This patch will make an early remapping of the PRCMU, to be
used when setting up the clocks, that will call down into parts
of the PRCMU driver before it is probed.
Going forward this will be removed like this:
- The mailbox subsystem need to be merged.
http://marc.info/?l=linux-kernel&m=
136314559201983&w=2
- At this point the PRCMU clock code can be moved over to the
ux500 clock driver in drivers/clk/ux500/* and maintained
there in a decentralized manner.
- This early initcall and PRCMU base parameters become part of
the ux500_clk_init() call instead.
Cc: Suman Anna <s-anna@ti.com>
Cc: Loic Pallardy <loic.pallardy@st.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
#include <linux/clksrc-dbx500-prcmu.h>
#include <linux/sys_soc.h>
#include <linux/err.h>
* Init clocks here so that they are available for system timer
* initialization.
*/
- if (cpu_is_u8500_family() || cpu_is_u9540())
- db8500_prcmu_early_init();
-
- if (cpu_is_u8500_family() || cpu_is_u9540())
+ if (cpu_is_u8500_family()) {
+ prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
+ u8500_clk_init();
+ } else if (cpu_is_u9540()) {
+ prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
u8500_clk_init();
- else if (cpu_is_u8540())
+ } else if (cpu_is_u8540()) {
+ prcmu_early_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1);
u8540_clk_init();
+ }
}
void __init ux500_init_late(void)
}
}
-void __init db8500_prcmu_early_init(void)
+void __init db8500_prcmu_early_init(u32 phy_base, u32 size)
{
+ /*
+ * This is a temporary remap to bring up the clocks. It is
+ * subsequently replaces with a real remap. After the merge of
+ * the mailbox subsystem all of this early code goes away, and the
+ * clock driver can probe independently. An early initcall will
+ * still be needed, but it can be diverted into drivers/clk/ux500.
+ */
+ prcmu_base = ioremap(phy_base, size);
+ if (!prcmu_base)
+ pr_err("%s: ioremap() of prcmu registers failed!\n", __func__);
+
spin_lock_init(&mb0_transfer.lock);
spin_lock_init(&mb0_transfer.dbb_irqs_lock);
mutex_init(&mb0_transfer.ac_wake_lock);
#ifdef CONFIG_MFD_DB8500_PRCMU
-void db8500_prcmu_early_init(void);
+void db8500_prcmu_early_init(u32 phy_base, u32 size);
int prcmu_set_rc_a2p(enum romcode_write);
enum romcode_read prcmu_get_rc_p2a(void);
enum ap_pwrst prcmu_get_xp70_current_state(void);
#else /* !CONFIG_MFD_DB8500_PRCMU */
-static inline void db8500_prcmu_early_init(void) {}
+static inline void db8500_prcmu_early_init(u32 phy_base, u32 size) {}
static inline int prcmu_set_rc_a2p(enum romcode_write code)
{
#if defined(CONFIG_UX500_SOC_DB8500)
-static inline void __init prcmu_early_init(void)
+static inline void prcmu_early_init(u32 phy_base, u32 size)
{
- return db8500_prcmu_early_init();
+ return db8500_prcmu_early_init(phy_base, size);
}
static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
}
#else
-static inline void __init prcmu_early_init(void) {}
+static inline void prcmu_early_init(u32 phy_base, u32 size) {}
static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
bool keep_ap_pll)