AT91: Correct configuration define value

The MTD nand driver for Atmel chips is atmel_nand and not at91_nand anymore.
Change wrong configuration variables that were remaining.

Reported-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
index 5daff277f53e0deaccfc8665d75613440ba7bbfa..46651623f20885e3739deb55e0be6b8885f9c187 100644 (file)
--- a/arch/arm/mach-at91/board-at572d940hf_ek.c
+++ b/arch/arm/mach-at91/board-at572d940hf_ek.c
@@ -216,7 +216,7 @@ static struct atmel_nand_data __initdata eb_nand_data = {
 /*     .rdy_pin        = AT91_PIN_PC16, */
        .enable_pin     = AT91_PIN_PA15,
        .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
        .bus_width_16   = 1,
 #else
        .bus_width_16   = 0,

diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index f9bf45e65cb296eb608e2ec0305a9f5a4b9410b2..ae0e0843e5f550f2a94b900a251b1e3052654dda 100644 (file)
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -135,7 +135,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
        .rdy_pin        = AT91_PIN_PC8,
        .enable_pin     = AT91_PIN_PC14,
        .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
        .bus_width_16   = 1,
 #else
        .bus_width_16   = 0,