__u8 lsr, __u8 data);
static int send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command,
__u8 param);
-static int calc_baud_rate_divisor(int baud_rate, int *divisor);
+static int calc_baud_rate_divisor(struct device *dev, int baud_rate, int *divisor);
static int send_cmd_write_baud_rate(struct edgeport_port *edge_port,
int baudRate);
static void change_port_settings(struct tty_struct *tty,
************************************************************************/
static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial)
{
+ struct device *dev = &edge_serial->serial->dev->dev;
__u32 BootCurVer;
__u32 BootNewVer;
__u8 BootMajorVersion;
response = request_ihex_firmware(&fw, fw_name,
&edge_serial->serial->dev->dev);
if (response) {
- printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
+ dev_err(dev, "Failed to load image \"%s\" err %d\n",
fw_name, response);
return;
}
(BootMinorVersion << 16) +
BootBuildNumber;
- dbg("Current Boot Image version %d.%d.%d",
+ dev_dbg(dev, "Current Boot Image version %d.%d.%d\n",
edge_serial->boot_descriptor.MajorVersion,
edge_serial->boot_descriptor.MinorVersion,
le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
if (BootNewVer > BootCurVer) {
- dbg("**Update Boot Image from %d.%d.%d to %d.%d.%d",
+ dev_dbg(dev, "**Update Boot Image from %d.%d.%d to %d.%d.%d\n",
edge_serial->boot_descriptor.MajorVersion,
edge_serial->boot_descriptor.MinorVersion,
le16_to_cpu(edge_serial->boot_descriptor.BuildNumber),
BootMajorVersion, BootMinorVersion, BootBuildNumber);
- dbg("Downloading new Boot Image");
+ dev_dbg(dev, "Downloading new Boot Image\n");
for (rec = ihex_next_binrec(rec); rec;
rec = ihex_next_binrec(rec)) {
}
}
} else {
- dbg("Boot Image -- already up to date");
+ dev_dbg(dev, "Boot Image -- already up to date\n");
}
release_firmware(fw);
}
struct usb_string_descriptor StringDesc;
struct usb_string_descriptor *pStringDesc;
- dbg("%s - USB String ID = %d", __func__, Id);
+ dev_dbg(&dev->dev, "%s - USB String ID = %d\n", __func__, Id);
if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc,
sizeof(StringDesc)))
}
#endif
-static void dump_product_info(struct edgeport_product_info *product_info)
+static void dump_product_info(struct edgeport_serial *edge_serial,
+ struct edgeport_product_info *product_info)
{
+ struct device *dev = &edge_serial->serial->dev->dev;
+
/* Dump Product Info structure */
- dbg("**Product Information:");
- dbg(" ProductId %x", product_info->ProductId);
- dbg(" NumPorts %d", product_info->NumPorts);
- dbg(" ProdInfoVer %d", product_info->ProdInfoVer);
- dbg(" IsServer %d", product_info->IsServer);
- dbg(" IsRS232 %d", product_info->IsRS232);
- dbg(" IsRS422 %d", product_info->IsRS422);
- dbg(" IsRS485 %d", product_info->IsRS485);
- dbg(" RomSize %d", product_info->RomSize);
- dbg(" RamSize %d", product_info->RamSize);
- dbg(" CpuRev %x", product_info->CpuRev);
- dbg(" BoardRev %x", product_info->BoardRev);
- dbg(" BootMajorVersion %d.%d.%d", product_info->BootMajorVersion,
- product_info->BootMinorVersion,
- le16_to_cpu(product_info->BootBuildNumber));
- dbg(" FirmwareMajorVersion %d.%d.%d",
- product_info->FirmwareMajorVersion,
- product_info->FirmwareMinorVersion,
- le16_to_cpu(product_info->FirmwareBuildNumber));
- dbg(" ManufactureDescDate %d/%d/%d",
- product_info->ManufactureDescDate[0],
- product_info->ManufactureDescDate[1],
- product_info->ManufactureDescDate[2]+1900);
- dbg(" iDownloadFile 0x%x", product_info->iDownloadFile);
- dbg(" EpicVer %d", product_info->EpicVer);
+ dev_dbg(dev, "**Product Information:\n");
+ dev_dbg(dev, " ProductId %x\n", product_info->ProductId);
+ dev_dbg(dev, " NumPorts %d\n", product_info->NumPorts);
+ dev_dbg(dev, " ProdInfoVer %d\n", product_info->ProdInfoVer);
+ dev_dbg(dev, " IsServer %d\n", product_info->IsServer);
+ dev_dbg(dev, " IsRS232 %d\n", product_info->IsRS232);
+ dev_dbg(dev, " IsRS422 %d\n", product_info->IsRS422);
+ dev_dbg(dev, " IsRS485 %d\n", product_info->IsRS485);
+ dev_dbg(dev, " RomSize %d\n", product_info->RomSize);
+ dev_dbg(dev, " RamSize %d\n", product_info->RamSize);
+ dev_dbg(dev, " CpuRev %x\n", product_info->CpuRev);
+ dev_dbg(dev, " BoardRev %x\n", product_info->BoardRev);
+ dev_dbg(dev, " BootMajorVersion %d.%d.%d\n",
+ product_info->BootMajorVersion,
+ product_info->BootMinorVersion,
+ le16_to_cpu(product_info->BootBuildNumber));
+ dev_dbg(dev, " FirmwareMajorVersion %d.%d.%d\n",
+ product_info->FirmwareMajorVersion,
+ product_info->FirmwareMinorVersion,
+ le16_to_cpu(product_info->FirmwareBuildNumber));
+ dev_dbg(dev, " ManufactureDescDate %d/%d/%d\n",
+ product_info->ManufactureDescDate[0],
+ product_info->ManufactureDescDate[1],
+ product_info->ManufactureDescDate[2]+1900);
+ dev_dbg(dev, " iDownloadFile 0x%x\n",
+ product_info->iDownloadFile);
+ dev_dbg(dev, " EpicVer %d\n", product_info->EpicVer);
}
static void get_product_info(struct edgeport_serial *edge_serial)
product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251;
else
product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930;
-
+
/* Determine Product type and set appropriate flags */
switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) {
case ION_DEVICE_ID_EDGEPORT_COMPATIBLE:
break;
}
- dump_product_info(product_info);
+ dump_product_info(edge_serial, product_info);
}
static int get_epic_descriptor(struct edgeport_serial *ep)
struct edgeport_product_info *product_info = &ep->product_info;
struct edge_compatibility_descriptor *epic = &ep->epic_descriptor;
struct edge_compatibility_bits *bits;
+ struct device *dev = &serial->dev->dev;
ep->is_epic = 0;
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
sizeof(struct edge_compatibility_descriptor),
300);
- dbg("%s result = %d", __func__, result);
-
if (result > 0) {
ep->is_epic = 1;
memset(product_info, 0, sizeof(struct edgeport_product_info));
product_info->EpicVer = epic->EpicVer;
product_info->Epic = epic->Supports;
product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE;
- dump_product_info(product_info);
+ dump_product_info(ep, product_info);
bits = &ep->epic_descriptor.Supports;
- dbg("**EPIC descriptor:");
- dbg(" VendEnableSuspend: %s", bits->VendEnableSuspend ? "TRUE": "FALSE");
- dbg(" IOSPOpen : %s", bits->IOSPOpen ? "TRUE": "FALSE");
- dbg(" IOSPClose : %s", bits->IOSPClose ? "TRUE": "FALSE");
- dbg(" IOSPChase : %s", bits->IOSPChase ? "TRUE": "FALSE");
- dbg(" IOSPSetRxFlow : %s", bits->IOSPSetRxFlow ? "TRUE": "FALSE");
- dbg(" IOSPSetTxFlow : %s", bits->IOSPSetTxFlow ? "TRUE": "FALSE");
- dbg(" IOSPSetXChar : %s", bits->IOSPSetXChar ? "TRUE": "FALSE");
- dbg(" IOSPRxCheck : %s", bits->IOSPRxCheck ? "TRUE": "FALSE");
- dbg(" IOSPSetClrBreak : %s", bits->IOSPSetClrBreak ? "TRUE": "FALSE");
