mfd: Fix WM8994 IRQ register cache restore on resume

When the byte swap was factored out into the per-register I/O functions
the register restore for the IRQ mask cache (which we use and store in
CPU native format for the interrupt handler) was not updated to do a byte
swap when it uses the bulk I/O. Fix this by writing the cache out one
register at a time.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 18f19b7198a05428e438d89a1567fff480d8e01c..7caf0d82a9a283bb504908b3b38e685552c8db82 100644 (file)
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -316,7 +316,7 @@ static int wm8994_suspend(struct device *dev)
 static int wm8994_resume(struct device *dev)
 {
        struct wm8994 *wm8994 = dev_get_drvdata(dev);
-       int ret;
+       int ret, i;
 
        /* We may have lied to the PM core about suspending */
        if (!wm8994->suspended)
@@ -329,10 +329,16 @@ static int wm8994_resume(struct device *dev)
                return ret;
        }
 
-       ret = wm8994_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK,
-                          WM8994_NUM_IRQ_REGS * 2, &wm8994->irq_masks_cur);
-       if (ret < 0)
-               dev_err(dev, "Failed to restore interrupt masks: %d\n", ret);
+       /* Write register at a time as we use the cache on the CPU so store
+        * it in native endian.
+        */
+       for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) {
+               ret = wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK
+                                      + i, wm8994->irq_masks_cur[i]);
+               if (ret < 0)
+                       dev_err(dev, "Failed to restore interrupt masks: %d\n",
+                               ret);
+       }
 
        ret = wm8994_write(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2,
                           &wm8994->ldo_regs);