ppi();
+               bfin_lq035q1_start_timers();
+               lq035q1_backlight(fbi, 1);
+       }
+
+       spin_unlock(&fbi->lock);
+
+       return 0;
+}
+
+static int bfin_lq035q1_fb_release(struct fb_info *info, int user)
+{
+       struct bfin_lq035q1fb_info *fbi = info->par;
+
+       spin_lock(&fbi->lock);
+
+       fbi->lq035_open_cnt--;
+
+       if (fbi->lq035_open_cnt <= 0) {
+               lq035q1_backlight(fbi, 0);
+               bfin_lq035q1_disable_ppi();
+               SSYNC();
+               disable_dma(CH_PPI);
+               bfin_lq035q1_stop_timers();
+       }
+
+       spin_unlock(&fbi->lock);
+
+       return 0;
+}
+
+static int bfin_lq035q1_fb_check_var(struct fb_var_screeninfo *var,
+                                    struct fb_info *info)
+{
+       switch (var->bits_per_pixel) {
+#if (LCD_BPP == 24)
+       case 24:/* TRUECOLOUR, 16m */
+#else
+       case 16:/* DIRECTCOLOUR, 64k */
+#endif
+               var->red.offset = info->var.red.offset;
+               var->green.offset = info->var.green.offset;
+               var->blue.offset = info->var.blue.offset;
+               var->red.length = info->var.red.length;
+               var->green.length = info->var.green.length;
+               var->blue.length = info->var.blue.length;
+               var->transp.offset = 0;
+               var->transp.length = 0;
+               var->transp.msb_right = 0;
+               var->red.msb_right = 0;
+               var->green.msb_right = 0;
+               var->blue.msb_right = 0;
+               break;
+       default:
+               pr_debug("%s: depth not supported: %u BPP\n", __func__,
+                        var->bits_per_pixel);
+               return -EINVAL;
+       }
+
+       if (info->var.xres != var->xres || info->var.yres != var->yres ||
+           info->var.xres_virtual != var->xres_virtual ||
+           info->var.yres_virtual != var->yres_virtual) {
+               pr_debug("%s: Resolution not supported: X%u x Y%u \n",
+                        __func__, var->xres, var->yres);
+               return -EINVAL;
+       }
+
+       /*
+        *  Memory limit
+        */
+
+       if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
+               pr_debug("%s: Memory Limit requested yres_virtual = %u\n",
+                        __func__, var->yres_virtual);
+               return -ENOMEM;
+       }
+
+
+       return 0;
+}
+
+int bfin_lq035q1_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+       if (nocursor)
+               return 0;
+       else
+               return -EINVAL; /* just to force soft_cursor() call */
+}
+
+static int bfin_lq035q1_fb_setcolreg(u_int regno, u_int red, u_int green,
+                                  u_int blue, u_int transp,
+                                  struct fb_info *info)
+{
+       if (regno >= BFIN_LCD_NBR_PALETTE_ENTRIES)
+               return -EINVAL;
+
+       if (info->var.grayscale) {
+               /* grayscale = 0.30*R + 0.59*G + 0.11*B */
+               red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
+       }
+
+       if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+
+               u32 value;
+               /* Place color in the pseudopalette */
+               if (regno > 16)
+                       return -EINVAL;
+
+               red >>= (16 - info->var.red.length);
+               green >>= (16 - info->var.green.length);