- dbg(" IOSPWriteMCR : %s", bits->IOSPWriteMCR ? "TRUE": "FALSE");
- dbg(" IOSPWriteLCR : %s", bits->IOSPWriteLCR ? "TRUE": "FALSE");
- dbg(" IOSPSetBaudRate : %s", bits->IOSPSetBaudRate ? "TRUE": "FALSE");
- dbg(" TrueEdgeport : %s", bits->TrueEdgeport ? "TRUE": "FALSE");
+ dev_dbg(dev, "**EPIC descriptor:\n");
+ dev_dbg(dev, " VendEnableSuspend: %s\n", bits->VendEnableSuspend ? "TRUE": "FALSE");
+ dev_dbg(dev, " IOSPOpen : %s\n", bits->IOSPOpen ? "TRUE": "FALSE");
+ dev_dbg(dev, " IOSPClose : %s\n", bits->IOSPClose ? "TRUE": "FALSE");
+ dev_dbg(dev, " IOSPChase : %s\n", bits->IOSPChase ? "TRUE": "FALSE");
+ dev_dbg(dev, " IOSPSetRxFlow : %s\n", bits->IOSPSetRxFlow ? "TRUE": "FALSE");
+ dev_dbg(dev, " IOSPSetTxFlow : %s\n", bits->IOSPSetTxFlow ? "TRUE": "FALSE");
+ dev_dbg(dev, " IOSPSetXChar : %s\n", bits->IOSPSetXChar ? "TRUE": "FALSE");
+ dev_dbg(dev, " IOSPRxCheck : %s\n", bits->IOSPRxCheck ? "TRUE": "FALSE");
+ dev_dbg(dev, " IOSPSetClrBreak : %s\n", bits->IOSPSetClrBreak ? "TRUE": "FALSE");
+ dev_dbg(dev, " IOSPWriteMCR : %s\n", bits->IOSPWriteMCR ? "TRUE": "FALSE");
+ dev_dbg(dev, " IOSPWriteLCR : %s\n", bits->IOSPWriteLCR ? "TRUE": "FALSE");
+ dev_dbg(dev, " IOSPSetBaudRate : %s\n", bits->IOSPSetBaudRate ? "TRUE": "FALSE");
+ dev_dbg(dev, " TrueEdgeport : %s\n", bits->TrueEdgeport ? "TRUE": "FALSE");
}
return result;
*****************************************************************************/
static void edge_interrupt_callback(struct urb *urb)
{
- struct edgeport_serial *edge_serial = urb->context;
+ struct edgeport_serial *edge_serial = urb->context;
+ struct device *dev;
struct edgeport_port *edge_port;
struct usb_serial_port *port;
struct tty_struct *tty;
int result;
int status = urb->status;
- dbg("%s", __func__);
-
switch (status) {
case 0:
/* success */
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __func__, status);
+ dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status);
return;
default:
- dbg("%s - nonzero urb status received: %d", __func__, status);
+ dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status);
goto exit;
}
+ dev = &edge_serial->serial->dev->dev;
+
/* process this interrupt-read even if there are no ports open */
if (length) {
- usb_serial_debug_data(debug, &edge_serial->serial->dev->dev,
- __func__, length, data);
+ usb_serial_debug_data(debug, dev, __func__, length, data);
if (length > 1) {
bytes_avail = data[0] | (data[1] << 8);
if (bytes_avail) {
spin_lock(&edge_serial->es_lock);
edge_serial->rxBytesAvail += bytes_avail;
- dbg("%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d", __func__, bytes_avail, edge_serial->rxBytesAvail, edge_serial->read_in_progress);
+ dev_dbg(dev,
+ "%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d\n",
+ __func__, bytes_avail,
+ edge_serial->rxBytesAvail,
+ edge_serial->read_in_progress);
if (edge_serial->rxBytesAvail > 0 &&
!edge_serial->read_in_progress) {
- dbg("%s - posting a read", __func__);
+ dev_dbg(dev, "%s - posting a read\n", __func__);
edge_serial->read_in_progress = true;
/* we have pending bytes on the
bulk in pipe, send a request */
result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
if (result) {
- dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __func__, result);
+ dev_err(dev,
+ "%s - usb_submit_urb(read bulk) failed with result = %d\n",
+ __func__, result);
edge_serial->read_in_progress = false;
}
}
spin_lock(&edge_port->ep_lock);
edge_port->txCredits += txCredits;
spin_unlock(&edge_port->ep_lock);
- dbg("%s - txcredits for port%d = %d",
- __func__, portNumber,
- edge_port->txCredits);
+ dev_dbg(dev, "%s - txcredits for port%d = %d\n",
+ __func__, portNumber,
+ edge_port->txCredits);
/* tell the tty driver that something
has changed */
static void edge_bulk_in_callback(struct urb *urb)
{
struct edgeport_serial *edge_serial = urb->context;
+ struct device *dev;
unsigned char *data = urb->transfer_buffer;
int retval;
__u16 raw_data_length;
int status = urb->status;
- dbg("%s", __func__);
-
if (status) {
- dbg("%s - nonzero read bulk status received: %d",
- __func__, status);
+ dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n",
+ __func__, status);
edge_serial->read_in_progress = false;
return;
}
if (urb->actual_length == 0) {
- dbg("%s - read bulk callback with no data", __func__);
+ dev_dbg(&urb->dev->dev, "%s - read bulk callback with no data\n", __func__);
edge_serial->read_in_progress = false;
return;
}
+ dev = &edge_serial->serial->dev->dev;
raw_data_length = urb->actual_length;
- usb_serial_debug_data(debug, &edge_serial->serial->dev->dev,
- __func__, raw_data_length, data);
+ usb_serial_debug_data(debug, dev, __func__, raw_data_length, data);
spin_lock(&edge_serial->es_lock);
/* decrement our rxBytes available by the number that we just got */
edge_serial->rxBytesAvail -= raw_data_length;
- dbg("%s - Received = %d, rxBytesAvail %d", __func__,
- raw_data_length, edge_serial->rxBytesAvail);
+ dev_dbg(dev, "%s - Received = %d, rxBytesAvail %d\n", __func__,
+ raw_data_length, edge_serial->rxBytesAvail);
process_rcvd_data(edge_serial, data, urb->actual_length);
/* check to see if there's any more data for us to read */
if (edge_serial->rxBytesAvail > 0) {
- dbg("%s - posting a read", __func__);
+ dev_dbg(dev, "%s - posting a read\n", __func__);
retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
if (retval) {
- dev_err(&urb->dev->dev,
- "%s - usb_submit_urb(read bulk) failed, "
- "retval = %d\n", __func__, retval);
+ dev_err(dev,
+ "%s - usb_submit_urb(read bulk) failed, retval = %d\n",
+ __func__, retval);
edge_serial->read_in_progress = false;
}
} else {
struct tty_struct *tty;
int status = urb->status;
- dbg("%s", __func__);
-
if (status) {
- dbg("%s - nonzero write bulk status received: %d",
- __func__, status);
+ dev_dbg(&urb->dev->dev,
+ "%s - nonzero write bulk status received: %d\n",
+ __func__, status);
}
tty = tty_port_tty_get(&edge_port->port->port);
struct tty_struct *tty;
int status = urb->status;
- dbg("%s", __func__);
-
atomic_dec(&CmdUrbs);
- dbg("%s - FREE URB %p (outstanding %d)", __func__,
- urb, atomic_read(&CmdUrbs));
+ dev_dbg(&urb->dev->dev, "%s - FREE URB %p (outstanding %d)\n",
+ __func__, urb, atomic_read(&CmdUrbs));
/* clean up the transfer buffer */
usb_free_urb(urb);
if (status) {
- dbg("%s - nonzero write bulk status received: %d",
- __func__, status);
+ dev_dbg(&urb->dev->dev,
+ "%s - nonzero write bulk status received: %d\n",
+ __func__, status);
return;
}
static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+ struct device *dev = &port->dev;
struct usb_serial *serial;
struct edgeport_serial *edge_serial;
int response;
- dbg("%s - port %d", __func__, port->number);
