MIPS: SEAD3: Implement OF support.

Activate USE_OF for SEAD-3 platform. Add basic DTS file and convert memory
detection and reservations to use OF.

[ralf@linux-mips.org: Remove unnecessary #ifdef wrapper in generic.h.  Make
<asm/mips-boards/generic.h> inclusion work even without prior
<linux/of_fdt.h> inclusion.]

Signed-off-by: Steven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4809/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2ac626ab9d4380014a6f25a24825d79f9ee92205..1110cd718ff5d395e3db55f2d50264447df6839b 100644 (file)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -353,6 +353,7 @@ config MIPS_SEAD3
        select USB_ARCH_HAS_EHCI
        select USB_EHCI_BIG_ENDIAN_DESC
        select USB_EHCI_BIG_ENDIAN_MMIO
+       select USE_OF
        help
          This enables support for the MIPS Technologies SEAD3 evaluation
          board.

diff --git a/arch/mips/include/asm/mips-boards/generic.h b/arch/mips/include/asm/mips-boards/generic.h
index 6e23ceb0ba8caa2c7e632e15125aa1e596ca84ae..c01e286394da0c002ce3eec49f21158a0c791cdb 100644 (file)
--- a/arch/mips/include/asm/mips-boards/generic.h
+++ b/arch/mips/include/asm/mips-boards/generic.h
@@ -87,6 +87,10 @@
 
 extern int mips_revision_sconid;
 
+#ifdef CONFIG_OF
+extern struct boot_param_header __dtb_start;
+#endif
+
 #ifdef CONFIG_PCI
 extern void mips_pcibios_init(void);
 #else

diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
index 626afeac438612843dde40537383c4a5738e34cd..10ec701ce6c72e8cd056fd8ac6fb55b19608d8c8 100644 (file)
--- a/arch/mips/mti-sead3/Makefile
+++ b/arch/mips/mti-sead3/Makefile
@@ -5,10 +5,12 @@
 # Copyright (C) 2008 Wind River Systems, Inc.
 #   written by Ralf Baechle <ralf@linux-mips.org>
 #
+# Copyright (C) 2012 MIPS Technoligies, Inc.  All rights reserved.
+# Steven J. Hill <sjhill@mips.com>
+#
 obj-y                          := sead3-lcd.o sead3-cmdline.o \
                                   sead3-display.o sead3-init.o sead3-int.o \
-                                  sead3-mtd.o sead3-net.o \
-                                  sead3-memory.o sead3-platform.o \
+                                  sead3-mtd.o sead3-net.o sead3-platform.o \
                                   sead3-reset.o sead3-setup.o sead3-time.o
 
 obj-y                          += sead3-i2c-dev.o sead3-i2c.o \
@@ -17,3 +19,7 @@ obj-y                         += sead3-i2c-dev.o sead3-i2c.o \
 
 obj-$(CONFIG_EARLY_PRINTK)     += sead3-console.o
 obj-$(CONFIG_USB_EHCI_HCD)     += sead3-ehci.o
+obj-$(CONFIG_OF)               += sead3.dtb.o
+
+$(obj)/%.dtb: $(obj)/%.dts
+       $(call if_changed,dtc)

diff --git a/arch/mips/mti-sead3/sead3-init.c b/arch/mips/mti-sead3/sead3-init.c
index a958cad6fff65a3408dedb0d834d70386e9c0a21..f95abaa1aa5db6a06b4d8b80696c99120ed48711 100644 (file)
--- a/arch/mips/mti-sead3/sead3-init.c
+++ b/arch/mips/mti-sead3/sead3-init.c
@@ -77,7 +77,6 @@ void __init prom_init(void)
        board_ejtag_handler_setup = mips_ejtag_setup;
 
        prom_init_cmdline();
-       prom_meminit();
 #ifdef CONFIG_EARLY_PRINTK
        if ((strstr(prom_getcmdline(), "console=ttyS0")) != NULL)
                prom_init_early_console(0);
@@ -89,3 +88,7 @@ void __init prom_init(void)
                strcat(prom_getcmdline(), " console=ttyS0,38400n8r");
 #endif
 }
+
+void prom_free_prom_memory(void)
+{
+}

diff --git a/arch/mips/mti-sead3/sead3-memory.c b/arch/mips/mti-sead3/sead3-memory.c
deleted file mode 100644 (file)
index da92441..0000000
--- a/arch/mips/mti-sead3/sead3-memory.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- */
-#include <linux/bootmem.h>
-
-#include <asm/bootinfo.h>
-#include <asm/sections.h>
-#include <asm/mips-boards/prom.h>
-
-enum yamon_memtypes {
-       yamon_dontuse,
-       yamon_prom,
-       yamon_free,
-};
-
-static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
-
-/* determined physical memory size, not overridden by command line args  */
-unsigned long physical_memsize = 0L;
-
-struct prom_pmemblock * __init prom_getmdesc(void)
-{
-       char *memsize_str, *ptr;
-       unsigned int memsize;
-       static char cmdline[COMMAND_LINE_SIZE] __initdata;
-       long val;
-       int tmp;
-
-       /* otherwise look in the environment */
-       memsize_str = prom_getenv("memsize");
-       if (!memsize_str) {
-               pr_warn("memsize not set in boot prom, set to default 32Mb\n");
-               physical_memsize = 0x02000000;
-       } else {
-               tmp = kstrtol(memsize_str, 0, &val);
-               physical_memsize = (unsigned long)val;
-       }
-
-#ifdef CONFIG_CPU_BIG_ENDIAN
-       /* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last
-          word of physical memory */
-       physical_memsize -= PAGE_SIZE;
-#endif
-
-       /* Check the command line for a memsize directive that overrides
-          the physical/default amount */
-       strcpy(cmdline, arcs_cmdline);
-       ptr = strstr(cmdline, "memsize=");
-       if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
-               ptr = strstr(ptr, " memsize=");
-
-       if (ptr)
-               memsize = memparse(ptr + 8, &ptr);
-       else
-               memsize = physical_memsize;
-
-       memset(mdesc, 0, sizeof(mdesc));
-
-       mdesc[0].type = yamon_dontuse;
-       mdesc[0].base = 0x00000000;
-       mdesc[0].size = 0x00001000;
-
-       mdesc[1].type = yamon_prom;
-       mdesc[1].base = 0x00001000;
-       mdesc[1].size = 0x000ef000;
-
-       /*
-        * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the
-        * south bridge and PCI access always forwarded to the ISA Bus and
-        * BIOSCS# is always generated.
-        * This mean that this area can't be used as DMA memory for PCI
-        * devices.
-        */
-       mdesc[2].type = yamon_dontuse;
-       mdesc[2].base = 0x000f0000;
-       mdesc[2].size = 0x00010000;
-
-       mdesc[3].type = yamon_dontuse;
-       mdesc[3].base = 0x00100000;
-       mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) -
-               mdesc[3].base;
-
-       mdesc[4].type = yamon_free;
-       mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end));
-       mdesc[4].size = memsize - mdesc[4].base;
-
-       return &mdesc[0];
-}
-
-static int __init prom_memtype_classify(unsigned int type)
-{
-       switch (type) {
-       case yamon_free:
-               return BOOT_MEM_RAM;
-       case yamon_prom:
-               return BOOT_MEM_ROM_DATA;
-       default:
-               return BOOT_MEM_RESERVED;
-       }
-}
-
-void __init prom_meminit(void)
-{
-       struct prom_pmemblock *p;
-
-       p = prom_getmdesc();
-
-       while (p->size) {
-               long type;
-               unsigned long base, size;
-
-               type = prom_memtype_classify(p->type);
-               base = p->base;
-               size = p->size;
-
-               add_memory_region(base, size, type);
-               p++;
-       }
-}
-
-void __init prom_free_prom_memory(void)
-{
-       unsigned long addr;
-       int i;
-
-       for (i = 0; i < boot_mem_map.nr_map; i++) {
-               if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
-                       continue;
-
-               addr = boot_mem_map.map[i].addr;
-               free_init_pages("prom memory",
-                               addr, addr + boot_mem_map.map[i].size);
-       }
-}

diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c
index 8ad46ad31b494e4205d9a277e994600894e3a356..f012fd164ceedc9e2aed9a94ebb30cc2bdc602c2 100644 (file)
--- a/arch/mips/mti-sead3/sead3-setup.c
+++ b/arch/mips/mti-sead3/sead3-setup.c
@@ -6,6 +6,12 @@
  * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
  */
 #include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
+#include <linux/bootmem.h>
+
+#include <asm/mips-boards/generic.h>
+#include <asm/prom.h>
 
 int coherentio;                /* 0 => no DMA cache coherency (may be set by user) */
 int hw_coherentio;     /* 0 => no HW DMA cache coherency (reflects real HW) */
@@ -17,4 +23,25 @@ const char *get_system_type(void)
 
 void __init plat_mem_setup(void)
 {
+       /*
+        * Load the builtin devicetree. This causes the chosen node to be
+        * parsed resulting in our memory appearing
+        */
+       __dt_setup_arch(&__dtb_start);
+}
+
+void __init device_tree_init(void)
+{
+       unsigned long base, size;
+
+       if (!initial_boot_params)
+               return;
+
+       base = virt_to_phys((void *)initial_boot_params);
+       size = be32_to_cpu(initial_boot_params->totalsize);
+
+       /* Before we do anything, lets reserve the dt blob */
+       reserve_bootmem(base, size, BOOTMEM_DEFAULT);
+
+       unflatten_device_tree();
 }

diff --git a/arch/mips/mti-sead3/sead3.dts b/arch/mips/mti-sead3/sead3.dts
new file mode 100644 (file)
index 0000000..658f437
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3.dts
@@ -0,0 +1,26 @@
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00001000;    // reserved
+/memreserve/ 0x00001000 0x000ef000;    // ROM data
+/memreserve/ 0x000f0000 0x004cc000;    // reserved
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "mti,sead-3";
+
+       cpus {
+               cpu@0 {
+                       compatible = "mti,mips14KEc", "mti,mips14Kc";
+               };
+       };
+
+       chosen {
+               bootargs = "console=ttyS1,38400 rootdelay=10 root=/dev/sda3";
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0x0 0x08000000>;
+       };
+};