#include <asm/mpc52xx.h>
#include <asm/time.h>
-#include <sysdev/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/bestcomm_priv.h>
-#include <sysdev/bestcomm/gen_bd.h>
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/gen_bd.h>
MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
MODULE_DESCRIPTION("MPC5200 LocalPlus FIFO device driver");
Uses information from the OF or flattened device tree to instantiate
platform devices for direct mapped RTC chips like the DS1742 or DS1743.
-source "arch/powerpc/sysdev/bestcomm/Kconfig"
-
config SIMPLE_GPIO
bool "Support for simple, memory-mapped GPIO controllers"
depends on PPC
obj-$(CONFIG_FSL_RIO) += fsl_rio.o fsl_rmu.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
-obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
mv64x60-$(CONFIG_PCI) += mv64x60_pci.o
obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
mv64x60_udbg.o
+++ /dev/null
-#
-# Kconfig options for Bestcomm
-#
-
-config PPC_BESTCOMM
- tristate "Bestcomm DMA engine support"
- depends on PPC_MPC52xx
- default n
- select PPC_LIB_RHEAP
- help
- BestComm is the name of the communication coprocessor found
- on the Freescale MPC5200 family of processor. Its usage is
- optional for some drivers (like ATA), but required for
- others (like FEC).
-
- If you want to use drivers that require DMA operations,
- answer Y or M. Otherwise say N.
-
-config PPC_BESTCOMM_ATA
- tristate
- depends on PPC_BESTCOMM
- help
- This option enables the support for the ATA task.
-
-config PPC_BESTCOMM_FEC
- tristate
- depends on PPC_BESTCOMM
- help
- This option enables the support for the FEC tasks.
-
-config PPC_BESTCOMM_GEN_BD
- tristate
- depends on PPC_BESTCOMM
- help
- This option enables the support for the GenBD tasks.
-
+++ /dev/null
-#
-# Makefile for BestComm & co
-#
-
-bestcomm-core-objs := bestcomm.o sram.o
-bestcomm-ata-objs := ata.o bcom_ata_task.o
-bestcomm-fec-objs := fec.o bcom_fec_rx_task.o bcom_fec_tx_task.o
-bestcomm-gen-bd-objs := gen_bd.o bcom_gen_bd_rx_task.o bcom_gen_bd_tx_task.o
-
-obj-$(CONFIG_PPC_BESTCOMM) += bestcomm-core.o
-obj-$(CONFIG_PPC_BESTCOMM_ATA) += bestcomm-ata.o
-obj-$(CONFIG_PPC_BESTCOMM_FEC) += bestcomm-fec.o
-obj-$(CONFIG_PPC_BESTCOMM_GEN_BD) += bestcomm-gen-bd.o
-
+++ /dev/null
-/*
- * Bestcomm ATA task driver
- *
- *
- * Patterned after bestcomm/fec.c by Dale Farnsworth <dfarnsworth@mvista.com>
- * 2003-2004 (c) MontaVista, Software, Inc.
- *
- * Copyright (C) 2006-2007 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2006 Freescale - John Rigby
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <asm/io.h>
-
-#include "bestcomm.h"
-#include "bestcomm_priv.h"
-#include "ata.h"
-
-
-/* ======================================================================== */
-/* Task image/var/inc */
-/* ======================================================================== */
-
-/* ata task image */
-extern u32 bcom_ata_task[];
-
-/* ata task vars that need to be set before enabling the task */
-struct bcom_ata_var {
- u32 enable; /* (u16*) address of task's control register */
- u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */
- u32 bd_last; /* (struct bcom_bd*) end of ring buffer */
- u32 bd_start; /* (struct bcom_bd*) current bd */
- u32 buffer_size; /* size of receive buffer */
-};
-
-/* ata task incs that need to be set before enabling the task */
-struct bcom_ata_inc {
- u16 pad0;
- s16 incr_bytes;
- u16 pad1;
- s16 incr_dst;
- u16 pad2;
- s16 incr_src;
-};
-
-
-/* ======================================================================== */
-/* Task support code */
-/* ======================================================================== */
-
-struct bcom_task *
-bcom_ata_init(int queue_len, int maxbufsize)
-{
- struct bcom_task *tsk;
- struct bcom_ata_var *var;
- struct bcom_ata_inc *inc;
-
- /* Prefetch breaks ATA DMA. Turn it off for ATA DMA */
- bcom_disable_prefetch();
-
- tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_ata_bd), 0);
- if (!tsk)
- return NULL;
-
- tsk->flags = BCOM_FLAGS_NONE;
-
- bcom_ata_reset_bd(tsk);
-
- var = (struct bcom_ata_var *) bcom_task_var(tsk->tasknum);
- inc = (struct bcom_ata_inc *) bcom_task_inc(tsk->tasknum);
-
- if (bcom_load_image(tsk->tasknum, bcom_ata_task)) {
- bcom_task_free(tsk);
- return NULL;
- }
-
- var->enable = bcom_eng->regs_base +
- offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]);
- var->bd_base = tsk->bd_pa;
- var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size);
- var->bd_start = tsk->bd_pa;
- var->buffer_size = maxbufsize;
-
- /* Configure some stuff */
- bcom_set_task_pragma(tsk->tasknum, BCOM_ATA_PRAGMA);
- bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum);
-
- out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_ATA_RX], BCOM_IPR_ATA_RX);
- out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_ATA_TX], BCOM_IPR_ATA_TX);
-
- out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum); /* Clear ints */
-
- return tsk;
-}
-EXPORT_SYMBOL_GPL(bcom_ata_init);
-
-void bcom_ata_rx_prepare(struct bcom_task *tsk)
-{
- struct bcom_ata_inc *inc;
-
- inc = (struct bcom_ata_inc *) bcom_task_inc(tsk->tasknum);
-
- inc->incr_bytes = -(s16)sizeof(u32);
- inc->incr_src = 0;
- inc->incr_dst = sizeof(u32);
-
- bcom_set_initiator(tsk->tasknum, BCOM_INITIATOR_ATA_RX);
-}
-EXPORT_SYMBOL_GPL(bcom_ata_rx_prepare);
-
-void bcom_ata_tx_prepare(struct bcom_task *tsk)
-{
- struct bcom_ata_inc *inc;
-
- inc = (struct bcom_ata_inc *) bcom_task_inc(tsk->tasknum);
-
- inc->incr_bytes = -(s16)sizeof(u32);
- inc->incr_src = sizeof(u32);
- inc->incr_dst = 0;
-
- bcom_set_initiator(tsk->tasknum, BCOM_INITIATOR_ATA_TX);
-}
-EXPORT_SYMBOL_GPL(bcom_ata_tx_prepare);
-
-void bcom_ata_reset_bd(struct bcom_task *tsk)
-{
- struct bcom_ata_var *var;
-
- /* Reset all BD */
- memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size);
-
- tsk->index = 0;
- tsk->outdex = 0;
-
- var = (struct bcom_ata_var *) bcom_task_var(tsk->tasknum);
- var->bd_start = var->bd_base;
-}
-EXPORT_SYMBOL_GPL(bcom_ata_reset_bd);
-
-void bcom_ata_release(struct bcom_task *tsk)
-{
- /* Nothing special for the ATA tasks */
- bcom_task_free(tsk);
-}
-EXPORT_SYMBOL_GPL(bcom_ata_release);
-
-
-MODULE_DESCRIPTION("BestComm ATA task driver");
-MODULE_AUTHOR("John Rigby");
-MODULE_LICENSE("GPL v2");
-
+++ /dev/null
-/*
- * Header for Bestcomm ATA task driver
- *
- *
- * Copyright (C) 2006 Freescale - John Rigby
- * Copyright (C) 2006 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __BESTCOMM_ATA_H__
-#define __BESTCOMM_ATA_H__
-
-
-struct bcom_ata_bd {
- u32 status;
- u32 src_pa;
- u32 dst_pa;
-};
-
-extern struct bcom_task * bcom_ata_init(int queue_len, int maxbufsize);
-extern void bcom_ata_rx_prepare(struct bcom_task *tsk);
-extern void bcom_ata_tx_prepare(struct bcom_task *tsk);
-extern void bcom_ata_reset_bd(struct bcom_task *tsk);
-extern void bcom_ata_release(struct bcom_task *tsk);
-
-#endif /* __BESTCOMM_ATA_H__ */
-
+++ /dev/null
-/*
- * Bestcomm ATA task microcode
- *
- * Copyright (c) 2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Created based on bestcom/code_dma/image_rtos1/dma_image.hex
- */
-
-#include <asm/types.h>
-
-/*
- * The header consists of the following fields:
- * u32 magic;
- * u8 desc_size;
- * u8 var_size;
- * u8 inc_size;
- * u8 first_var;
- * u8 reserved[8];
- *
- * The size fields contain the number of 32-bit words.
- */
-
-u32 bcom_ata_task[] = {
- /* header */
- 0x4243544b,
- 0x0e060709,
- 0x00000000,
- 0x00000000,
-
- /* Task descriptors */
- 0x8198009b, /* LCD: idx0 = var3; idx0 <= var2; idx0 += inc3 */
- 0x13e00c08, /* DRD1A: var3 = var1; FN=0 MORE init=31 WS=0 RS=0 */
- 0xb8000264, /* LCD: idx1 = *idx0, idx2 = var0; idx1 < var9; idx1 += inc4, idx2 += inc4 */
- 0x10000f00, /* DRD1A: var3 = idx0; FN=0 MORE init=0 WS=0 RS=0 */
- 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */
- 0x0c8cfc8a, /* DRD2B1: *idx2 = EU3(); EU3(*idx2,var10) */
- 0xd8988240, /* LCDEXT: idx1 = idx1; idx1 > var9; idx1 += inc0 */
- 0xf845e011, /* LCDEXT: idx2 = *(idx0 + var00000015); ; idx2 += inc2 */
- 0xb845e00a, /* LCD: idx3 = *(idx0 + var00000019); ; idx3 += inc1 */
- 0x0bfecf90, /* DRD1A: *idx3 = *idx2; FN=0 TFD init=31 WS=3 RS=3 */
- 0x9898802d, /* LCD: idx1 = idx1; idx1 once var0; idx1 += inc5 */
- 0x64000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 INT EXT init=0 WS=0 RS=0 */
- 0x0c0cf849, /* DRD2B1: *idx0 = EU3(); EU3(idx1,var9) */
- 0x000001f8, /* NOP */
-
- /* VAR[9]-VAR[14] */
- 0x40000000,
- 0x7fff7fff,
- 0x00000000,
- 0x00000000,
- 0x00000000,
- 0x00000000,
-
- /* INC[0]-INC[6] */
- 0x40000000,
- 0xe0000000,
- 0xe0000000,
- 0xa000000c,
- 0x20000000,
- 0x00000000,
- 0x00000000,
-};
-
+++ /dev/null
-/*
- * Bestcomm FEC RX task microcode
- *
- * Copyright (c) 2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Automatically created based on BestCommAPI-2.2/code_dma/image_rtos1/dma_image.hex
- * on Tue Mar 22 11:19:38 2005 GMT
- */
-
-#include <asm/types.h>
-
-/*
- * The header consists of the following fields:
- * u32 magic;
- * u8 desc_size;
- * u8 var_size;
- * u8 inc_size;
- * u8 first_var;
- * u8 reserved[8];
- *
- * The size fields contain the number of 32-bit words.
- */
-
-u32 bcom_fec_rx_task[] = {
- /* header */
- 0x4243544b,
- 0x18060709,
- 0x00000000,
- 0x00000000,
-
- /* Task descriptors */
- 0x808220e3, /* LCD: idx0 = var1, idx1 = var4; idx1 <= var3; idx0 += inc4, idx1 += inc3 */
- 0x10601010, /* DRD1A: var4 = var2; FN=0 MORE init=3 WS=0 RS=0 */
- 0xb8800264, /* LCD: idx2 = *idx1, idx3 = var0; idx2 < var9; idx2 += inc4, idx3 += inc4 */
- 0x10001308, /* DRD1A: var4 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
- 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */
- 0x0cccfcca, /* DRD2B1: *idx3 = EU3(); EU3(*idx3,var10) */
- 0x80004000, /* LCDEXT: idx2 = 0x00000000; ; */
- 0xb8c58029, /* LCD: idx3 = *(idx1 + var00000015); idx3 once var0; idx3 += inc5 */
- 0x60000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=0 RS=0 */
- 0x088cf8cc, /* DRD2B1: idx2 = EU3(); EU3(idx3,var12) */
- 0x991982f2, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var11; idx2 += inc6, idx3 += inc2 */
- 0x006acf80, /* DRD1A: *idx3 = *idx0; FN=0 init=3 WS=1 RS=1 */
- 0x80004000, /* LCDEXT: idx2 = 0x00000000; ; */
- 0x9999802d, /* LCD: idx3 = idx3; idx3 once var0; idx3 += inc5 */
- 0x70000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */
- 0x034cfc4e, /* DRD2B1: var13 = EU3(); EU3(*idx1,var14) */
- 0x00008868, /* DRD1A: idx2 = var13; FN=0 init=0 WS=0 RS=0 */
- 0x99198341, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var13; idx2 += inc0, idx3 += inc1 */
- 0x007ecf80, /* DRD1A: *idx3 = *idx0; FN=0 init=3 WS=3 RS=3 */
- 0x99198272, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var9; idx2 += inc6, idx3 += inc2 */
- 0x046acf80, /* DRD1A: *idx3 = *idx0; FN=0 INT init=3 WS=1 RS=1 */
- 0x9819002d, /* LCD: idx2 = idx0; idx2 once var0; idx2 += inc5 */
- 0x0060c790, /* DRD1A: *idx1 = *idx2; FN=0 init=3 WS=0 RS=0 */
- 0x000001f8, /* NOP */
-
- /* VAR[9]-VAR[14] */
- 0x40000000,
- 0x7fff7fff,
- 0x00000000,
- 0x00000003,
- 0x40000008,
- 0x43ffffff,
-
- /* INC[0]-INC[6] */
- 0x40000000,
- 0xe0000000,
- 0xe0000000,
- 0xa0000008,
- 0x20000000,
- 0x00000000,
- 0x4000ffff,
-};
-
+++ /dev/null
-/*
- * Bestcomm FEC TX task microcode
- *
- * Copyright (c) 2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Automatically created based on BestCommAPI-2.2/code_dma/image_rtos1/dma_image.hex
- * on Tue Mar 22 11:19:29 2005 GMT
- */
-
-#include <asm/types.h>
-
-/*
- * The header consists of the following fields:
- * u32 magic;
- * u8 desc_size;
- * u8 var_size;
- * u8 inc_size;
- * u8 first_var;
- * u8 reserved[8];
- *
- * The size fields contain the number of 32-bit words.
- */
-
-u32 bcom_fec_tx_task[] = {
- /* header */
- 0x4243544b,
- 0x2407070d,
- 0x00000000,
- 0x00000000,
-
- /* Task descriptors */
- 0x8018001b, /* LCD: idx0 = var0; idx0 <= var0; idx0 += inc3 */
- 0x60000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */
- 0x01ccfc0d, /* DRD2B1: var7 = EU3(); EU3(*idx0,var13) */
- 0x8082a123, /* LCD: idx0 = var1, idx1 = var5; idx1 <= var4; idx0 += inc4, idx1 += inc3 */
- 0x10801418, /* DRD1A: var5 = var3; FN=0 MORE init=4 WS=0 RS=0 */
- 0xf88103a4, /* LCDEXT: idx2 = *idx1, idx3 = var2; idx2 < var14; idx2 += inc4, idx3 += inc4 */
- 0x801a6024, /* LCD: idx4 = var0; ; idx4 += inc4 */
- 0x10001708, /* DRD1A: var5 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
- 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */
- 0x0cccfccf, /* DRD2B1: *idx3 = EU3(); EU3(*idx3,var15) */
- 0x991a002c, /* LCD: idx2 = idx2, idx3 = idx4; idx2 once var0; idx2 += inc5, idx3 += inc4 */
- 0x70000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */
- 0x024cfc4d, /* DRD2B1: var9 = EU3(); EU3(*idx1,var13) */
- 0x60000003, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */
- 0x0cccf247, /* DRD2B1: *idx3 = EU3(); EU3(var9,var7) */
- 0x80004000, /* LCDEXT: idx2 = 0x00000000; ; */
- 0xb8c80029, /* LCD: idx3 = *(idx1 + var0000001a); idx3 once var0; idx3 += inc5 */
- 0x70000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */
- 0x088cf8d1, /* DRD2B1: idx2 = EU3(); EU3(idx3,var17) */
- 0x00002f10, /* DRD1A: var11 = idx2; FN=0 init=0 WS=0 RS=0 */
- 0x99198432, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var16; idx2 += inc6, idx3 += inc2 */
- 0x008ac398, /* DRD1A: *idx0 = *idx3; FN=0 init=4 WS=1 RS=1 */
- 0x80004000, /* LCDEXT: idx2 = 0x00000000; ; */
- 0x9999802d, /* LCD: idx3 = idx3; idx3 once var0; idx3 += inc5 */
- 0x70000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */
- 0x048cfc53, /* DRD2B1: var18 = EU3(); EU3(*idx1,var19) */
- 0x60000008, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=8 EXT init=0 WS=0 RS=0 */
- 0x088cf48b, /* DRD2B1: idx2 = EU3(); EU3(var18,var11) */
- 0x99198481, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var18; idx2 += inc0, idx3 += inc1 */
- 0x009ec398, /* DRD1A: *idx0 = *idx3; FN=0 init=4 WS=3 RS=3 */
- 0x991983b2, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var14; idx2 += inc6, idx3 += inc2 */
- 0x088ac398, /* DRD1A: *idx0 = *idx3; FN=0 TFD init=4 WS=1 RS=1 */
- 0x9919002d, /* LCD: idx2 = idx2; idx2 once var0; idx2 += inc5 */
- 0x60000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */
- 0x0c4cf88e, /* DRD2B1: *idx1 = EU3(); EU3(idx2,var14) */
- 0x000001f8, /* NOP */
-
- /* VAR[13]-VAR[19] */
- 0x0c000000,
- 0x40000000,
- 0x7fff7fff,
- 0x00000000,
- 0x00000003,
- 0x40000004,
- 0x43ffffff,
-
- /* INC[0]-INC[6] */
- 0x40000000,
- 0xe0000000,
- 0xe0000000,
- 0xa0000008,
- 0x20000000,
- 0x00000000,
- 0x4000ffff,
-};
-
+++ /dev/null
-/*
- * Bestcomm GenBD RX task microcode
- *
- * Copyright (C) 2006 AppSpec Computer Technologies Corp.
- * Jeff Gibbons <jeff.gibbons@appspec.com>
- * Copyright (c) 2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Based on BestCommAPI-2.2/code_dma/image_rtos1/dma_image.hex
- * on Tue Mar 4 10:14:12 2006 GMT
- *
- */
-
-#include <asm/types.h>
-
-/*
- * The header consists of the following fields:
- * u32 magic;
- * u8 desc_size;
- * u8 var_size;
- * u8 inc_size;
- * u8 first_var;
- * u8 reserved[8];
- *
- * The size fields contain the number of 32-bit words.
- */
-
-u32 bcom_gen_bd_rx_task[] = {
- /* header */
- 0x4243544b,
- 0x0d020409,
- 0x00000000,
- 0x00000000,
-
- /* Task descriptors */
- 0x808220da, /* LCD: idx0 = var1, idx1 = var4; idx1 <= var3; idx0 += inc3, idx1 += inc2 */
- 0x13e01010, /* DRD1A: var4 = var2; FN=0 MORE init=31 WS=0 RS=0 */
- 0xb880025b, /* LCD: idx2 = *idx1, idx3 = var0; idx2 < var9; idx2 += inc3, idx3 += inc3 */
- 0x10001308, /* DRD1A: var4 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
- 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */
- 0x0cccfcca, /* DRD2B1: *idx3 = EU3(); EU3(*idx3,var10) */
- 0xd9190240, /* LCDEXT: idx2 = idx2; idx2 > var9; idx2 += inc0 */
- 0xb8c5e009, /* LCD: idx3 = *(idx1 + var00000015); ; idx3 += inc1 */
- 0x07fecf80, /* DRD1A: *idx3 = *idx0; FN=0 INT init=31 WS=3 RS=3 */
- 0x99190024, /* LCD: idx2 = idx2; idx2 once var0; idx2 += inc4 */
- 0x60000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */
- 0x0c4cf889, /* DRD2B1: *idx1 = EU3(); EU3(idx2,var9) */
- 0x000001f8, /* NOP */
-
- /* VAR[9]-VAR[10] */
- 0x40000000,
- 0x7fff7fff,
-
- /* INC[0]-INC[3] */
- 0x40000000,
- 0xe0000000,
- 0xa0000008,
- 0x20000000,
-};
-
+++ /dev/null
-/*
- * Bestcomm GenBD TX task microcode
- *
- * Copyright (C) 2006 AppSpec Computer Technologies Corp.
- * Jeff Gibbons <jeff.gibbons@appspec.com>
- * Copyright (c) 2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Based on BestCommAPI-2.2/code_dma/image_rtos1/dma_image.hex
- * on Tue Mar 4 10:14:12 2006 GMT
- *
- */
-
-#include <asm/types.h>
-
-/*
- * The header consists of the following fields:
- * u32 magic;
- * u8 desc_size;
- * u8 var_size;
- * u8 inc_size;
- * u8 first_var;
- * u8 reserved[8];
- *
- * The size fields contain the number of 32-bit words.
- */
-
-u32 bcom_gen_bd_tx_task[] = {
- /* header */
- 0x4243544b,
- 0x0f040609,
- 0x00000000,
- 0x00000000,
-
- /* Task descriptors */
- 0x800220e3, /* LCD: idx0 = var0, idx1 = var4; idx1 <= var3; idx0 += inc4, idx1 += inc3 */
- 0x13e01010, /* DRD1A: var4 = var2; FN=0 MORE init=31 WS=0 RS=0 */
- 0xb8808264, /* LCD: idx2 = *idx1, idx3 = var1; idx2 < var9; idx2 += inc4, idx3 += inc4 */
- 0x10001308, /* DRD1A: var4 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
- 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */
- 0x0cccfcca, /* DRD2B1: *idx3 = EU3(); EU3(*idx3,var10) */
- 0xd9190300, /* LCDEXT: idx2 = idx2; idx2 > var12; idx2 += inc0 */
- 0xb8c5e009, /* LCD: idx3 = *(idx1 + var00000015); ; idx3 += inc1 */
- 0x03fec398, /* DRD1A: *idx0 = *idx3; FN=0 init=31 WS=3 RS=3 */
- 0x9919826a, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var9; idx2 += inc5, idx3 += inc2 */
- 0x0feac398, /* DRD1A: *idx0 = *idx3; FN=0 TFD INT init=31 WS=1 RS=1 */
- 0x99190036, /* LCD: idx2 = idx2; idx2 once var0; idx2 += inc6 */
- 0x60000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */
- 0x0c4cf889, /* DRD2B1: *idx1 = EU3(); EU3(idx2,var9) */
- 0x000001f8, /* NOP */
-
- /* VAR[9]-VAR[12] */
- 0x40000000,
- 0x7fff7fff,
- 0x00000000,
- 0x40000004,
-
- /* INC[0]-INC[5] */
- 0x40000000,
- 0xe0000000,
- 0xe0000000,
- 0xa0000008,
- 0x20000000,
- 0x4000ffff,
-};
-
+++ /dev/null
-/*
- * Driver for MPC52xx processor BestComm peripheral controller
- *
- *
- * Copyright (C) 2006-2007 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2005 Varma Electronics Oy,
- * ( by Andrey Volkov <avolkov@varma-el.com> )
- * Copyright (C) 2003-2004 MontaVista, Software, Inc.