-
if (edge_port == NULL)
return -ENODEV;
response = usb_submit_urb(edge_serial->interrupt_read_urb,
GFP_KERNEL);
if (response) {
- dev_err(&port->dev,
- "%s - Error %d submitting control urb\n",
- __func__, response);
+ dev_err(dev, "%s - Error %d submitting control urb\n",
+ __func__, response);
}
}
response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0);
if (response < 0) {
- dev_err(&port->dev, "%s - error sending open port command\n",
- __func__);
+ dev_err(dev, "%s - error sending open port command\n", __func__);
edge_port->openPending = false;
return -ENODEV;
}
if (!edge_port->open) {
/* open timed out */
- dbg("%s - open timedout", __func__);
+ dev_dbg(dev, "%s - open timedout\n", __func__);
edge_port->openPending = false;
return -ENODEV;
}
edge_port->txfifo.fifo = kmalloc(edge_port->maxTxCredits, GFP_KERNEL);
if (!edge_port->txfifo.fifo) {
- dbg("%s - no memory", __func__);
+ dev_dbg(dev, "%s - no memory\n", __func__);
edge_close(port);
return -ENOMEM;
}
edge_port->write_in_progress = false;
if (!edge_port->write_urb) {
- dbg("%s - no memory", __func__);
+ dev_dbg(dev, "%s - no memory\n", __func__);
edge_close(port);
return -ENOMEM;
}
- dbg("%s(%d) - Initialize TX fifo to %d bytes",
- __func__, port->number, edge_port->maxTxCredits);
-
- dbg("%s exited", __func__);
+ dev_dbg(dev, "%s(%d) - Initialize TX fifo to %d bytes\n",
+ __func__, port->number, edge_port->maxTxCredits);
return 0;
}
************************************************************************/
static void block_until_chase_response(struct edgeport_port *edge_port)
{
+ struct device *dev = &edge_port->port->dev;
DEFINE_WAIT(wait);
__u16 lastCredits;
int timeout = 1*HZ;
/* Did we get our Chase response */
if (!edge_port->chaseResponsePending) {
- dbg("%s - Got Chase Response", __func__);
+ dev_dbg(dev, "%s - Got Chase Response\n", __func__);
/* did we get all of our credit back? */
if (edge_port->txCredits == edge_port->maxTxCredits) {
- dbg("%s - Got all credits", __func__);
+ dev_dbg(dev, "%s - Got all credits\n", __func__);
return;
}
}
loop--;
if (loop == 0) {
edge_port->chaseResponsePending = false;
- dbg("%s - Chase TIMEOUT", __func__);
+ dev_dbg(dev, "%s - Chase TIMEOUT\n", __func__);
return;
}
} else {
/* Reset timeout value back to 10 seconds */
- dbg("%s - Last %d, Current %d", __func__,
+ dev_dbg(dev, "%s - Last %d, Current %d\n", __func__,
lastCredits, edge_port->txCredits);
loop = 10;
}
************************************************************************/
static void block_until_tx_empty(struct edgeport_port *edge_port)
{
+ struct device *dev = &edge_port->port->dev;
DEFINE_WAIT(wait);
struct TxFifo *fifo = &edge_port->txfifo;
__u32 lastCount;
/* Is the Edgeport Buffer empty? */
if (lastCount == 0) {
- dbg("%s - TX Buffer Empty", __func__);
+ dev_dbg(dev, "%s - TX Buffer Empty\n", __func__);
return;
}
schedule_timeout(timeout);
finish_wait(&edge_port->wait_chase, &wait);
- dbg("%s wait", __func__);
+ dev_dbg(dev, "%s wait\n", __func__);
if (lastCount == fifo->count) {
/* No activity.. count down. */
loop--;
if (loop == 0) {
- dbg("%s - TIMEOUT", __func__);
+ dev_dbg(dev, "%s - TIMEOUT\n", __func__);
return;
}
} else {
struct edgeport_port *edge_port;
int status;
- dbg("%s - port %d", __func__, port->number);
-
edge_serial = usb_get_serial_data(port->serial);
edge_port = usb_get_serial_port_data(port);
if (edge_serial == NULL || edge_port == NULL)
/* flush and chase */
edge_port->chaseResponsePending = true;
- dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__);
+ dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__);
status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
if (status == 0)
/* block until chase finished */
((edge_serial->is_epic) &&
(edge_serial->epic_descriptor.Supports.IOSPClose))) {
/* close the port */
- dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __func__);
+ dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLOSE_PORT\n", __func__);
send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0);
}
}
kfree(edge_port->txfifo.fifo);
edge_port->txfifo.fifo = NULL;
-
- dbg("%s exited", __func__);
}
/*****************************************************************************
int secondhalf;
unsigned long flags;
- dbg("%s - port %d", __func__, port->number);
-
if (edge_port == NULL)
return -ENODEV;
copySize = min((unsigned int)count,
(edge_port->txCredits - fifo->count));
- dbg("%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes",
- __func__, port->number, count,
+ dev_dbg(&port->dev, "%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes\n",
+ __func__, port->number, count,
edge_port->txCredits - fifo->count, copySize);
/* catch writes of 0 bytes which the tty driver likes to give us,
and when txCredits is empty */
if (copySize == 0) {
- dbg("%s - copySize = Zero", __func__);
+ dev_dbg(&port->dev, "%s - copySize = Zero\n", __func__);
goto finish_write;
}
*/
bytesleft = fifo->size - fifo->head;
firsthalf = min(bytesleft, copySize);
- dbg("%s - copy %d bytes of %d into fifo ", __func__,
- firsthalf, bytesleft);
+ dev_dbg(&port->dev, "%s - copy %d bytes of %d into fifo \n", __func__,
+ firsthalf, bytesleft);
/* now copy our data */
memcpy(&fifo->fifo[fifo->head], data, firsthalf);
secondhalf = copySize-firsthalf;
if (secondhalf) {
- dbg("%s - copy rest of data %d", __func__, secondhalf);
+ dev_dbg(&port->dev, "%s - copy rest of data %d\n", __func__, secondhalf);
memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf);
usb_serial_debug_data(debug, &port->dev, __func__,
secondhalf, &fifo->fifo[fifo->head]);
send_more_port_data((struct edgeport_serial *)
usb_get_serial_data(port->serial), edge_port);
- dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__,
- copySize, edge_port->txCredits, fifo->count);
+ dev_dbg(&port->dev, "%s wrote %d byte(s) TxCredits %d, Fifo %d\n",
+ __func__, copySize, edge_port->txCredits, fifo->count);
return copySize;
}
struct edgeport_port *edge_port)
{
struct TxFifo *fifo = &edge_port->txfifo;
+ struct device *dev = &edge_port->port->dev;
struct urb *urb;
unsigned char *buffer;
int status;
int secondhalf;
unsigned long flags;
- dbg("%s(%d)", __func__, edge_port->port->number);
-
spin_lock_irqsave(&edge_port->ep_lock, flags);
if (edge_port->write_in_progress ||
!edge_port->open ||
(fifo->count == 0)) {
- dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d",
- __func__, edge_port->port->number,
- fifo->count, edge_port->write_in_progress);
+ dev_dbg(dev, "%s(%d) EXIT - fifo %d, PendingWrite = %d\n",
+ __func__, edge_port->port->number,
+ fifo->count, edge_port->write_in_progress);
goto exit_send;
}
* it's better to wait for more credits so we can do a larger write.
