+++ /dev/null
-/*
- * Samsung Laptop driver
- *
- * Copyright (C) 2009,2011 Greg Kroah-Hartman (gregkh@suse.de)
- * Copyright (C) 2009,2011 Novell Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- */
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/backlight.h>
-#include <linux/fb.h>
-#include <linux/dmi.h>
-#include <linux/platform_device.h>
-#include <linux/rfkill.h>
-
-/*
- * This driver is needed because a number of Samsung laptops do not hook
- * their control settings through ACPI. So we have to poke around in the
- * BIOS to do things like brightness values, and "special" key controls.
- */
-
-/*
- * We have 0 - 8 as valid brightness levels. The specs say that level 0 should
- * be reserved by the BIOS (which really doesn't make much sense), we tell
- * userspace that the value is 0 - 7 and then just tell the hardware 1 - 8
- */
-#define MAX_BRIGHT 0x07
-
-
-#define SABI_IFACE_MAIN 0x00
-#define SABI_IFACE_SUB 0x02
-#define SABI_IFACE_COMPLETE 0x04
-#define SABI_IFACE_DATA 0x05
-
-/* Structure to get data back to the calling function */
-struct sabi_retval {
- u8 retval[20];
-};
-
-struct sabi_header_offsets {
- u8 port;
- u8 re_mem;
- u8 iface_func;
- u8 en_mem;
- u8 data_offset;
- u8 data_segment;
-};
-
-struct sabi_commands {
- /*
- * Brightness is 0 - 8, as described above.
- * Value 0 is for the BIOS to use
- */
- u8 get_brightness;
- u8 set_brightness;
-
- /*
- * first byte:
- * 0x00 - wireless is off
- * 0x01 - wireless is on
- * second byte:
- * 0x02 - 3G is off
- * 0x03 - 3G is on
- * TODO, verify 3G is correct, that doesn't seem right...
- */
- u8 get_wireless_button;
- u8 set_wireless_button;
-
- /* 0 is off, 1 is on */
- u8 get_backlight;
- u8 set_backlight;
-
- /*
- * 0x80 or 0x00 - no action
- * 0x81 - recovery key pressed
- */
- u8 get_recovery_mode;
- u8 set_recovery_mode;
-
- /*
- * on seclinux: 0 is low, 1 is high,
- * on swsmi: 0 is normal, 1 is silent, 2 is turbo
- */
- u8 get_performance_level;
- u8 set_performance_level;
-
- /*
- * Tell the BIOS that Linux is running on this machine.
- * 81 is on, 80 is off
- */
- u8 set_linux;
-};
-
-struct sabi_performance_level {
- const char *name;
- u8 value;
-};
-
-struct sabi_config {
- const char *test_string;
- u16 main_function;
- const struct sabi_header_offsets header_offsets;
- const struct sabi_commands commands;
- const struct sabi_performance_level performance_levels[4];
- u8 min_brightness;
- u8 max_brightness;
-};
-
-static const struct sabi_config sabi_configs[] = {
- {
- .test_string = "SECLINUX",
-
- .main_function = 0x4c49,
-
- .header_offsets = {
- .port = 0x00,
- .re_mem = 0x02,
- .iface_func = 0x03,
- .en_mem = 0x04,
- .data_offset = 0x05,
- .data_segment = 0x07,
- },
-
- .commands = {
- .get_brightness = 0x00,
- .set_brightness = 0x01,
-
- .get_wireless_button = 0x02,
- .set_wireless_button = 0x03,
-
- .get_backlight = 0x04,
- .set_backlight = 0x05,
-
- .get_recovery_mode = 0x06,
- .set_recovery_mode = 0x07,
-
- .get_performance_level = 0x08,
- .set_performance_level = 0x09,
-
- .set_linux = 0x0a,
- },
-
- .performance_levels = {
- {
- .name = "silent",
- .value = 0,
- },
- {
- .name = "normal",
- .value = 1,
- },
- { },
- },
- .min_brightness = 1,
- .max_brightness = 8,
- },
- {
- .test_string = "SwSmi@",
-
- .main_function = 0x5843,
-
- .header_offsets = {
- .port = 0x00,
- .re_mem = 0x04,
- .iface_func = 0x02,
- .en_mem = 0x03,
- .data_offset = 0x05,
- .data_segment = 0x07,
- },
-
- .commands = {
- .get_brightness = 0x10,
- .set_brightness = 0x11,
-
- .get_wireless_button = 0x12,
- .set_wireless_button = 0x13,
-
- .get_backlight = 0x2d,
- .set_backlight = 0x2e,
-
- .get_recovery_mode = 0xff,
- .set_recovery_mode = 0xff,
-
- .get_performance_level = 0x31,
- .set_performance_level = 0x32,
-
- .set_linux = 0xff,
- },
-
- .performance_levels = {
- {
- .name = "normal",
- .value = 0,
- },
- {
- .name = "silent",
- .value = 1,
- },
- {
