/* Autoneg and full-duplex are supported and advertised unconditionally. */
/* Always advertise and support all speeds up to specified, and only one */
/* specified port type. */
-static void qeth_set_ecmd_adv_sup(struct ethtool_cmd *ecmd,
+static void qeth_set_cmd_adv_sup(struct ethtool_link_ksettings *cmd,
int maxspeed, int porttype)
{
u32 sup, adv;
adv |= ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full;
WARN_ON_ONCE(1);
}
- ecmd->supported = sup;
- ecmd->advertising = adv;
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ sup);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ adv);
}
-int qeth_core_ethtool_get_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
+int qeth_core_ethtool_get_link_ksettings(struct net_device *netdev,
+ struct ethtool_link_ksettings *cmd)
{
struct qeth_card *card = netdev->ml_priv;
enum qeth_link_types link_type;
struct carrier_info carrier_info;
int rc;
- u32 speed;
if ((card->info.type == QETH_CARD_TYPE_IQD) || (card->info.guestlan))
link_type = QETH_LINK_TYPE_10GBIT_ETH;
else
link_type = card->info.link_type;
- ecmd->transceiver = XCVR_INTERNAL;
- ecmd->duplex = DUPLEX_FULL;
- ecmd->autoneg = AUTONEG_ENABLE;
+ cmd->base.duplex = DUPLEX_FULL;
+ cmd->base.autoneg = AUTONEG_ENABLE;
+ cmd->base.phy_address = 0;
+ cmd->base.mdio_support = 0;
+ cmd->base.eth_tp_mdix = ETH_TP_MDI_INVALID;
+ cmd->base.eth_tp_mdix_ctrl = ETH_TP_MDI_INVALID;
switch (link_type) {
case QETH_LINK_TYPE_FAST_ETH:
case QETH_LINK_TYPE_LANE_ETH100:
- qeth_set_ecmd_adv_sup(ecmd, SPEED_100, PORT_TP);
- speed = SPEED_100;
- ecmd->port = PORT_TP;
+ cmd->base.speed = SPEED_100;
+ cmd->base.port = PORT_TP;
break;
-
case QETH_LINK_TYPE_GBIT_ETH:
case QETH_LINK_TYPE_LANE_ETH1000:
- qeth_set_ecmd_adv_sup(ecmd, SPEED_1000, PORT_FIBRE);
- speed = SPEED_1000;
- ecmd->port = PORT_FIBRE;
+ cmd->base.speed = SPEED_1000;
+ cmd->base.port = PORT_FIBRE;
break;
-
case QETH_LINK_TYPE_10GBIT_ETH:
- qeth_set_ecmd_adv_sup(ecmd, SPEED_10000, PORT_FIBRE);
- speed = SPEED_10000;
- ecmd->port = PORT_FIBRE;
+ cmd->base.speed = SPEED_10000;
+ cmd->base.port = PORT_FIBRE;
break;
-
default:
- qeth_set_ecmd_adv_sup(ecmd, SPEED_10, PORT_TP);
- speed = SPEED_10;
- ecmd->port = PORT_TP;
+ cmd->base.speed = SPEED_10;
+ cmd->base.port = PORT_TP;
}
- ethtool_cmd_speed_set(ecmd, speed);
+ qeth_set_cmd_adv_sup(cmd, cmd->base.speed, cmd->base.port);
/* Check if we can obtain more accurate information. */
/* If QUERY_CARD_INFO command is not supported or fails, */
switch (carrier_info.card_type) {
case CARD_INFO_TYPE_1G_COPPER_A:
case CARD_INFO_TYPE_1G_COPPER_B:
- qeth_set_ecmd_adv_sup(ecmd, SPEED_1000, PORT_TP);
- ecmd->port = PORT_TP;
+ cmd->base.port = PORT_TP;
+ qeth_set_cmd_adv_sup(cmd, SPEED_1000, cmd->base.port);
break;
case CARD_INFO_TYPE_1G_FIBRE_A:
case CARD_INFO_TYPE_1G_FIBRE_B:
- qeth_set_ecmd_adv_sup(ecmd, SPEED_1000, PORT_FIBRE);
- ecmd->port = PORT_FIBRE;
+ cmd->base.port = PORT_FIBRE;
+ qeth_set_cmd_adv_sup(cmd, SPEED_1000, cmd->base.port);
break;
case CARD_INFO_TYPE_10G_FIBRE_A:
case CARD_INFO_TYPE_10G_FIBRE_B:
- qeth_set_ecmd_adv_sup(ecmd, SPEED_10000, PORT_FIBRE);
- ecmd->port = PORT_FIBRE;
+ cmd->base.port = PORT_FIBRE;
+ qeth_set_cmd_adv_sup(cmd, SPEED_10000, cmd->base.port);
break;
}
switch (carrier_info.port_mode) {
case CARD_INFO_PORTM_FULLDUPLEX:
- ecmd->duplex = DUPLEX_FULL;
+ cmd->base.duplex = DUPLEX_FULL;
break;
case CARD_INFO_PORTM_HALFDUPLEX:
- ecmd->duplex = DUPLEX_HALF;
+ cmd->base.duplex = DUPLEX_HALF;
break;
}
switch (carrier_info.port_speed) {
case CARD_INFO_PORTS_10M:
- speed = SPEED_10;
+ cmd->base.speed = SPEED_10;
break;
case CARD_INFO_PORTS_100M:
- speed = SPEED_100;
+ cmd->base.speed = SPEED_100;
break;
case CARD_INFO_PORTS_1G:
- speed = SPEED_1000;
+ cmd->base.speed = SPEED_1000;
break;
case CARD_INFO_PORTS_10G:
- speed = SPEED_10000;
+ cmd->base.speed = SPEED_10000;
break;
}
- ethtool_cmd_speed_set(ecmd, speed);
return 0;
}
-EXPORT_SYMBOL_GPL(qeth_core_ethtool_get_settings);
+EXPORT_SYMBOL_GPL(qeth_core_ethtool_get_link_ksettings);
/* Callback to handle checksum offload command reply from OSA card.
* Verify that required features have been enabled on the card.