*/
if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) {
- dbg("%s(%d) Not enough credit - fifo %d TxCredit %d",
+ dev_dbg(dev, "%s(%d) Not enough credit - fifo %d TxCredit %d\n",
__func__, edge_port->port->number, fifo->count,
edge_port->txCredits);
goto exit_send;
edge_port->txCredits += count;
edge_port->icount.tx -= count;
}
- dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d",
- __func__, count, edge_port->txCredits, fifo->count);
+ dev_dbg(dev, "%s wrote %d byte(s) TxCredit %d, Fifo %d\n",
+ __func__, count, edge_port->txCredits, fifo->count);
exit_send:
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
int room;
unsigned long flags;
- dbg("%s", __func__);
-
if (edge_port == NULL)
return 0;
if (edge_port->closePending)
return 0;
- dbg("%s - port %d", __func__, port->number);
-
if (!edge_port->open) {
- dbg("%s - port not opened", __func__);
+ dev_dbg(&port->dev, "%s - port not opened\n", __func__);
return 0;
}
room = edge_port->txCredits - edge_port->txfifo.count;
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- dbg("%s - returns %d", __func__, room);
+ dev_dbg(&port->dev, "%s - returns %d\n", __func__, room);
return room;
}
int num_chars;
unsigned long flags;
- dbg("%s", __func__);
-
if (edge_port == NULL)
return 0;
if (edge_port->closePending)
return 0;
if (!edge_port->open) {
- dbg("%s - port not opened", __func__);
+ dev_dbg(&port->dev, "%s - port not opened\n", __func__);
return 0;
}
edge_port->txfifo.count;
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
if (num_chars) {
- dbg("%s(port %d) - returns %d", __func__,
- port->number, num_chars);
+ dev_dbg(&port->dev, "%s(port %d) - returns %d\n", __func__,
+ port->number, num_chars);
}
return num_chars;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int status;
- dbg("%s - port %d", __func__, port->number);
-
if (edge_port == NULL)
return;
if (!edge_port->open) {
- dbg("%s - port not opened", __func__);
+ dev_dbg(&port->dev, "%s - port not opened\n", __func__);
return;
}
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int status;
- dbg("%s - port %d", __func__, port->number);
-
if (edge_port == NULL)
return;
if (!edge_port->open) {
- dbg("%s - port not opened", __func__);
+ dev_dbg(&port->dev, "%s - port not opened\n", __func__);
return;
}
unsigned int cflag;
cflag = tty->termios->c_cflag;
- dbg("%s - clfag %08x iflag %08x", __func__,
- tty->termios->c_cflag, tty->termios->c_iflag);
- dbg("%s - old clfag %08x old iflag %08x", __func__,
- old_termios->c_cflag, old_termios->c_iflag);
-
- dbg("%s - port %d", __func__, port->number);
+ dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, tty->termios->c_cflag, tty->termios->c_iflag);
+ dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, old_termios->c_cflag, old_termios->c_iflag);
if (edge_port == NULL)
return;
if (!edge_port->open) {
- dbg("%s - port not opened", __func__);
+ dev_dbg(&port->dev, "%s - port not opened\n", __func__);
return;
}
spin_lock_irqsave(&edge_port->ep_lock, flags);
if (edge_port->maxTxCredits == edge_port->txCredits &&
edge_port->txfifo.count == 0) {
- dbg("%s -- Empty", __func__);
+ dev_dbg(&edge_port->port->dev, "%s -- Empty\n", __func__);
result = TIOCSER_TEMT;
}
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned int mcr;
- dbg("%s - port %d", __func__, port->number);
-
mcr = edge_port->shadowMCR;
if (set & TIOCM_RTS)
mcr |= MCR_RTS;
unsigned int msr;
unsigned int mcr;
- dbg("%s - port %d", __func__, port->number);
-
msr = edge_port->shadowMSR;
mcr = edge_port->shadowMCR;
result = ((mcr & MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */
| ((msr & EDGEPORT_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */
| ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */
-
- dbg("%s -- %x", __func__, result);
-
return result;
}
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
- dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
- __func__, port->number, icount->rx, icount->tx);
+ dev_dbg(&port->dev, "%s (%d) TIOCGICOUNT RX=%d, TX=%d\n", __func__,
+ port->number, icount->rx, icount->tx);
return 0;
}
struct async_icount cnow;
struct async_icount cprev;
- dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
+ dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd);
switch (cmd) {
case TIOCSERGETLSR:
- dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
+ dev_dbg(&port->dev, "%s (%d) TIOCSERGETLSR\n", __func__, port->number);
return get_lsr_info(edge_port, (unsigned int __user *) arg);
case TIOCGSERIAL:
- dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
+ dev_dbg(&port->dev, "%s (%d) TIOCGSERIAL\n", __func__, port->number);
return get_serial_info(edge_port, (struct serial_struct __user *) arg);
case TIOCMIWAIT:
- dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
+ dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, port->number);
cprev = edge_port->icount;
while (1) {
prepare_to_wait(&edge_port->delta_msr_wait,
/* flush and chase */
edge_port->chaseResponsePending = true;
- dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__);
+ dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__);
status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
if (status == 0) {
/* block until chase finished */
((edge_serial->is_epic) &&
(edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) {
if (break_state == -1) {
- dbg("%s - Sending IOSP_CMD_SET_BREAK", __func__);
+ dev_dbg(&port->dev, "%s - Sending IOSP_CMD_SET_BREAK\n", __func__);
status = send_iosp_ext_cmd(edge_port,
IOSP_CMD_SET_BREAK, 0);
} else {
- dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __func__);
+ dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLEAR_BREAK\n", __func__);
status = send_iosp_ext_cmd(edge_port,
IOSP_CMD_CLEAR_BREAK, 0);
}
if (status)
- dbg("%s - error sending break set/clear command.",
+ dev_dbg(&port->dev, "%s - error sending break set/clear command.\n",
__func__);
}
}
