net: phy: bcm7xxx: fix spurious MDIO failures during workaround
authorFlorian Fainelli <f.fainelli@gmail.com>
Mon, 24 Mar 2014 23:36:48 +0000 (16:36 -0700)
committerDavid S. Miller <davem@davemloft.net>
Wed, 26 Mar 2014 20:19:24 +0000 (16:19 -0400)
Writing first to the AFE registers, and then the VCO, RCAL, RC_CAL
registers turned out to unveil some spurious MDIO read/write failures
which would make the workaround partially applied. The fix is to write
first to the VCO, RCAL, RC_CAL registers, and then write to the AFE
registers.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/phy/bcm7xxx.c

index 3141941791683114b5d08f3c5d6dab3914593b8e..5991168bcbef3c77a4a1c08cbbe2646cda98325d 100644 (file)
@@ -103,21 +103,6 @@ static void phy_write_misc(struct phy_device *phydev,
 
 static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
 {
-       /* write AFE_RXCONFIG_0 */
-       phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
-
-       /* write AFE_RXCONFIG_1 */
-       phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
-
-       /* write AFE_RX_LP_COUNTER */
-       phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc7);
-
-       /* write AFE_HPF_TRIM_OTHERS */
-       phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
-
-       /* write AFTE_TX_CONFIG */
-       phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
-
        /* Increase VCO range to prevent unlocking problem of PLL at low
         * temp
         */
@@ -143,6 +128,21 @@ static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
        /* Disable Reset R_CAL/RC_CAL Engine */
        phy_write_exp(phydev, CORE_EXPB0, 0x0000);
 
+       /* write AFE_RXCONFIG_0 */
+       phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
+
+       /* write AFE_RXCONFIG_1 */
+       phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
+
+       /* write AFE_RX_LP_COUNTER */
+       phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc7);
+
+       /* write AFE_HPF_TRIM_OTHERS */
+       phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
+
+       /* write AFTE_TX_CONFIG */
+       phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
+
        return 0;
 }