spi/xilinx: Remove iowrite/ioread wrappers
authorRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Wed, 28 Jan 2015 12:23:51 +0000 (13:23 +0100)
committerMark Brown <broonie@kernel.org>
Wed, 28 Jan 2015 19:42:43 +0000 (19:42 +0000)
Save a stack level and cleanup code.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/spi/spi-xilinx.c

index b16fccfe69bfff6d216f89427aa0c6bb1d47e995..8c25c59df7b06caa2557348c1b9f7906405b8a96 100644 (file)
@@ -94,26 +94,6 @@ struct xilinx_spi {
        void (*write_fn)(u32, void __iomem *);
 };
 
-static void xspi_write32(u32 val, void __iomem *addr)
-{
-       iowrite32(val, addr);
-}
-
-static unsigned int xspi_read32(void __iomem *addr)
-{
-       return ioread32(addr);
-}
-
-static void xspi_write32_be(u32 val, void __iomem *addr)
-{
-       iowrite32be(val, addr);
-}
-
-static unsigned int xspi_read32_be(void __iomem *addr)
-{
-       return ioread32be(addr);
-}
-
 static void xilinx_spi_tx(struct xilinx_spi *xspi)
 {
        if (!xspi->tx_ptr) {
@@ -398,15 +378,15 @@ static int xilinx_spi_probe(struct platform_device *pdev)
         * Setup little endian helper functions first and try to use them
         * and check if bit was correctly setup or not.
         */
-       xspi->read_fn = xspi_read32;
-       xspi->write_fn = xspi_write32;
+       xspi->read_fn = ioread32;
+       xspi->write_fn = iowrite32;
 
        xspi->write_fn(XSPI_CR_LOOP, xspi->regs + XSPI_CR_OFFSET);
        tmp = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET);
        tmp &= XSPI_CR_LOOP;
        if (tmp != XSPI_CR_LOOP) {
-               xspi->read_fn = xspi_read32_be;
-               xspi->write_fn = xspi_write32_be;
+               xspi->read_fn = ioread32be;
+               xspi->write_fn = iowrite32be;
        }
 
        master->bits_per_word_mask = SPI_BPW_MASK(bits_per_word);