static void process_rcvd_data(struct edgeport_serial *edge_serial,
unsigned char *buffer, __u16 bufferLength)
{
+ struct device *dev = &edge_serial->serial->dev->dev;
struct usb_serial_port *port;
struct edgeport_port *edge_port;
struct tty_struct *tty;
__u16 lastBufferLength;
__u16 rxLen;
- dbg("%s", __func__);
-
lastBufferLength = bufferLength + 1;
while (bufferLength > 0) {
/* failsafe incase we get a message that we don't understand */
if (lastBufferLength == bufferLength) {
- dbg("%s - stuck in loop, exiting it.", __func__);
+ dev_dbg(dev, "%s - stuck in loop, exiting it.\n", __func__);
break;
}
lastBufferLength = bufferLength;
++buffer;
--bufferLength;
- dbg("%s - Hdr1=%02X Hdr2=%02X", __func__,
- edge_serial->rxHeader1, edge_serial->rxHeader2);
+ dev_dbg(dev, "%s - Hdr1=%02X Hdr2=%02X\n", __func__,
+ edge_serial->rxHeader1, edge_serial->rxHeader2);
/* Process depending on whether this header is
* data or status */
IOSP_GET_HDR_DATA_LEN(
edge_serial->rxHeader1,
edge_serial->rxHeader2);
- dbg("%s - Data for Port %u Len %u",
- __func__,
- edge_serial->rxPort,
- edge_serial->rxBytesRemaining);
+ dev_dbg(dev, "%s - Data for Port %u Len %u\n",
+ __func__,
+ edge_serial->rxPort,
+ edge_serial->rxBytesRemaining);
/* ASSERT(DevExt->RxPort < DevExt->NumPorts);
* ASSERT(DevExt->RxBytesRemaining <
tty = tty_port_tty_get(
&edge_port->port->port);
if (tty) {
- dbg("%s - Sending %d bytes to TTY for port %d",
+ dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n",
__func__, rxLen, edge_serial->rxPort);
edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
tty_kref_put(tty);
struct usb_serial_port *port;
struct edgeport_port *edge_port;
struct tty_struct *tty;
+ struct device *dev;
__u8 code = edge_serial->rxStatusCode;
/* switch the port pointer to the one being currently talked about */
__func__, edge_serial->rxPort);
return;
}
-
- dbg("%s - port %d", __func__, edge_serial->rxPort);
+ dev = &port->dev;
if (code == IOSP_EXT_STATUS) {
switch (byte2) {
case IOSP_EXT_STATUS_CHASE_RSP:
/* we want to do EXT status regardless of port
* open/closed */
- dbg("%s - Port %u EXT CHASE_RSP Data = %02x",
- __func__, edge_serial->rxPort, byte3);
+ dev_dbg(dev, "%s - Port %u EXT CHASE_RSP Data = %02x\n",
+ __func__, edge_serial->rxPort, byte3);
/* Currently, the only EXT_STATUS is Chase, so process
* here instead of one more call to one more subroutine
* If/when more EXT_STATUS, there'll be more work to do
return;
case IOSP_EXT_STATUS_RX_CHECK_RSP:
- dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============", __func__, edge_serial->rxPort, byte3);
+ dev_dbg(dev, "%s ========== Port %u CHECK_RSP Sequence = %02x =============\n",
+ __func__, edge_serial->rxPort, byte3);
/* Port->RxCheckRsp = true; */
return;
}
if (code == IOSP_STATUS_OPEN_RSP) {
edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
edge_port->maxTxCredits = edge_port->txCredits;
- dbg("%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
+ dev_dbg(dev, "%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d\n",
+ __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
handle_new_msr(edge_port, byte2);
/* send the current line settings to the port so we are
switch (code) {
/* Not currently sent by Edgeport */
case IOSP_STATUS_LSR:
- dbg("%s - Port %u LSR Status = %02x",
- __func__, edge_serial->rxPort, byte2);
+ dev_dbg(dev, "%s - Port %u LSR Status = %02x\n",
+ __func__, edge_serial->rxPort, byte2);
handle_new_lsr(edge_port, false, byte2, 0);
break;
case IOSP_STATUS_LSR_DATA:
- dbg("%s - Port %u LSR Status = %02x, Data = %02x",
- __func__, edge_serial->rxPort, byte2, byte3);
+ dev_dbg(dev, "%s - Port %u LSR Status = %02x, Data = %02x\n",
+ __func__, edge_serial->rxPort, byte2, byte3);
/* byte2 is LSR Register */
/* byte3 is broken data byte */
handle_new_lsr(edge_port, true, byte2, byte3);
break;
/*
* case IOSP_EXT_4_STATUS:
- * dbg("%s - Port %u LSR Status = %02x Data = %02x",
+ * dev_dbg(dev, "%s - Port %u LSR Status = %02x Data = %02x\n",
* __func__, edge_serial->rxPort, byte2, byte3);
* break;
*/
case IOSP_STATUS_MSR:
- dbg("%s - Port %u MSR Status = %02x",
- __func__, edge_serial->rxPort, byte2);
+ dev_dbg(dev, "%s - Port %u MSR Status = %02x\n",
+ __func__, edge_serial->rxPort, byte2);
/*
* Process this new modem status and generate appropriate
* events, etc, based on the new status. This routine
break;
default:
- dbg("%s - Unrecognized IOSP status code %u", __func__, code);
+ dev_dbg(dev, "%s - Unrecognized IOSP status code %u\n", __func__, code);
break;
}
}
{
struct async_icount *icount;
- dbg("%s %02x", __func__, newMsr);
-
if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
icount = &edge_port->icount;
(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
struct async_icount *icount;
- dbg("%s - %02x", __func__, newLsr);
-
edge_port->shadowLSR = lsr;
if (newLsr & LSR_BREAK) {
__u16 current_length;
unsigned char *transfer_buffer;
- dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
+ dev_dbg(&serial->dev->dev, "%s - %x, %x, %d\n", __func__, extAddr, addr, length);
transfer_buffer = kmalloc(64, GFP_KERNEL);
if (!transfer_buffer) {
else
current_length = length;
-/* dbg("%s - writing %x, %x, %d", __func__,
- extAddr, addr, current_length); */
+/* dev_dbg(&serial->dev->dev, "%s - writing %x, %x, %d\n", __func__, extAddr, addr, current_length); */
memcpy(transfer_buffer, data, current_length);
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
__u16 current_length;
unsigned char *transfer_buffer;
-/* dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); */
-
transfer_buffer = kmalloc(64, GFP_KERNEL);
if (!transfer_buffer) {
dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
current_length = 64;
else
current_length = length;
-/* dbg("%s - writing %x, %x, %d", __func__,
- extAddr, addr, current_length); */
memcpy(transfer_buffer, data, current_length);
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
__u16 current_length;
unsigned char *transfer_buffer;
- dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
-
transfer_buffer = kmalloc(64, GFP_KERNEL);
if (!transfer_buffer) {
dev_err(&serial->dev->dev,
current_length = 64;
else
current_length = length;
-/* dbg("%s - %x, %x, %d", __func__,
- extAddr, addr, current_length); */
result = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
USB_REQUEST_ION_READ_ROM,
int length = 0;
int status = 0;
- dbg("%s - %d, %d", __func__, command, param);
-
buffer = kmalloc(10, GFP_ATOMIC);
if (!buffer) {
dev_err(&edge_port->port->dev,
{
struct edgeport_serial *edge_serial =
usb_get_serial_data(edge_port->port->serial);
+ struct device *dev = &edge_port->port->dev;
int status = 0;
struct urb *urb;
- usb_serial_debug_data(debug, &edge_port->port->dev,
- __func__, length, buffer);
+ usb_serial_debug_data(debug, dev, __func__, length, buffer);
/* Allocate our next urb */
urb = usb_alloc_urb(0, GFP_ATOMIC);
return -ENOMEM;
atomic_inc(&CmdUrbs);
- dbg("%s - ALLOCATE URB %p (outstanding %d)",
- __func__, urb, atomic_read(&CmdUrbs));
+ dev_dbg(dev, "%s - ALLOCATE URB %p (outstanding %d)\n",
+ __func__, urb, atomic_read(&CmdUrbs));
usb_fill_bulk_urb(urb, edge_serial->serial->dev,
usb_sndbulkpipe(edge_serial->serial->dev,
if (status) {
/* something went wrong */
- dev_err(&edge_port->port->dev,
- "%s - usb_submit_urb(write command) failed, status = %d\n",
- __func__, status);
+ dev_err(dev, "%s - usb_submit_urb(write command) failed, status = %d\n",
+ __func__, status);
usb_kill_urb(urb);
usb_free_urb(urb);
atomic_dec(&CmdUrbs);
if (edge_port->commandPending) {
/* command timed out */
- dbg("%s - command timed out", __func__);
+ dev_dbg(dev, "%s - command timed out\n", __func__);
status = -EINVAL;
}
#endif
{
struct edgeport_serial *edge_serial =
usb_get_serial_data(edge_port->port->serial);
+ struct device *dev = &edge_port->port->dev;
unsigned char *cmdBuffer;
unsigned char *currCmd;
int cmdLen = 0;
if (edge_serial->is_epic &&
!edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) {
- dbg("SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d",
- edge_port->port->number, baudRate);
+ dev_dbg(dev, "SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d\n",
+ edge_port->port->number, baudRate);
return 0;
}
- dbg("%s - port = %d, baud = %d", __func__,
- edge_port->port->number, baudRate);
+ dev_dbg(dev, "%s - port = %d, baud = %d\n", __func__,
+ edge_port->port->number, baudRate);
- status = calc_baud_rate_divisor(baudRate, &divisor);
+ status = calc_baud_rate_divisor(dev, baudRate, &divisor);
if (status) {
- dev_err(&edge_port->port->dev, "%s - bad baud rate\n",
- __func__);
+ dev_err(dev, "%s - bad baud rate\n", __func__);
return status;
}
/* Alloc memory for the string of commands. */
cmdBuffer = kmalloc(0x100, GFP_ATOMIC);
if (!cmdBuffer) {
- dev_err(&edge_port->port->dev,
- "%s - kmalloc(%d) failed.\n", __func__, 0x100);
+ dev_err(dev, "%s - kmalloc(%d) failed.\n", __func__, 0x100);
return -ENOMEM;
}
currCmd = cmdBuffer;
* this function calculates the proper baud rate divisor for the specified
* baud rate.
*****************************************************************************/
-static int calc_baud_rate_divisor(int baudrate, int *divisor)
+static int calc_baud_rate_divisor(struct device *dev, int baudrate, int *divisor)
{
int i;
__u16 custom;
-
- dbg("%s - %d", __func__, baudrate);
-
for (i = 0; i < ARRAY_SIZE(divisor_table); i++) {
if (divisor_table[i].BaudRate == baudrate) {
*divisor = divisor_table[i].Divisor;
*divisor = custom;
- dbg("%s - Baud %d = %d", __func__, baudrate, custom);
+ dev_dbg(dev, "%s - Baud %d = %d\n", __func__, baudrate, custom);
return 0;
}
{
struct edgeport_serial *edge_serial =
usb_get_serial_data(edge_port->port->serial);
+ struct device *dev = &edge_port->port->dev;
unsigned char *cmdBuffer;
unsigned char *currCmd;
unsigned long cmdLen = 0;
int status;
- dbg("%s - write to %s register 0x%02x",
- (regNum == MCR) ? "MCR" : "LCR", __func__, regValue);
+ dev_dbg(dev, "%s - write to %s register 0x%02x\n",
+ (regNum == MCR) ? "MCR" : "LCR", __func__, regValue);
if (edge_serial->is_epic &&
!edge_serial->epic_descriptor.Supports.IOSPWriteMCR &&
regNum == MCR) {
- dbg("SendCmdWriteUartReg - Not writing to MCR Register");
+ dev_dbg(dev, "SendCmdWriteUartReg - Not writing to MCR Register\n");
return 0;
}
if (edge_serial->is_epic &&
!edge_serial->epic_descriptor.Supports.IOSPWriteLCR &&
regNum == LCR) {
- dbg("SendCmdWriteUartReg - Not writing to LCR Register");
+ dev_dbg(dev, "SendCmdWriteUartReg - Not writing to LCR Register\n");
return 0;
}
static void change_port_settings(struct tty_struct *tty,
struct edgeport_port *edge_port, struct ktermios *old_termios)
{
+ struct device *dev = &edge_port->port->dev;
struct edgeport_serial *edge_serial =
usb_get_serial_data(edge_port->port->serial);
int baud;
__u8 txFlow;
int status;
- dbg("%s - port %d", __func__, edge_port->port->number);
+ dev_dbg(dev, "%s - port %d\n", __func__, edge_port->port->number);
if (!edge_port->open &&
!edge_port->openPending) {
- dbg("%s - port not opened", __func__);
+ dev_dbg(dev, "%s - port not opened\n", __func__);
return;
}
switch (cflag & CSIZE) {
case CS5:
lData = LCR_BITS_5; mask = 0x1f;
- dbg("%s - data bits = 5", __func__);
+ dev_dbg(dev, "%s - data bits = 5\n", __func__);
break;
case CS6:
lData = LCR_BITS_6; mask = 0x3f;
- dbg("%s - data bits = 6", __func__);
+ dev_dbg(dev, "%s - data bits = 6\n", __func__);
break;
case CS7:
lData = LCR_BITS_7; mask = 0x7f;
- dbg("%s - data bits = 7", __func__);
+ dev_dbg(dev, "%s - data bits = 7\n", __func__);
break;
default:
case CS8:
lData = LCR_BITS_8;
- dbg("%s - data bits = 8", __func__);
+ dev_dbg(dev, "%s - data bits = 8\n", __func__);
break;
}
if (cflag & CMSPAR) {
if (cflag & PARODD) {
lParity = LCR_PAR_MARK;
- dbg("%s - parity = mark", __func__);
+ dev_dbg(dev, "%s - parity = mark\n", __func__);
} else {