- .name = "overclock",
- .value = 2,
- },
- { },
- },
- .min_brightness = 0,
- .max_brightness = 8,
- },
- { },
-};
-
-static const struct sabi_config *sabi_config;
-
-static void __iomem *sabi;
-static void __iomem *sabi_iface;
-static void __iomem *f0000_segment;
-static struct backlight_device *backlight_device;
-static struct mutex sabi_mutex;
-static struct platform_device *sdev;
-static struct rfkill *rfk;
-
-static int force;
-module_param(force, bool, 0);
-MODULE_PARM_DESC(force,
- "Disable the DMI check and forces the driver to be loaded");
-
-static int debug;
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");
-
-static int sabi_get_command(u8 command, struct sabi_retval *sretval)
-{
- int retval = 0;
- u16 port = readw(sabi + sabi_config->header_offsets.port);
- u8 complete, iface_data;
-
- mutex_lock(&sabi_mutex);
-
- /* enable memory to be able to write to it */
- outb(readb(sabi + sabi_config->header_offsets.en_mem), port);
-
- /* write out the command */
- writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN);
- writew(command, sabi_iface + SABI_IFACE_SUB);
- writeb(0, sabi_iface + SABI_IFACE_COMPLETE);
- outb(readb(sabi + sabi_config->header_offsets.iface_func), port);
-
- /* write protect memory to make it safe */
- outb(readb(sabi + sabi_config->header_offsets.re_mem), port);
-
- /* see if the command actually succeeded */
- complete = readb(sabi_iface + SABI_IFACE_COMPLETE);
- iface_data = readb(sabi_iface + SABI_IFACE_DATA);
- if (complete != 0xaa || iface_data == 0xff) {
- pr_warn("SABI get command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n",
- command, complete, iface_data);
- retval = -EINVAL;
- goto exit;
- }
- /*
- * Save off the data into a structure so the caller use it.
- * Right now we only want the first 4 bytes,
- * There are commands that need more, but not for the ones we
- * currently care about.
- */
- sretval->retval[0] = readb(sabi_iface + SABI_IFACE_DATA);
- sretval->retval[1] = readb(sabi_iface + SABI_IFACE_DATA + 1);
- sretval->retval[2] = readb(sabi_iface + SABI_IFACE_DATA + 2);
- sretval->retval[3] = readb(sabi_iface + SABI_IFACE_DATA + 3);
-
-exit:
- mutex_unlock(&sabi_mutex);
- return retval;
-
-}
-
-static int sabi_set_command(u8 command, u8 data)
-{
- int retval = 0;
- u16 port = readw(sabi + sabi_config->header_offsets.port);
- u8 complete, iface_data;
-
- mutex_lock(&sabi_mutex);
-
- /* enable memory to be able to write to it */
- outb(readb(sabi + sabi_config->header_offsets.en_mem), port);
-
- /* write out the command */
- writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN);
- writew(command, sabi_iface + SABI_IFACE_SUB);
- writeb(0, sabi_iface + SABI_IFACE_COMPLETE);
- writeb(data, sabi_iface + SABI_IFACE_DATA);
- outb(readb(sabi + sabi_config->header_offsets.iface_func), port);
-
- /* write protect memory to make it safe */
- outb(readb(sabi + sabi_config->header_offsets.re_mem), port);
-
- /* see if the command actually succeeded */
- complete = readb(sabi_iface + SABI_IFACE_COMPLETE);
- iface_data = readb(sabi_iface + SABI_IFACE_DATA);
- if (complete != 0xaa || iface_data == 0xff) {
- pr_warn("SABI set command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n",
- command, complete, iface_data);
- retval = -EINVAL;
- }
-
- mutex_unlock(&sabi_mutex);
- return retval;
-}
-
-static void test_backlight(void)
-{
- struct sabi_retval sretval;
-
- sabi_get_command(sabi_config->commands.get_backlight, &sretval);
- printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
-
- sabi_set_command(sabi_config->commands.set_backlight, 0);
- printk(KERN_DEBUG "backlight should be off\n");
-
- sabi_get_command(sabi_config->commands.get_backlight, &sretval);
- printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
-
- msleep(1000);
-
- sabi_set_command(sabi_config->commands.set_backlight, 1);
- printk(KERN_DEBUG "backlight should be on\n");
-
- sabi_get_command(sabi_config->commands.get_backlight, &sretval);
- printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
-}
-
-static void test_wireless(void)
-{
- struct sabi_retval sretval;
-
- sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
- printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
-
- sabi_set_command(sabi_config->commands.set_wireless_button, 0);
- printk(KERN_DEBUG "wireless led should be off\n");
-
- sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
- printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
-
- msleep(1000);
-
- sabi_set_command(sabi_config->commands.set_wireless_button, 1);
- printk(KERN_DEBUG "wireless led should be on\n");
-
- sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
- printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
-}
-
-static u8 read_brightness(void)
-{
- struct sabi_retval sretval;
- int user_brightness = 0;
- int retval;
-
- retval = sabi_get_command(sabi_config->commands.get_brightness,
- &sretval);
- if (!retval) {
- user_brightness = sretval.retval[0];
- if (user_brightness != 0)
- user_brightness -= sabi_config->min_brightness;
- }
- return user_brightness;
-}
-
-static void set_brightness(u8 user_brightness)
-{
- u8 user_level = user_brightness - sabi_config->min_brightness;
-
- sabi_set_command(sabi_config->commands.set_brightness, user_level);
-}
-
-static int get_brightness(struct backlight_device *bd)
-{
- return (int)read_brightness();
-}
-
-static int update_status(struct backlight_device *bd)
-{
- set_brightness(bd->props.brightness);
-
- if (bd->props.power == FB_BLANK_UNBLANK)
- sabi_set_command(sabi_config->commands.set_backlight, 1);
- else
- sabi_set_command(sabi_config->commands.set_backlight, 0);
- return 0;
-}
-
-static const struct backlight_ops backlight_ops = {
- .get_brightness = get_brightness,
- .update_status = update_status,
-};
-
-static int rfkill_set(void *data, bool blocked)
-{
- /* Do something with blocked...*/
- /*
- * blocked == false is on
- * blocked == true is off
- */
- if (blocked)
- sabi_set_command(sabi_config->commands.set_wireless_button, 0);
- else
- sabi_set_command(sabi_config->commands.set_wireless_button, 1);
-
- return 0;
-}
-
-static struct rfkill_ops rfkill_ops = {
- .set_block = rfkill_set,
-};
-
-static int init_wireless(struct platform_device *sdev)
-{
- int retval;
-
- rfk = rfkill_alloc("samsung-wifi", &sdev->dev, RFKILL_TYPE_WLAN,
- &rfkill_ops, NULL);
- if (!rfk)
- return -ENOMEM;
-
- retval = rfkill_register(rfk);
- if (retval) {
- rfkill_destroy(rfk);
- return -ENODEV;
- }
-
- return 0;
-}
-
-static void destroy_wireless(void)
-{
- rfkill_unregister(rfk);
- rfkill_destroy(rfk);
-}
-
-static ssize_t get_performance_level(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct sabi_retval sretval;
- int retval;
- int i;
-
- /* Read the state */
- retval = sabi_get_command(sabi_config->commands.get_performance_level,
- &sretval);
- if (retval)
- return retval;
-
- /* The logic is backwards, yeah, lots of fun... */
- for (i = 0; sabi_config->performance_levels[i].name; ++i) {
- if (sretval.retval[0] == sabi_config->performance_levels[i].value)
- return sprintf(buf, "%s\n", sabi_config->performance_levels[i].name);
- }
- return sprintf(buf, "%s\n", "unknown");
-}
-
-static ssize_t set_performance_level(struct device *dev,
- struct device_attribute *attr, const char *buf,
- size_t count)
-{
- if (count >= 1) {
- int i;
- for (i = 0; sabi_config->performance_levels[i].name; ++i) {
- const struct sabi_performance_level *level =
- &sabi_config->performance_levels[i];
- if (!strncasecmp(level->name, buf, strlen(level->name))) {
- sabi_set_command(sabi_config->commands.set_performance_level,
- level->value);
- break;
- }
- }
- if (!sabi_config->performance_levels[i].name)
- return -EINVAL;
- }
- return count;
-}
-static DEVICE_ATTR(performance_level, S_IWUSR | S_IRUGO,
- get_performance_level, set_performance_level);
-
-
