[ARM] 5563/1: at91: at91sam9rlek lcd interface correction

Here is a little update to the at91sam9rlek lcd interface.
This will correct the power pin of the LCD.
It will also add precision to the struct atmel_lcdfb_info
scructure: backlight enabling  and wiring mode correction:
RGB wiring on the -EK board.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 35e12a49d1a684372f736fe374abed15763cd6bd..f6b5672cabd6377e6fdb8cc9b9531c565c72042a 100644 (file)
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -186,19 +186,21 @@ static struct fb_monspecs at91fb_default_monspecs = {
 static void at91_lcdc_power_control(int on)
 {
        if (on)
-               at91_set_gpio_value(AT91_PIN_PA30, 0);  /* power up */
+               at91_set_gpio_value(AT91_PIN_PC1, 0);   /* power up */
        else
-               at91_set_gpio_value(AT91_PIN_PA30, 1);  /* power down */
+               at91_set_gpio_value(AT91_PIN_PC1, 1);   /* power down */
 }
 
 /* Driver datas */
 static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+       .lcdcon_is_backlight            = true,
        .default_bpp                    = 16,
        .default_dmacon                 = ATMEL_LCDC_DMAEN,
        .default_lcdcon2                = AT91SAM9RL_DEFAULT_LCDCON2,
        .default_monspecs               = &at91fb_default_monspecs,
        .atmel_lcdfb_power_control      = at91_lcdc_power_control,
        .guard_time                     = 1,
+       .lcd_wiring_mode                = ATMEL_LCDC_WIRING_RGB,
 };
 
 #else