lParity = LCR_PAR_SPACE;
- dbg("%s - parity = space", __func__);
+ dev_dbg(dev, "%s - parity = space\n", __func__);
}
} else if (cflag & PARODD) {
lParity = LCR_PAR_ODD;
- dbg("%s - parity = odd", __func__);
+ dev_dbg(dev, "%s - parity = odd\n", __func__);
} else {
lParity = LCR_PAR_EVEN;
- dbg("%s - parity = even", __func__);
+ dev_dbg(dev, "%s - parity = even\n", __func__);
}
} else {
- dbg("%s - parity = none", __func__);
+ dev_dbg(dev, "%s - parity = none\n", __func__);
}
if (cflag & CSTOPB) {
lStop = LCR_STOP_2;
- dbg("%s - stop bits = 2", __func__);
+ dev_dbg(dev, "%s - stop bits = 2\n", __func__);
} else {
lStop = LCR_STOP_1;
- dbg("%s - stop bits = 1", __func__);
+ dev_dbg(dev, "%s - stop bits = 1\n", __func__);
}
/* figure out the flow control settings */
if (cflag & CRTSCTS) {
rxFlow |= IOSP_RX_FLOW_RTS;
txFlow |= IOSP_TX_FLOW_CTS;
- dbg("%s - RTS/CTS is enabled", __func__);
+ dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__);
} else {
- dbg("%s - RTS/CTS is disabled", __func__);
+ dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__);
}
/* if we are implementing XON/XOFF, set the start and stop character
/* if we are implementing INBOUND XON/XOFF */
if (I_IXOFF(tty)) {
rxFlow |= IOSP_RX_FLOW_XON_XOFF;
- dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
- __func__, start_char, stop_char);
+ dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
+ __func__, start_char, stop_char);
} else {
- dbg("%s - INBOUND XON/XOFF is disabled", __func__);
+ dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__);
}
/* if we are implementing OUTBOUND XON/XOFF */
if (I_IXON(tty)) {
txFlow |= IOSP_TX_FLOW_XON_XOFF;
- dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
- __func__, start_char, stop_char);
+ dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
+ __func__, start_char, stop_char);
} else {
- dbg("%s - OUTBOUND XON/XOFF is disabled", __func__);
+ dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__);
}
}
baud = 9600;
}
- dbg("%s - baud rate = %d", __func__, baud);
+ dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
status = send_cmd_write_baud_rate(edge_port, baud);
if (status == -1) {
/* Speed change was not possible - put back the old speed */
****************************************************************************/
static void get_manufacturing_desc(struct edgeport_serial *edge_serial)
{
+ struct device *dev = &edge_serial->serial->dev->dev;
int response;
- dbg("getting manufacturer descriptor");
+ dev_dbg(dev, "getting manufacturer descriptor\n");
response = rom_read(edge_serial->serial,
(EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16,
(__u8 *)(&edge_serial->manuf_descriptor));
if (response < 1)
- dev_err(&edge_serial->serial->dev->dev,
- "error in getting manufacturer descriptor\n");
+ dev_err(dev, "error in getting manufacturer descriptor\n");
else {
char string[30];
- dbg("**Manufacturer Descriptor");
- dbg(" RomSize: %dK",
+ dev_dbg(dev, "**Manufacturer Descriptor\n");
+ dev_dbg(dev, " RomSize: %dK\n",
edge_serial->manuf_descriptor.RomSize);
- dbg(" RamSize: %dK",
+ dev_dbg(dev, " RamSize: %dK\n",
edge_serial->manuf_descriptor.RamSize);
- dbg(" CpuRev: %d",
+ dev_dbg(dev, " CpuRev: %d\n",
edge_serial->manuf_descriptor.CpuRev);
- dbg(" BoardRev: %d",
+ dev_dbg(dev, " BoardRev: %d\n",
edge_serial->manuf_descriptor.BoardRev);
- dbg(" NumPorts: %d",
+ dev_dbg(dev, " NumPorts: %d\n",
edge_serial->manuf_descriptor.NumPorts);
- dbg(" DescDate: %d/%d/%d",
+ dev_dbg(dev, " DescDate: %d/%d/%d\n",
edge_serial->manuf_descriptor.DescDate[0],
edge_serial->manuf_descriptor.DescDate[1],
edge_serial->manuf_descriptor.DescDate[2]+1900);
unicode_to_ascii(string, sizeof(string),
edge_serial->manuf_descriptor.SerialNumber,
edge_serial->manuf_descriptor.SerNumLength/2);
- dbg(" SerialNumber: %s", string);
+ dev_dbg(dev, " SerialNumber: %s\n", string);
unicode_to_ascii(string, sizeof(string),
edge_serial->manuf_descriptor.AssemblyNumber,
edge_serial->manuf_descriptor.AssemblyNumLength/2);
- dbg(" AssemblyNumber: %s", string);
+ dev_dbg(dev, " AssemblyNumber: %s\n", string);
unicode_to_ascii(string, sizeof(string),
edge_serial->manuf_descriptor.OemAssyNumber,
edge_serial->manuf_descriptor.OemAssyNumLength/2);
- dbg(" OemAssyNumber: %s", string);
- dbg(" UartType: %d",
+ dev_dbg(dev, " OemAssyNumber: %s\n", string);
+ dev_dbg(dev, " UartType: %d\n",
edge_serial->manuf_descriptor.UartType);
- dbg(" IonPid: %d",
+ dev_dbg(dev, " IonPid: %d\n",
edge_serial->manuf_descriptor.IonPid);
- dbg(" IonConfig: %d",
+ dev_dbg(dev, " IonConfig: %d\n",
edge_serial->manuf_descriptor.IonConfig);
}
}
****************************************************************************/
static void get_boot_desc(struct edgeport_serial *edge_serial)
{
+ struct device *dev = &edge_serial->serial->dev->dev;
int response;
- dbg("getting boot descriptor");
+ dev_dbg(dev, "getting boot descriptor\n");
response = rom_read(edge_serial->serial,
(EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16,
(__u8 *)(&edge_serial->boot_descriptor));
if (response < 1)
- dev_err(&edge_serial->serial->dev->dev,
- "error in getting boot descriptor\n");
+ dev_err(dev, "error in getting boot descriptor\n");
else {
- dbg("**Boot Descriptor:");
- dbg(" BootCodeLength: %d",
- le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength));
- dbg(" MajorVersion: %d",
+ dev_dbg(dev, "**Boot Descriptor:\n");
+ dev_dbg(dev, " BootCodeLength: %d\n",
+ le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength));
+ dev_dbg(dev, " MajorVersion: %d\n",
edge_serial->boot_descriptor.MajorVersion);
- dbg(" MinorVersion: %d",
+ dev_dbg(dev, " MinorVersion: %d\n",
edge_serial->boot_descriptor.MinorVersion);
- dbg(" BuildNumber: %d",
+ dev_dbg(dev, " BuildNumber: %d\n",
le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
- dbg(" Capabilities: 0x%x",
+ dev_dbg(dev, " Capabilities: 0x%x\n",
