ARM: dts: Correct audio input route & set mic bias for am335x-pepper
authorAdam YH Lee <adam.yh.lee@gmail.com>
Tue, 14 Jul 2015 18:17:24 +0000 (11:17 -0700)
committerTony Lindgren <tony@atomide.com>
Wed, 15 Jul 2015 10:03:01 +0000 (03:03 -0700)
Audio-in was incorrectly routed to Line In. It should be Mic3L as per
schematic.

Using mic-bias voltage at 2.0v (<0x1>) does not work for some reason. There
is no voltage seen on micbias (R127). Mic-bias voltage of 2.5v (<0x2>) works.
I see voltage of 2.475v across GND and micbias.

With these changes, I can record audio with a pair of proliferate TRRS earbuds.

Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com>
Acked-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/boot/dts/am335x-pepper.dts

index 206c042a7c4864bc865cc3bec910815b7c6e1720..7106114c74647cd2e76499a6f5654ddf5f98f73d 100644 (file)
@@ -74,6 +74,7 @@
        audio_codec: tlv320aic3106@1b {
                compatible = "ti,tlv320aic3106";
                reg = <0x1b>;
+               ai3x-micbias-vg = <0x2>;
        };
 
        accel: lis331dlh@1d {
        ti,audio-routing =
                "Headphone Jack",       "HPLOUT",
                "Headphone Jack",       "HPROUT",
-               "LINE1L",               "Line In";
+               "MIC3L",                "Mic3L Switch";
 };
 
 &mcasp0 {