ARM: OMAP2+: clean up OMAP clock Makefile sections
authorPaul Walmsley <paul@pwsan.com>
Wed, 12 Sep 2012 01:09:14 +0000 (19:09 -0600)
committerPaul Walmsley <paul@pwsan.com>
Wed, 12 Sep 2012 01:09:14 +0000 (19:09 -0600)
Clean up the OMAP clock code sections of the Makefile to save
some lines of diff.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
arch/arm/mach-omap2/Makefile

index e9de8d2931d4fd4b15c2cb640889fdcf9efc8c01..89e0dafc92c7276943c251356600be831fb53069 100644 (file)
@@ -6,9 +6,6 @@
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
         common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o
 
-clock-common                           = clock.o clock_common_data.o \
-                                         clkt_dpll.o clkt_clksel.o
-
 # INTCPS IP block support - XXX should be moved to drivers/
 obj-$(CONFIG_ARCH_OMAP2)               += irq.o
 obj-$(CONFIG_ARCH_OMAP3)               += irq.o
@@ -155,24 +152,22 @@ obj-$(CONFIG_SOC_OMAP5)                   += $(clockdomain-common)
 obj-$(CONFIG_SOC_OMAP5)                        += clockdomain44xx.o
 
 # Clock framework
-obj-$(CONFIG_ARCH_OMAP2)               += $(clock-common) clock2xxx.o
-obj-$(CONFIG_ARCH_OMAP2)               += clkt2xxx_sys.o
-obj-$(CONFIG_ARCH_OMAP2)               += clkt2xxx_dpllcore.o
+obj-y                                  += clock.o clock_common_data.o \
+                                          clkt_dpll.o clkt_clksel.o
+obj-$(CONFIG_ARCH_OMAP2)               += clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2)               += clkt2xxx_dpllcore.o clkt2xxx_sys.o
 obj-$(CONFIG_ARCH_OMAP2)               += clkt2xxx_virt_prcm_set.o
 obj-$(CONFIG_ARCH_OMAP2)               += clkt2xxx_apll.o clkt2xxx_osc.o
 obj-$(CONFIG_ARCH_OMAP2)               += clkt2xxx_dpll.o clkt_iclk.o
 obj-$(CONFIG_SOC_OMAP2420)             += clock2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)             += clock2430.o clock2430_data.o
-obj-$(CONFIG_ARCH_OMAP3)               += $(clock-common) clock3xxx.o
+obj-$(CONFIG_ARCH_OMAP3)               += clock3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)               += clock34xx.o clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3)               += clock3517.o clock36xx.o
+obj-$(CONFIG_ARCH_OMAP3)               += clock3517.o clock36xx.o clkt_iclk.o
 obj-$(CONFIG_ARCH_OMAP3)               += dpll3xxx.o clock3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3)               += clkt_iclk.o
-obj-$(CONFIG_ARCH_OMAP4)               += $(clock-common) clock44xx_data.o
+obj-$(CONFIG_ARCH_OMAP4)               += clock44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)               += dpll3xxx.o dpll44xx.o
-obj-$(CONFIG_SOC_AM33XX)               += $(clock-common) dpll3xxx.o
-obj-$(CONFIG_SOC_AM33XX)               += clock33xx_data.o
-obj-$(CONFIG_SOC_OMAP5)                        += $(clock-common)
+obj-$(CONFIG_SOC_AM33XX)               += dpll3xxx.o clock33xx_data.o
 obj-$(CONFIG_SOC_OMAP5)                        += dpll3xxx.o dpll44xx.o
 
 # OMAP2 clock rate set data (old "OPP" data)