- * ( by Dale Farnsworth <dfarnsworth@mvista.com> )
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/of_platform.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mpc52xx.h>
-
-#include "sram.h"
-#include "bestcomm_priv.h"
-#include "bestcomm.h"
-
-#define DRIVER_NAME "bestcomm-core"
-
-/* MPC5200 device tree match tables */
-static struct of_device_id mpc52xx_sram_ids[] __devinitdata = {
- { .compatible = "fsl,mpc5200-sram", },
- { .compatible = "mpc5200-sram", },
- {}
-};
-
-
-struct bcom_engine *bcom_eng = NULL;
-EXPORT_SYMBOL_GPL(bcom_eng); /* needed for inline functions */
-
-/* ======================================================================== */
-/* Public and private API */
-/* ======================================================================== */
-
-/* Private API */
-
-struct bcom_task *
-bcom_task_alloc(int bd_count, int bd_size, int priv_size)
-{
- int i, tasknum = -1;
- struct bcom_task *tsk;
-
- /* Don't try to do anything if bestcomm init failed */
- if (!bcom_eng)
- return NULL;
-
- /* Get and reserve a task num */
- spin_lock(&bcom_eng->lock);
-
- for (i=0; i<BCOM_MAX_TASKS; i++)
- if (!bcom_eng->tdt[i].stop) { /* we use stop as a marker */
- bcom_eng->tdt[i].stop = 0xfffffffful; /* dummy addr */
- tasknum = i;
- break;
- }
-
- spin_unlock(&bcom_eng->lock);
-
- if (tasknum < 0)
- return NULL;
-
- /* Allocate our structure */
- tsk = kzalloc(sizeof(struct bcom_task) + priv_size, GFP_KERNEL);
- if (!tsk)
- goto error;
-
- tsk->tasknum = tasknum;
- if (priv_size)
- tsk->priv = (void*)tsk + sizeof(struct bcom_task);
-
- /* Get IRQ of that task */
- tsk->irq = irq_of_parse_and_map(bcom_eng->ofnode, tsk->tasknum);
- if (tsk->irq == NO_IRQ)
- goto error;
-
- /* Init the BDs, if needed */
- if (bd_count) {
- tsk->cookie = kmalloc(sizeof(void*) * bd_count, GFP_KERNEL);
- if (!tsk->cookie)
- goto error;
-
- tsk->bd = bcom_sram_alloc(bd_count * bd_size, 4, &tsk->bd_pa);
- if (!tsk->bd)
- goto error;
- memset(tsk->bd, 0x00, bd_count * bd_size);
-
- tsk->num_bd = bd_count;
- tsk->bd_size = bd_size;
- }
-
- return tsk;
-
-error:
- if (tsk) {
- if (tsk->irq != NO_IRQ)
- irq_dispose_mapping(tsk->irq);
- bcom_sram_free(tsk->bd);
- kfree(tsk->cookie);
- kfree(tsk);
- }
-
- bcom_eng->tdt[tasknum].stop = 0;
-
- return NULL;
-}
-EXPORT_SYMBOL_GPL(bcom_task_alloc);
-
-void
-bcom_task_free(struct bcom_task *tsk)
-{
- /* Stop the task */
- bcom_disable_task(tsk->tasknum);
-
- /* Clear TDT */
- bcom_eng->tdt[tsk->tasknum].start = 0;
- bcom_eng->tdt[tsk->tasknum].stop = 0;
-
- /* Free everything */
- irq_dispose_mapping(tsk->irq);
- bcom_sram_free(tsk->bd);
- kfree(tsk->cookie);
- kfree(tsk);
-}
-EXPORT_SYMBOL_GPL(bcom_task_free);
-
-int
-bcom_load_image(int task, u32 *task_image)
-{
- struct bcom_task_header *hdr = (struct bcom_task_header *)task_image;
- struct bcom_tdt *tdt;
- u32 *desc, *var, *inc;
- u32 *desc_src, *var_src, *inc_src;
-
- /* Safety checks */
- if (hdr->magic != BCOM_TASK_MAGIC) {
- printk(KERN_ERR DRIVER_NAME
- ": Trying to load invalid microcode\n");
- return -EINVAL;
- }
-
- if ((task < 0) || (task >= BCOM_MAX_TASKS)) {
- printk(KERN_ERR DRIVER_NAME
- ": Trying to load invalid task %d\n", task);
- return -EINVAL;
- }
-
- /* Initial load or reload */
- tdt = &bcom_eng->tdt[task];
-
- if (tdt->start) {
- desc = bcom_task_desc(task);
- if (hdr->desc_size != bcom_task_num_descs(task)) {
- printk(KERN_ERR DRIVER_NAME
- ": Trying to reload wrong task image "
- "(%d size %d/%d)!\n",
- task,
- hdr->desc_size,
- bcom_task_num_descs(task));
- return -EINVAL;
- }
- } else {
- phys_addr_t start_pa;
-
- desc = bcom_sram_alloc(hdr->desc_size * sizeof(u32), 4, &start_pa);
- if (!desc)
- return -ENOMEM;
-
- tdt->start = start_pa;
- tdt->stop = start_pa + ((hdr->desc_size-1) * sizeof(u32));
- }
-
- var = bcom_task_var(task);
- inc = bcom_task_inc(task);
-
- /* Clear & copy */
- memset(var, 0x00, BCOM_VAR_SIZE);
- memset(inc, 0x00, BCOM_INC_SIZE);
-
- desc_src = (u32 *)(hdr + 1);
- var_src = desc_src + hdr->desc_size;
- inc_src = var_src + hdr->var_size;
-
- memcpy(desc, desc_src, hdr->desc_size * sizeof(u32));
- memcpy(var + hdr->first_var, var_src, hdr->var_size * sizeof(u32));
- memcpy(inc, inc_src, hdr->inc_size * sizeof(u32));
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(bcom_load_image);
-
-void
-bcom_set_initiator(int task, int initiator)
-{
- int i;
- int num_descs;
- u32 *desc;
- int next_drd_has_initiator;
-
- bcom_set_tcr_initiator(task, initiator);
-
- /* Just setting tcr is apparently not enough due to some problem */
- /* with it. So we just go thru all the microcode and replace in */
- /* the DRD directly */
-
- desc = bcom_task_desc(task);
- next_drd_has_initiator = 1;
- num_descs = bcom_task_num_descs(task);
-
- for (i=0; i<num_descs; i++, desc++) {
- if (!bcom_desc_is_drd(*desc))
- continue;
- if (next_drd_has_initiator)
- if (bcom_desc_initiator(*desc) != BCOM_INITIATOR_ALWAYS)
- bcom_set_desc_initiator(desc, initiator);
- next_drd_has_initiator = !bcom_drd_is_extended(*desc);
- }
-}
-EXPORT_SYMBOL_GPL(bcom_set_initiator);
-
-
-/* Public API */
-
-void
-bcom_enable(struct bcom_task *tsk)
-{
- bcom_enable_task(tsk->tasknum);
-}
-EXPORT_SYMBOL_GPL(bcom_enable);
-
-void
-bcom_disable(struct bcom_task *tsk)
-{
- bcom_disable_task(tsk->tasknum);
-}
-EXPORT_SYMBOL_GPL(bcom_disable);
-
-
-/* ======================================================================== */
-/* Engine init/cleanup */
-/* ======================================================================== */
-
-/* Function Descriptor table */
-/* this will need to be updated if Freescale changes their task code FDT */
-static u32 fdt_ops[] = {
- 0xa0045670, /* FDT[48] - load_acc() */
- 0x80045670, /* FDT[49] - unload_acc() */
- 0x21800000, /* FDT[50] - and() */
- 0x21e00000, /* FDT[51] - or() */
- 0x21500000, /* FDT[52] - xor() */
- 0x21400000, /* FDT[53] - andn() */
- 0x21500000, /* FDT[54] - not() */
- 0x20400000, /* FDT[55] - add() */
- 0x20500000, /* FDT[56] - sub() */
- 0x20800000, /* FDT[57] - lsh() */
- 0x20a00000, /* FDT[58] - rsh() */
- 0xc0170000, /* FDT[59] - crc8() */
- 0xc0145670, /* FDT[60] - crc16() */
- 0xc0345670, /* FDT[61] - crc32() */
- 0xa0076540, /* FDT[62] - endian32() */
- 0xa0000760, /* FDT[63] - endian16() */
-};
-
-
-static int __devinit
-bcom_engine_init(void)
-{
- int task;
- phys_addr_t tdt_pa, ctx_pa, var_pa, fdt_pa;
- unsigned int tdt_size, ctx_size, var_size, fdt_size;
-
- /* Allocate & clear SRAM zones for FDT, TDTs, contexts and vars/incs */
- tdt_size = BCOM_MAX_TASKS * sizeof(struct bcom_tdt);
- ctx_size = BCOM_MAX_TASKS * BCOM_CTX_SIZE;
- var_size = BCOM_MAX_TASKS * (BCOM_VAR_SIZE + BCOM_INC_SIZE);
- fdt_size = BCOM_FDT_SIZE;
-
- bcom_eng->tdt = bcom_sram_alloc(tdt_size, sizeof(u32), &tdt_pa);
- bcom_eng->ctx = bcom_sram_alloc(ctx_size, BCOM_CTX_ALIGN, &ctx_pa);
- bcom_eng->var = bcom_sram_alloc(var_size, BCOM_VAR_ALIGN, &var_pa);
- bcom_eng->fdt = bcom_sram_alloc(fdt_size, BCOM_FDT_ALIGN, &fdt_pa);
-
- if (!bcom_eng->tdt || !bcom_eng->ctx || !bcom_eng->var || !bcom_eng->fdt) {
- printk(KERN_ERR "DMA: SRAM alloc failed in engine init !\n");
-
- bcom_sram_free(bcom_eng->tdt);
- bcom_sram_free(bcom_eng->ctx);
- bcom_sram_free(bcom_eng->var);
- bcom_sram_free(bcom_eng->fdt);
-
- return -ENOMEM;
- }
-
- memset(bcom_eng->tdt, 0x00, tdt_size);
- memset(bcom_eng->ctx, 0x00, ctx_size);
- memset(bcom_eng->var, 0x00, var_size);
- memset(bcom_eng->fdt, 0x00, fdt_size);
-
- /* Copy the FDT for the EU#3 */
- memcpy(&bcom_eng->fdt[48], fdt_ops, sizeof(fdt_ops));
-
- /* Initialize Task base structure */
- for (task=0; task<BCOM_MAX_TASKS; task++)
- {
- out_be16(&bcom_eng->regs->tcr[task], 0);
- out_8(&bcom_eng->regs->ipr[task], 0);
-
- bcom_eng->tdt[task].context = ctx_pa;
- bcom_eng->tdt[task].var = var_pa;
- bcom_eng->tdt[task].fdt = fdt_pa;
-
- var_pa += BCOM_VAR_SIZE + BCOM_INC_SIZE;
- ctx_pa += BCOM_CTX_SIZE;
- }
-
- out_be32(&bcom_eng->regs->taskBar, tdt_pa);
-
- /* Init 'always' initiator */
- out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_ALWAYS], BCOM_IPR_ALWAYS);
-
- /* Disable COMM Bus Prefetch on the original 5200; it's broken */
- if ((mfspr(SPRN_SVR) & MPC5200_SVR_MASK) == MPC5200_SVR)
- bcom_disable_prefetch();
-
- /* Init lock */
- spin_lock_init(&bcom_eng->lock);
-
- return 0;
-}
-
-static void
-bcom_engine_cleanup(void)
-{
- int task;
-
- /* Stop all tasks */
- for (task=0; task<BCOM_MAX_TASKS; task++)
- {
- out_be16(&bcom_eng->regs->tcr[task], 0);
- out_8(&bcom_eng->regs->ipr[task], 0);
- }
-
- out_be32(&bcom_eng->regs->taskBar, 0ul);
-
- /* Release the SRAM zones */
- bcom_sram_free(bcom_eng->tdt);
- bcom_sram_free(bcom_eng->ctx);
- bcom_sram_free(bcom_eng->var);
- bcom_sram_free(bcom_eng->fdt);
-}
-
-
-/* ======================================================================== */
-/* OF platform driver */
-/* ======================================================================== */
-
-static int __devinit mpc52xx_bcom_probe(struct platform_device *op)
-{
- struct device_node *ofn_sram;
- struct resource res_bcom;
-
- int rv;
-
- /* Inform user we're ok so far */
- printk(KERN_INFO "DMA: MPC52xx BestComm driver\n");
-
- /* Get the bestcomm node */
- of_node_get(op->dev.of_node);
-
- /* Prepare SRAM */
- ofn_sram = of_find_matching_node(NULL, mpc52xx_sram_ids);
- if (!ofn_sram) {
- printk(KERN_ERR DRIVER_NAME ": "
- "No SRAM found in device tree\n");
- rv = -ENODEV;
- goto error_ofput;
- }
- rv = bcom_sram_init(ofn_sram, DRIVER_NAME);
- of_node_put(ofn_sram);
-
- if (rv) {
- printk(KERN_ERR DRIVER_NAME ": "
- "Error in SRAM init\n");
- goto error_ofput;
- }
-
- /* Get a clean struct */
- bcom_eng = kzalloc(sizeof(struct bcom_engine), GFP_KERNEL);
- if (!bcom_eng) {
- printk(KERN_ERR DRIVER_NAME ": "
- "Can't allocate state structure\n");
- rv = -ENOMEM;
- goto error_sramclean;
- }
-
- /* Save the node */
- bcom_eng->ofnode = op->dev.of_node;
-
- /* Get, reserve & map io */
- if (of_address_to_resource(op->dev.of_node, 0, &res_bcom)) {
- printk(KERN_ERR DRIVER_NAME ": "
- "Can't get resource\n");
- rv = -EINVAL;
- goto error_sramclean;
- }
-
- if (!request_mem_region(res_bcom.start, sizeof(struct mpc52xx_sdma),
- DRIVER_NAME)) {
- printk(KERN_ERR DRIVER_NAME ": "
- "Can't request registers region\n");
- rv = -EBUSY;
- goto error_sramclean;
- }
-
- bcom_eng->regs_base = res_bcom.start;
- bcom_eng->regs = ioremap(res_bcom.start, sizeof(struct mpc52xx_sdma));
- if (!bcom_eng->regs) {
- printk(KERN_ERR DRIVER_NAME ": "
- "Can't map registers\n");
- rv = -ENOMEM;
- goto error_release;
- }
-
- /* Now, do the real init */
- rv = bcom_engine_init();
- if (rv)
- goto error_unmap;
-
- /* Done ! */
- printk(KERN_INFO "DMA: MPC52xx BestComm engine @%08lx ok !\n",
- (long)bcom_eng->regs_base);
-
- return 0;
-
- /* Error path */
-error_unmap:
- iounmap(bcom_eng->regs);
-error_release:
- release_mem_region(res_bcom.start, sizeof(struct mpc52xx_sdma));
-error_sramclean:
- kfree(bcom_eng);
- bcom_sram_cleanup();
-error_ofput:
- of_node_put(op->dev.of_node);
-
- printk(KERN_ERR "DMA: MPC52xx BestComm init failed !\n");
-
- return rv;
-}
-
-
-static int mpc52xx_bcom_remove(struct platform_device *op)
-{
- /* Clean up the engine */
- bcom_engine_cleanup();
-
- /* Cleanup SRAM */
- bcom_sram_cleanup();
-
- /* Release regs */
- iounmap(bcom_eng->regs);
- release_mem_region(bcom_eng->regs_base, sizeof(struct mpc52xx_sdma));
-
- /* Release the node */
- of_node_put(bcom_eng->ofnode);
-
- /* Release memory */
- kfree(bcom_eng);
- bcom_eng = NULL;
-
- return 0;
-}
-
-static struct of_device_id mpc52xx_bcom_of_match[] = {
- { .compatible = "fsl,mpc5200-bestcomm", },
- { .compatible = "mpc5200-bestcomm", },
- {},
-};
-
-MODULE_DEVICE_TABLE(of, mpc52xx_bcom_of_match);
-
-
-static struct platform_driver mpc52xx_bcom_of_platform_driver = {
- .probe = mpc52xx_bcom_probe,
- .remove = mpc52xx_bcom_remove,
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- .of_match_table = mpc52xx_bcom_of_match,
- },
-};
-
-
-/* ======================================================================== */
-/* Module */
-/* ======================================================================== */
-
-static int __init
-mpc52xx_bcom_init(void)
-{
- return platform_driver_register(&mpc52xx_bcom_of_platform_driver);
-}
-
-static void __exit
-mpc52xx_bcom_exit(void)
-{
- platform_driver_unregister(&mpc52xx_bcom_of_platform_driver);
-}
-
-/* If we're not a module, we must make sure everything is setup before */
-/* anyone tries to use us ... that's why we use subsys_initcall instead */
-/* of module_init. */
-subsys_initcall(mpc52xx_bcom_init);
-module_exit(mpc52xx_bcom_exit);
-
-MODULE_DESCRIPTION("Freescale MPC52xx BestComm DMA");
-MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>");
-MODULE_AUTHOR("Andrey Volkov <avolkov@varma-el.com>");
-MODULE_AUTHOR("Dale Farnsworth <dfarnsworth@mvista.com>");
-MODULE_LICENSE("GPL v2");
-
+++ /dev/null
-/*
- * Public header for the MPC52xx processor BestComm driver
- *
- *
- * Copyright (C) 2006 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2005 Varma Electronics Oy,
- * ( by Andrey Volkov <avolkov@varma-el.com> )
- * Copyright (C) 2003-2004 MontaVista, Software, Inc.
- * ( by Dale Farnsworth <dfarnsworth@mvista.com> )
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __BESTCOMM_H__
-#define __BESTCOMM_H__
-
-/**
- * struct bcom_bd - Structure describing a generic BestComm buffer descriptor
- * @status: The current status of this buffer. Exact meaning depends on the
- * task type
- * @data: An array of u32 extra data. Size of array is task dependent.
- *
- * Note: Don't dereference a bcom_bd pointer as an array. The size of the
- * bcom_bd is variable. Use bcom_get_bd() instead.
- */
-struct bcom_bd {
- u32 status;
- u32 data[0]; /* variable payload size */
-};
-
-/* ======================================================================== */
-/* Generic task management */
-/* ======================================================================== */
-
-/**
- * struct bcom_task - Structure describing a loaded BestComm task
- *
- * This structure is never built by the driver it self. It's built and
- * filled the intermediate layer of the BestComm API, the task dependent
- * support code.
- *
- * Most likely you don't need to poke around inside this structure. The
- * fields are exposed in the header just for the sake of inline functions
- */
-struct bcom_task {
- unsigned int tasknum;
- unsigned int flags;
- int irq;
-
- struct bcom_bd *bd;
- phys_addr_t bd_pa;
- void **cookie;
- unsigned short index;
- unsigned short outdex;
- unsigned int num_bd;
- unsigned int bd_size;
-
- void* priv;
-};
-
-#define BCOM_FLAGS_NONE 0x00000000ul
-#define BCOM_FLAGS_ENABLE_TASK (1ul << 0)
-
-/**
- * bcom_enable - Enable a BestComm task
- * @tsk: The BestComm task structure
- *
- * This function makes sure the given task is enabled and can be run
- * by the BestComm engine as needed
- */
-extern void bcom_enable(struct bcom_task *tsk);
-
-/**
- * bcom_disable - Disable a BestComm task
- * @tsk: The BestComm task structure
- *
- * This function disable a given task, making sure it's not executed
- * by the BestComm engine.
- */
-extern void bcom_disable(struct bcom_task *tsk);
-
-
-/**
- * bcom_get_task_irq - Returns the irq number of a BestComm task
- * @tsk: The BestComm task structure
- */
-static inline int
-bcom_get_task_irq(struct bcom_task *tsk) {
- return tsk->irq;
-}
-
-/* ======================================================================== */
-/* BD based tasks helpers */
-/* ======================================================================== */
-
-#define BCOM_BD_READY 0x40000000ul
-
-/** _bcom_next_index - Get next input index.
- * @tsk: pointer to task structure
- *
- * Support function; Device drivers should not call this
- */
-static inline int
-_bcom_next_index(struct bcom_task *tsk)
-{
- return ((tsk->index + 1) == tsk->num_bd) ? 0 : tsk->index + 1;
-}
-
-/** _bcom_next_outdex - Get next output index.
- * @tsk: pointer to task structure
- *
- * Support function; Device drivers should not call this
- */
-static inline int
-_bcom_next_outdex(struct bcom_task *tsk)
-{
- return ((tsk->outdex + 1) == tsk->num_bd) ? 0 : tsk->outdex + 1;
-}
-
-/**
- * bcom_queue_empty - Checks if a BestComm task BD queue is empty
- * @tsk: The BestComm task structure
- */
-static inline int
-bcom_queue_empty(struct bcom_task *tsk)
-{
- return tsk->index == tsk->outdex;
-}
-
-/**
- * bcom_queue_full - Checks if a BestComm task BD queue is full
- * @tsk: The BestComm task structure
- */
-static inline int
-bcom_queue_full(struct bcom_task *tsk)
-{
- return tsk->outdex == _bcom_next_index(tsk);
-}
-
-/**
- * bcom_get_bd - Get a BD from the queue
- * @tsk: The BestComm task structure
- * index: Index of the BD to fetch
- */
-static inline struct bcom_bd
-*bcom_get_bd(struct bcom_task *tsk, unsigned int index)
-{
- /* A cast to (void*) so the address can be incremented by the
- * real size instead of by sizeof(struct bcom_bd) */
- return ((void *)tsk->bd) + (index * tsk->bd_size);
-}
-
-/**
- * bcom_buffer_done - Checks if a BestComm
- * @tsk: The BestComm task structure
- */
-static inline int
-bcom_buffer_done(struct bcom_task *tsk)
-{
- struct bcom_bd *bd;
- if (bcom_queue_empty(tsk))
- return 0;
-
- bd = bcom_get_bd(tsk, tsk->outdex);
- return !(bd->status & BCOM_BD_READY);
-}
-
-/**
- * bcom_prepare_next_buffer - clear status of next available buffer.
- * @tsk: The BestComm task structure
- *
- * Returns pointer to next buffer descriptor
- */
-static inline struct bcom_bd *
-bcom_prepare_next_buffer(struct bcom_task *tsk)
-{
- struct bcom_bd *bd;
-
- bd = bcom_get_bd(tsk, tsk->index);
- bd->status = 0; /* cleanup last status */
- return bd;
-}
-
-static inline void
-bcom_submit_next_buffer(struct bcom_task *tsk, void *cookie)
-{
- struct bcom_bd *bd = bcom_get_bd(tsk, tsk->index);
-
- tsk->cookie[tsk->index] = cookie;
- mb(); /* ensure the bd is really up-to-date */
- bd->status |= BCOM_BD_READY;
- tsk->index = _bcom_next_index(tsk);
- if (tsk->flags & BCOM_FLAGS_ENABLE_TASK)
- bcom_enable(tsk);
-}
-
-static inline void *
-bcom_retrieve_buffer(struct bcom_task *tsk, u32 *p_status, struct bcom_bd **p_bd)
-{
- void *cookie = tsk->cookie[tsk->outdex];
- struct bcom_bd *bd = bcom_get_bd(tsk, tsk->outdex);
-
- if (p_status)
- *p_status = bd->status;
- if (p_bd)
- *p_bd = bd;
- tsk->outdex = _bcom_next_outdex(tsk);
- return cookie;
-}
-
-#endif /* __BESTCOMM_H__ */
+++ /dev/null
-/*
- * Private header for the MPC52xx processor BestComm driver
- *
- * By private, we mean that driver should not use it directly. It's meant
- * to be used by the BestComm engine driver itself and by the intermediate
- * layer between the core and the drivers.
- *
- * Copyright (C) 2006 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2005 Varma Electronics Oy,
- * ( by Andrey Volkov <avolkov@varma-el.com> )
- * Copyright (C) 2003-2004 MontaVista, Software, Inc.
- * ( by Dale Farnsworth <dfarnsworth@mvista.com> )
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __BESTCOMM_PRIV_H__
-#define __BESTCOMM_PRIV_H__
-
-#include <linux/spinlock.h>
-#include <linux/of.h>
-#include <asm/io.h>
-#include <asm/mpc52xx.h>
-
-#include "sram.h"
-
-
-/* ======================================================================== */
-/* Engine related stuff */
-/* ======================================================================== */
-
-/* Zones sizes and needed alignments */
-#define BCOM_MAX_TASKS 16
-#define BCOM_MAX_VAR 24
-#define BCOM_MAX_INC 8
-#define BCOM_MAX_FDT 64
-#define BCOM_MAX_CTX 20
-#define BCOM_CTX_SIZE (BCOM_MAX_CTX * sizeof(u32))
-#define BCOM_CTX_ALIGN 0x100
-#define BCOM_VAR_SIZE (BCOM_MAX_VAR * sizeof(u32))
-#define BCOM_INC_SIZE (BCOM_MAX_INC * sizeof(u32))
-#define BCOM_VAR_ALIGN 0x80
-#define BCOM_FDT_SIZE (BCOM_MAX_FDT * sizeof(u32))
-#define BCOM_FDT_ALIGN 0x100
-
-/**
- * struct bcom_tdt - Task Descriptor Table Entry
- *
- */
-struct bcom_tdt {
- u32 start;
- u32 stop;
- u32 var;
- u32 fdt;
- u32 exec_status; /* used internally by BestComm engine */
- u32 mvtp; /* used internally by BestComm engine */
- u32 context;
- u32 litbase;
-};
-
-/**
- * struct bcom_engine
- *
- * This holds all info needed globaly to handle the engine
- */
-struct bcom_engine {
- struct device_node *ofnode;
- struct mpc52xx_sdma __iomem *regs;
- phys_addr_t regs_base;
-
- struct bcom_tdt *tdt;
- u32 *ctx;
- u32 *var;
- u32 *fdt;
-
- spinlock_t lock;
-};
-
-extern struct bcom_engine *bcom_eng;
-
-
-/* ======================================================================== */
-/* Tasks related stuff */
-/* ======================================================================== */
-
-/* Tasks image header */
-#define BCOM_TASK_MAGIC 0x4243544B /* 'BCTK' */
-
-struct bcom_task_header {
- u32 magic;
- u8 desc_size; /* the size fields */
- u8 var_size; /* are given in number */
- u8 inc_size; /* of 32-bits words */
- u8 first_var;
- u8 reserved[8];
-};
-
-/* Descriptors structure & co */
-#define BCOM_DESC_NOP 0x000001f8
-#define BCOM_LCD_MASK 0x80000000
-#define BCOM_DRD_EXTENDED 0x40000000
-#define BCOM_DRD_INITIATOR_SHIFT 21
-
-/* Tasks pragma */
-#define BCOM_PRAGMA_BIT_RSV 7 /* reserved pragma bit */
-#define BCOM_PRAGMA_BIT_PRECISE_INC 6 /* increment 0=when possible, */
- /* 1=iter end */
-#define BCOM_PRAGMA_BIT_RST_ERROR_NO 5 /* don't reset errors on */
- /* task enable */
-#define BCOM_PRAGMA_BIT_PACK 4 /* pack data enable */
-#define BCOM_PRAGMA_BIT_INTEGER 3 /* data alignment */
- /* 0=frac(msb), 1=int(lsb) */
-#define BCOM_PRAGMA_BIT_SPECREAD 2 /* XLB speculative read */
-#define BCOM_PRAGMA_BIT_CW 1 /* write line buffer enable */
-#define BCOM_PRAGMA_BIT_RL 0 /* read line buffer enable */
-
- /* Looks like XLB speculative read generates XLB errors when a buffer
- * is at the end of the physical memory. i.e. when accessing the
- * lasts words, the engine tries to prefetch the next but there is no
- * next ...
- */
-#define BCOM_STD_PRAGMA ((0 << BCOM_PRAGMA_BIT_RSV) | \
- (0 << BCOM_PRAGMA_BIT_PRECISE_INC) | \
- (0 << BCOM_PRAGMA_BIT_RST_ERROR_NO) | \
- (0 << BCOM_PRAGMA_BIT_PACK) | \
- (0 << BCOM_PRAGMA_BIT_INTEGER) | \
- (0 << BCOM_PRAGMA_BIT_SPECREAD) | \
- (1 << BCOM_PRAGMA_BIT_CW) | \
- (1 << BCOM_PRAGMA_BIT_RL))
-
-#define BCOM_PCI_PRAGMA ((0 << BCOM_PRAGMA_BIT_RSV) | \
- (0 << BCOM_PRAGMA_BIT_PRECISE_INC) | \
- (0 << BCOM_PRAGMA_BIT_RST_ERROR_NO) | \
- (0 << BCOM_PRAGMA_BIT_PACK) | \
- (1 << BCOM_PRAGMA_BIT_INTEGER) | \
- (0 << BCOM_PRAGMA_BIT_SPECREAD) | \
- (1 << BCOM_PRAGMA_BIT_CW) | \
- (1 << BCOM_PRAGMA_BIT_RL))
-
-#define BCOM_ATA_PRAGMA BCOM_STD_PRAGMA
-#define BCOM_CRC16_DP_0_PRAGMA BCOM_STD_PRAGMA
-#define BCOM_CRC16_DP_1_PRAGMA BCOM_STD_PRAGMA
-#define BCOM_FEC_RX_BD_PRAGMA BCOM_STD_PRAGMA
-#define BCOM_FEC_TX_BD_PRAGMA BCOM_STD_PRAGMA
-#define BCOM_GEN_DP_0_PRAGMA BCOM_STD_PRAGMA
-#define BCOM_GEN_DP_1_PRAGMA BCOM_STD_PRAGMA
-#define BCOM_GEN_DP_2_PRAGMA BCOM_STD_PRAGMA
-#define BCOM_GEN_DP_3_PRAGMA BCOM_STD_PRAGMA
-#define BCOM_GEN_DP_BD_0_PRAGMA BCOM_STD_PRAGMA
-#define BCOM_GEN_DP_BD_1_PRAGMA BCOM_STD_PRAGMA
-#define BCOM_GEN_RX_BD_PRAGMA BCOM_STD_PRAGMA
-#define BCOM_GEN_TX_BD_PRAGMA BCOM_STD_PRAGMA
-#define BCOM_GEN_LPC_PRAGMA BCOM_STD_PRAGMA
-#define BCOM_PCI_RX_PRAGMA BCOM_PCI_PRAGMA
-#define BCOM_PCI_TX_PRAGMA BCOM_PCI_PRAGMA
-
-/* Initiators number */
-#define BCOM_INITIATOR_ALWAYS 0
-#define BCOM_INITIATOR_SCTMR_0 1
-#define BCOM_INITIATOR_SCTMR_1 2
-#define BCOM_INITIATOR_FEC_RX 3
-#define BCOM_INITIATOR_FEC_TX 4
-#define BCOM_INITIATOR_ATA_RX 5
-#define BCOM_INITIATOR_ATA_TX 6
-#define BCOM_INITIATOR_SCPCI_RX 7
-#define BCOM_INITIATOR_SCPCI_TX 8
-#define BCOM_INITIATOR_PSC3_RX 9
-#define BCOM_INITIATOR_PSC3_TX 10
-#define BCOM_INITIATOR_PSC2_RX 11
-#define BCOM_INITIATOR_PSC2_TX 12
-#define BCOM_INITIATOR_PSC1_RX 13
-#define BCOM_INITIATOR_PSC1_TX 14
-#define BCOM_INITIATOR_SCTMR_2 15
-#define BCOM_INITIATOR_SCLPC 16
-#define BCOM_INITIATOR_PSC5_RX 17
-#define BCOM_INITIATOR_PSC5_TX 18
-#define BCOM_INITIATOR_PSC4_RX 19
-#define BCOM_INITIATOR_PSC4_TX 20
-#define BCOM_INITIATOR_I2C2_RX 21
-#define BCOM_INITIATOR_I2C2_TX 22
-#define BCOM_INITIATOR_I2C1_RX 23
-#define BCOM_INITIATOR_I2C1_TX 24
-#define BCOM_INITIATOR_PSC6_RX 25
-#define BCOM_INITIATOR_PSC6_TX 26
-#define BCOM_INITIATOR_IRDA_RX 25
-#define BCOM_INITIATOR_IRDA_TX 26
-#define BCOM_INITIATOR_SCTMR_3 27
-#define BCOM_INITIATOR_SCTMR_4 28
-#define BCOM_INITIATOR_SCTMR_5 29
-#define BCOM_INITIATOR_SCTMR_6 30
-#define BCOM_INITIATOR_SCTMR_7 31
-
-/* Initiators priorities */
-#define BCOM_IPR_ALWAYS 7
-#define BCOM_IPR_SCTMR_0 2
-#define BCOM_IPR_SCTMR_1 2
-#define BCOM_IPR_FEC_RX 6
-#define BCOM_IPR_FEC_TX 5
-#define BCOM_IPR_ATA_RX 7
-#define BCOM_IPR_ATA_TX 7
-#define BCOM_IPR_SCPCI_RX 2
-#define BCOM_IPR_SCPCI_TX 2
-#define BCOM_IPR_PSC3_RX 2
-#define BCOM_IPR_PSC3_TX 2
-#define BCOM_IPR_PSC2_RX 2
-#define BCOM_IPR_PSC2_TX 2
-#define BCOM_IPR_PSC1_RX 2
-#define BCOM_IPR_PSC1_TX 2
-#define BCOM_IPR_SCTMR_2 2
-#define BCOM_IPR_SCLPC 2
-#define BCOM_IPR_PSC5_RX 2
-#define BCOM_IPR_PSC5_TX 2
-#define BCOM_IPR_PSC4_RX 2
-#define BCOM_IPR_PSC4_TX 2
-#define BCOM_IPR_I2C2_RX 2
-#define BCOM_IPR_I2C2_TX 2
-#define BCOM_IPR_I2C1_RX 2
-#define BCOM_IPR_I2C1_TX 2
-#define BCOM_IPR_PSC6_RX 2
-#define BCOM_IPR_PSC6_TX 2
-#define BCOM_IPR_IRDA_RX 2
-#define BCOM_IPR_IRDA_TX 2
-#define BCOM_IPR_SCTMR_3 2
-#define BCOM_IPR_SCTMR_4 2
-#define BCOM_IPR_SCTMR_5 2
-#define BCOM_IPR_SCTMR_6 2
-#define BCOM_IPR_SCTMR_7 2
-
-
-/* ======================================================================== */
-/* API */
-/* ======================================================================== */
-
-extern struct bcom_task *bcom_task_alloc(int bd_count, int bd_size, int priv_size);
-extern void bcom_task_free(struct bcom_task *tsk);
-extern int bcom_load_image(int task, u32 *task_image);
-extern void bcom_set_initiator(int task, int initiator);
-
-
-#define TASK_ENABLE 0x8000
-
-/**
- * bcom_disable_prefetch - Hook to disable bus prefetching
- *
- * ATA DMA and the original MPC5200 need this due to silicon bugs. At the
- * moment disabling prefetch is a one-way street. There is no mechanism
- * in place to turn prefetch back on after it has been disabled. There is
- * no reason it couldn't be done, it would just be more complex to implement.
- */
-static inline void bcom_disable_prefetch(void)
-{
- u16 regval;
-
- regval = in_be16(&bcom_eng->regs->PtdCntrl);
- out_be16(&bcom_eng->regs->PtdCntrl, regval | 1);
-};
-
-static inline void
-bcom_enable_task(int task)
-{
- u16 reg;
- reg = in_be16(&bcom_eng->regs->tcr[task]);
- out_be16(&bcom_eng->regs->tcr[task], reg | TASK_ENABLE);
-}
-
-static inline void
-bcom_disable_task(int task)
-{
- u16 reg = in_be16(&bcom_eng->regs->tcr[task]);
- out_be16(&bcom_eng->regs->tcr[task], reg & ~TASK_ENABLE);
-}
-
-
-static inline u32 *
-bcom_task_desc(int task)
-{
- return bcom_sram_pa2va(bcom_eng->tdt[task].start);
-}
-
-static inline int
-bcom_task_num_descs(int task)
-{
- return (bcom_eng->tdt[task].stop - bcom_eng->tdt[task].start)/sizeof(u32) + 1;
-}
-
-static inline u32 *
-bcom_task_var(int task)
-{
- return bcom_sram_pa2va(bcom_eng->tdt[task].var);
-}
-
-static inline u32 *
-bcom_task_inc(int task)
-{
- return &bcom_task_var(task)[BCOM_MAX_VAR];
-}
-
-
-static inline int
-bcom_drd_is_extended(u32 desc)
-{
- return (desc) & BCOM_DRD_EXTENDED;
-}
-
-static inline int
-bcom_desc_is_drd(u32 desc)
-{
- return !(desc & BCOM_LCD_MASK) && desc != BCOM_DESC_NOP;
-}
-
-static inline int
-bcom_desc_initiator(u32 desc)
-{
- return (desc >> BCOM_DRD_INITIATOR_SHIFT) & 0x1f;
-}
-
-static inline void
-bcom_set_desc_initiator(u32 *desc, int initiator)
-{
- *desc = (*desc & ~(0x1f << BCOM_DRD_INITIATOR_SHIFT)) |
- ((initiator & 0x1f) << BCOM_DRD_INITIATOR_SHIFT);
-}
-
-
-static inline void
-bcom_set_task_pragma(int task, int pragma)
-{
- u32 *fdt = &bcom_eng->tdt[task].fdt;
- *fdt = (*fdt & ~0xff) | pragma;
-}
-
-static inline void
-bcom_set_task_auto_start(int task, int next_task)
-{
- u16 __iomem *tcr = &bcom_eng->regs->tcr[task];
- out_be16(tcr, (in_be16(tcr) & ~0xff) | 0x00c0 | next_task);
-}
-
-static inline void
-bcom_set_tcr_initiator(int task, int initiator)
-{
- u16 __iomem *tcr = &bcom_eng->regs->tcr[task];
- out_be16(tcr, (in_be16(tcr) & ~0x1f00) | ((initiator & 0x1f) << 8));
-}
-
-
-#endif /* __BESTCOMM_PRIV_H__ */
-
+++ /dev/null
-/*
- * Bestcomm FEC tasks driver
- *
- *
- * Copyright (C) 2006-2007 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003-2004 MontaVista, Software, Inc.
- * ( by Dale Farnsworth <dfarnsworth@mvista.com> )
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <asm/io.h>
-
-#include "bestcomm.h"
-#include "bestcomm_priv.h"
-#include "fec.h"
-
-
-/* ======================================================================== */
-/* Task image/var/inc */
-/* ======================================================================== */
-
-/* fec tasks images */
-extern u32 bcom_fec_rx_task[];
-extern u32 bcom_fec_tx_task[];
-
-/* rx task vars that need to be set before enabling the task */
-struct bcom_fec_rx_var {
- u32 enable; /* (u16*) address of task's control register */
- u32 fifo; /* (u32*) address of fec's fifo */
- u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */
- u32 bd_last; /* (struct bcom_bd*) end of ring buffer */
- u32 bd_start; /* (struct bcom_bd*) current bd */
- u32 buffer_size; /* size of receive buffer */
-};
-
-/* rx task incs that need to be set before enabling the task */
-struct bcom_fec_rx_inc {
- u16 pad0;
- s16 incr_bytes;
- u16 pad1;
- s16 incr_dst;
- u16 pad2;
- s16 incr_dst_ma;
-};
-
-/* tx task vars that need to be set before enabling the task */
-struct bcom_fec_tx_var {
- u32 DRD; /* (u32*) address of self-modified DRD */
- u32 fifo; /* (u32*) address of fec's fifo */
- u32 enable; /* (u16*) address of task's control register */
- u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */
- u32 bd_last; /* (struct bcom_bd*) end of ring buffer */
- u32 bd_start; /* (struct bcom_bd*) current bd */
- u32 buffer_size; /* set by uCode for each packet */
-};
-
-/* tx task incs that need to be set before enabling the task */
-struct bcom_fec_tx_inc {
- u16 pad0;
- s16 incr_bytes;
- u16 pad1;
- s16 incr_src;
- u16 pad2;
- s16 incr_src_ma;
-};
-
-/* private structure in the task */
-struct bcom_fec_priv {
- phys_addr_t fifo;
- int maxbufsize;
-};
-
-
-/* ======================================================================== */
-/* Task support code */
-/* ======================================================================== */
-
-struct bcom_task *
-bcom_fec_rx_init(int queue_len, phys_addr_t fifo, int maxbufsize)
-{
- struct bcom_task *tsk;
- struct bcom_fec_priv *priv;
-
- tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_fec_bd),
- sizeof(struct bcom_fec_priv));
- if (!tsk)
- return NULL;
-
- tsk->flags = BCOM_FLAGS_NONE;
-
- priv = tsk->priv;
- priv->fifo = fifo;
- priv->maxbufsize = maxbufsize;
-
- if (bcom_fec_rx_reset(tsk)) {
- bcom_task_free(tsk);
- return NULL;
- }
-
- return tsk;
-}
-EXPORT_SYMBOL_GPL(bcom_fec_rx_init);
-
-int
-bcom_fec_rx_reset(struct bcom_task *tsk)
-{
- struct bcom_fec_priv *priv = tsk->priv;
- struct bcom_fec_rx_var *var;
- struct bcom_fec_rx_inc *inc;
-
- /* Shutdown the task */
- bcom_disable_task(tsk->tasknum);
-
- /* Reset the microcode */
- var = (struct bcom_fec_rx_var *) bcom_task_var(tsk->tasknum);
- inc = (struct bcom_fec_rx_inc *) bcom_task_inc(tsk->tasknum);
-
- if (bcom_load_image(tsk->tasknum, bcom_fec_rx_task))
- return -1;
-
- var->enable = bcom_eng->regs_base +
- offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]);
- var->fifo = (u32) priv->fifo;
- var->bd_base = tsk->bd_pa;
- var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size);
- var->bd_start = tsk->bd_pa;
- var->buffer_size = priv->maxbufsize;
-
- inc->incr_bytes = -(s16)sizeof(u32); /* These should be in the */
- inc->incr_dst = sizeof(u32); /* task image, but we stick */
- inc->incr_dst_ma= sizeof(u8); /* to the official ones */
-
- /* Reset the BDs */
- tsk->index = 0;
- tsk->outdex = 0;
-
- memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size);
-
- /* Configure some stuff */
- bcom_set_task_pragma(tsk->tasknum, BCOM_FEC_RX_BD_PRAGMA);
- bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum);
-
- out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_FEC_RX], BCOM_IPR_FEC_RX);
-
- out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum); /* Clear ints */
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(bcom_fec_rx_reset);
-
-void
-bcom_fec_rx_release(struct bcom_task *tsk)
-{
- /* Nothing special for the FEC tasks */
- bcom_task_free(tsk);
-}
-EXPORT_SYMBOL_GPL(bcom_fec_rx_release);
-
-
-
- /* Return 2nd to last DRD */
- /* This is an ugly hack, but at least it's only done
- once at initialization */
-static u32 *self_modified_drd(int tasknum)
-{
- u32 *desc;
- int num_descs;
- int drd_count;
- int i;
-
- num_descs = bcom_task_num_descs(tasknum);
- desc = bcom_task_desc(tasknum) + num_descs - 1;
- drd_count = 0;
- for (i=0; i<num_descs; i++, desc--)
- if (bcom_desc_is_drd(*desc) && ++drd_count == 3)
- break;
- return desc;
-}
-
-struct bcom_task *
-bcom_fec_tx_init(int queue_len, phys_addr_t fifo)
-{
- struct bcom_task *tsk;
- struct bcom_fec_priv *priv;
-
- tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_fec_bd),
- sizeof(struct bcom_fec_priv));
- if (!tsk)
- return NULL;
-
- tsk->flags = BCOM_FLAGS_ENABLE_TASK;
-
- priv = tsk->priv;
- priv->fifo = fifo;
-
- if (bcom_fec_tx_reset(tsk)) {
- bcom_task_free(tsk);
- return NULL;
- }
-
- return tsk;
-}
-EXPORT_SYMBOL_GPL(bcom_fec_tx_init);
-
-int
-bcom_fec_tx_reset(struct bcom_task *tsk)
-{
- struct bcom_fec_priv *priv = tsk->priv;
- struct bcom_fec_tx_var *var;
- struct bcom_fec_tx_inc *inc;
-
- /* Shutdown the task */
- bcom_disable_task(tsk->tasknum);
-
- /* Reset the microcode */
- var = (struct bcom_fec_tx_var *) bcom_task_var(tsk->tasknum);
- inc = (struct bcom_fec_tx_inc *) bcom_task_inc(tsk->tasknum);
-
- if (bcom_load_image(tsk->tasknum, bcom_fec_tx_task))
- return -1;
-
- var->enable = bcom_eng->regs_base +
- offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]);
- var->fifo = (u32) priv->fifo;
- var->DRD = bcom_sram_va2pa(self_modified_drd(tsk->tasknum));
- var->bd_base = tsk->bd_pa;
- var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size);
- var->bd_start = tsk->bd_pa;
-
- inc->incr_bytes = -(s16)sizeof(u32); /* These should be in the */
- inc->incr_src = sizeof(u32); /* task image, but we stick */
- inc->incr_src_ma= sizeof(u8); /* to the official ones */
-
- /* Reset the BDs */
- tsk->index = 0;
- tsk->outdex = 0;
-
- memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size);
-
- /* Configure some stuff */
- bcom_set_task_pragma(tsk->tasknum, BCOM_FEC_TX_BD_PRAGMA);
- bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum);
-
- out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_FEC_TX], BCOM_IPR_FEC_TX);
-
- out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum); /* Clear ints */
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(bcom_fec_tx_reset);
-
-void
-bcom_fec_tx_release(struct bcom_task *tsk)
-{
- /* Nothing special for the FEC tasks */
- bcom_task_free(tsk);
-}
-EXPORT_SYMBOL_GPL(bcom_fec_tx_release);
-
-
-MODULE_DESCRIPTION("BestComm FEC tasks driver");
-MODULE_AUTHOR("Dale Farnsworth <dfarnsworth@mvista.com>");
-MODULE_LICENSE("GPL v2");
-
+++ /dev/null
-/*
- * Header for Bestcomm FEC tasks driver
- *
- *
- * Copyright (C) 2006-2007 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003-2004 MontaVista, Software, Inc.