-static int __init dmi_check_cb(const struct dmi_system_id *id)
-{
- pr_info("found laptop model '%s'\n",
- id->ident);
- return 0;
-}
-
-static struct dmi_system_id __initdata samsung_dmi_table[] = {
- {
- .ident = "N128",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N128"),
- DMI_MATCH(DMI_BOARD_NAME, "N128"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "N130",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N130"),
- DMI_MATCH(DMI_BOARD_NAME, "N130"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "X125",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "X125"),
- DMI_MATCH(DMI_BOARD_NAME, "X125"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "X120/X170",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "X120/X170"),
- DMI_MATCH(DMI_BOARD_NAME, "X120/X170"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "NC10",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
- DMI_MATCH(DMI_BOARD_NAME, "NC10"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "NP-Q45",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
- DMI_MATCH(DMI_BOARD_NAME, "SQ45S70S"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "X360",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "X360"),
- DMI_MATCH(DMI_BOARD_NAME, "X360"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R410 Plus",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "R410P"),
- DMI_MATCH(DMI_BOARD_NAME, "R460"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R518",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "R518"),
- DMI_MATCH(DMI_BOARD_NAME, "R518"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R519/R719",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "R519/R719"),
- DMI_MATCH(DMI_BOARD_NAME, "R519/R719"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "N150/N210/N220/N230",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220/N230"),
- DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220/N230"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "N150P/N210P/N220P",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N150P/N210P/N220P"),
- DMI_MATCH(DMI_BOARD_NAME, "N150P/N210P/N220P"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R530/R730",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "R530/R730"),
- DMI_MATCH(DMI_BOARD_NAME, "R530/R730"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "NF110/NF210/NF310",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"),
- DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "N145P/N250P/N260P",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"),
- DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "R70/R71",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR,
- "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "R70/R71"),
- DMI_MATCH(DMI_BOARD_NAME, "R70/R71"),
- },
- .callback = dmi_check_cb,
- },
- {
- .ident = "P460",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- DMI_MATCH(DMI_PRODUCT_NAME, "P460"),
- DMI_MATCH(DMI_BOARD_NAME, "P460"),
- },
- .callback = dmi_check_cb,
- },
- { },
-};
-MODULE_DEVICE_TABLE(dmi, samsung_dmi_table);
-
-static int find_signature(void __iomem *memcheck, const char *testStr)
-{
- int i = 0;
- int loca;
-
- for (loca = 0; loca < 0xffff; loca++) {
- char temp = readb(memcheck + loca);
-
- if (temp == testStr[i]) {
- if (i == strlen(testStr)-1)
- break;
- ++i;
- } else {
- i = 0;
- }
- }
- return loca;
-}
-
-static int __init samsung_init(void)
-{
- struct backlight_properties props;
- struct sabi_retval sretval;
- unsigned int ifaceP;
- int i;
- int loca;
- int retval;
-
- mutex_init(&sabi_mutex);
-
- if (!force && !dmi_check_system(samsung_dmi_table))
- return -ENODEV;
-
- f0000_segment = ioremap_nocache(0xf0000, 0xffff);
- if (!f0000_segment) {
- pr_err("Can't map the segment at 0xf0000\n");
- return -EINVAL;
- }
-
- /* Try to find one of the signatures in memory to find the header */
- for (i = 0; sabi_configs[i].test_string != 0; ++i) {