+               blue >>= (16 - info->var.blue.length);
+
+               value = (red << info->var.red.offset) |
+                   (green << info->var.green.offset) |
+                   (blue << info->var.blue.offset);
+               value &= 0xFFFFFF;
+
+               ((u32 *) (info->pseudo_palette))[regno] = value;
+
+       }
+
+       return 0;
+}
+
+static struct fb_ops bfin_lq035q1_fb_ops = {
+       .owner = THIS_MODULE,
+       .fb_open = bfin_lq035q1_fb_open,
+       .fb_release = bfin_lq035q1_fb_release,
+       .fb_check_var = bfin_lq035q1_fb_check_var,
+       .fb_fillrect = cfb_fillrect,
+       .fb_copyarea = cfb_copyarea,
+       .fb_imageblit = cfb_imageblit,
+       .fb_cursor = bfin_lq035q1_fb_cursor,
+       .fb_setcolreg = bfin_lq035q1_fb_setcolreg,
+};
+
+static irqreturn_t bfin_lq035q1_irq_error(int irq, void *dev_id)
+{
+       /*struct bfin_lq035q1fb_info *info = (struct bfin_lq035q1fb_info *)dev_id;*/
+
+       u16 status = bfin_read_PPI_STATUS();
+       bfin_write_PPI_STATUS(-1);
+
+       if (status) {
+               bfin_lq035q1_disable_ppi();
+               disable_dma(CH_PPI);
+
+               /* start dma */
+               enable_dma(CH_PPI);
+               bfin_lq035q1_enable_ppi();
+               bfin_write_PPI_STATUS(-1);
+       }
+
+       return IRQ_HANDLED;
+}
+
+static int __devinit bfin_lq035q1_probe(struct platform_device *pdev)
+{
+       struct bfin_lq035q1fb_info *info;
+       struct fb_info *fbinfo;
+       int ret;
+
+       ret = request_dma(CH_PPI, DRIVER_NAME"_CH_PPI");
+       if (ret < 0) {
+               dev_err(&pdev->dev, "PPI DMA unavailable\n");
+               goto out1;
+       }
+
+       fbinfo = framebuffer_alloc(sizeof(*info), &pdev->dev);
+       if (!fbinfo) {
+               ret = -ENOMEM;
+               goto out2;
+       }
+
+       info = fbinfo->par;
+       info->fb = fbinfo;
+       info->dev = &pdev->dev;
+
+       info->disp_info = pdev->dev.platform_data;
+
+       platform_set_drvdata(pdev, fbinfo);
+
+       strcpy(fbinfo->fix.id, DRIVER_NAME);
+
+       fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
+       fbinfo->fix.type_aux = 0;
+       fbinfo->fix.xpanstep = 0;
+       fbinfo->fix.ypanstep = 0;
+       fbinfo->fix.ywrapstep = 0;
+       fbinfo->fix.accel = FB_ACCEL_NONE;
+       fbinfo->fix.visual = FB_VISUAL_TRUECOLOR;
+
+       fbinfo->var.nonstd = 0;
+       fbinfo->var.activate = FB_ACTIVATE_NOW;
+       fbinfo->var.height = -1;
+       fbinfo->var.width = -1;
+       fbinfo->var.accel_flags = 0;
+       fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
+
+       fbinfo->var.xres = LCD_X_RES;
+       fbinfo->var.xres_virtual = LCD_X_RES;
+       fbinfo->var.yres = LCD_Y_RES;
+       fbinfo->var.yres_virtual = LCD_Y_RES;
+       fbinfo->var.bits_per_pixel = LCD_BPP;
+
+       if (info->disp_info->mode & LQ035_BGR) {
+#if (LCD_BPP == 24)
+               fbinfo->var.red.offset = 0;
+               fbinfo->var.green.offset = 8;
+               fbinfo->var.blue.offset = 16;
+#else
+               fbinfo->var.red.offset = 0;
+               fbinfo->var.green.offset = 5;
+               fbinfo->var.blue.offset = 11;
+#endif
+       } else {
+#if (LCD_BPP == 24)
+               fbinfo->var.red.offset = 16;
+               fbinfo->var.green.offset = 8;
+               fbinfo->var.blue.offset = 0;
+#else
+               fbinfo->var.red.offset = 11;
+               fbinfo->var.green.offset = 5;
+               fbinfo->var.blue.offset = 0;
+#endif
+       }
+
+       fbinfo->var.transp.offset = 0;
+
+#if (LCD_BPP == 24)
+       fbinfo->var.red.length = 8;
+       fbinfo->var.green.length = 8;
+       fbinfo->var.blue.length = 8;
+#else
+       fbinfo->var.red.length = 5;
+       fbinfo->var.green.length = 6;
+       fbinfo->var.blue.length = 5;
+#endif
+
+       fbinfo->var.transp.length = 0;
+
+       fbinfo->fix.smem_len = LCD_X_RES * LCD_Y_RES * LCD_BPP / 8
+                               + ACTIVE_VIDEO_MEM_OFFSET;
+
+       fbinfo->fix.line_length = fbinfo->var.xres_virtual *
+           fbinfo->var.bits_per_pixel / 8;
+
+
+       fbinfo->fbops = &bfin_lq035q1_fb_ops;
+       fbinfo->flags = FBINFO_FLAG_DEFAULT;
+
+       info->fb_buffer =
+           dma_alloc_coherent(NULL, fbinfo->fix.smem_len, &info->dma_handle,
+                              GFP_KERNEL);
+
+       if (NULL == info->fb_buffer) {
+               dev_err(&pdev->dev, "couldn't allocate dma buffer\n");
+               ret = -ENOMEM;
+               goto out3;
+       }
+
+       fbinfo->screen_base = (void *)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET;
+       fbinfo->fix.smem_start = (int)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET;
+
+       fbinfo->fbops = &bfin_lq035q1_fb_ops;
+
+       fbinfo->pseudo_palette = &info->pseudo_pal;
+
+       ret = fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0);
+       if (ret < 0) {
+               dev_err(&pdev->dev, "failed to allocate colormap (%d entries)\n",
+                      BFIN_LCD_NBR_PALETTE_ENTRIES);
+               goto out4;
+       }
+
+       ret = bfin_lq035q1_request_ports(pdev);
+       if (ret) {
+               dev_err(&pdev->dev, "couldn't request gpio port\n");
+               goto out6;
+       }
+
+       info->irq = platform_get_irq(pdev, 0);
+       if (info->irq < 0) {
+               ret = -EINVAL;
+               goto out7;
+       }
+
+       ret = request_irq(info->irq, bfin_lq035q1_irq_error, IRQF_DISABLED,
+                       DRIVER_NAME" PPI ERROR", info);
+       if (ret < 0) {
+               dev_err(&pdev->dev, "unable to request PPI ERROR IRQ\n");
+               goto out7;
+       }
+
+       info->spidrv.driver.name = DRIVER_NAME"-spi";
+       info->spidrv.probe    = lq035q1_spidev_probe;
+       info->spidrv.remove   = __devexit_p(lq035q1_spidev_remove);
+       info->spidrv.shutdown = lq035q1_spidev_shutdown;
+       info->spidrv.suspend  = lq035q1_spidev_suspend;
+       info->spidrv.resume   = lq035q1_spidev_resume;
+
+       ret = spi_register_driver(&info->spidrv);
+       if (ret < 0) {
+               dev_err(&pdev->dev, "couldn't register SPI Interface\n");
+               goto out8;
+       }
+
+       if (info->disp_info->use_bl) {
+               ret = gpio_request(info->disp_info->gpio_bl, "LQ035 Backlight");
+
+               if (ret) {
+                       dev_err(&pdev->dev, "failed to request GPIO %d\n",
+                               info->disp_info->gpio_bl);
+                       goto out9;
+               }
+               gpio_direction_output(info->disp_info->gpio_bl, 0);
+       }
+
+       ret = register_framebuffer(fbinfo);
+       if (ret < 0) {
+               dev_err(&pdev->dev, "unable to register framebuffer\n");
+               goto out10;
+       }
+
+       dev_info(&pdev->dev, "%dx%d %d-bit RGB FrameBuffer initialized\n",
+               LCD_X_RES, LCD_Y_RES, LCD_BPP);
+
+       return 0;
+
+ out10:
+       if (info->disp_info->use_bl)
+               gpio_free(info->disp_info->gpio_bl);
+ out9:
+       spi_unregister_driver(&info->spidrv);
+ out8:
+       free_irq(info->irq, info);
+ out7:
+       bfin_lq035q1_free_ports();
+ out6:
+       fb_dealloc_cmap(&fbinfo->cmap);
+ out4:
+       dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
+                         info->dma_handle);
+ out3:
+       framebuffer_release(fbinfo);
+ out2:
+       free_dma(CH_PPI);
+ out1:
+       platform_set_drvdata(pdev, NULL);
+
+       return ret;
+}
+
+static int __devexit bfin_lq035q1_remove(struct platform_device *pdev)
+{
+       struct fb_info *fbinfo = platform_get_drvdata(pdev);
+       struct bfin_lq035q1fb_info *info = fbinfo->par;
+
+       if (info->disp_info->use_bl)
+               gpio_free(info->disp_info->gpio_bl);
+
+       spi_unregister_driver(&info->spidrv);
+
+       unregister_framebuffer(fbinfo);
+
+       free_dma(CH_PPI);
+       free_irq(info->irq, info);
+
+       if (info->fb_buffer != NULL)
+               dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
+                                 info->dma_handle);
+
+       fb_dealloc_cmap(&fbinfo->cmap);
+
+       bfin_lq035q1_free_ports();
+
+       platform_set_drvdata(pdev, NULL);
+       framebuffer_release(fbinfo);
+
+       dev_info(&pdev->dev, "unregistered LCD driver\n");
+
+       return 0;
+}
+
+#ifdef CONFIG_PM
+static int bfin_lq035q1_suspend(struct device *dev)
+{
+       struct fb_info *fbinfo = dev_get_drvdata(dev);
+       struct bfin_lq035q1fb_info *info = fbinfo->par;
+
+       if (info->lq035_open_cnt) {
+               lq035q1_backlight(info, 0);
+               bfin_lq035q1_disable_ppi();
+               SSYNC();
+               disable_dma(CH_PPI);
+               bfin_lq035q1_stop_timers();
+               bfin_write_PPI_STATUS(-1);
+       }
+
+       return 0;
+}
+
+static int bfin_lq035q1_resume(struct device *dev)
+{
+       struct fb_info *fbinfo = dev_get_drvdata(dev);
+       struct bfin_lq035q1fb_info *info = fbinfo->par;
+
+       if (info->lq035_open_cnt) {
+               bfin_lq035q1_disable_ppi();
+               SSYNC();
+
+               bfin_lq035q1_config_dma(info);
+               bfin_lq035q1_config_ppi(info);
+               bfin_lq035q1_init_timers();
+
+               /* start dma */
+               enable_dma(CH_PPI);
+               bfin_lq035q1_enable_ppi();
+               bfin_lq035q1_start_timers();
+               lq035q1_backlight(info, 1);
+       }
+
+       return 0;
+}
+
+static struct dev_pm_ops bfin_lq035q1_dev_pm_ops = {
+       .suspend = bfin_lq035q1_suspend,
+       .resume  = bfin_lq035q1_resume,
+};
+#endif
+
+static struct platform_driver bfin_lq035q1_driver = {
+       .probe   = bfin_lq035q1_probe,
+       .remove  = __devexit_p(bfin_lq035q1_remove),
+       .driver = {
+               .name = DRIVER_NAME,
+#ifdef CONFIG_PM
+               .pm   = &bfin_lq035q1_dev_pm_ops,
+#endif
+       },
+};
+
+static int __init bfin_lq035q1_driver_init(void)
+{
+       return platform_driver_register(&bfin_lq035q1_driver);
+}
+module_init(bfin_lq035q1_driver_init);
+
+static void __exit bfin_lq035q1_driver_cleanup(void)
+{
+       platform_driver_unregister(&bfin_lq035q1_driver);
+}
+module_exit(bfin_lq035q1_driver_cleanup);
+
+MODULE_DESCRIPTION("Blackfin TFT LCD Driver");
+MODULE_LICENSE("GPL");