- * ( by Dale Farnsworth <dfarnsworth@mvista.com> )
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __BESTCOMM_FEC_H__
-#define __BESTCOMM_FEC_H__
-
-
-struct bcom_fec_bd {
- u32 status;
- u32 skb_pa;
-};
-
-#define BCOM_FEC_TX_BD_TFD 0x08000000ul /* transmit frame done */
-#define BCOM_FEC_TX_BD_TC 0x04000000ul /* transmit CRC */
-#define BCOM_FEC_TX_BD_ABC 0x02000000ul /* append bad CRC */
-
-#define BCOM_FEC_RX_BD_L 0x08000000ul /* buffer is last in frame */
-#define BCOM_FEC_RX_BD_BC 0x00800000ul /* DA is broadcast */
-#define BCOM_FEC_RX_BD_MC 0x00400000ul /* DA is multicast and not broadcast */
-#define BCOM_FEC_RX_BD_LG 0x00200000ul /* Rx frame length violation */
-#define BCOM_FEC_RX_BD_NO 0x00100000ul /* Rx non-octet aligned frame */
-#define BCOM_FEC_RX_BD_CR 0x00040000ul /* Rx CRC error */
-#define BCOM_FEC_RX_BD_OV 0x00020000ul /* overrun */
-#define BCOM_FEC_RX_BD_TR 0x00010000ul /* Rx frame truncated */
-#define BCOM_FEC_RX_BD_LEN_MASK 0x000007fful /* mask for length of received frame */
-#define BCOM_FEC_RX_BD_ERRORS (BCOM_FEC_RX_BD_LG | BCOM_FEC_RX_BD_NO | \
- BCOM_FEC_RX_BD_CR | BCOM_FEC_RX_BD_OV | BCOM_FEC_RX_BD_TR)
-
-
-extern struct bcom_task *
-bcom_fec_rx_init(int queue_len, phys_addr_t fifo, int maxbufsize);
-
-extern int
-bcom_fec_rx_reset(struct bcom_task *tsk);
-
-extern void
-bcom_fec_rx_release(struct bcom_task *tsk);
-
-
-extern struct bcom_task *
-bcom_fec_tx_init(int queue_len, phys_addr_t fifo);
-
-extern int
-bcom_fec_tx_reset(struct bcom_task *tsk);
-
-extern void
-bcom_fec_tx_release(struct bcom_task *tsk);
-
-
-#endif /* __BESTCOMM_FEC_H__ */
-
+++ /dev/null
-/*
- * Driver for MPC52xx processor BestComm General Buffer Descriptor
- *
- * Copyright (C) 2007 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2006 AppSpec Computer Technologies Corp.
- * Jeff Gibbons <jeff.gibbons@appspec.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-
-#include <asm/mpc52xx.h>
-#include <asm/mpc52xx_psc.h>
-
-#include "bestcomm.h"
-#include "bestcomm_priv.h"
-#include "gen_bd.h"
-
-
-/* ======================================================================== */
-/* Task image/var/inc */
-/* ======================================================================== */
-
-/* gen_bd tasks images */
-extern u32 bcom_gen_bd_rx_task[];
-extern u32 bcom_gen_bd_tx_task[];
-
-/* rx task vars that need to be set before enabling the task */
-struct bcom_gen_bd_rx_var {
- u32 enable; /* (u16*) address of task's control register */
- u32 fifo; /* (u32*) address of gen_bd's fifo */
- u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */
- u32 bd_last; /* (struct bcom_bd*) end of ring buffer */
- u32 bd_start; /* (struct bcom_bd*) current bd */
- u32 buffer_size; /* size of receive buffer */
-};
-
-/* rx task incs that need to be set before enabling the task */
-struct bcom_gen_bd_rx_inc {
- u16 pad0;
- s16 incr_bytes;
- u16 pad1;
- s16 incr_dst;
-};
-
-/* tx task vars that need to be set before enabling the task */
-struct bcom_gen_bd_tx_var {
- u32 fifo; /* (u32*) address of gen_bd's fifo */
- u32 enable; /* (u16*) address of task's control register */
- u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */
- u32 bd_last; /* (struct bcom_bd*) end of ring buffer */
- u32 bd_start; /* (struct bcom_bd*) current bd */
- u32 buffer_size; /* set by uCode for each packet */
-};
-
-/* tx task incs that need to be set before enabling the task */
-struct bcom_gen_bd_tx_inc {
- u16 pad0;
- s16 incr_bytes;
- u16 pad1;
- s16 incr_src;
- u16 pad2;
- s16 incr_src_ma;
-};
-
-/* private structure */
-struct bcom_gen_bd_priv {
- phys_addr_t fifo;
- int initiator;
- int ipr;
- int maxbufsize;
-};
-
-
-/* ======================================================================== */
-/* Task support code */
-/* ======================================================================== */
-
-struct bcom_task *
-bcom_gen_bd_rx_init(int queue_len, phys_addr_t fifo,
- int initiator, int ipr, int maxbufsize)
-{
- struct bcom_task *tsk;
- struct bcom_gen_bd_priv *priv;
-
- tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_gen_bd),
- sizeof(struct bcom_gen_bd_priv));
- if (!tsk)
- return NULL;
-
- tsk->flags = BCOM_FLAGS_NONE;
-
- priv = tsk->priv;
- priv->fifo = fifo;
- priv->initiator = initiator;
- priv->ipr = ipr;
- priv->maxbufsize = maxbufsize;
-
- if (bcom_gen_bd_rx_reset(tsk)) {
- bcom_task_free(tsk);
- return NULL;
- }
-
- return tsk;
-}
-EXPORT_SYMBOL_GPL(bcom_gen_bd_rx_init);
-
-int
-bcom_gen_bd_rx_reset(struct bcom_task *tsk)
-{
- struct bcom_gen_bd_priv *priv = tsk->priv;
- struct bcom_gen_bd_rx_var *var;
- struct bcom_gen_bd_rx_inc *inc;
-
- /* Shutdown the task */
- bcom_disable_task(tsk->tasknum);
-
- /* Reset the microcode */
- var = (struct bcom_gen_bd_rx_var *) bcom_task_var(tsk->tasknum);
- inc = (struct bcom_gen_bd_rx_inc *) bcom_task_inc(tsk->tasknum);
-
- if (bcom_load_image(tsk->tasknum, bcom_gen_bd_rx_task))
- return -1;
-
- var->enable = bcom_eng->regs_base +
- offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]);
- var->fifo = (u32) priv->fifo;
- var->bd_base = tsk->bd_pa;
- var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size);
- var->bd_start = tsk->bd_pa;
- var->buffer_size = priv->maxbufsize;
-
- inc->incr_bytes = -(s16)sizeof(u32);
- inc->incr_dst = sizeof(u32);
-
- /* Reset the BDs */
- tsk->index = 0;
- tsk->outdex = 0;
-
- memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size);
-
- /* Configure some stuff */
- bcom_set_task_pragma(tsk->tasknum, BCOM_GEN_RX_BD_PRAGMA);
- bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum);
-
- out_8(&bcom_eng->regs->ipr[priv->initiator], priv->ipr);
- bcom_set_initiator(tsk->tasknum, priv->initiator);
-
- out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum); /* Clear ints */
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(bcom_gen_bd_rx_reset);
-
-void
-bcom_gen_bd_rx_release(struct bcom_task *tsk)
-{
- /* Nothing special for the GenBD tasks */
- bcom_task_free(tsk);
-}
-EXPORT_SYMBOL_GPL(bcom_gen_bd_rx_release);
-
-
-extern struct bcom_task *
-bcom_gen_bd_tx_init(int queue_len, phys_addr_t fifo,
- int initiator, int ipr)
-{
- struct bcom_task *tsk;
- struct bcom_gen_bd_priv *priv;
-
- tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_gen_bd),
- sizeof(struct bcom_gen_bd_priv));
- if (!tsk)
- return NULL;
-
- tsk->flags = BCOM_FLAGS_NONE;
-
- priv = tsk->priv;
- priv->fifo = fifo;
- priv->initiator = initiator;
- priv->ipr = ipr;
-
- if (bcom_gen_bd_tx_reset(tsk)) {
- bcom_task_free(tsk);
- return NULL;
- }
-
- return tsk;
-}
-EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_init);
-
-int
-bcom_gen_bd_tx_reset(struct bcom_task *tsk)
-{
- struct bcom_gen_bd_priv *priv = tsk->priv;
- struct bcom_gen_bd_tx_var *var;
- struct bcom_gen_bd_tx_inc *inc;
-
- /* Shutdown the task */
- bcom_disable_task(tsk->tasknum);
-
- /* Reset the microcode */
- var = (struct bcom_gen_bd_tx_var *) bcom_task_var(tsk->tasknum);
- inc = (struct bcom_gen_bd_tx_inc *) bcom_task_inc(tsk->tasknum);
-
- if (bcom_load_image(tsk->tasknum, bcom_gen_bd_tx_task))
- return -1;
-
- var->enable = bcom_eng->regs_base +
- offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]);
- var->fifo = (u32) priv->fifo;
- var->bd_base = tsk->bd_pa;
- var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size);
- var->bd_start = tsk->bd_pa;
-
- inc->incr_bytes = -(s16)sizeof(u32);
- inc->incr_src = sizeof(u32);
- inc->incr_src_ma = sizeof(u8);
-
- /* Reset the BDs */
- tsk->index = 0;
- tsk->outdex = 0;
-
- memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size);
-
- /* Configure some stuff */
- bcom_set_task_pragma(tsk->tasknum, BCOM_GEN_TX_BD_PRAGMA);
- bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum);
-
- out_8(&bcom_eng->regs->ipr[priv->initiator], priv->ipr);
- bcom_set_initiator(tsk->tasknum, priv->initiator);
-
- out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum); /* Clear ints */
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_reset);
-
-void
-bcom_gen_bd_tx_release(struct bcom_task *tsk)
-{
- /* Nothing special for the GenBD tasks */
- bcom_task_free(tsk);
-}
-EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_release);
-
-/* ---------------------------------------------------------------------
- * PSC support code
- */
-
-/**
- * bcom_psc_parameters - Bestcomm initialization value table for PSC devices
- *
- * This structure is only used internally. It is a lookup table for PSC
- * specific parameters to bestcomm tasks.
- */
-static struct bcom_psc_params {
- int rx_initiator;
- int rx_ipr;
- int tx_initiator;
- int tx_ipr;
-} bcom_psc_params[] = {
- [0] = {
- .rx_initiator = BCOM_INITIATOR_PSC1_RX,
- .rx_ipr = BCOM_IPR_PSC1_RX,
- .tx_initiator = BCOM_INITIATOR_PSC1_TX,
- .tx_ipr = BCOM_IPR_PSC1_TX,
- },
- [1] = {
- .rx_initiator = BCOM_INITIATOR_PSC2_RX,
- .rx_ipr = BCOM_IPR_PSC2_RX,
- .tx_initiator = BCOM_INITIATOR_PSC2_TX,
- .tx_ipr = BCOM_IPR_PSC2_TX,
- },
- [2] = {
- .rx_initiator = BCOM_INITIATOR_PSC3_RX,
- .rx_ipr = BCOM_IPR_PSC3_RX,
- .tx_initiator = BCOM_INITIATOR_PSC3_TX,
- .tx_ipr = BCOM_IPR_PSC3_TX,
- },
- [3] = {
- .rx_initiator = BCOM_INITIATOR_PSC4_RX,
- .rx_ipr = BCOM_IPR_PSC4_RX,
- .tx_initiator = BCOM_INITIATOR_PSC4_TX,
- .tx_ipr = BCOM_IPR_PSC4_TX,
- },
- [4] = {
- .rx_initiator = BCOM_INITIATOR_PSC5_RX,
- .rx_ipr = BCOM_IPR_PSC5_RX,
- .tx_initiator = BCOM_INITIATOR_PSC5_TX,
- .tx_ipr = BCOM_IPR_PSC5_TX,
- },
- [5] = {
- .rx_initiator = BCOM_INITIATOR_PSC6_RX,
- .rx_ipr = BCOM_IPR_PSC6_RX,
- .tx_initiator = BCOM_INITIATOR_PSC6_TX,
- .tx_ipr = BCOM_IPR_PSC6_TX,
- },
-};
-
-/**
- * bcom_psc_gen_bd_rx_init - Allocate a receive bcom_task for a PSC port
- * @psc_num: Number of the PSC to allocate a task for
- * @queue_len: number of buffer descriptors to allocate for the task
- * @fifo: physical address of FIFO register
- * @maxbufsize: Maximum receive data size in bytes.
- *
- * Allocate a bestcomm task structure for receiving data from a PSC.
- */
-struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len,
- phys_addr_t fifo, int maxbufsize)
-{
- if (psc_num >= MPC52xx_PSC_MAXNUM)
- return NULL;
-
- return bcom_gen_bd_rx_init(queue_len, fifo,
- bcom_psc_params[psc_num].rx_initiator,
- bcom_psc_params[psc_num].rx_ipr,
- maxbufsize);
-}
-EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_rx_init);
-
-/**
- * bcom_psc_gen_bd_tx_init - Allocate a transmit bcom_task for a PSC port
- * @psc_num: Number of the PSC to allocate a task for
- * @queue_len: number of buffer descriptors to allocate for the task
- * @fifo: physical address of FIFO register
- *
- * Allocate a bestcomm task structure for transmitting data to a PSC.
- */
-struct bcom_task *
-bcom_psc_gen_bd_tx_init(unsigned psc_num, int queue_len, phys_addr_t fifo)
-{
- struct psc;
- return bcom_gen_bd_tx_init(queue_len, fifo,
- bcom_psc_params[psc_num].tx_initiator,
- bcom_psc_params[psc_num].tx_ipr);
-}
-EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_tx_init);
-
-
-MODULE_DESCRIPTION("BestComm General Buffer Descriptor tasks driver");
-MODULE_AUTHOR("Jeff Gibbons <jeff.gibbons@appspec.com>");
-MODULE_LICENSE("GPL v2");
-
+++ /dev/null
-/*
- * Header for Bestcomm General Buffer Descriptor tasks driver
- *
- *
- * Copyright (C) 2007 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2006 AppSpec Computer Technologies Corp.
- * Jeff Gibbons <jeff.gibbons@appspec.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- *
- */
-
-#ifndef __BESTCOMM_GEN_BD_H__
-#define __BESTCOMM_GEN_BD_H__
-
-struct bcom_gen_bd {
- u32 status;
- u32 buf_pa;
-};
-
-
-extern struct bcom_task *
-bcom_gen_bd_rx_init(int queue_len, phys_addr_t fifo,
- int initiator, int ipr, int maxbufsize);
-
-extern int
-bcom_gen_bd_rx_reset(struct bcom_task *tsk);
-
-extern void
-bcom_gen_bd_rx_release(struct bcom_task *tsk);
-
-
-extern struct bcom_task *
-bcom_gen_bd_tx_init(int queue_len, phys_addr_t fifo,
- int initiator, int ipr);
-
-extern int
-bcom_gen_bd_tx_reset(struct bcom_task *tsk);
-
-extern void
-bcom_gen_bd_tx_release(struct bcom_task *tsk);
-
-
-/* PSC support utility wrappers */
-struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len,
- phys_addr_t fifo, int maxbufsize);
-struct bcom_task * bcom_psc_gen_bd_tx_init(unsigned psc_num, int queue_len,
- phys_addr_t fifo);
-#endif /* __BESTCOMM_GEN_BD_H__ */
-
+++ /dev/null
-/*
- * Simple memory allocator for on-board SRAM
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Copyright (C) 2005 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/of.h>
-
-#include <asm/io.h>
-#include <asm/mmu.h>
-
-#include "sram.h"
-
-
-/* Struct keeping our 'state' */
-struct bcom_sram *bcom_sram = NULL;
-EXPORT_SYMBOL_GPL(bcom_sram); /* needed for inline functions */
-
-
-/* ======================================================================== */
-/* Public API */
-/* ======================================================================== */
-/* DO NOT USE in interrupts, if needed in irq handler, we should use the
- _irqsave version of the spin_locks */
-
-int bcom_sram_init(struct device_node *sram_node, char *owner)
-{
- int rv;
- const u32 *regaddr_p;
- u64 regaddr64, size64;
- unsigned int psize;
-
- /* Create our state struct */
- if (bcom_sram) {
- printk(KERN_ERR "%s: bcom_sram_init: "
- "Already initialized !\n", owner);
- return -EBUSY;
- }
-
- bcom_sram = kmalloc(sizeof(struct bcom_sram), GFP_KERNEL);
- if (!bcom_sram) {
- printk(KERN_ERR "%s: bcom_sram_init: "
- "Couldn't allocate internal state !\n", owner);
- return -ENOMEM;
- }
-
- /* Get address and size of the sram */
- regaddr_p = of_get_address(sram_node, 0, &size64, NULL);
- if (!regaddr_p) {
- printk(KERN_ERR "%s: bcom_sram_init: "
- "Invalid device node !\n", owner);
- rv = -EINVAL;
- goto error_free;
- }
-
- regaddr64 = of_translate_address(sram_node, regaddr_p);
-
- bcom_sram->base_phys = (phys_addr_t) regaddr64;
- bcom_sram->size = (unsigned int) size64;
-
- /* Request region */
- if (!request_mem_region(bcom_sram->base_phys, bcom_sram->size, owner)) {
- printk(KERN_ERR "%s: bcom_sram_init: "
- "Couldn't request region !\n", owner);
- rv = -EBUSY;
- goto error_free;
- }
-
- /* Map SRAM */
- /* sram is not really __iomem */
- bcom_sram->base_virt = (void*) ioremap(bcom_sram->base_phys, bcom_sram->size);
-
- if (!bcom_sram->base_virt) {
- printk(KERN_ERR "%s: bcom_sram_init: "
- "Map error SRAM zone 0x%08lx (0x%0x)!\n",
- owner, (long)bcom_sram->base_phys, bcom_sram->size );
- rv = -ENOMEM;
- goto error_release;
- }
-
- /* Create an rheap (defaults to 32 bits word alignment) */
- bcom_sram->rh = rh_create(4);
-
- /* Attach the free zones */
-#if 0
- /* Currently disabled ... for future use only */
- reg_addr_p = of_get_property(sram_node, "available", &psize);
-#else
- regaddr_p = NULL;
- psize = 0;
-#endif
-
- if (!regaddr_p || !psize) {
- /* Attach the whole zone */
- rh_attach_region(bcom_sram->rh, 0, bcom_sram->size);
- } else {
- /* Attach each zone independently */
- while (psize >= 2 * sizeof(u32)) {
- phys_addr_t zbase = of_translate_address(sram_node, regaddr_p);
- rh_attach_region(bcom_sram->rh, zbase - bcom_sram->base_phys, regaddr_p[1]);
- regaddr_p += 2;
- psize -= 2 * sizeof(u32);
- }
- }
-
- /* Init our spinlock */
- spin_lock_init(&bcom_sram->lock);
-
- return 0;
-
-error_release:
- release_mem_region(bcom_sram->base_phys, bcom_sram->size);
-error_free:
- kfree(bcom_sram);
- bcom_sram = NULL;
-
- return rv;
-}
-EXPORT_SYMBOL_GPL(bcom_sram_init);
-
-void bcom_sram_cleanup(void)
-{
- /* Free resources */
- if (bcom_sram) {
- rh_destroy(bcom_sram->rh);
- iounmap((void __iomem *)bcom_sram->base_virt);
- release_mem_region(bcom_sram->base_phys, bcom_sram->size);
- kfree(bcom_sram);
- bcom_sram = NULL;
- }
-}
-EXPORT_SYMBOL_GPL(bcom_sram_cleanup);
-
-void* bcom_sram_alloc(int size, int align, phys_addr_t *phys)
-{
- unsigned long offset;
-
- spin_lock(&bcom_sram->lock);
- offset = rh_alloc_align(bcom_sram->rh, size, align, NULL);
- spin_unlock(&bcom_sram->lock);
-
- if (IS_ERR_VALUE(offset))
- return NULL;
-
- *phys = bcom_sram->base_phys + offset;
- return bcom_sram->base_virt + offset;
-}
-EXPORT_SYMBOL_GPL(bcom_sram_alloc);
-
-void bcom_sram_free(void *ptr)
-{
- unsigned long offset;
-
- if (!ptr)
- return;
-
- offset = ptr - bcom_sram->base_virt;
-
- spin_lock(&bcom_sram->lock);
- rh_free(bcom_sram->rh, offset);
- spin_unlock(&bcom_sram->lock);
-}
-EXPORT_SYMBOL_GPL(bcom_sram_free);
-
+++ /dev/null
-/*
- * Handling of a sram zone for bestcomm
- *
- *
- * Copyright (C) 2007 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __BESTCOMM_SRAM_H__
-#define __BESTCOMM_SRAM_H__
-
-#include <asm/rheap.h>
-#include <asm/mmu.h>
-#include <linux/spinlock.h>
-
-
-/* Structure used internally */
- /* The internals are here for the inline functions
- * sake, certainly not for the user to mess with !
- */
-struct bcom_sram {
- phys_addr_t base_phys;
- void *base_virt;
- unsigned int size;
- rh_info_t *rh;
- spinlock_t lock;
-};
-
-extern struct bcom_sram *bcom_sram;
-
-
-/* Public API */
-extern int bcom_sram_init(struct device_node *sram_node, char *owner);
-extern void bcom_sram_cleanup(void);
-
-extern void* bcom_sram_alloc(int size, int align, phys_addr_t *phys);
-extern void bcom_sram_free(void *ptr);
-
-static inline phys_addr_t bcom_sram_va2pa(void *va) {
- return bcom_sram->base_phys +
- (unsigned long)(va - bcom_sram->base_virt);
-}
-
-static inline void *bcom_sram_pa2va(phys_addr_t pa) {
- return bcom_sram->base_virt +
- (unsigned long)(pa - bcom_sram->base_phys);
-}
-
-
-#endif /* __BESTCOMM_SRAM_H__ */
-
obj-y += amba/
# Many drivers will want to use DMA so this has to be made available
# really early.
-obj-$(CONFIG_DMA_ENGINE) += dma/
+obj-$(CONFIG_DMADEVICES) += dma/
obj-$(CONFIG_VIRTIO) += virtio/
obj-$(CONFIG_XEN) += xen/
#include <asm/prom.h>
#include <asm/mpc52xx.h>
-#include <sysdev/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/bestcomm_priv.h>
-#include <sysdev/bestcomm/ata.h>
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/ata.h>
#define DRV_NAME "mpc52xx_ata"
---help---
Enable support for the Freescale MPC512x built-in DMA engine.
+source "drivers/dma/bestcomm/Kconfig"
+
config MV_XOR
bool "Marvell XOR engine support"
depends on PLAT_ORION
obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
obj-$(CONFIG_FSL_DMA) += fsldma.o
obj-$(CONFIG_MPC512X_DMA) += mpc512x_dma.o
+obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
obj-$(CONFIG_MV_XOR) += mv_xor.o
obj-$(CONFIG_DW_DMAC) += dw_dmac.o
obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
--- /dev/null
+#
+# Kconfig options for Bestcomm
+#
+
+config PPC_BESTCOMM
+ tristate "Bestcomm DMA engine support"
+ depends on PPC_MPC52xx
+ default n
+ select PPC_LIB_RHEAP
+ help
+ BestComm is the name of the communication coprocessor found
+ on the Freescale MPC5200 family of processor. Its usage is
+ optional for some drivers (like ATA), but required for
+ others (like FEC).
+
+ If you want to use drivers that require DMA operations,
+ answer Y or M. Otherwise say N.
+
+config PPC_BESTCOMM_ATA
+ tristate
+ depends on PPC_BESTCOMM
+ help
+ This option enables the support for the ATA task.
+
+config PPC_BESTCOMM_FEC
+ tristate
+ depends on PPC_BESTCOMM
+ help
+ This option enables the support for the FEC tasks.
+
+config PPC_BESTCOMM_GEN_BD
+ tristate
+ depends on PPC_BESTCOMM
+ help
+ This option enables the support for the GenBD tasks.
+
--- /dev/null
+#
+# Makefile for BestComm & co
+#
+
+bestcomm-core-objs := bestcomm.o sram.o
+bestcomm-ata-objs := ata.o bcom_ata_task.o
+bestcomm-fec-objs := fec.o bcom_fec_rx_task.o bcom_fec_tx_task.o
+bestcomm-gen-bd-objs := gen_bd.o bcom_gen_bd_rx_task.o bcom_gen_bd_tx_task.o
+
+obj-$(CONFIG_PPC_BESTCOMM) += bestcomm-core.o
+obj-$(CONFIG_PPC_BESTCOMM_ATA) += bestcomm-ata.o
+obj-$(CONFIG_PPC_BESTCOMM_FEC) += bestcomm-fec.o
+obj-$(CONFIG_PPC_BESTCOMM_GEN_BD) += bestcomm-gen-bd.o
+
--- /dev/null
+/*
+ * Bestcomm ATA task driver
+ *
+ *
+ * Patterned after bestcomm/fec.c by Dale Farnsworth <dfarnsworth@mvista.com>
+ * 2003-2004 (c) MontaVista, Software, Inc.
+ *
+ * Copyright (C) 2006-2007 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2006 Freescale - John Rigby
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/ata.h>
+
+
+/* ======================================================================== */
+/* Task image/var/inc */
+/* ======================================================================== */
+
+/* ata task image */
+extern u32 bcom_ata_task[];
+
+/* ata task vars that need to be set before enabling the task */
+struct bcom_ata_var {
+ u32 enable; /* (u16*) address of task's control register */
+ u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */
+ u32 bd_last; /* (struct bcom_bd*) end of ring buffer */
+ u32 bd_start; /* (struct bcom_bd*) current bd */
+ u32 buffer_size; /* size of receive buffer */
+};
+
+/* ata task incs that need to be set before enabling the task */
+struct bcom_ata_inc {
+ u16 pad0;
+ s16 incr_bytes;
+ u16 pad1;
+ s16 incr_dst;
+ u16 pad2;
+ s16 incr_src;
+};
+
+
+/* ======================================================================== */
+/* Task support code */
+/* ======================================================================== */
+
+struct bcom_task *
+bcom_ata_init(int queue_len, int maxbufsize)
+{
+ struct bcom_task *tsk;
+ struct bcom_ata_var *var;
+ struct bcom_ata_inc *inc;
+
+ /* Prefetch breaks ATA DMA. Turn it off for ATA DMA */
+ bcom_disable_prefetch();
+
+ tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_ata_bd), 0);
+ if (!tsk)
+ return NULL;
+
+ tsk->flags = BCOM_FLAGS_NONE;
+
+ bcom_ata_reset_bd(tsk);
+
+ var = (struct bcom_ata_var *) bcom_task_var(tsk->tasknum);
+ inc = (struct bcom_ata_inc *) bcom_task_inc(tsk->tasknum);
+
+ if (bcom_load_image(tsk->tasknum, bcom_ata_task)) {
+ bcom_task_free(tsk);
+ return NULL;
+ }
+
+ var->enable = bcom_eng->regs_base +
+ offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]);
+ var->bd_base = tsk->bd_pa;
+ var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size);
+ var->bd_start = tsk->bd_pa;
+ var->buffer_size = maxbufsize;
+
+ /* Configure some stuff */
+ bcom_set_task_pragma(tsk->tasknum, BCOM_ATA_PRAGMA);
+ bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum);
+
+ out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_ATA_RX], BCOM_IPR_ATA_RX);
+ out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_ATA_TX], BCOM_IPR_ATA_TX);
+
+ out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum); /* Clear ints */
+
+ return tsk;
+}
+EXPORT_SYMBOL_GPL(bcom_ata_init);
+
+void bcom_ata_rx_prepare(struct bcom_task *tsk)
+{
+ struct bcom_ata_inc *inc;
+
+ inc = (struct bcom_ata_inc *) bcom_task_inc(tsk->tasknum);
+
+ inc->incr_bytes = -(s16)sizeof(u32);
+ inc->incr_src = 0;
+ inc->incr_dst = sizeof(u32);
+
+ bcom_set_initiator(tsk->tasknum, BCOM_INITIATOR_ATA_RX);
+}
+EXPORT_SYMBOL_GPL(bcom_ata_rx_prepare);
+
+void bcom_ata_tx_prepare(struct bcom_task *tsk)
+{
+ struct bcom_ata_inc *inc;
+
+ inc = (struct bcom_ata_inc *) bcom_task_inc(tsk->tasknum);
+
+ inc->incr_bytes = -(s16)sizeof(u32);
+ inc->incr_src = sizeof(u32);
+ inc->incr_dst = 0;
+
+ bcom_set_initiator(tsk->tasknum, BCOM_INITIATOR_ATA_TX);
+}
+EXPORT_SYMBOL_GPL(bcom_ata_tx_prepare);
+
+void bcom_ata_reset_bd(struct bcom_task *tsk)
+{
+ struct bcom_ata_var *var;
+
+ /* Reset all BD */
+ memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size);
+
+ tsk->index = 0;
+ tsk->outdex = 0;
+
+ var = (struct bcom_ata_var *) bcom_task_var(tsk->tasknum);
+ var->bd_start = var->bd_base;
+}
+EXPORT_SYMBOL_GPL(bcom_ata_reset_bd);
+
+void bcom_ata_release(struct bcom_task *tsk)
+{
+ /* Nothing special for the ATA tasks */
+ bcom_task_free(tsk);
+}
+EXPORT_SYMBOL_GPL(bcom_ata_release);
+
+
+MODULE_DESCRIPTION("BestComm ATA task driver");
+MODULE_AUTHOR("John Rigby");
+MODULE_LICENSE("GPL v2");
+
--- /dev/null
+/*
+ * Bestcomm ATA task microcode
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Created based on bestcom/code_dma/image_rtos1/dma_image.hex
+ */
+
+#include <asm/types.h>
+
+/*
+ * The header consists of the following fields:
+ * u32 magic;
+ * u8 desc_size;
+ * u8 var_size;
+ * u8 inc_size;
+ * u8 first_var;
+ * u8 reserved[8];
+ *
+ * The size fields contain the number of 32-bit words.
+ */
+
+u32 bcom_ata_task[] = {
+ /* header */
+ 0x4243544b,
+ 0x0e060709,
+ 0x00000000,
+ 0x00000000,
+
+ /* Task descriptors */
+ 0x8198009b, /* LCD: idx0 = var3; idx0 <= var2; idx0 += inc3 */
+ 0x13e00c08, /* DRD1A: var3 = var1; FN=0 MORE init=31 WS=0 RS=0 */
+ 0xb8000264, /* LCD: idx1 = *idx0, idx2 = var0; idx1 < var9; idx1 += inc4, idx2 += inc4 */
+ 0x10000f00, /* DRD1A: var3 = idx0; FN=0 MORE init=0 WS=0 RS=0 */
+ 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */
+ 0x0c8cfc8a, /* DRD2B1: *idx2 = EU3(); EU3(*idx2,var10) */
+ 0xd8988240, /* LCDEXT: idx1 = idx1; idx1 > var9; idx1 += inc0 */
+ 0xf845e011, /* LCDEXT: idx2 = *(idx0 + var00000015); ; idx2 += inc2 */
+ 0xb845e00a, /* LCD: idx3 = *(idx0 + var00000019); ; idx3 += inc1 */
+ 0x0bfecf90, /* DRD1A: *idx3 = *idx2; FN=0 TFD init=31 WS=3 RS=3 */
+ 0x9898802d, /* LCD: idx1 = idx1; idx1 once var0; idx1 += inc5 */
+ 0x64000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 INT EXT init=0 WS=0 RS=0 */
+ 0x0c0cf849, /* DRD2B1: *idx0 = EU3(); EU3(idx1,var9) */
+ 0x000001f8, /* NOP */
+
+ /* VAR[9]-VAR[14] */
+ 0x40000000,
+ 0x7fff7fff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+
+ /* INC[0]-INC[6] */
+ 0x40000000,
+ 0xe0000000,
+ 0xe0000000,
+ 0xa000000c,
+ 0x20000000,
+ 0x00000000,
+ 0x00000000,
+};
+
--- /dev/null
+/*
+ * Bestcomm FEC RX task microcode
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Automatically created based on BestCommAPI-2.2/code_dma/image_rtos1/dma_image.hex
+ * on Tue Mar 22 11:19:38 2005 GMT
+ */
+
+#include <asm/types.h>
+
+/*
+ * The header consists of the following fields:
+ * u32 magic;
+ * u8 desc_size;
+ * u8 var_size;
+ * u8 inc_size;
+ * u8 first_var;
+ * u8 reserved[8];
+ *
+ * The size fields contain the number of 32-bit words.
+ */
+
+u32 bcom_fec_rx_task[] = {
+ /* header */
+ 0x4243544b,
+ 0x18060709,
+ 0x00000000,
+ 0x00000000,
+
+ /* Task descriptors */
+ 0x808220e3, /* LCD: idx0 = var1, idx1 = var4; idx1 <= var3; idx0 += inc4, idx1 += inc3 */
+ 0x10601010, /* DRD1A: var4 = var2; FN=0 MORE init=3 WS=0 RS=0 */
+ 0xb8800264, /* LCD: idx2 = *idx1, idx3 = var0; idx2 < var9; idx2 += inc4, idx3 += inc4 */
+ 0x10001308, /* DRD1A: var4 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
+ 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */
+ 0x0cccfcca, /* DRD2B1: *idx3 = EU3(); EU3(*idx3,var10) */
+ 0x80004000, /* LCDEXT: idx2 = 0x00000000; ; */
+ 0xb8c58029, /* LCD: idx3 = *(idx1 + var00000015); idx3 once var0; idx3 += inc5 */
+ 0x60000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=0 RS=0 */
+ 0x088cf8cc, /* DRD2B1: idx2 = EU3(); EU3(idx3,var12) */
+ 0x991982f2, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var11; idx2 += inc6, idx3 += inc2 */
+ 0x006acf80, /* DRD1A: *idx3 = *idx0; FN=0 init=3 WS=1 RS=1 */
+ 0x80004000, /* LCDEXT: idx2 = 0x00000000; ; */
+ 0x9999802d, /* LCD: idx3 = idx3; idx3 once var0; idx3 += inc5 */
+ 0x70000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */
+ 0x034cfc4e, /* DRD2B1: var13 = EU3(); EU3(*idx1,var14) */
+ 0x00008868, /* DRD1A: idx2 = var13; FN=0 init=0 WS=0 RS=0 */
+ 0x99198341, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var13; idx2 += inc0, idx3 += inc1 */
+ 0x007ecf80, /* DRD1A: *idx3 = *idx0; FN=0 init=3 WS=3 RS=3 */
+ 0x99198272, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var9; idx2 += inc6, idx3 += inc2 */
+ 0x046acf80, /* DRD1A: *idx3 = *idx0; FN=0 INT init=3 WS=1 RS=1 */
+ 0x9819002d, /* LCD: idx2 = idx0; idx2 once var0; idx2 += inc5 */
+ 0x0060c790, /* DRD1A: *idx1 = *idx2; FN=0 init=3 WS=0 RS=0 */
+ 0x000001f8, /* NOP */
+
+ /* VAR[9]-VAR[14] */
+ 0x40000000,
+ 0x7fff7fff,
+ 0x00000000,
+ 0x00000003,
+ 0x40000008,
+ 0x43ffffff,
+
+ /* INC[0]-INC[6] */
+ 0x40000000,
+ 0xe0000000,
+ 0xe0000000,
+ 0xa0000008,
+ 0x20000000,
+ 0x00000000,
+ 0x4000ffff,
+};
+
--- /dev/null
+/*
+ * Bestcomm FEC TX task microcode
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Automatically created based on BestCommAPI-2.2/code_dma/image_rtos1/dma_image.hex
+ * on Tue Mar 22 11:19:29 2005 GMT
+ */
+
+#include <asm/types.h>
+
+/*
+ * The header consists of the following fields:
+ * u32 magic;
+ * u8 desc_size;
+ * u8 var_size;
+ * u8 inc_size;
+ * u8 first_var;
+ * u8 reserved[8];
+ *
+ * The size fields contain the number of 32-bit words.
+ */
+
+u32 bcom_fec_tx_task[] = {
+ /* header */
+ 0x4243544b,
+ 0x2407070d,
+ 0x00000000,
+ 0x00000000,
+
+ /* Task descriptors */
+ 0x8018001b, /* LCD: idx0 = var0; idx0 <= var0; idx0 += inc3 */
+ 0x60000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */
+ 0x01ccfc0d, /* DRD2B1: var7 = EU3(); EU3(*idx0,var13) */
+ 0x8082a123, /* LCD: idx0 = var1, idx1 = var5; idx1 <= var4; idx0 += inc4, idx1 += inc3 */
+ 0x10801418, /* DRD1A: var5 = var3; FN=0 MORE init=4 WS=0 RS=0 */
+ 0xf88103a4, /* LCDEXT: idx2 = *idx1, idx3 = var2; idx2 < var14; idx2 += inc4, idx3 += inc4 */
+ 0x801a6024, /* LCD: idx4 = var0; ; idx4 += inc4 */
+ 0x10001708, /* DRD1A: var5 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
+ 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */
+ 0x0cccfccf, /* DRD2B1: *idx3 = EU3(); EU3(*idx3,var15) */
+ 0x991a002c, /* LCD: idx2 = idx2, idx3 = idx4; idx2 once var0; idx2 += inc5, idx3 += inc4 */
+ 0x70000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */
+ 0x024cfc4d, /* DRD2B1: var9 = EU3(); EU3(*idx1,var13) */
+ 0x60000003, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */
+ 0x0cccf247, /* DRD2B1: *idx3 = EU3(); EU3(var9,var7) */
+ 0x80004000, /* LCDEXT: idx2 = 0x00000000; ; */
+ 0xb8c80029, /* LCD: idx3 = *(idx1 + var0000001a); idx3 once var0; idx3 += inc5 */
+ 0x70000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */
+ 0x088cf8d1, /* DRD2B1: idx2 = EU3(); EU3(idx3,var17) */
+ 0x00002f10, /* DRD1A: var11 = idx2; FN=0 init=0 WS=0 RS=0 */
+ 0x99198432, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var16; idx2 += inc6, idx3 += inc2 */
+ 0x008ac398, /* DRD1A: *idx0 = *idx3; FN=0 init=4 WS=1 RS=1 */
+ 0x80004000, /* LCDEXT: idx2 = 0x00000000; ; */
+ 0x9999802d, /* LCD: idx3 = idx3; idx3 once var0; idx3 += inc5 */
+ 0x70000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */
+ 0x048cfc53, /* DRD2B1: var18 = EU3(); EU3(*idx1,var19) */
+ 0x60000008, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=8 EXT init=0 WS=0 RS=0 */
+ 0x088cf48b, /* DRD2B1: idx2 = EU3(); EU3(var18,var11) */
+ 0x99198481, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var18; idx2 += inc0, idx3 += inc1 */
+ 0x009ec398, /* DRD1A: *idx0 = *idx3; FN=0 init=4 WS=3 RS=3 */
+ 0x991983b2, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var14; idx2 += inc6, idx3 += inc2 */
+ 0x088ac398, /* DRD1A: *idx0 = *idx3; FN=0 TFD init=4 WS=1 RS=1 */
+ 0x9919002d, /* LCD: idx2 = idx2; idx2 once var0; idx2 += inc5 */
+ 0x60000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */
+ 0x0c4cf88e, /* DRD2B1: *idx1 = EU3(); EU3(idx2,var14) */
+ 0x000001f8, /* NOP */
+
+ /* VAR[13]-VAR[19] */
+ 0x0c000000,
+ 0x40000000,
+ 0x7fff7fff,
+ 0x00000000,
+ 0x00000003,
+ 0x40000004,
+ 0x43ffffff,
+
+ /* INC[0]-INC[6] */
+ 0x40000000,
+ 0xe0000000,
+ 0xe0000000,
+ 0xa0000008,
+ 0x20000000,
+ 0x00000000,
+ 0x4000ffff,
+};
+
--- /dev/null
+/*
+ * Bestcomm GenBD RX task microcode
+ *
+ * Copyright (C) 2006 AppSpec Computer Technologies Corp.
+ * Jeff Gibbons <jeff.gibbons@appspec.com>
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Based on BestCommAPI-2.2/code_dma/image_rtos1/dma_image.hex
+ * on Tue Mar 4 10:14:12 2006 GMT
+ *
+ */
+
+#include <asm/types.h>
+
+/*
+ * The header consists of the following fields:
+ * u32 magic;
+ * u8 desc_size;
+ * u8 var_size;
+ * u8 inc_size;
+ * u8 first_var;
+ * u8 reserved[8];
+ *
+ * The size fields contain the number of 32-bit words.
+ */
+
+u32 bcom_gen_bd_rx_task[] = {
+ /* header */
+ 0x4243544b,
+ 0x0d020409,
+ 0x00000000,
+ 0x00000000,
+
+ /* Task descriptors */
+ 0x808220da, /* LCD: idx0 = var1, idx1 = var4; idx1 <= var3; idx0 += inc3, idx1 += inc2 */
+ 0x13e01010, /* DRD1A: var4 = var2; FN=0 MORE init=31 WS=0 RS=0 */
+ 0xb880025b, /* LCD: idx2 = *idx1, idx3 = var0; idx2 < var9; idx2 += inc3, idx3 += inc3 */
+ 0x10001308, /* DRD1A: var4 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
+ 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */
+ 0x0cccfcca, /* DRD2B1: *idx3 = EU3(); EU3(*idx3,var10) */
+ 0xd9190240, /* LCDEXT: idx2 = idx2; idx2 > var9; idx2 += inc0 */
+ 0xb8c5e009, /* LCD: idx3 = *(idx1 + var00000015); ; idx3 += inc1 */
+ 0x07fecf80, /* DRD1A: *idx3 = *idx0; FN=0 INT init=31 WS=3 RS=3 */
+ 0x99190024, /* LCD: idx2 = idx2; idx2 once var0; idx2 += inc4 */
+ 0x60000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */
+ 0x0c4cf889, /* DRD2B1: *idx1 = EU3(); EU3(idx2,var9) */
+ 0x000001f8, /* NOP */
+
+ /* VAR[9]-VAR[10] */
+ 0x40000000,
+ 0x7fff7fff,
+
+ /* INC[0]-INC[3] */
+ 0x40000000,
+ 0xe0000000,
+ 0xa0000008,
+ 0x20000000,
+};
+
--- /dev/null
+/*
+ * Bestcomm GenBD TX task microcode
+ *
+ * Copyright (C) 2006 AppSpec Computer Technologies Corp.
+ * Jeff Gibbons <jeff.gibbons@appspec.com>
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Based on BestCommAPI-2.2/code_dma/image_rtos1/dma_image.hex
+ * on Tue Mar 4 10:14:12 2006 GMT
+ *
+ */
+
+#include <asm/types.h>
+
+/*
+ * The header consists of the following fields:
+ * u32 magic;
+ * u8 desc_size;
+ * u8 var_size;
+ * u8 inc_size;
+ * u8 first_var;
+ * u8 reserved[8];
+ *
+ * The size fields contain the number of 32-bit words.
+ */
+
+u32 bcom_gen_bd_tx_task[] = {
+ /* header */
+ 0x4243544b,
+ 0x0f040609,
+ 0x00000000,
+ 0x00000000,
+
+ /* Task descriptors */
+ 0x800220e3, /* LCD: idx0 = var0, idx1 = var4; idx1 <= var3; idx0 += inc4, idx1 += inc3 */
+ 0x13e01010, /* DRD1A: var4 = var2; FN=0 MORE init=31 WS=0 RS=0 */
+ 0xb8808264, /* LCD: idx2 = *idx1, idx3 = var1; idx2 < var9; idx2 += inc4, idx3 += inc4 */
+ 0x10001308, /* DRD1A: var4 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
+ 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */
+ 0x0cccfcca, /* DRD2B1: *idx3 = EU3(); EU3(*idx3,var10) */
+ 0xd9190300, /* LCDEXT: idx2 = idx2; idx2 > var12; idx2 += inc0 */
+ 0xb8c5e009, /* LCD: idx3 = *(idx1 + var00000015); ; idx3 += inc1 */
+ 0x03fec398, /* DRD1A: *idx0 = *idx3; FN=0 init=31 WS=3 RS=3 */
+ 0x9919826a, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var9; idx2 += inc5, idx3 += inc2 */
+ 0x0feac398, /* DRD1A: *idx0 = *idx3; FN=0 TFD INT init=31 WS=1 RS=1 */
+ 0x99190036, /* LCD: idx2 = idx2; idx2 once var0; idx2 += inc6 */
+ 0x60000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */
+ 0x0c4cf889, /* DRD2B1: *idx1 = EU3(); EU3(idx2,var9) */
+ 0x000001f8, /* NOP */
+
+ /* VAR[9]-VAR[12] */
+ 0x40000000,
+ 0x7fff7fff,
+ 0x00000000,
+ 0x40000004,
+
+ /* INC[0]-INC[5] */
+ 0x40000000,
+ 0xe0000000,
+ 0xe0000000,
+ 0xa0000008,
+ 0x20000000,
+ 0x4000ffff,
+};
+
--- /dev/null
+/*
+ * Driver for MPC52xx processor BestComm peripheral controller
+ *
+ *
+ * Copyright (C) 2006-2007 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2005 Varma Electronics Oy,
+ * ( by Andrey Volkov <avolkov@varma-el.com> )
+ * Copyright (C) 2003-2004 MontaVista, Software, Inc.