le16_to_cpu(edge_serial->boot_descriptor.Capabilities));
- dbg(" UConfig0: %d",
+ dev_dbg(dev, " UConfig0: %d\n",
edge_serial->boot_descriptor.UConfig0);
- dbg(" UConfig1: %d",
+ dev_dbg(dev, " UConfig1: %d\n",
edge_serial->boot_descriptor.UConfig1);
}
}
****************************************************************************/
static void load_application_firmware(struct edgeport_serial *edge_serial)
{
+ struct device *dev = &edge_serial->serial->dev->dev;
const struct ihex_binrec *rec;
const struct firmware *fw;
const char *fw_name;
break;
case EDGE_DOWNLOAD_FILE_NONE:
- dbg("No download file specified, skipping download");
+ dev_dbg(dev, "No download file specified, skipping download\n");
return;
default:
response = request_ihex_firmware(&fw, fw_name,
&edge_serial->serial->dev->dev);
if (response) {
- printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
+ dev_err(dev, "Failed to load image \"%s\" err %d\n",
fw_name, response);
return;
}
rec = (const struct ihex_binrec *)fw->data;
build = (rec->data[2] << 8) | rec->data[3];
- dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build);
+ dev_dbg(dev, "%s %d.%d.%d\n", fw_info, rec->data[0], rec->data[1], build);
edge_serial->product_info.FirmwareMajorVersion = rec->data[0];
edge_serial->product_info.FirmwareMinorVersion = rec->data[1];
}
}
- dbg("sending exec_dl_code");
- response = usb_control_msg (edge_serial->serial->dev,
- usb_sndctrlpipe(edge_serial->serial->dev, 0),
- USB_REQUEST_ION_EXEC_DL_CODE,
+ dev_dbg(dev, "sending exec_dl_code\n");
+ response = usb_control_msg (edge_serial->serial->dev,
+ usb_sndctrlpipe(edge_serial->serial->dev, 0),
+ USB_REQUEST_ION_EXEC_DL_CODE,
0x40, 0x4000, 0x0001, NULL, 0, 3000);
release_firmware(fw);
struct edgeport_serial *edge_serial;
struct edgeport_port *edge_port;
struct usb_device *dev;
+ struct device *ddev = &serial->dev->dev;
int i, j;
int response;
bool interrupt_in_found;
/* serial->num_ports = serial->product_info.NumPorts; */
if ((!edge_serial->is_epic) &&
(edge_serial->product_info.NumPorts != serial->num_ports)) {
- dev_warn(&serial->dev->dev, "Device Reported %d serial ports "
- "vs. core thinking we have %d ports, email "
- "greg@kroah.com this information.\n",
+ dev_warn(ddev,
+ "Device Reported %d serial ports vs. core thinking we have %d ports, email greg@kroah.com this information.\n",
edge_serial->product_info.NumPorts,
serial->num_ports);
}
- dbg("%s - time 1 %ld", __func__, jiffies);
+ dev_dbg(ddev, "%s - time 1 %ld\n", __func__, jiffies);
/* If not an EPiC device */
if (!edge_serial->is_epic) {
/* now load the application firmware into this device */
load_application_firmware(edge_serial);
- dbg("%s - time 2 %ld", __func__, jiffies);
+ dev_dbg(ddev, "%s - time 2 %ld\n", __func__, jiffies);
/* Check current Edgeport EEPROM and update if necessary */
update_edgeport_E2PROM(edge_serial);
- dbg("%s - time 3 %ld", __func__, jiffies);
+ dev_dbg(ddev, "%s - time 3 %ld\n", __func__, jiffies);
/* set the configuration to use #1 */
-/* dbg("set_configuration 1"); */
+/* dev_dbg(ddev, "set_configuration 1\n"); */
/* usb_set_configuration (dev, 1); */
}
- dbg(" FirmwareMajorVersion %d.%d.%d",
+ dev_dbg(ddev, " FirmwareMajorVersion %d.%d.%d\n",
edge_serial->product_info.FirmwareMajorVersion,
edge_serial->product_info.FirmwareMinorVersion,
le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber));
for (i = 0; i < serial->num_ports; ++i) {
edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL);
if (edge_port == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n",
- __func__);
+ dev_err(ddev, "%s - Out of memory\n", __func__);
for (j = 0; j < i; ++j) {
kfree(usb_get_serial_port_data(serial->port[j]));
usb_set_serial_port_data(serial->port[j],
if (!interrupt_in_found &&
(usb_endpoint_is_int_in(endpoint))) {
/* we found a interrupt in endpoint */
- dbg("found interrupt in");
+ dev_dbg(ddev, "found interrupt in\n");
/* not set up yet, so do it now */
edge_serial->interrupt_read_urb =
usb_alloc_urb(0, GFP_KERNEL);
if (!edge_serial->interrupt_read_urb) {
- dev_err(&dev->dev, "out of memory\n");
+ dev_err(ddev, "out of memory\n");
return -ENOMEM;
}
edge_serial->interrupt_in_buffer =
kmalloc(buffer_size, GFP_KERNEL);
if (!edge_serial->interrupt_in_buffer) {
- dev_err(&dev->dev, "out of memory\n");
+ dev_err(ddev, "out of memory\n");
usb_free_urb(edge_serial->interrupt_read_urb);
return -ENOMEM;
}
if (!bulk_in_found &&
(usb_endpoint_is_bulk_in(endpoint))) {
/* we found a bulk in endpoint */
- dbg("found bulk in");
+ dev_dbg(ddev, "found bulk in\n");
/* not set up yet, so do it now */
edge_serial->read_urb =
usb_alloc_urb(0, GFP_KERNEL);
if (!edge_serial->read_urb) {
- dev_err(&dev->dev, "out of memory\n");
+ dev_err(ddev, "out of memory\n");
return -ENOMEM;
}
edge_serial->bulk_in_buffer =
if (!bulk_out_found &&
(usb_endpoint_is_bulk_out(endpoint))) {
/* we found a bulk out endpoint */
- dbg("found bulk out");
+ dev_dbg(ddev, "found bulk out\n");
edge_serial->bulk_out_endpoint =
endpoint->bEndpointAddress;
bulk_out_found = true;
}
if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) {
- dev_err(&dev->dev, "Error - the proper endpoints "
- "were not found!\n");
+ dev_err(ddev, "Error - the proper endpoints were not found!\n");
return -ENODEV;
}
response = usb_submit_urb(edge_serial->interrupt_read_urb,
GFP_KERNEL);
if (response)
- dev_err(&dev->dev,
- "%s - Error %d submitting control urb\n",
+ dev_err(ddev, "%s - Error %d submitting control urb\n",
__func__, response);
}
return response;
{
struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
- dbg("%s", __func__);
-
/* stop reads and writes on all ports */
/* free up our endpoint stuff */
if (edge_serial->is_epic) {
struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
int i;
- dbg("%s", __func__);
-
for (i = 0; i < serial->num_ports; ++i)
kfree(usb_get_serial_port_data(serial->port[i]));
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff