Staging: et131x: pci_alloc_consistent DMA alignment is guaranteed

So we can remove this alignment work.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/staging/et131x/et1310_rx.c b/drivers/staging/et131x/et1310_rx.c
index c0695b041f309809e63e036540cb2777ace1b1b3..8f22bb969e898d6e66a0d4dc96a569e482542d77 100644 (file)
--- a/drivers/staging/et131x/et1310_rx.c
+++ b/drivers/staging/et131x/et1310_rx.c
@@ -342,7 +342,7 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
            sizeof(PKT_STAT_DESC_t) * adapter->RxRing.PsrNumEntries;
 
        rx_ring->pPSRingVa = pci_alloc_consistent(adapter->pdev,
-                                                 pktStatRingSize + 0x0fff,
+                                                 pktStatRingSize,
                                                  &rx_ring->pPSRingPa);
 
        if (!rx_ring->pPSRingVa) {
@@ -350,45 +350,26 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
                          "Cannot alloc memory for Packet Status Ring\n");
                return -ENOMEM;
        }
+       printk("PSR %lx\n", (unsigned long) rx_ring->pPSRingPa);
 
-       /* Save physical address
-        *
+       /*
         * NOTE : pci_alloc_consistent(), used above to alloc DMA regions,
         * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
         * are ever returned, make sure the high part is retrieved here before
         * storing the adjusted address.
         */
-       rx_ring->pPSRingRealPa = rx_ring->pPSRingPa;
-
-       /* Align Packet Status Ring on a 4K boundary */
-       et131x_align_allocated_memory(adapter,
-                                     &rx_ring->pPSRingRealPa,
-                                     &rx_ring->pPSRingOffset, 0x0FFF);
-
-       rx_ring->pPSRingVa = (void *)((uint8_t *) rx_ring->pPSRingVa +
-                                     rx_ring->pPSRingOffset);
 
        /* Allocate an area of memory for writeback of status information */
        rx_ring->pRxStatusVa = pci_alloc_consistent(adapter->pdev,
-                                                   sizeof(RX_STATUS_BLOCK_t) +
-                                                   0x7, &rx_ring->pRxStatusPa);
+                                                   sizeof(RX_STATUS_BLOCK_t),
+                                                   &rx_ring->pRxStatusPa);
        if (!rx_ring->pRxStatusVa) {
                dev_err(&adapter->pdev->dev,
                          "Cannot alloc memory for Status Block\n");
                return -ENOMEM;
        }
-
-       /* Save physical address */
-       rx_ring->RxStatusRealPA = rx_ring->pRxStatusPa;
-
-       /* Align write back on an 8 byte boundary */
-       et131x_align_allocated_memory(adapter,
-                                     &rx_ring->RxStatusRealPA,
-                                     &rx_ring->RxStatusOffset, 0x07);
-
-       rx_ring->pRxStatusVa = (void *)((uint8_t *) rx_ring->pRxStatusVa +
-                                       rx_ring->RxStatusOffset);
        rx_ring->NumRfd = NIC_DEFAULT_NUM_RFD;
+       printk("PRS %lx\n", (unsigned long)rx_ring->pRxStatusPa);
 
        /* Recv
         * pci_pool_create initializes a lookaside list. After successful
@@ -523,14 +504,10 @@ void et131x_rx_dma_memory_free(struct et131x_adapter *adapter)
 
        /* Free Packet Status Ring */
        if (rx_ring->pPSRingVa) {
-               rx_ring->pPSRingVa = (void *)((uint8_t *) rx_ring->pPSRingVa -
-                                             rx_ring->pPSRingOffset);
-
                pktStatRingSize =
                    sizeof(PKT_STAT_DESC_t) * adapter->RxRing.PsrNumEntries;
 
-               pci_free_consistent(adapter->pdev,
-                                   pktStatRingSize + 0x0fff,
+               pci_free_consistent(adapter->pdev, pktStatRingSize,
                                    rx_ring->pPSRingVa, rx_ring->pPSRingPa);
 
                rx_ring->pPSRingVa = NULL;
@@ -538,11 +515,8 @@ void et131x_rx_dma_memory_free(struct et131x_adapter *adapter)
 
        /* Free area of memory for the writeback of status information */
        if (rx_ring->pRxStatusVa) {
-               rx_ring->pRxStatusVa = (void *)((uint8_t *)
-                               rx_ring->pRxStatusVa - rx_ring->RxStatusOffset);
-
                pci_free_consistent(adapter->pdev,
-                               sizeof(RX_STATUS_BLOCK_t) + 0x7,
+                               sizeof(RX_STATUS_BLOCK_t),
                                rx_ring->pRxStatusVa, rx_ring->pRxStatusPa);
 
                rx_ring->pRxStatusVa = NULL;
@@ -675,18 +649,18 @@ void ConfigRxDmaRegs(struct et131x_adapter *etdev)
         * are ever returned, make sure the high part is retrieved here
         * before storing the adjusted address.
         */
-       writel((uint32_t) (pRxLocal->RxStatusRealPA >> 32),
+       writel((uint32_t) ((u64)pRxLocal->pRxStatusPa >> 32),
               &rx_dma->dma_wb_base_hi);
-       writel((uint32_t) pRxLocal->RxStatusRealPA, &rx_dma->dma_wb_base_lo);
+       writel((uint32_t) pRxLocal->pRxStatusPa, &rx_dma->dma_wb_base_lo);
 
        memset(pRxLocal->pRxStatusVa, 0, sizeof(RX_STATUS_BLOCK_t));
 
        /* Set the address and parameters of the packet status ring into the
         * 1310's registers
         */
-       writel((uint32_t) (pRxLocal->pPSRingRealPa >> 32),
+       writel((uint32_t) ((u64)pRxLocal->pPSRingPa >> 32),
               &rx_dma->psr_base_hi);
-       writel((uint32_t) pRxLocal->pPSRingRealPa, &rx_dma->psr_base_lo);
+       writel((uint32_t) pRxLocal->pPSRingPa, &rx_dma->psr_base_lo);
        writel(pRxLocal->PsrNumEntries - 1, &rx_dma->psr_num_des.value);
        writel(0, &rx_dma->psr_full_offset.value);
 

diff --git a/drivers/staging/et131x/et1310_rx.h b/drivers/staging/et131x/et1310_rx.h
index b02fac8cd3cd62bc2a5e815a78108797a8df8658..03e859b43111b4d558e3a40937cbc69be5166fcb 100644 (file)
--- a/drivers/staging/et131x/et1310_rx.h
+++ b/drivers/staging/et131x/et1310_rx.h
@@ -309,15 +309,11 @@ typedef struct _rx_ring_t {
 
        void *pPSRingVa;
        dma_addr_t pPSRingPa;
-       uint64_t pPSRingRealPa;
-       uint64_t pPSRingOffset;
        RXDMA_PSR_FULL_OFFSET_t local_psr_full;
        u32 PsrNumEntries;
 
        void *pRxStatusVa;
        dma_addr_t pRxStatusPa;
-       uint64_t RxStatusRealPA;
-       uint64_t RxStatusOffset;
 
        struct list_head RecvBufferPool;
 

diff --git a/drivers/staging/et131x/et1310_tx.c b/drivers/staging/et131x/et1310_tx.c
index 8beb029fab1c1a453c19b2a5662cbb7c4412152b..b2e4950b002a06e45cbcbe78ea31e08efbab0362 100644 (file)
--- a/drivers/staging/et131x/et1310_tx.c
+++ b/drivers/staging/et131x/et1310_tx.c
@@ -146,15 +146,6 @@ int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter)
         * are ever returned, make sure the high part is retrieved here before
         * storing the adjusted address.
         */
-       tx_ring->pTxDescRingAdjustedPa = tx_ring->tx_desc_ring_pa;
-
-       /* Align Tx Descriptor Ring on a 4k (0x1000) byte boundary */
-       et131x_align_allocated_memory(adapter,
-                                     &tx_ring->pTxDescRingAdjustedPa,
-                                     &tx_ring->TxDescOffset, 0x0FFF);
-
-       tx_ring->tx_desc_ring += tx_ring->TxDescOffset;
-
        /* Allocate memory for the Tx status block */
        tx_ring->pTxStatusVa = pci_alloc_consistent(adapter->pdev,
                                                    sizeof(TX_STATUS_BLOCK_t),
@@ -190,16 +181,12 @@ void et131x_tx_dma_memory_free(struct et131x_adapter *adapter)
 
        if (adapter->tx_ring.tx_desc_ring) {
                /* Free memory relating to Tx rings here */
-               adapter->tx_ring.tx_desc_ring -= adapter->tx_ring.TxDescOffset;
-
                desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX)
                                                                        + 4096 - 1;
-
                pci_free_consistent(adapter->pdev,
                                    desc_size,
                                    adapter->tx_ring.tx_desc_ring,
                                    adapter->tx_ring.tx_desc_ring_pa);
-
                adapter->tx_ring.tx_desc_ring = NULL;
        }
 
@@ -236,9 +223,9 @@ void ConfigTxDmaRegs(struct et131x_adapter *etdev)
        struct _TXDMA_t __iomem *txdma = &etdev->regs->txdma;
 
        /* Load the hardware with the start of the transmit descriptor ring. */
-       writel((u32) (etdev->tx_ring.pTxDescRingAdjustedPa >> 32),
+       writel((u32) ((u64)etdev->tx_ring.tx_desc_ring_pa >> 32),
               &txdma->pr_base_hi);
-       writel((u32) etdev->tx_ring.pTxDescRingAdjustedPa,
+       writel((u32) etdev->tx_ring.tx_desc_ring_pa,
               &txdma->pr_base_lo);
 
        /* Initialise the transmit DMA engine */

diff --git a/drivers/staging/et131x/et1310_tx.h b/drivers/staging/et131x/et1310_tx.h
index 56b7e2c058ec10cac12977d9f47ea491f2230e05..9a31e97405e89cb58dcf067681bd0d42df733807 100644 (file)
--- a/drivers/staging/et131x/et1310_tx.h
+++ b/drivers/staging/et131x/et1310_tx.h
@@ -162,8 +162,6 @@ struct tx_ring {
        /* The actual descriptor ring */
        struct tx_desc *tx_desc_ring;
        dma_addr_t tx_desc_ring_pa;
-       u64 pTxDescRingAdjustedPa;
-       u64 TxDescOffset;
 
        /* ReadyToSend indicates where we last wrote to in the descriptor ring. */
        u32 txDmaReadyToSend;