+ * ( by Dale Farnsworth <dfarnsworth@mvista.com> )
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mpc52xx.h>
+
+#include <linux/fsl/bestcomm/sram.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include "linux/fsl/bestcomm/bestcomm.h"
+
+#define DRIVER_NAME "bestcomm-core"
+
+/* MPC5200 device tree match tables */
+static struct of_device_id mpc52xx_sram_ids[] __devinitdata = {
+ { .compatible = "fsl,mpc5200-sram", },
+ { .compatible = "mpc5200-sram", },
+ {}
+};
+
+
+struct bcom_engine *bcom_eng = NULL;
+EXPORT_SYMBOL_GPL(bcom_eng); /* needed for inline functions */
+
+/* ======================================================================== */
+/* Public and private API */
+/* ======================================================================== */
+
+/* Private API */
+
+struct bcom_task *
+bcom_task_alloc(int bd_count, int bd_size, int priv_size)
+{
+ int i, tasknum = -1;
+ struct bcom_task *tsk;
+
+ /* Don't try to do anything if bestcomm init failed */
+ if (!bcom_eng)
+ return NULL;
+
+ /* Get and reserve a task num */
+ spin_lock(&bcom_eng->lock);
+
+ for (i=0; i<BCOM_MAX_TASKS; i++)
+ if (!bcom_eng->tdt[i].stop) { /* we use stop as a marker */
+ bcom_eng->tdt[i].stop = 0xfffffffful; /* dummy addr */
+ tasknum = i;
+ break;
+ }
+
+ spin_unlock(&bcom_eng->lock);
+
+ if (tasknum < 0)
+ return NULL;
+
+ /* Allocate our structure */
+ tsk = kzalloc(sizeof(struct bcom_task) + priv_size, GFP_KERNEL);
+ if (!tsk)
+ goto error;
+
+ tsk->tasknum = tasknum;
+ if (priv_size)
+ tsk->priv = (void*)tsk + sizeof(struct bcom_task);
+
+ /* Get IRQ of that task */
+ tsk->irq = irq_of_parse_and_map(bcom_eng->ofnode, tsk->tasknum);
+ if (tsk->irq == NO_IRQ)
+ goto error;
+
+ /* Init the BDs, if needed */
+ if (bd_count) {
+ tsk->cookie = kmalloc(sizeof(void*) * bd_count, GFP_KERNEL);
+ if (!tsk->cookie)
+ goto error;
+
+ tsk->bd = bcom_sram_alloc(bd_count * bd_size, 4, &tsk->bd_pa);
+ if (!tsk->bd)
+ goto error;
+ memset(tsk->bd, 0x00, bd_count * bd_size);
+
+ tsk->num_bd = bd_count;
+ tsk->bd_size = bd_size;
+ }
+
+ return tsk;
+
+error:
+ if (tsk) {
+ if (tsk->irq != NO_IRQ)
+ irq_dispose_mapping(tsk->irq);
+ bcom_sram_free(tsk->bd);
+ kfree(tsk->cookie);
+ kfree(tsk);
+ }
+
+ bcom_eng->tdt[tasknum].stop = 0;
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(bcom_task_alloc);
+
+void
+bcom_task_free(struct bcom_task *tsk)
+{
+ /* Stop the task */
+ bcom_disable_task(tsk->tasknum);
+
+ /* Clear TDT */
+ bcom_eng->tdt[tsk->tasknum].start = 0;
+ bcom_eng->tdt[tsk->tasknum].stop = 0;
+
+ /* Free everything */
+ irq_dispose_mapping(tsk->irq);
+ bcom_sram_free(tsk->bd);
+ kfree(tsk->cookie);
+ kfree(tsk);
+}
+EXPORT_SYMBOL_GPL(bcom_task_free);
+
+int
+bcom_load_image(int task, u32 *task_image)
+{
+ struct bcom_task_header *hdr = (struct bcom_task_header *)task_image;
+ struct bcom_tdt *tdt;
+ u32 *desc, *var, *inc;
+ u32 *desc_src, *var_src, *inc_src;
+
+ /* Safety checks */
+ if (hdr->magic != BCOM_TASK_MAGIC) {
+ printk(KERN_ERR DRIVER_NAME
+ ": Trying to load invalid microcode\n");
+ return -EINVAL;
+ }
+
+ if ((task < 0) || (task >= BCOM_MAX_TASKS)) {
+ printk(KERN_ERR DRIVER_NAME
+ ": Trying to load invalid task %d\n", task);
+ return -EINVAL;
+ }
+
+ /* Initial load or reload */
+ tdt = &bcom_eng->tdt[task];
+
+ if (tdt->start) {
+ desc = bcom_task_desc(task);
+ if (hdr->desc_size != bcom_task_num_descs(task)) {
+ printk(KERN_ERR DRIVER_NAME
+ ": Trying to reload wrong task image "
+ "(%d size %d/%d)!\n",
+ task,
+ hdr->desc_size,
+ bcom_task_num_descs(task));
+ return -EINVAL;
+ }
+ } else {
+ phys_addr_t start_pa;
+
+ desc = bcom_sram_alloc(hdr->desc_size * sizeof(u32), 4, &start_pa);
+ if (!desc)
+ return -ENOMEM;
+
+ tdt->start = start_pa;
+ tdt->stop = start_pa + ((hdr->desc_size-1) * sizeof(u32));
+ }
+
+ var = bcom_task_var(task);
+ inc = bcom_task_inc(task);
+
+ /* Clear & copy */
+ memset(var, 0x00, BCOM_VAR_SIZE);
+ memset(inc, 0x00, BCOM_INC_SIZE);
+
+ desc_src = (u32 *)(hdr + 1);
+ var_src = desc_src + hdr->desc_size;
+ inc_src = var_src + hdr->var_size;
+
+ memcpy(desc, desc_src, hdr->desc_size * sizeof(u32));
+ memcpy(var + hdr->first_var, var_src, hdr->var_size * sizeof(u32));
+ memcpy(inc, inc_src, hdr->inc_size * sizeof(u32));
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcom_load_image);
+
+void
+bcom_set_initiator(int task, int initiator)
+{
+ int i;
+ int num_descs;
+ u32 *desc;
+ int next_drd_has_initiator;
+
+ bcom_set_tcr_initiator(task, initiator);
+
+ /* Just setting tcr is apparently not enough due to some problem */
+ /* with it. So we just go thru all the microcode and replace in */
+ /* the DRD directly */
+
+ desc = bcom_task_desc(task);
+ next_drd_has_initiator = 1;
+ num_descs = bcom_task_num_descs(task);
+
+ for (i=0; i<num_descs; i++, desc++) {
+ if (!bcom_desc_is_drd(*desc))
+ continue;
+ if (next_drd_has_initiator)
+ if (bcom_desc_initiator(*desc) != BCOM_INITIATOR_ALWAYS)
+ bcom_set_desc_initiator(desc, initiator);
+ next_drd_has_initiator = !bcom_drd_is_extended(*desc);
+ }
+}
+EXPORT_SYMBOL_GPL(bcom_set_initiator);
+
+
+/* Public API */
+
+void
+bcom_enable(struct bcom_task *tsk)
+{
+ bcom_enable_task(tsk->tasknum);
+}
+EXPORT_SYMBOL_GPL(bcom_enable);
+
+void
+bcom_disable(struct bcom_task *tsk)
+{
+ bcom_disable_task(tsk->tasknum);
+}
+EXPORT_SYMBOL_GPL(bcom_disable);
+
+
+/* ======================================================================== */
+/* Engine init/cleanup */
+/* ======================================================================== */
+
+/* Function Descriptor table */
+/* this will need to be updated if Freescale changes their task code FDT */
+static u32 fdt_ops[] = {
+ 0xa0045670, /* FDT[48] - load_acc() */
+ 0x80045670, /* FDT[49] - unload_acc() */
+ 0x21800000, /* FDT[50] - and() */
+ 0x21e00000, /* FDT[51] - or() */
+ 0x21500000, /* FDT[52] - xor() */
+ 0x21400000, /* FDT[53] - andn() */
+ 0x21500000, /* FDT[54] - not() */
+ 0x20400000, /* FDT[55] - add() */
+ 0x20500000, /* FDT[56] - sub() */
+ 0x20800000, /* FDT[57] - lsh() */
+ 0x20a00000, /* FDT[58] - rsh() */
+ 0xc0170000, /* FDT[59] - crc8() */
+ 0xc0145670, /* FDT[60] - crc16() */
+ 0xc0345670, /* FDT[61] - crc32() */
+ 0xa0076540, /* FDT[62] - endian32() */
+ 0xa0000760, /* FDT[63] - endian16() */
+};
+
+
+static int __devinit
+bcom_engine_init(void)
+{
+ int task;
+ phys_addr_t tdt_pa, ctx_pa, var_pa, fdt_pa;
+ unsigned int tdt_size, ctx_size, var_size, fdt_size;
+
+ /* Allocate & clear SRAM zones for FDT, TDTs, contexts and vars/incs */
+ tdt_size = BCOM_MAX_TASKS * sizeof(struct bcom_tdt);
+ ctx_size = BCOM_MAX_TASKS * BCOM_CTX_SIZE;
+ var_size = BCOM_MAX_TASKS * (BCOM_VAR_SIZE + BCOM_INC_SIZE);
+ fdt_size = BCOM_FDT_SIZE;
+
+ bcom_eng->tdt = bcom_sram_alloc(tdt_size, sizeof(u32), &tdt_pa);
+ bcom_eng->ctx = bcom_sram_alloc(ctx_size, BCOM_CTX_ALIGN, &ctx_pa);
+ bcom_eng->var = bcom_sram_alloc(var_size, BCOM_VAR_ALIGN, &var_pa);
+ bcom_eng->fdt = bcom_sram_alloc(fdt_size, BCOM_FDT_ALIGN, &fdt_pa);
+
+ if (!bcom_eng->tdt || !bcom_eng->ctx || !bcom_eng->var || !bcom_eng->fdt) {
+ printk(KERN_ERR "DMA: SRAM alloc failed in engine init !\n");
+
+ bcom_sram_free(bcom_eng->tdt);
+ bcom_sram_free(bcom_eng->ctx);
+ bcom_sram_free(bcom_eng->var);
+ bcom_sram_free(bcom_eng->fdt);
+
+ return -ENOMEM;
+ }
+
+ memset(bcom_eng->tdt, 0x00, tdt_size);
+ memset(bcom_eng->ctx, 0x00, ctx_size);
+ memset(bcom_eng->var, 0x00, var_size);
+ memset(bcom_eng->fdt, 0x00, fdt_size);
+
+ /* Copy the FDT for the EU#3 */
+ memcpy(&bcom_eng->fdt[48], fdt_ops, sizeof(fdt_ops));
+
+ /* Initialize Task base structure */
+ for (task=0; task<BCOM_MAX_TASKS; task++)
+ {
+ out_be16(&bcom_eng->regs->tcr[task], 0);
+ out_8(&bcom_eng->regs->ipr[task], 0);
+
+ bcom_eng->tdt[task].context = ctx_pa;
+ bcom_eng->tdt[task].var = var_pa;
+ bcom_eng->tdt[task].fdt = fdt_pa;
+
+ var_pa += BCOM_VAR_SIZE + BCOM_INC_SIZE;
+ ctx_pa += BCOM_CTX_SIZE;
+ }
+
+ out_be32(&bcom_eng->regs->taskBar, tdt_pa);
+
+ /* Init 'always' initiator */
+ out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_ALWAYS], BCOM_IPR_ALWAYS);
+
+ /* Disable COMM Bus Prefetch on the original 5200; it's broken */
+ if ((mfspr(SPRN_SVR) & MPC5200_SVR_MASK) == MPC5200_SVR)
+ bcom_disable_prefetch();
+
+ /* Init lock */
+ spin_lock_init(&bcom_eng->lock);
+
+ return 0;
+}
+
+static void
+bcom_engine_cleanup(void)
+{
+ int task;
+
+ /* Stop all tasks */
+ for (task=0; task<BCOM_MAX_TASKS; task++)
+ {
+ out_be16(&bcom_eng->regs->tcr[task], 0);
+ out_8(&bcom_eng->regs->ipr[task], 0);
+ }
+
+ out_be32(&bcom_eng->regs->taskBar, 0ul);
+
+ /* Release the SRAM zones */
+ bcom_sram_free(bcom_eng->tdt);
+ bcom_sram_free(bcom_eng->ctx);
+ bcom_sram_free(bcom_eng->var);
+ bcom_sram_free(bcom_eng->fdt);
+}
+
+
+/* ======================================================================== */
+/* OF platform driver */
+/* ======================================================================== */
+
+static int __devinit mpc52xx_bcom_probe(struct platform_device *op)
+{
+ struct device_node *ofn_sram;
+ struct resource res_bcom;
+
+ int rv;
+
+ /* Inform user we're ok so far */
+ printk(KERN_INFO "DMA: MPC52xx BestComm driver\n");
+
+ /* Get the bestcomm node */
+ of_node_get(op->dev.of_node);
+
+ /* Prepare SRAM */
+ ofn_sram = of_find_matching_node(NULL, mpc52xx_sram_ids);
+ if (!ofn_sram) {
+ printk(KERN_ERR DRIVER_NAME ": "
+ "No SRAM found in device tree\n");
+ rv = -ENODEV;
+ goto error_ofput;
+ }
+ rv = bcom_sram_init(ofn_sram, DRIVER_NAME);
+ of_node_put(ofn_sram);
+
+ if (rv) {
+ printk(KERN_ERR DRIVER_NAME ": "
+ "Error in SRAM init\n");
+ goto error_ofput;
+ }
+
+ /* Get a clean struct */
+ bcom_eng = kzalloc(sizeof(struct bcom_engine), GFP_KERNEL);
+ if (!bcom_eng) {
+ printk(KERN_ERR DRIVER_NAME ": "
+ "Can't allocate state structure\n");
+ rv = -ENOMEM;
+ goto error_sramclean;
+ }
+
+ /* Save the node */
+ bcom_eng->ofnode = op->dev.of_node;
+
+ /* Get, reserve & map io */
+ if (of_address_to_resource(op->dev.of_node, 0, &res_bcom)) {
+ printk(KERN_ERR DRIVER_NAME ": "
+ "Can't get resource\n");
+ rv = -EINVAL;
+ goto error_sramclean;
+ }
+
+ if (!request_mem_region(res_bcom.start, sizeof(struct mpc52xx_sdma),
+ DRIVER_NAME)) {
+ printk(KERN_ERR DRIVER_NAME ": "
+ "Can't request registers region\n");
+ rv = -EBUSY;
+ goto error_sramclean;
+ }
+
+ bcom_eng->regs_base = res_bcom.start;
+ bcom_eng->regs = ioremap(res_bcom.start, sizeof(struct mpc52xx_sdma));
+ if (!bcom_eng->regs) {
+ printk(KERN_ERR DRIVER_NAME ": "
+ "Can't map registers\n");
+ rv = -ENOMEM;
+ goto error_release;
+ }
+
+ /* Now, do the real init */
+ rv = bcom_engine_init();
+ if (rv)
+ goto error_unmap;
+
+ /* Done ! */
+ printk(KERN_INFO "DMA: MPC52xx BestComm engine @%08lx ok !\n",
+ (long)bcom_eng->regs_base);
+
+ return 0;
+
+ /* Error path */
+error_unmap:
+ iounmap(bcom_eng->regs);
+error_release:
+ release_mem_region(res_bcom.start, sizeof(struct mpc52xx_sdma));
+error_sramclean:
+ kfree(bcom_eng);
+ bcom_sram_cleanup();
+error_ofput:
+ of_node_put(op->dev.of_node);
+
+ printk(KERN_ERR "DMA: MPC52xx BestComm init failed !\n");
+
+ return rv;
+}
+
+
+static int mpc52xx_bcom_remove(struct platform_device *op)
+{
+ /* Clean up the engine */
+ bcom_engine_cleanup();
+
+ /* Cleanup SRAM */
+ bcom_sram_cleanup();
+
+ /* Release regs */
+ iounmap(bcom_eng->regs);
+ release_mem_region(bcom_eng->regs_base, sizeof(struct mpc52xx_sdma));
+
+ /* Release the node */
+ of_node_put(bcom_eng->ofnode);
+
+ /* Release memory */
+ kfree(bcom_eng);
+ bcom_eng = NULL;
+
+ return 0;
+}
+
+static struct of_device_id mpc52xx_bcom_of_match[] = {
+ { .compatible = "fsl,mpc5200-bestcomm", },
+ { .compatible = "mpc5200-bestcomm", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, mpc52xx_bcom_of_match);
+
+
+static struct platform_driver mpc52xx_bcom_of_platform_driver = {
+ .probe = mpc52xx_bcom_probe,
+ .remove = mpc52xx_bcom_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = mpc52xx_bcom_of_match,
+ },
+};
+
+
+/* ======================================================================== */
+/* Module */
+/* ======================================================================== */
+
+static int __init
+mpc52xx_bcom_init(void)
+{
+ return platform_driver_register(&mpc52xx_bcom_of_platform_driver);
+}
+
+static void __exit
+mpc52xx_bcom_exit(void)
+{
+ platform_driver_unregister(&mpc52xx_bcom_of_platform_driver);
+}
+
+/* If we're not a module, we must make sure everything is setup before */
+/* anyone tries to use us ... that's why we use subsys_initcall instead */
+/* of module_init. */
+subsys_initcall(mpc52xx_bcom_init);
+module_exit(mpc52xx_bcom_exit);
+
+MODULE_DESCRIPTION("Freescale MPC52xx BestComm DMA");
+MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>");
+MODULE_AUTHOR("Andrey Volkov <avolkov@varma-el.com>");
+MODULE_AUTHOR("Dale Farnsworth <dfarnsworth@mvista.com>");
+MODULE_LICENSE("GPL v2");
+
--- /dev/null
+/*
+ * Bestcomm FEC tasks driver
+ *
+ *
+ * Copyright (C) 2006-2007 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003-2004 MontaVista, Software, Inc.
+ * ( by Dale Farnsworth <dfarnsworth@mvista.com> )
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/fec.h>
+
+
+/* ======================================================================== */
+/* Task image/var/inc */
+/* ======================================================================== */
+
+/* fec tasks images */
+extern u32 bcom_fec_rx_task[];
+extern u32 bcom_fec_tx_task[];
+
+/* rx task vars that need to be set before enabling the task */
+struct bcom_fec_rx_var {
+ u32 enable; /* (u16*) address of task's control register */
+ u32 fifo; /* (u32*) address of fec's fifo */
+ u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */
+ u32 bd_last; /* (struct bcom_bd*) end of ring buffer */
+ u32 bd_start; /* (struct bcom_bd*) current bd */
+ u32 buffer_size; /* size of receive buffer */
+};
+
+/* rx task incs that need to be set before enabling the task */
+struct bcom_fec_rx_inc {
+ u16 pad0;
+ s16 incr_bytes;
+ u16 pad1;
+ s16 incr_dst;
+ u16 pad2;
+ s16 incr_dst_ma;
+};
+
+/* tx task vars that need to be set before enabling the task */
+struct bcom_fec_tx_var {
+ u32 DRD; /* (u32*) address of self-modified DRD */
+ u32 fifo; /* (u32*) address of fec's fifo */
+ u32 enable; /* (u16*) address of task's control register */
+ u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */
+ u32 bd_last; /* (struct bcom_bd*) end of ring buffer */
+ u32 bd_start; /* (struct bcom_bd*) current bd */
+ u32 buffer_size; /* set by uCode for each packet */
+};
+
+/* tx task incs that need to be set before enabling the task */
+struct bcom_fec_tx_inc {
+ u16 pad0;
+ s16 incr_bytes;
+ u16 pad1;
+ s16 incr_src;
+ u16 pad2;
+ s16 incr_src_ma;
+};
+
+/* private structure in the task */
+struct bcom_fec_priv {
+ phys_addr_t fifo;
+ int maxbufsize;
+};
+
+
+/* ======================================================================== */
+/* Task support code */
+/* ======================================================================== */
+
+struct bcom_task *
+bcom_fec_rx_init(int queue_len, phys_addr_t fifo, int maxbufsize)
+{
+ struct bcom_task *tsk;
+ struct bcom_fec_priv *priv;
+
+ tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_fec_bd),
+ sizeof(struct bcom_fec_priv));
+ if (!tsk)
+ return NULL;
+
+ tsk->flags = BCOM_FLAGS_NONE;
+
+ priv = tsk->priv;
+ priv->fifo = fifo;
+ priv->maxbufsize = maxbufsize;
+
+ if (bcom_fec_rx_reset(tsk)) {
+ bcom_task_free(tsk);
+ return NULL;
+ }
+
+ return tsk;
+}
+EXPORT_SYMBOL_GPL(bcom_fec_rx_init);
+
+int
+bcom_fec_rx_reset(struct bcom_task *tsk)
+{
+ struct bcom_fec_priv *priv = tsk->priv;
+ struct bcom_fec_rx_var *var;
+ struct bcom_fec_rx_inc *inc;
+
+ /* Shutdown the task */
+ bcom_disable_task(tsk->tasknum);
+
+ /* Reset the microcode */
+ var = (struct bcom_fec_rx_var *) bcom_task_var(tsk->tasknum);
+ inc = (struct bcom_fec_rx_inc *) bcom_task_inc(tsk->tasknum);
+
+ if (bcom_load_image(tsk->tasknum, bcom_fec_rx_task))
+ return -1;
+
+ var->enable = bcom_eng->regs_base +
+ offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]);
+ var->fifo = (u32) priv->fifo;
+ var->bd_base = tsk->bd_pa;
+ var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size);
+ var->bd_start = tsk->bd_pa;
+ var->buffer_size = priv->maxbufsize;
+
+ inc->incr_bytes = -(s16)sizeof(u32); /* These should be in the */
+ inc->incr_dst = sizeof(u32); /* task image, but we stick */
+ inc->incr_dst_ma= sizeof(u8); /* to the official ones */
+
+ /* Reset the BDs */
+ tsk->index = 0;
+ tsk->outdex = 0;
+
+ memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size);
+
+ /* Configure some stuff */
+ bcom_set_task_pragma(tsk->tasknum, BCOM_FEC_RX_BD_PRAGMA);
+ bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum);
+
+ out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_FEC_RX], BCOM_IPR_FEC_RX);
+
+ out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum); /* Clear ints */
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcom_fec_rx_reset);
+
+void
+bcom_fec_rx_release(struct bcom_task *tsk)
+{
+ /* Nothing special for the FEC tasks */
+ bcom_task_free(tsk);
+}
+EXPORT_SYMBOL_GPL(bcom_fec_rx_release);
+
+
+
+ /* Return 2nd to last DRD */
+ /* This is an ugly hack, but at least it's only done
+ once at initialization */
+static u32 *self_modified_drd(int tasknum)
+{
+ u32 *desc;
+ int num_descs;
+ int drd_count;
+ int i;
+
+ num_descs = bcom_task_num_descs(tasknum);
+ desc = bcom_task_desc(tasknum) + num_descs - 1;
+ drd_count = 0;
+ for (i=0; i<num_descs; i++, desc--)
+ if (bcom_desc_is_drd(*desc) && ++drd_count == 3)
+ break;
+ return desc;
+}
+
+struct bcom_task *
+bcom_fec_tx_init(int queue_len, phys_addr_t fifo)
+{
+ struct bcom_task *tsk;
+ struct bcom_fec_priv *priv;
+
+ tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_fec_bd),
+ sizeof(struct bcom_fec_priv));
+ if (!tsk)
+ return NULL;
+
+ tsk->flags = BCOM_FLAGS_ENABLE_TASK;
+
+ priv = tsk->priv;
+ priv->fifo = fifo;
+
+ if (bcom_fec_tx_reset(tsk)) {
+ bcom_task_free(tsk);
+ return NULL;
+ }
+
+ return tsk;
+}
+EXPORT_SYMBOL_GPL(bcom_fec_tx_init);
+
+int
+bcom_fec_tx_reset(struct bcom_task *tsk)
+{
+ struct bcom_fec_priv *priv = tsk->priv;
+ struct bcom_fec_tx_var *var;
+ struct bcom_fec_tx_inc *inc;
+
+ /* Shutdown the task */
+ bcom_disable_task(tsk->tasknum);
+
+ /* Reset the microcode */
+ var = (struct bcom_fec_tx_var *) bcom_task_var(tsk->tasknum);
+ inc = (struct bcom_fec_tx_inc *) bcom_task_inc(tsk->tasknum);
+
+ if (bcom_load_image(tsk->tasknum, bcom_fec_tx_task))
+ return -1;
+
+ var->enable = bcom_eng->regs_base +
+ offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]);
+ var->fifo = (u32) priv->fifo;
+ var->DRD = bcom_sram_va2pa(self_modified_drd(tsk->tasknum));
+ var->bd_base = tsk->bd_pa;
+ var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size);
+ var->bd_start = tsk->bd_pa;
+
+ inc->incr_bytes = -(s16)sizeof(u32); /* These should be in the */
+ inc->incr_src = sizeof(u32); /* task image, but we stick */
+ inc->incr_src_ma= sizeof(u8); /* to the official ones */
+
+ /* Reset the BDs */
+ tsk->index = 0;
+ tsk->outdex = 0;
+
+ memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size);
+
+ /* Configure some stuff */
+ bcom_set_task_pragma(tsk->tasknum, BCOM_FEC_TX_BD_PRAGMA);
+ bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum);
+
+ out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_FEC_TX], BCOM_IPR_FEC_TX);
+
+ out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum); /* Clear ints */
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcom_fec_tx_reset);
+
+void
+bcom_fec_tx_release(struct bcom_task *tsk)
+{
+ /* Nothing special for the FEC tasks */
+ bcom_task_free(tsk);
+}
+EXPORT_SYMBOL_GPL(bcom_fec_tx_release);
+
+
+MODULE_DESCRIPTION("BestComm FEC tasks driver");
+MODULE_AUTHOR("Dale Farnsworth <dfarnsworth@mvista.com>");
+MODULE_LICENSE("GPL v2");
+
--- /dev/null
+/*
+ * Driver for MPC52xx processor BestComm General Buffer Descriptor
+ *
+ * Copyright (C) 2007 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2006 AppSpec Computer Technologies Corp.
+ * Jeff Gibbons <jeff.gibbons@appspec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+
+#include <asm/mpc52xx.h>
+#include <asm/mpc52xx_psc.h>
+
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/gen_bd.h>
+
+
+/* ======================================================================== */
+/* Task image/var/inc */
+/* ======================================================================== */
+
+/* gen_bd tasks images */
+extern u32 bcom_gen_bd_rx_task[];
+extern u32 bcom_gen_bd_tx_task[];
+
+/* rx task vars that need to be set before enabling the task */
+struct bcom_gen_bd_rx_var {
+ u32 enable; /* (u16*) address of task's control register */
+ u32 fifo; /* (u32*) address of gen_bd's fifo */
+ u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */
+ u32 bd_last; /* (struct bcom_bd*) end of ring buffer */
+ u32 bd_start; /* (struct bcom_bd*) current bd */
+ u32 buffer_size; /* size of receive buffer */
+};
+
+/* rx task incs that need to be set before enabling the task */
+struct bcom_gen_bd_rx_inc {
+ u16 pad0;
+ s16 incr_bytes;
+ u16 pad1;
+ s16 incr_dst;
+};
+
+/* tx task vars that need to be set before enabling the task */
+struct bcom_gen_bd_tx_var {
+ u32 fifo; /* (u32*) address of gen_bd's fifo */
+ u32 enable; /* (u16*) address of task's control register */
+ u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */
+ u32 bd_last; /* (struct bcom_bd*) end of ring buffer */
+ u32 bd_start; /* (struct bcom_bd*) current bd */
+ u32 buffer_size; /* set by uCode for each packet */
+};
+
+/* tx task incs that need to be set before enabling the task */
+struct bcom_gen_bd_tx_inc {
+ u16 pad0;
+ s16 incr_bytes;
+ u16 pad1;
+ s16 incr_src;
+ u16 pad2;
+ s16 incr_src_ma;
+};
+
+/* private structure */
+struct bcom_gen_bd_priv {
+ phys_addr_t fifo;
+ int initiator;
+ int ipr;
+ int maxbufsize;
+};
+
+
+/* ======================================================================== */
+/* Task support code */
+/* ======================================================================== */
+
+struct bcom_task *
+bcom_gen_bd_rx_init(int queue_len, phys_addr_t fifo,
+ int initiator, int ipr, int maxbufsize)
+{
+ struct bcom_task *tsk;
+ struct bcom_gen_bd_priv *priv;
+
+ tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_gen_bd),
+ sizeof(struct bcom_gen_bd_priv));
+ if (!tsk)
+ return NULL;
+
+ tsk->flags = BCOM_FLAGS_NONE;
+
+ priv = tsk->priv;
+ priv->fifo = fifo;
+ priv->initiator = initiator;
+ priv->ipr = ipr;
+ priv->maxbufsize = maxbufsize;
+
+ if (bcom_gen_bd_rx_reset(tsk)) {
+ bcom_task_free(tsk);
+ return NULL;
+ }
+
+ return tsk;
+}
+EXPORT_SYMBOL_GPL(bcom_gen_bd_rx_init);
+
+int
+bcom_gen_bd_rx_reset(struct bcom_task *tsk)
+{
+ struct bcom_gen_bd_priv *priv = tsk->priv;
+ struct bcom_gen_bd_rx_var *var;
+ struct bcom_gen_bd_rx_inc *inc;
+
+ /* Shutdown the task */
+ bcom_disable_task(tsk->tasknum);
+
+ /* Reset the microcode */
+ var = (struct bcom_gen_bd_rx_var *) bcom_task_var(tsk->tasknum);
+ inc = (struct bcom_gen_bd_rx_inc *) bcom_task_inc(tsk->tasknum);
+
+ if (bcom_load_image(tsk->tasknum, bcom_gen_bd_rx_task))
+ return -1;
+
+ var->enable = bcom_eng->regs_base +
+ offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]);
+ var->fifo = (u32) priv->fifo;
+ var->bd_base = tsk->bd_pa;
+ var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size);
+ var->bd_start = tsk->bd_pa;
+ var->buffer_size = priv->maxbufsize;
+
+ inc->incr_bytes = -(s16)sizeof(u32);
+ inc->incr_dst = sizeof(u32);
+
+ /* Reset the BDs */
+ tsk->index = 0;
+ tsk->outdex = 0;
+
+ memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size);
+
+ /* Configure some stuff */
+ bcom_set_task_pragma(tsk->tasknum, BCOM_GEN_RX_BD_PRAGMA);
+ bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum);
+
+ out_8(&bcom_eng->regs->ipr[priv->initiator], priv->ipr);
+ bcom_set_initiator(tsk->tasknum, priv->initiator);
+
+ out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum); /* Clear ints */
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcom_gen_bd_rx_reset);
+
+void
+bcom_gen_bd_rx_release(struct bcom_task *tsk)
+{
+ /* Nothing special for the GenBD tasks */
+ bcom_task_free(tsk);
+}
+EXPORT_SYMBOL_GPL(bcom_gen_bd_rx_release);
+
+
+extern struct bcom_task *
+bcom_gen_bd_tx_init(int queue_len, phys_addr_t fifo,
+ int initiator, int ipr)
+{
+ struct bcom_task *tsk;
+ struct bcom_gen_bd_priv *priv;
+
+ tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_gen_bd),
+ sizeof(struct bcom_gen_bd_priv));
+ if (!tsk)
+ return NULL;
+
+ tsk->flags = BCOM_FLAGS_NONE;
+
+ priv = tsk->priv;
+ priv->fifo = fifo;
+ priv->initiator = initiator;
+ priv->ipr = ipr;
+
+ if (bcom_gen_bd_tx_reset(tsk)) {
+ bcom_task_free(tsk);
+ return NULL;
+ }
+
+ return tsk;
+}
+EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_init);
+
+int
+bcom_gen_bd_tx_reset(struct bcom_task *tsk)
+{
+ struct bcom_gen_bd_priv *priv = tsk->priv;
+ struct bcom_gen_bd_tx_var *var;
+ struct bcom_gen_bd_tx_inc *inc;
+
+ /* Shutdown the task */
+ bcom_disable_task(tsk->tasknum);
+
+ /* Reset the microcode */
+ var = (struct bcom_gen_bd_tx_var *) bcom_task_var(tsk->tasknum);
+ inc = (struct bcom_gen_bd_tx_inc *) bcom_task_inc(tsk->tasknum);
+
+ if (bcom_load_image(tsk->tasknum, bcom_gen_bd_tx_task))
+ return -1;
+
+ var->enable = bcom_eng->regs_base +
+ offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]);
+ var->fifo = (u32) priv->fifo;
+ var->bd_base = tsk->bd_pa;
+ var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size);
+ var->bd_start = tsk->bd_pa;
+
+ inc->incr_bytes = -(s16)sizeof(u32);
+ inc->incr_src = sizeof(u32);
+ inc->incr_src_ma = sizeof(u8);
+
+ /* Reset the BDs */
+ tsk->index = 0;
+ tsk->outdex = 0;
+
+ memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size);
+
+ /* Configure some stuff */
+ bcom_set_task_pragma(tsk->tasknum, BCOM_GEN_TX_BD_PRAGMA);
+ bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum);
+
+ out_8(&bcom_eng->regs->ipr[priv->initiator], priv->ipr);
+ bcom_set_initiator(tsk->tasknum, priv->initiator);
+
+ out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum); /* Clear ints */
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_reset);
+
+void
+bcom_gen_bd_tx_release(struct bcom_task *tsk)
+{
+ /* Nothing special for the GenBD tasks */
+ bcom_task_free(tsk);
+}
+EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_release);
+
+/* ---------------------------------------------------------------------
+ * PSC support code
+ */
+
+/**
+ * bcom_psc_parameters - Bestcomm initialization value table for PSC devices
+ *
+ * This structure is only used internally. It is a lookup table for PSC
+ * specific parameters to bestcomm tasks.
+ */
+static struct bcom_psc_params {
+ int rx_initiator;
+ int rx_ipr;
+ int tx_initiator;
+ int tx_ipr;
+} bcom_psc_params[] = {
+ [0] = {
+ .rx_initiator = BCOM_INITIATOR_PSC1_RX,
+ .rx_ipr = BCOM_IPR_PSC1_RX,
+ .tx_initiator = BCOM_INITIATOR_PSC1_TX,
+ .tx_ipr = BCOM_IPR_PSC1_TX,
+ },
+ [1] = {
+ .rx_initiator = BCOM_INITIATOR_PSC2_RX,
+ .rx_ipr = BCOM_IPR_PSC2_RX,
+ .tx_initiator = BCOM_INITIATOR_PSC2_TX,
+ .tx_ipr = BCOM_IPR_PSC2_TX,
+ },
+ [2] = {
+ .rx_initiator = BCOM_INITIATOR_PSC3_RX,
+ .rx_ipr = BCOM_IPR_PSC3_RX,
+ .tx_initiator = BCOM_INITIATOR_PSC3_TX,
+ .tx_ipr = BCOM_IPR_PSC3_TX,
+ },
+ [3] = {
+ .rx_initiator = BCOM_INITIATOR_PSC4_RX,
+ .rx_ipr = BCOM_IPR_PSC4_RX,
+ .tx_initiator = BCOM_INITIATOR_PSC4_TX,
+ .tx_ipr = BCOM_IPR_PSC4_TX,
+ },
+ [4] = {
+ .rx_initiator = BCOM_INITIATOR_PSC5_RX,
+ .rx_ipr = BCOM_IPR_PSC5_RX,
+ .tx_initiator = BCOM_INITIATOR_PSC5_TX,
+ .tx_ipr = BCOM_IPR_PSC5_TX,
+ },
+ [5] = {
+ .rx_initiator = BCOM_INITIATOR_PSC6_RX,
+ .rx_ipr = BCOM_IPR_PSC6_RX,
+ .tx_initiator = BCOM_INITIATOR_PSC6_TX,
+ .tx_ipr = BCOM_IPR_PSC6_TX,
+ },
+};
+
+/**
+ * bcom_psc_gen_bd_rx_init - Allocate a receive bcom_task for a PSC port
+ * @psc_num: Number of the PSC to allocate a task for
+ * @queue_len: number of buffer descriptors to allocate for the task
+ * @fifo: physical address of FIFO register
+ * @maxbufsize: Maximum receive data size in bytes.
+ *
+ * Allocate a bestcomm task structure for receiving data from a PSC.
+ */
+struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len,
+ phys_addr_t fifo, int maxbufsize)
+{
+ if (psc_num >= MPC52xx_PSC_MAXNUM)
+ return NULL;
+
+ return bcom_gen_bd_rx_init(queue_len, fifo,
+ bcom_psc_params[psc_num].rx_initiator,
+ bcom_psc_params[psc_num].rx_ipr,
+ maxbufsize);
+}
+EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_rx_init);
+
+/**
+ * bcom_psc_gen_bd_tx_init - Allocate a transmit bcom_task for a PSC port
+ * @psc_num: Number of the PSC to allocate a task for
+ * @queue_len: number of buffer descriptors to allocate for the task
+ * @fifo: physical address of FIFO register
+ *
+ * Allocate a bestcomm task structure for transmitting data to a PSC.
+ */
+struct bcom_task *
+bcom_psc_gen_bd_tx_init(unsigned psc_num, int queue_len, phys_addr_t fifo)
+{
+ struct psc;
+ return bcom_gen_bd_tx_init(queue_len, fifo,
+ bcom_psc_params[psc_num].tx_initiator,
+ bcom_psc_params[psc_num].tx_ipr);
+}
+EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_tx_init);
+
+
+MODULE_DESCRIPTION("BestComm General Buffer Descriptor tasks driver");
+MODULE_AUTHOR("Jeff Gibbons <jeff.gibbons@appspec.com>");
+MODULE_LICENSE("GPL v2");
+
--- /dev/null
+/*
+ * Simple memory allocator for on-board SRAM
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Copyright (C) 2005 Sylvain Munaut <tnt@246tNt.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+
+#include <asm/io.h>
+#include <asm/mmu.h>
+
+#include <linux/fsl/bestcomm/sram.h>
+
+
+/* Struct keeping our 'state' */
+struct bcom_sram *bcom_sram = NULL;
+EXPORT_SYMBOL_GPL(bcom_sram); /* needed for inline functions */
+
+
+/* ======================================================================== */
+/* Public API */
+/* ======================================================================== */
+/* DO NOT USE in interrupts, if needed in irq handler, we should use the
+ _irqsave version of the spin_locks */
+
+int bcom_sram_init(struct device_node *sram_node, char *owner)
+{
+ int rv;
+ const u32 *regaddr_p;
+ u64 regaddr64, size64;
+ unsigned int psize;
+
+ /* Create our state struct */
+ if (bcom_sram) {
+ printk(KERN_ERR "%s: bcom_sram_init: "
+ "Already initialized !\n", owner);
+ return -EBUSY;
+ }
+
+ bcom_sram = kmalloc(sizeof(struct bcom_sram), GFP_KERNEL);
+ if (!bcom_sram) {
+ printk(KERN_ERR "%s: bcom_sram_init: "
+ "Couldn't allocate internal state !\n", owner);
+ return -ENOMEM;
+ }
+
+ /* Get address and size of the sram */
+ regaddr_p = of_get_address(sram_node, 0, &size64, NULL);
+ if (!regaddr_p) {
+ printk(KERN_ERR "%s: bcom_sram_init: "
+ "Invalid device node !\n", owner);
+ rv = -EINVAL;
+ goto error_free;
+ }
+
+ regaddr64 = of_translate_address(sram_node, regaddr_p);
+
+ bcom_sram->base_phys = (phys_addr_t) regaddr64;
+ bcom_sram->size = (unsigned int) size64;
+
+ /* Request region */
+ if (!request_mem_region(bcom_sram->base_phys, bcom_sram->size, owner)) {
+ printk(KERN_ERR "%s: bcom_sram_init: "
+ "Couldn't request region !\n", owner);
+ rv = -EBUSY;
+ goto error_free;
+ }
+
+ /* Map SRAM */
+ /* sram is not really __iomem */
+ bcom_sram->base_virt = (void*) ioremap(bcom_sram->base_phys, bcom_sram->size);
+
+ if (!bcom_sram->base_virt) {
+ printk(KERN_ERR "%s: bcom_sram_init: "
+ "Map error SRAM zone 0x%08lx (0x%0x)!\n",
+ owner, (long)bcom_sram->base_phys, bcom_sram->size );
+ rv = -ENOMEM;
+ goto error_release;
+ }
+
+ /* Create an rheap (defaults to 32 bits word alignment) */
+ bcom_sram->rh = rh_create(4);
+
+ /* Attach the free zones */
+#if 0
+ /* Currently disabled ... for future use only */
+ reg_addr_p = of_get_property(sram_node, "available", &psize);
+#else
+ regaddr_p = NULL;
+ psize = 0;
+#endif
+
+ if (!regaddr_p || !psize) {
+ /* Attach the whole zone */
+ rh_attach_region(bcom_sram->rh, 0, bcom_sram->size);
+ } else {
+ /* Attach each zone independently */
+ while (psize >= 2 * sizeof(u32)) {
+ phys_addr_t zbase = of_translate_address(sram_node, regaddr_p);
+ rh_attach_region(bcom_sram->rh, zbase - bcom_sram->base_phys, regaddr_p[1]);
+ regaddr_p += 2;
+ psize -= 2 * sizeof(u32);
+ }
+ }
+
+ /* Init our spinlock */
+ spin_lock_init(&bcom_sram->lock);
+
+ return 0;
+
+error_release:
+ release_mem_region(bcom_sram->base_phys, bcom_sram->size);
+error_free:
+ kfree(bcom_sram);
+ bcom_sram = NULL;
+
+ return rv;
+}
+EXPORT_SYMBOL_GPL(bcom_sram_init);
+
+void bcom_sram_cleanup(void)
+{
+ /* Free resources */
+ if (bcom_sram) {
+ rh_destroy(bcom_sram->rh);
+ iounmap((void __iomem *)bcom_sram->base_virt);
+ release_mem_region(bcom_sram->base_phys, bcom_sram->size);
+ kfree(bcom_sram);
+ bcom_sram = NULL;
+ }
+}
+EXPORT_SYMBOL_GPL(bcom_sram_cleanup);
+
+void* bcom_sram_alloc(int size, int align, phys_addr_t *phys)
+{
+ unsigned long offset;
+
+ spin_lock(&bcom_sram->lock);
+ offset = rh_alloc_align(bcom_sram->rh, size, align, NULL);
+ spin_unlock(&bcom_sram->lock);
+
+ if (IS_ERR_VALUE(offset))
+ return NULL;
+
+ *phys = bcom_sram->base_phys + offset;
+ return bcom_sram->base_virt + offset;
+}
+EXPORT_SYMBOL_GPL(bcom_sram_alloc);
+
+void bcom_sram_free(void *ptr)
+{
+ unsigned long offset;
+
+ if (!ptr)
+ return;
+
+ offset = ptr - bcom_sram->base_virt;
+
+ spin_lock(&bcom_sram->lock);
+ rh_free(bcom_sram->rh, offset);
+ spin_unlock(&bcom_sram->lock);
+}
+EXPORT_SYMBOL_GPL(bcom_sram_free);
+
#include <asm/delay.h>
#include <asm/mpc52xx.h>
-#include <sysdev/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/fec.h>
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/fec.h>
#include "fec_mpc52xx.h"
--- /dev/null
+/*
+ * Header for Bestcomm ATA task driver
+ *
+ *
+ * Copyright (C) 2006 Freescale - John Rigby
+ * Copyright (C) 2006 Sylvain Munaut <tnt@246tNt.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __BESTCOMM_ATA_H__
+#define __BESTCOMM_ATA_H__
+
+
+struct bcom_ata_bd {
+ u32 status;
+ u32 src_pa;
+ u32 dst_pa;
+};
+
+extern struct bcom_task * bcom_ata_init(int queue_len, int maxbufsize);
+extern void bcom_ata_rx_prepare(struct bcom_task *tsk);
+extern void bcom_ata_tx_prepare(struct bcom_task *tsk);
+extern void bcom_ata_reset_bd(struct bcom_task *tsk);
+extern void bcom_ata_release(struct bcom_task *tsk);
+
+#endif /* __BESTCOMM_ATA_H__ */
+
--- /dev/null
+/*
+ * Public header for the MPC52xx processor BestComm driver
+ *
+ *
+ * Copyright (C) 2006 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2005 Varma Electronics Oy,
+ * ( by Andrey Volkov <avolkov@varma-el.com> )
+ * Copyright (C) 2003-2004 MontaVista, Software, Inc.
+ * ( by Dale Farnsworth <dfarnsworth@mvista.com> )
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __BESTCOMM_H__
+#define __BESTCOMM_H__
+
+/**
+ * struct bcom_bd - Structure describing a generic BestComm buffer descriptor
+ * @status: The current status of this buffer. Exact meaning depends on the
+ * task type
+ * @data: An array of u32 extra data. Size of array is task dependent.
+ *
+ * Note: Don't dereference a bcom_bd pointer as an array. The size of the
+ * bcom_bd is variable. Use bcom_get_bd() instead.
+ */
+struct bcom_bd {
+ u32 status;
+ u32 data[0]; /* variable payload size */
+};
+
+/* ======================================================================== */
+/* Generic task management */
+/* ======================================================================== */
+
+/**
+ * struct bcom_task - Structure describing a loaded BestComm task
+ *
+ * This structure is never built by the driver it self. It's built and
+ * filled the intermediate layer of the BestComm API, the task dependent
+ * support code.
+ *
+ * Most likely you don't need to poke around inside this structure. The
+ * fields are exposed in the header just for the sake of inline functions
+ */
+struct bcom_task {
+ unsigned int tasknum;
+ unsigned int flags;
+ int irq;
+
+ struct bcom_bd *bd;
+ phys_addr_t bd_pa;
+ void **cookie;
+ unsigned short index;
+ unsigned short outdex;
+ unsigned int num_bd;
+ unsigned int bd_size;
+
+ void* priv;
+};
+
+#define BCOM_FLAGS_NONE 0x00000000ul
+#define BCOM_FLAGS_ENABLE_TASK (1ul << 0)
+
+/**
+ * bcom_enable - Enable a BestComm task
+ * @tsk: The BestComm task structure
+ *
+ * This function makes sure the given task is enabled and can be run
+ * by the BestComm engine as needed
+ */
+extern void bcom_enable(struct bcom_task *tsk);
+
+/**
+ * bcom_disable - Disable a BestComm task
+ * @tsk: The BestComm task structure
+ *
+ * This function disable a given task, making sure it's not executed
+ * by the BestComm engine.
+ */
+extern void bcom_disable(struct bcom_task *tsk);
+
+
+/**
+ * bcom_get_task_irq - Returns the irq number of a BestComm task
+ * @tsk: The BestComm task structure
+ */
+static inline int
+bcom_get_task_irq(struct bcom_task *tsk) {
+ return tsk->irq;
+}
+
+/* ======================================================================== */
+/* BD based tasks helpers */
+/* ======================================================================== */
+
+#define BCOM_BD_READY 0x40000000ul
+
+/** _bcom_next_index - Get next input index.
+ * @tsk: pointer to task structure
+ *
+ * Support function; Device drivers should not call this
+ */
+static inline int
+_bcom_next_index(struct bcom_task *tsk)
+{
+ return ((tsk->index + 1) == tsk->num_bd) ? 0 : tsk->index + 1;
+}
+
+/** _bcom_next_outdex - Get next output index.
+ * @tsk: pointer to task structure
+ *
+ * Support function; Device drivers should not call this
+ */
+static inline int
+_bcom_next_outdex(struct bcom_task *tsk)
+{
+ return ((tsk->outdex + 1) == tsk->num_bd) ? 0 : tsk->outdex + 1;
+}
+
+/**
+ * bcom_queue_empty - Checks if a BestComm task BD queue is empty
+ * @tsk: The BestComm task structure
+ */
+static inline int
+bcom_queue_empty(struct bcom_task *tsk)
+{
+ return tsk->index == tsk->outdex;
+}
+
+/**
+ * bcom_queue_full - Checks if a BestComm task BD queue is full
+ * @tsk: The BestComm task structure
+ */
+static inline int
+bcom_queue_full(struct bcom_task *tsk)
+{
+ return tsk->outdex == _bcom_next_index(tsk);
+}
+
+/**
+ * bcom_get_bd - Get a BD from the queue
+ * @tsk: The BestComm task structure
+ * index: Index of the BD to fetch
+ */
+static inline struct bcom_bd
+*bcom_get_bd(struct bcom_task *tsk, unsigned int index)
+{
+ /* A cast to (void*) so the address can be incremented by the
+ * real size instead of by sizeof(struct bcom_bd) */
+ return ((void *)tsk->bd) + (index * tsk->bd_size);
+}
+
+/**
+ * bcom_buffer_done - Checks if a BestComm
+ * @tsk: The BestComm task structure
+ */
+static inline int
+bcom_buffer_done(struct bcom_task *tsk)
+{
+ struct bcom_bd *bd;
+ if (bcom_queue_empty(tsk))
+ return 0;
+
+ bd = bcom_get_bd(tsk, tsk->outdex);
+ return !(bd->status & BCOM_BD_READY);
+}
+
+/**
+ * bcom_prepare_next_buffer - clear status of next available buffer.
+ * @tsk: The BestComm task structure
+ *
+ * Returns pointer to next buffer descriptor
+ */
+static inline struct bcom_bd *
+bcom_prepare_next_buffer(struct bcom_task *tsk)
+{
+ struct bcom_bd *bd;
+
+ bd = bcom_get_bd(tsk, tsk->index);
+ bd->status = 0; /* cleanup last status */
+ return bd;
+}
+
+static inline void
+bcom_submit_next_buffer(struct bcom_task *tsk, void *cookie)
+{
+ struct bcom_bd *bd = bcom_get_bd(tsk, tsk->index);
+
+ tsk->cookie[tsk->index] = cookie;
+ mb(); /* ensure the bd is really up-to-date */
+ bd->status |= BCOM_BD_READY;
+ tsk->index = _bcom_next_index(tsk);
+ if (tsk->flags & BCOM_FLAGS_ENABLE_TASK)
+ bcom_enable(tsk);
+}
+
+static inline void *
+bcom_retrieve_buffer(struct bcom_task *tsk, u32 *p_status, struct bcom_bd **p_bd)
+{
+ void *cookie = tsk->cookie[tsk->outdex];
+ struct bcom_bd *bd = bcom_get_bd(tsk, tsk->outdex);
+
+ if (p_status)
+ *p_status = bd->status;
+ if (p_bd)
+ *p_bd = bd;
+ tsk->outdex = _bcom_next_outdex(tsk);
+ return cookie;
+}
+
+#endif /* __BESTCOMM_H__ */
--- /dev/null
+/*
+ * Private header for the MPC52xx processor BestComm driver
+ *
+ * By private, we mean that driver should not use it directly. It's meant
+ * to be used by the BestComm engine driver itself and by the intermediate
+ * layer between the core and the drivers.
+ *
+ * Copyright (C) 2006 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2005 Varma Electronics Oy,
+ * ( by Andrey Volkov <avolkov@varma-el.com> )
+ * Copyright (C) 2003-2004 MontaVista, Software, Inc.
+ * ( by Dale Farnsworth <dfarnsworth@mvista.com> )
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __BESTCOMM_PRIV_H__
+#define __BESTCOMM_PRIV_H__
+
+#include <linux/spinlock.h>
+#include <linux/of.h>
+#include <asm/io.h>
+#include <asm/mpc52xx.h>
+
+#include "sram.h"
+
+
+/* ======================================================================== */
+/* Engine related stuff */
+/* ======================================================================== */
+
+/* Zones sizes and needed alignments */
+#define BCOM_MAX_TASKS 16
+#define BCOM_MAX_VAR 24
+#define BCOM_MAX_INC 8
+#define BCOM_MAX_FDT 64
+#define BCOM_MAX_CTX 20
+#define BCOM_CTX_SIZE (BCOM_MAX_CTX * sizeof(u32))
+#define BCOM_CTX_ALIGN 0x100
+#define BCOM_VAR_SIZE (BCOM_MAX_VAR * sizeof(u32))
+#define BCOM_INC_SIZE (BCOM_MAX_INC * sizeof(u32))
+#define BCOM_VAR_ALIGN 0x80
+#define BCOM_FDT_SIZE (BCOM_MAX_FDT * sizeof(u32))
+#define BCOM_FDT_ALIGN 0x100
+
+/**
+ * struct bcom_tdt - Task Descriptor Table Entry
+ *
+ */
+struct bcom_tdt {
+ u32 start;
+ u32 stop;
+ u32 var;
+ u32 fdt;
+ u32 exec_status; /* used internally by BestComm engine */
+ u32 mvtp; /* used internally by BestComm engine */
+ u32 context;
+ u32 litbase;
+};
+
+/**
+ * struct bcom_engine
+ *
+ * This holds all info needed globaly to handle the engine
+ */
+struct bcom_engine {
+ struct device_node *ofnode;
+ struct mpc52xx_sdma __iomem *regs;
+ phys_addr_t regs_base;
+
+ struct bcom_tdt *tdt;
+ u32 *ctx;
+ u32 *var;
+ u32 *fdt;
+
+ spinlock_t lock;
+};
+
+extern struct bcom_engine *bcom_eng;
+
+
+/* ======================================================================== */
+/* Tasks related stuff */
+/* ======================================================================== */
+
+/* Tasks image header */
+#define BCOM_TASK_MAGIC 0x4243544B /* 'BCTK' */
+
+struct bcom_task_header {
+ u32 magic;
+ u8 desc_size; /* the size fields */
+ u8 var_size; /* are given in number */
+ u8 inc_size; /* of 32-bits words */
+ u8 first_var;
+ u8 reserved[8];
+};
+
+/* Descriptors structure & co */
+#define BCOM_DESC_NOP 0x000001f8
+#define BCOM_LCD_MASK 0x80000000
+#define BCOM_DRD_EXTENDED 0x40000000
+#define BCOM_DRD_INITIATOR_SHIFT 21
+
+/* Tasks pragma */
+#define BCOM_PRAGMA_BIT_RSV 7 /* reserved pragma bit */
+#define BCOM_PRAGMA_BIT_PRECISE_INC 6 /* increment 0=when possible, */
+ /* 1=iter end */
+#define BCOM_PRAGMA_BIT_RST_ERROR_NO 5 /* don't reset errors on */
+ /* task enable */
+#define BCOM_PRAGMA_BIT_PACK 4 /* pack data enable */
+#define BCOM_PRAGMA_BIT_INTEGER 3 /* data alignment */
+ /* 0=frac(msb), 1=int(lsb) */
+#define BCOM_PRAGMA_BIT_SPECREAD 2 /* XLB speculative read */
+#define BCOM_PRAGMA_BIT_CW 1 /* write line buffer enable */
+#define BCOM_PRAGMA_BIT_RL 0 /* read line buffer enable */
+
+ /* Looks like XLB speculative read generates XLB errors when a buffer
+ * is at the end of the physical memory. i.e. when accessing the
+ * lasts words, the engine tries to prefetch the next but there is no
+ * next ...
+ */
+#define BCOM_STD_PRAGMA ((0 << BCOM_PRAGMA_BIT_RSV) | \
+ (0 << BCOM_PRAGMA_BIT_PRECISE_INC) | \
+ (0 << BCOM_PRAGMA_BIT_RST_ERROR_NO) | \
+ (0 << BCOM_PRAGMA_BIT_PACK) | \
+ (0 << BCOM_PRAGMA_BIT_INTEGER) | \
+ (0 << BCOM_PRAGMA_BIT_SPECREAD) | \
+ (1 << BCOM_PRAGMA_BIT_CW) | \
+ (1 << BCOM_PRAGMA_BIT_RL))
+
+#define BCOM_PCI_PRAGMA ((0 << BCOM_PRAGMA_BIT_RSV) | \
+ (0 << BCOM_PRAGMA_BIT_PRECISE_INC) | \
+ (0 << BCOM_PRAGMA_BIT_RST_ERROR_NO) | \
+ (0 << BCOM_PRAGMA_BIT_PACK) | \
+ (1 << BCOM_PRAGMA_BIT_INTEGER) | \
+ (0 << BCOM_PRAGMA_BIT_SPECREAD) | \
+ (1 << BCOM_PRAGMA_BIT_CW) | \
+ (1 << BCOM_PRAGMA_BIT_RL))
+
+#define BCOM_ATA_PRAGMA BCOM_STD_PRAGMA
+#define BCOM_CRC16_DP_0_PRAGMA BCOM_STD_PRAGMA
+#define BCOM_CRC16_DP_1_PRAGMA BCOM_STD_PRAGMA
+#define BCOM_FEC_RX_BD_PRAGMA BCOM_STD_PRAGMA
+#define BCOM_FEC_TX_BD_PRAGMA BCOM_STD_PRAGMA
+#define BCOM_GEN_DP_0_PRAGMA BCOM_STD_PRAGMA
+#define BCOM_GEN_DP_1_PRAGMA BCOM_STD_PRAGMA
+#define BCOM_GEN_DP_2_PRAGMA BCOM_STD_PRAGMA
+#define BCOM_GEN_DP_3_PRAGMA BCOM_STD_PRAGMA
+#define BCOM_GEN_DP_BD_0_PRAGMA BCOM_STD_PRAGMA
+#define BCOM_GEN_DP_BD_1_PRAGMA BCOM_STD_PRAGMA
+#define BCOM_GEN_RX_BD_PRAGMA BCOM_STD_PRAGMA
+#define BCOM_GEN_TX_BD_PRAGMA BCOM_STD_PRAGMA
+#define BCOM_GEN_LPC_PRAGMA BCOM_STD_PRAGMA
+#define BCOM_PCI_RX_PRAGMA BCOM_PCI_PRAGMA
+#define BCOM_PCI_TX_PRAGMA BCOM_PCI_PRAGMA
+
+/* Initiators number */
+#define BCOM_INITIATOR_ALWAYS 0
+#define BCOM_INITIATOR_SCTMR_0 1
+#define BCOM_INITIATOR_SCTMR_1 2
+#define BCOM_INITIATOR_FEC_RX 3
+#define BCOM_INITIATOR_FEC_TX 4
+#define BCOM_INITIATOR_ATA_RX 5
+#define BCOM_INITIATOR_ATA_TX 6
+#define BCOM_INITIATOR_SCPCI_RX 7
+#define BCOM_INITIATOR_SCPCI_TX 8
+#define BCOM_INITIATOR_PSC3_RX 9
+#define BCOM_INITIATOR_PSC3_TX 10
+#define BCOM_INITIATOR_PSC2_RX 11
+#define BCOM_INITIATOR_PSC2_TX 12
+#define BCOM_INITIATOR_PSC1_RX 13
+#define BCOM_INITIATOR_PSC1_TX 14
+#define BCOM_INITIATOR_SCTMR_2 15
+#define BCOM_INITIATOR_SCLPC 16
+#define BCOM_INITIATOR_PSC5_RX 17
+#define BCOM_INITIATOR_PSC5_TX 18
+#define BCOM_INITIATOR_PSC4_RX 19
+#define BCOM_INITIATOR_PSC4_TX 20
+#define BCOM_INITIATOR_I2C2_RX 21
+#define BCOM_INITIATOR_I2C2_TX 22
+#define BCOM_INITIATOR_I2C1_RX 23
+#define BCOM_INITIATOR_I2C1_TX 24
+#define BCOM_INITIATOR_PSC6_RX 25
+#define BCOM_INITIATOR_PSC6_TX 26
+#define BCOM_INITIATOR_IRDA_RX 25
+#define BCOM_INITIATOR_IRDA_TX 26
+#define BCOM_INITIATOR_SCTMR_3 27
+#define BCOM_INITIATOR_SCTMR_4 28
+#define BCOM_INITIATOR_SCTMR_5 29
+#define BCOM_INITIATOR_SCTMR_6 30
+#define BCOM_INITIATOR_SCTMR_7 31
+
+/* Initiators priorities */
+#define BCOM_IPR_ALWAYS 7
+#define BCOM_IPR_SCTMR_0 2
+#define BCOM_IPR_SCTMR_1 2
+#define BCOM_IPR_FEC_RX 6
+#define BCOM_IPR_FEC_TX 5
+#define BCOM_IPR_ATA_RX 7
+#define BCOM_IPR_ATA_TX 7
+#define BCOM_IPR_SCPCI_RX 2
+#define BCOM_IPR_SCPCI_TX 2
+#define BCOM_IPR_PSC3_RX 2
+#define BCOM_IPR_PSC3_TX 2
+#define BCOM_IPR_PSC2_RX 2
+#define BCOM_IPR_PSC2_TX 2
+#define BCOM_IPR_PSC1_RX 2
+#define BCOM_IPR_PSC1_TX 2
+#define BCOM_IPR_SCTMR_2 2
+#define BCOM_IPR_SCLPC 2
+#define BCOM_IPR_PSC5_RX 2
+#define BCOM_IPR_PSC5_TX 2
+#define BCOM_IPR_PSC4_RX 2
+#define BCOM_IPR_PSC4_TX 2
+#define BCOM_IPR_I2C2_RX 2
+#define BCOM_IPR_I2C2_TX 2
+#define BCOM_IPR_I2C1_RX 2
+#define BCOM_IPR_I2C1_TX 2
+#define BCOM_IPR_PSC6_RX 2
+#define BCOM_IPR_PSC6_TX 2
+#define BCOM_IPR_IRDA_RX 2
+#define BCOM_IPR_IRDA_TX 2
+#define BCOM_IPR_SCTMR_3 2
+#define BCOM_IPR_SCTMR_4 2
+#define BCOM_IPR_SCTMR_5 2
+#define BCOM_IPR_SCTMR_6 2
+#define BCOM_IPR_SCTMR_7 2
+
+
+/* ======================================================================== */
+/* API */
+/* ======================================================================== */
+
+extern struct bcom_task *bcom_task_alloc(int bd_count, int bd_size, int priv_size);
+extern void bcom_task_free(struct bcom_task *tsk);
+extern int bcom_load_image(int task, u32 *task_image);
+extern void bcom_set_initiator(int task, int initiator);
+
+
+#define TASK_ENABLE 0x8000
+
+/**
+ * bcom_disable_prefetch - Hook to disable bus prefetching
+ *
+ * ATA DMA and the original MPC5200 need this due to silicon bugs. At the
+ * moment disabling prefetch is a one-way street. There is no mechanism
+ * in place to turn prefetch back on after it has been disabled. There is
+ * no reason it couldn't be done, it would just be more complex to implement.
+ */
+static inline void bcom_disable_prefetch(void)
+{
+ u16 regval;
+
+ regval = in_be16(&bcom_eng->regs->PtdCntrl);
+ out_be16(&bcom_eng->regs->PtdCntrl, regval | 1);
+};
+
+static inline void
+bcom_enable_task(int task)
+{
+ u16 reg;
+ reg = in_be16(&bcom_eng->regs->tcr[task]);
+ out_be16(&bcom_eng->regs->tcr[task], reg | TASK_ENABLE);
+}
+
+static inline void
+bcom_disable_task(int task)
+{
+ u16 reg = in_be16(&bcom_eng->regs->tcr[task]);
+ out_be16(&bcom_eng->regs->tcr[task], reg & ~TASK_ENABLE);
+}
+
+
+static inline u32 *
+bcom_task_desc(int task)
+{
+ return bcom_sram_pa2va(bcom_eng->tdt[task].start);
+}
+
+static inline int
+bcom_task_num_descs(int task)
+{
+ return (bcom_eng->tdt[task].stop - bcom_eng->tdt[task].start)/sizeof(u32) + 1;
+}
+
+static inline u32 *
+bcom_task_var(int task)
+{
+ return bcom_sram_pa2va(bcom_eng->tdt[task].var);
+}
+
+static inline u32 *
+bcom_task_inc(int task)
+{
+ return &bcom_task_var(task)[BCOM_MAX_VAR];
+}
+
+
+static inline int
+bcom_drd_is_extended(u32 desc)
+{
+ return (desc) & BCOM_DRD_EXTENDED;
+}
+
+static inline int
+bcom_desc_is_drd(u32 desc)
+{
+ return !(desc & BCOM_LCD_MASK) && desc != BCOM_DESC_NOP;
+}
+
+static inline int
+bcom_desc_initiator(u32 desc)
+{
+ return (desc >> BCOM_DRD_INITIATOR_SHIFT) & 0x1f;
+}
+
+static inline void
+bcom_set_desc_initiator(u32 *desc, int initiator)
+{
+ *desc = (*desc & ~(0x1f << BCOM_DRD_INITIATOR_SHIFT)) |
+ ((initiator & 0x1f) << BCOM_DRD_INITIATOR_SHIFT);
+}
+
+
+static inline void
+bcom_set_task_pragma(int task, int pragma)
+{
+ u32 *fdt = &bcom_eng->tdt[task].fdt;
+ *fdt = (*fdt & ~0xff) | pragma;
+}
+
+static inline void
+bcom_set_task_auto_start(int task, int next_task)
+{
+ u16 __iomem *tcr = &bcom_eng->regs->tcr[task];
+ out_be16(tcr, (in_be16(tcr) & ~0xff) | 0x00c0 | next_task);
+}
+
+static inline void
+bcom_set_tcr_initiator(int task, int initiator)
+{
+ u16 __iomem *tcr = &bcom_eng->regs->tcr[task];
+ out_be16(tcr, (in_be16(tcr) & ~0x1f00) | ((initiator & 0x1f) << 8));
+}
+
+
+#endif /* __BESTCOMM_PRIV_H__ */
+
--- /dev/null
+/*
+ * Header for Bestcomm FEC tasks driver
+ *
+ *
+ * Copyright (C) 2006-2007 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003-2004 MontaVista, Software, Inc.
+ * ( by Dale Farnsworth <dfarnsworth@mvista.com> )
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __BESTCOMM_FEC_H__
+#define __BESTCOMM_FEC_H__
+
+
+struct bcom_fec_bd {
+ u32 status;
+ u32 skb_pa;
+};
+
+#define BCOM_FEC_TX_BD_TFD 0x08000000ul /* transmit frame done */
+#define BCOM_FEC_TX_BD_TC 0x04000000ul /* transmit CRC */
+#define BCOM_FEC_TX_BD_ABC 0x02000000ul /* append bad CRC */
+
+#define BCOM_FEC_RX_BD_L 0x08000000ul /* buffer is last in frame */
+#define BCOM_FEC_RX_BD_BC 0x00800000ul /* DA is broadcast */
+#define BCOM_FEC_RX_BD_MC 0x00400000ul /* DA is multicast and not broadcast */
+#define BCOM_FEC_RX_BD_LG 0x00200000ul /* Rx frame length violation */
+#define BCOM_FEC_RX_BD_NO 0x00100000ul /* Rx non-octet aligned frame */
+#define BCOM_FEC_RX_BD_CR 0x00040000ul /* Rx CRC error */
+#define BCOM_FEC_RX_BD_OV 0x00020000ul /* overrun */
+#define BCOM_FEC_RX_BD_TR 0x00010000ul /* Rx frame truncated */
+#define BCOM_FEC_RX_BD_LEN_MASK 0x000007fful /* mask for length of received frame */
+#define BCOM_FEC_RX_BD_ERRORS (BCOM_FEC_RX_BD_LG | BCOM_FEC_RX_BD_NO | \
+ BCOM_FEC_RX_BD_CR | BCOM_FEC_RX_BD_OV | BCOM_FEC_RX_BD_TR)
+
+
+extern struct bcom_task *
+bcom_fec_rx_init(int queue_len, phys_addr_t fifo, int maxbufsize);
+
+extern int
+bcom_fec_rx_reset(struct bcom_task *tsk);
+
+extern void
+bcom_fec_rx_release(struct bcom_task *tsk);
+
+
+extern struct bcom_task *
+bcom_fec_tx_init(int queue_len, phys_addr_t fifo);
+
+extern int
+bcom_fec_tx_reset(struct bcom_task *tsk);
+
+extern void
+bcom_fec_tx_release(struct bcom_task *tsk);
+
+
+#endif /* __BESTCOMM_FEC_H__ */
+
--- /dev/null
+/*
+ * Header for Bestcomm General Buffer Descriptor tasks driver
+ *
+ *
+ * Copyright (C) 2007 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2006 AppSpec Computer Technologies Corp.
+ * Jeff Gibbons <jeff.gibbons@appspec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ *
+ */
+
+#ifndef __BESTCOMM_GEN_BD_H__
+#define __BESTCOMM_GEN_BD_H__
+
+struct bcom_gen_bd {
+ u32 status;
+ u32 buf_pa;
+};
+
+
+extern struct bcom_task *
+bcom_gen_bd_rx_init(int queue_len, phys_addr_t fifo,
+ int initiator, int ipr, int maxbufsize);
+
+extern int
+bcom_gen_bd_rx_reset(struct bcom_task *tsk);
+
+extern void
+bcom_gen_bd_rx_release(struct bcom_task *tsk);
+
+
+extern struct bcom_task *
+bcom_gen_bd_tx_init(int queue_len, phys_addr_t fifo,
+ int initiator, int ipr);
+
+extern int
+bcom_gen_bd_tx_reset(struct bcom_task *tsk);
+
+extern void
+bcom_gen_bd_tx_release(struct bcom_task *tsk);
+
+
+/* PSC support utility wrappers */
+struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len,
+ phys_addr_t fifo, int maxbufsize);
+struct bcom_task * bcom_psc_gen_bd_tx_init(unsigned psc_num, int queue_len,
+ phys_addr_t fifo);
+#endif /* __BESTCOMM_GEN_BD_H__ */
+
--- /dev/null
+/*
+ * Handling of a sram zone for bestcomm
+ *
+ *
+ * Copyright (C) 2007 Sylvain Munaut <tnt@246tNt.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __BESTCOMM_SRAM_H__
+#define __BESTCOMM_SRAM_H__
+
+#include <asm/rheap.h>
+#include <asm/mmu.h>
+#include <linux/spinlock.h>
+
+
+/* Structure used internally */
+ /* The internals are here for the inline functions
+ * sake, certainly not for the user to mess with !
+ */
+struct bcom_sram {
+ phys_addr_t base_phys;
+ void *base_virt;
+ unsigned int size;
+ rh_info_t *rh;
+ spinlock_t lock;
+};
+
+extern struct bcom_sram *bcom_sram;
+
+
+/* Public API */
+extern int bcom_sram_init(struct device_node *sram_node, char *owner);
+extern void bcom_sram_cleanup(void);
+
+extern void* bcom_sram_alloc(int size, int align, phys_addr_t *phys);
+extern void bcom_sram_free(void *ptr);
+
+static inline phys_addr_t bcom_sram_va2pa(void *va) {
+ return bcom_sram->base_phys +
+ (unsigned long)(va - bcom_sram->base_virt);
+}
+
+static inline void *bcom_sram_pa2va(phys_addr_t pa) {
+ return bcom_sram->base_virt +
+ (unsigned long)(pa - bcom_sram->base_phys);
+}
+
+
+#endif /* __BESTCOMM_SRAM_H__ */
+
#include <sound/soc.h>
-#include <sysdev/bestcomm/bestcomm.h>
-#include <sysdev/bestcomm/gen_bd.h>
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/gen_bd.h>
#include <asm/mpc52xx_psc.h>
#include "mpc5200_dma.h"
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff