*
* @chandef: defines the channel to use after the switch
* @beacon_csa: beacon data while performing the switch
- * @counter_offset_beacon: offset for the counter within the beacon (tail)
- * @counter_offset_presp: offset for the counter within the probe response
+ * @counter_offsets_beacon: offsets of the counters within the beacon (tail)
+ * @counter_offsets_presp: offsets of the counters within the probe response
+ * @n_counter_offsets_beacon: number of csa counters the beacon (tail)
+ * @n_counter_offsets_presp: number of csa counters in the probe response
* @beacon_after: beacon data to be used on the new channel
* @radar_required: whether radar detection is required on the new channel
* @block_tx: whether transmissions should be blocked while changing
struct cfg80211_csa_settings {
struct cfg80211_chan_def chandef;
struct cfg80211_beacon_data beacon_csa;
- u16 counter_offset_beacon, counter_offset_presp;
+ const u16 *counter_offsets_beacon;
+ const u16 *counter_offsets_presp;
+ unsigned int n_counter_offsets_beacon;
+ unsigned int n_counter_offsets_presp;
struct cfg80211_beacon_data beacon_after;
bool radar_required;
bool block_tx;
u16 max_ap_assoc_sta;
+ /*
+ * Number of supported csa_counters in beacons and probe responses.
+ * This value should be set if the driver wishes to limit the number of
+ * csa counters. Default (0) means infinite.
+ */
+ u8 max_num_csa_counters;
+
char priv[0] __aligned(NETDEV_ALIGN);
};
* operation).
* @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
* for the time while performing a channel switch.
- * @NL80211_ATTR_CSA_C_OFF_BEACON: Offset of the channel switch counter
- * field in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
- * @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter
- * field in the probe response (%NL80211_ATTR_PROBE_RESP).
+ * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel
+ * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
+ * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel
+ * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP).
*
* @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.
* As specified in the &enum nl80211_rxmgmt_flags.
*
* @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which
* should be updated when the frame is transmitted.
+ * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum
+ * supported number of csa counters.
*
* @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
* As specified in the &enum nl80211_tdls_peer_capability.
NL80211_ATTR_IFACE_SOCKET_OWNER,
NL80211_ATTR_CSA_C_OFFSETS_TX,
+ NL80211_ATTR_MAX_CSA_COUNTERS,
/* add attributes here, update the policy in nl80211.c */
break;
sdata->csa_counter_offset_beacon =
- params->counter_offset_beacon;
- sdata->csa_counter_offset_presp = params->counter_offset_presp;
+ params->counter_offsets_beacon[0];
+
+ if (params->n_counter_offsets_presp)
+ sdata->csa_counter_offset_presp =
+ params->counter_offsets_presp[0];
+ else
+ sdata->csa_counter_offset_presp = 0;
+
err = ieee80211_assign_beacon(sdata, ¶ms->beacon_csa);
if (err < 0) {
kfree(sdata->u.ap.next_beacon);
rdev->wiphy.rts_threshold = (u32) -1;
rdev->wiphy.coverage_class = 0;
+ rdev->wiphy.max_num_csa_counters = 1;
+
return &rdev->wiphy;
}
EXPORT_SYMBOL(wiphy_new);
[NL80211_ATTR_CH_SWITCH_COUNT] = { .type = NLA_U32 },
[NL80211_ATTR_CH_SWITCH_BLOCK_TX] = { .type = NLA_FLAG },
[NL80211_ATTR_CSA_IES] = { .type = NLA_NESTED },
- [NL80211_ATTR_CSA_C_OFF_BEACON] = { .type = NLA_U16 },
- [NL80211_ATTR_CSA_C_OFF_PRESP] = { .type = NLA_U16 },
+ [NL80211_ATTR_CSA_C_OFF_BEACON] = { .type = NLA_BINARY },
+ [NL80211_ATTR_CSA_C_OFF_PRESP] = { .type = NLA_BINARY },
[NL80211_ATTR_STA_SUPPORTED_CHANNELS] = { .type = NLA_BINARY },
[NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES] = { .type = NLA_BINARY },
[NL80211_ATTR_HANDLE_DFS] = { .type = NLA_FLAG },
}
nla_nest_end(msg, nested);
}
+ state->split_start++;
+ break;
+ case 12:
+ if (rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH &&
+ nla_put_u8(msg, NL80211_ATTR_MAX_CSA_COUNTERS,
+ rdev->wiphy.max_num_csa_counters))
+ goto nla_put_failure;
/* done */
state->split_start = 0;
u8 radar_detect_width = 0;
int err;
bool need_new_beacon = false;
+ int len, i;
if (!rdev->ops->channel_switch ||
!(rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH))
if (!csa_attrs[NL80211_ATTR_CSA_C_OFF_BEACON])
return -EINVAL;
- params.counter_offset_beacon =
- nla_get_u16(csa_attrs[NL80211_ATTR_CSA_C_OFF_BEACON]);
- if (params.counter_offset_beacon >= params.beacon_csa.tail_len)
+ len = nla_len(csa_attrs[NL80211_ATTR_CSA_C_OFF_BEACON]);
+ if (!len || (len % sizeof(u16)))
return -EINVAL;
- /* sanity check - counters should be the same */
- if (params.beacon_csa.tail[params.counter_offset_beacon] !=
- params.count)
+ params.n_counter_offsets_beacon = len / sizeof(u16);
+ if (rdev->wiphy.max_num_csa_counters &&
+ (params.n_counter_offsets_beacon >
+ rdev->wiphy.max_num_csa_counters))
return -EINVAL;
+ params.counter_offsets_beacon =
+ nla_data(csa_attrs[NL80211_ATTR_CSA_C_OFF_BEACON]);
+
+ /* sanity checks - counters should fit and be the same */
+ for (i = 0; i < params.n_counter_offsets_beacon; i++) {
+ u16 offset = params.counter_offsets_beacon[i];
+
+ if (offset >= params.beacon_csa.tail_len)
+ return -EINVAL;
+
+ if (params.beacon_csa.tail[offset] != params.count)
+ return -EINVAL;
+ }
+
if (csa_attrs[NL80211_ATTR_CSA_C_OFF_PRESP]) {
- params.counter_offset_presp =
- nla_get_u16(csa_attrs[NL80211_ATTR_CSA_C_OFF_PRESP]);
- if (params.counter_offset_presp >=
- params.beacon_csa.probe_resp_len)
+ len = nla_len(csa_attrs[NL80211_ATTR_CSA_C_OFF_PRESP]);
+ if (!len || (len % sizeof(u16)))
return -EINVAL;
- if (params.beacon_csa.probe_resp[params.counter_offset_presp] !=
- params.count)
+ params.n_counter_offsets_presp = len / sizeof(u16);
+ if (rdev->wiphy.max_num_csa_counters &&
+ (params.n_counter_offsets_beacon >
+ rdev->wiphy.max_num_csa_counters))
return -EINVAL;
+
+ params.counter_offsets_presp =
+ nla_data(csa_attrs[NL80211_ATTR_CSA_C_OFF_PRESP]);
+
+ /* sanity checks - counters should fit and be the same */
+ for (i = 0; i < params.n_counter_offsets_presp; i++) {
+ u16 offset = params.counter_offsets_presp[i];
+
+ if (offset >= params.beacon_csa.probe_resp_len)
+ return -EINVAL;
+
+ if (params.beacon_csa.probe_resp[offset] !=
+ params.count)
+ return -EINVAL;
+ }
}
skip_beacons:
WIPHY_ENTRY
NETDEV_ENTRY
CHAN_DEF_ENTRY
- __field(u16, counter_offset_beacon)
- __field(u16, counter_offset_presp)
__field(bool, radar_required)
__field(bool, block_tx)
__field(u8, count)
+ __dynamic_array(u16, bcn_ofs, params->n_counter_offsets_beacon)
+ __dynamic_array(u16, pres_ofs, params->n_counter_offsets_presp)
),
TP_fast_assign(
WIPHY_ASSIGN;
NETDEV_ASSIGN;
CHAN_DEF_ASSIGN(¶ms->chandef);
- __entry->counter_offset_beacon = params->counter_offset_beacon;
- __entry->counter_offset_presp = params->counter_offset_presp;
__entry->radar_required = params->radar_required;
__entry->block_tx = params->block_tx;
__entry->count = params->count;
+ memcpy(__get_dynamic_array(bcn_ofs),
+ params->counter_offsets_beacon,
+ params->n_counter_offsets_beacon * sizeof(u16));
+
+ /* probe response offsets are optional */
+ if (params->n_counter_offsets_presp)
+ memcpy(__get_dynamic_array(pres_ofs),
+ params->counter_offsets_presp,
+ params->n_counter_offsets_presp * sizeof(u16));
),
TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", " CHAN_DEF_PR_FMT
- ", block_tx: %d, count: %u, radar_required: %d"
- ", counter offsets (beacon/presp): %u/%u",
+ ", block_tx: %d, count: %u, radar_required: %d",
WIPHY_PR_ARG, NETDEV_PR_ARG, CHAN_DEF_PR_ARG,
- __entry->block_tx, __entry->count, __entry->radar_required,
- __entry->counter_offset_beacon,
- __entry->counter_offset_presp)
+ __entry->block_tx, __entry->count, __entry->radar_required)
);
TRACE_EVENT(rdev_set_qos_map,