net/phy: add IC+ IP101A and support APS.

This patch adds the IC+ IP101A Single port 10/100 PHY
and supports the APS (i.e. power saving mode while link is down)
for both IP1001 and IP101A (where this mode is supported).

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index d4cbc2922b23e957cfa801d6b1a7471378828798..6e344e59caf7e9457b8f973b57aba05b33cc06d5 100644 (file)
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -30,10 +30,17 @@
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
-MODULE_DESCRIPTION("ICPlus IP175C/IC1001 PHY drivers");
+MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IC1001 PHY drivers");
 MODULE_AUTHOR("Michael Barkowski");
 MODULE_LICENSE("GPL");
 
+/* IP101A/IP1001 */
+#define IP10XX_SPEC_CTRL_STATUS                16  /* Spec. Control Register */
+#define IP1001_SPEC_CTRL_STATUS_2      20  /* IP1001 Spec. Control Reg 2 */
+#define IP1001_PHASE_SEL_MASK          3 /* IP1001 RX/TXPHASE_SEL */
+#define IP1001_APS_ON                  11  /* IP1001 APS Mode  bit */
+#define IP101A_APS_ON                  2   /* IP101A APS Mode bit */
+
 static int ip175c_config_init(struct phy_device *phydev)
 {
        int err, i;
@@ -89,27 +96,58 @@ static int ip175c_config_init(struct phy_device *phydev)
        return 0;
 }
 
-static int ip1001_config_init(struct phy_device *phydev)
+static int ip1xx_reset(struct phy_device *phydev)
 {
-       int err, value;
+       int err, bmcr;
 
        /* Software Reset PHY */
-       value = phy_read(phydev, MII_BMCR);
-       value |= BMCR_RESET;
-       err = phy_write(phydev, MII_BMCR, value);
+       bmcr = phy_read(phydev, MII_BMCR);
+       bmcr |= BMCR_RESET;
+       err = phy_write(phydev, MII_BMCR, bmcr);
        if (err < 0)
                return err;
 
        do {
-               value = phy_read(phydev, MII_BMCR);
-       } while (value & BMCR_RESET);
+               bmcr = phy_read(phydev, MII_BMCR);
+       } while (bmcr & BMCR_RESET);
+
+       return err;
+}
+
+static int ip1001_config_init(struct phy_device *phydev)
+{
+       int c;
+
+       c = ip1xx_reset(phydev);
+       if (c < 0)
+               return c;
+
+       /* Enable Auto Power Saving mode */
+       c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2);
+       c |= IP1001_APS_ON;
+       if (c < 0)
+               return c;
 
        /* Additional delay (2ns) used to adjust RX clock phase
         * at GMII/ RGMII interface */
-       value = phy_read(phydev, 16);
-       value |= 0x3;
+       c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
+       c |= IP1001_PHASE_SEL_MASK;
+
+       return phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
+}
+
+static int ip101a_config_init(struct phy_device *phydev)
+{
+       int c;
 
-       return phy_write(phydev, 16, value);
+       c = ip1xx_reset(phydev);
+       if (c < 0)
+               return c;
+
+       /* Enable Auto Power Saving mode */
+       c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
+       c |= IP101A_APS_ON;
+       return c;
 }
 
 static int ip175c_read_status(struct phy_device *phydev)
@@ -158,6 +196,20 @@ static struct phy_driver ip1001_driver = {
        .driver         = { .owner = THIS_MODULE,},
 };
 
+static struct phy_driver ip101a_driver = {
+       .phy_id         = 0x02430c54,
+       .name           = "ICPlus IP101A",
+       .phy_id_mask    = 0x0ffffff0,
+       .features       = PHY_BASIC_FEATURES | SUPPORTED_Pause |
+                         SUPPORTED_Asym_Pause,
+       .config_init    = &ip101a_config_init,
+       .config_aneg    = &genphy_config_aneg,
+       .read_status    = &genphy_read_status,
+       .suspend        = genphy_suspend,
+       .resume         = genphy_resume,
+       .driver         = { .owner = THIS_MODULE,},
+};
+
 static int __init icplus_init(void)
 {
        int ret = 0;
@@ -166,12 +218,17 @@ static int __init icplus_init(void)
        if (ret < 0)
                return -ENODEV;
 
+       ret = phy_driver_register(&ip101a_driver);
+       if (ret < 0)
+               return -ENODEV;
+
        return phy_driver_register(&ip175c_driver);
 }
 
 static void __exit icplus_exit(void)
 {
        phy_driver_unregister(&ip1001_driver);
+       phy_driver_unregister(&ip101a_driver);
        phy_driver_unregister(&ip175c_driver);
 }