- sabi_config = &sabi_configs[i];
- loca = find_signature(f0000_segment, sabi_config->test_string);
- if (loca != 0xffff)
- break;
- }
-
- if (loca == 0xffff) {
- pr_err("This computer does not support SABI\n");
- goto error_no_signature;
- }
-
- /* point to the SMI port Number */
- loca += 1;
- sabi = (f0000_segment + loca);
-
- if (debug) {
- printk(KERN_DEBUG "This computer supports SABI==%x\n",
- loca + 0xf0000 - 6);
- printk(KERN_DEBUG "SABI header:\n");
- printk(KERN_DEBUG " SMI Port Number = 0x%04x\n",
- readw(sabi + sabi_config->header_offsets.port));
- printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n",
- readb(sabi + sabi_config->header_offsets.iface_func));
- printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n",
- readb(sabi + sabi_config->header_offsets.en_mem));
- printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n",
- readb(sabi + sabi_config->header_offsets.re_mem));
- printk(KERN_DEBUG " SABI data offset = 0x%04x\n",
- readw(sabi + sabi_config->header_offsets.data_offset));
- printk(KERN_DEBUG " SABI data segment = 0x%04x\n",
- readw(sabi + sabi_config->header_offsets.data_segment));
- }
-
- /* Get a pointer to the SABI Interface */
- ifaceP = (readw(sabi + sabi_config->header_offsets.data_segment) & 0x0ffff) << 4;
- ifaceP += readw(sabi + sabi_config->header_offsets.data_offset) & 0x0ffff;
- sabi_iface = ioremap_nocache(ifaceP, 16);
- if (!sabi_iface) {
- pr_err("Can't remap %x\n", ifaceP);
- goto exit;
- }
- if (debug) {
- printk(KERN_DEBUG "ifaceP = 0x%08x\n", ifaceP);
- printk(KERN_DEBUG "sabi_iface = %p\n", sabi_iface);
-
- test_backlight();
- test_wireless();
-
- retval = sabi_get_command(sabi_config->commands.get_brightness,
- &sretval);
- printk(KERN_DEBUG "brightness = 0x%02x\n", sretval.retval[0]);
- }
-
- /* Turn on "Linux" mode in the BIOS */
- if (sabi_config->commands.set_linux != 0xff) {
- retval = sabi_set_command(sabi_config->commands.set_linux,
- 0x81);
- if (retval) {
- pr_warn("Linux mode was not set!\n");
- goto error_no_platform;
- }
- }
-
- /* knock up a platform device to hang stuff off of */
- sdev = platform_device_register_simple("samsung", -1, NULL, 0);
- if (IS_ERR(sdev))
- goto error_no_platform;
-
- /* create a backlight device to talk to this one */
- memset(&props, 0, sizeof(struct backlight_properties));
- props.type = BACKLIGHT_PLATFORM;
- props.max_brightness = sabi_config->max_brightness;
- backlight_device = backlight_device_register("samsung", &sdev->dev,
- NULL, &backlight_ops,
- &props);
- if (IS_ERR(backlight_device))
- goto error_no_backlight;
-
- backlight_device->props.brightness = read_brightness();
- backlight_device->props.power = FB_BLANK_UNBLANK;
- backlight_update_status(backlight_device);
-
- retval = init_wireless(sdev);
- if (retval)
- goto error_no_rfk;
-
- retval = device_create_file(&sdev->dev, &dev_attr_performance_level);
- if (retval)
- goto error_file_create;
-
-exit:
- return 0;
-
-error_file_create:
- destroy_wireless();
-
-error_no_rfk:
- backlight_device_unregister(backlight_device);
-
-error_no_backlight:
- platform_device_unregister(sdev);
-
-error_no_platform:
- iounmap(sabi_iface);
-
-error_no_signature:
- iounmap(f0000_segment);
- return -EINVAL;
-}
-
-static void __exit samsung_exit(void)
-{
- /* Turn off "Linux" mode in the BIOS */
- if (sabi_config->commands.set_linux != 0xff)
- sabi_set_command(sabi_config->commands.set_linux, 0x80);
-
- device_remove_file(&sdev->dev, &dev_attr_performance_level);
- backlight_device_unregister(backlight_device);
- destroy_wireless();
- iounmap(sabi_iface);
- iounmap(f0000_segment);
- platform_device_unregister(sdev);
-}
-
-module_init(samsung_init);
-module_exit(samsung_exit);
-
-MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@suse.de>");
-MODULE_DESCRIPTION("Samsung Backlight driver");
-MODULE_LICENSE("GPL");
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff