* %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
* %NL80211_ATTR_WIPHY_CHANNEL_TYPE.
*
+ * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
+ * its %NL80211_ATTR_WDEV identifier. It must have been created with
+ * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
+ * P2P Device can be used for P2P operations, e.g. remain-on-channel and
+ * public action frame TX.
+ * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
+ * its %NL80211_ATTR_WDEV identifier.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
NL80211_CMD_CH_SWITCH_NOTIFY,
+ NL80211_CMD_START_P2P_DEVICE,
+ NL80211_CMD_STOP_P2P_DEVICE,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
* @NL80211_IFTYPE_MESH_POINT: mesh point
* @NL80211_IFTYPE_P2P_CLIENT: P2P client
* @NL80211_IFTYPE_P2P_GO: P2P group owner
+ * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
+ * and therefore can't be created in the normal ways, use the
+ * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
+ * commands to create and destroy one
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
* @NUM_NL80211_IFTYPES: number of defined interface types
*
NL80211_IFTYPE_MESH_POINT,
NL80211_IFTYPE_P2P_CLIENT,
NL80211_IFTYPE_P2P_GO,
+ NL80211_IFTYPE_P2P_DEVICE,
/* keep last */
NUM_NL80211_IFTYPES,
* @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
* to work properly to suppport receiving regulatory hints from
* cellular base stations.
+ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
+ * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
+ * in the interface combinations, even when it's only used for scan
+ * and remain-on-channel. This could be due to, for example, the
+ * remain-on-channel implementation requiring a channel context.
*/
enum nl80211_feature_flags {
- NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
- NL80211_FEATURE_HT_IBSS = 1 << 1,
- NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
- NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
+ NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
+ NL80211_FEATURE_HT_IBSS = 1 << 1,
+ NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
+ NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
+ NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4,
};
/**
* @add_virtual_intf: create a new virtual interface with the given name,
* must set the struct wireless_dev's iftype. Beware: You must create
* the new netdev in the wiphy's network namespace! Returns the struct
- * wireless_dev, or an ERR_PTR.
+ * wireless_dev, or an ERR_PTR. For P2P device wdevs, the driver must
+ * also set the address member in the wdev.
*
* @del_virtual_intf: remove the virtual interface
*
* @get_channel: Get the current operating channel for the virtual interface.
* For monitor interfaces, it should return %NULL unless there's a single
* current monitoring channel.
+ *
+ * @start_p2p_device: Start the given P2P device.
+ * @stop_p2p_device: Stop the given P2P device.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
(*get_channel)(struct wiphy *wiphy,
struct wireless_dev *wdev,
enum nl80211_channel_type *type);
+
+ int (*start_p2p_device)(struct wiphy *wiphy,
+ struct wireless_dev *wdev);
+ void (*stop_p2p_device)(struct wiphy *wiphy,
+ struct wireless_dev *wdev);
};
/*
* @cleanup_work: work struct used for cleanup that can't be done directly
* @beacon_interval: beacon interval used on this device for transmitting
* beacons, 0 when not valid
+ * @address: The address for this device, valid only if @netdev is %NULL
+ * @p2p_started: true if this is a P2P Device that has been started
*/
struct wireless_dev {
struct wiphy *wiphy;
struct work_struct cleanup_work;
- bool use_4addr;
+ bool use_4addr, p2p_started;
+
+ u8 address[ETH_ALEN] __aligned(sizeof(u16));
/* currently used for IBSS and SME - might be rearranged later */
u8 ssid[IEEE80211_MAX_SSID_LEN];
#endif
};
+static inline u8 *wdev_address(struct wireless_dev *wdev)
+{
+ if (wdev->netdev)
+ return wdev->netdev->dev_addr;
+ return wdev->address;
+}
+
/**
* wdev_priv - return wiphy priv from wireless_dev
*
*/
u32 cfg80211_calculate_bitrate(struct rate_info *rate);
+/**
+ * cfg80211_unregister_wdev - remove the given wdev
+ * @wdev: struct wireless_dev to remove
+ *
+ * Call this function only for wdevs that have no netdev assigned,
+ * e.g. P2P Devices. It removes the device from the list so that
+ * it can no longer be used. It is necessary to call this function
+ * even when cfg80211 requests the removal of the interface by
+ * calling the del_virtual_intf() callback. The function must also
+ * be called when the driver wishes to unregister the wdev, e.g.
+ * when the device is unbound from the driver.
+ *
+ * Requires the RTNL to be held.
+ */
+void cfg80211_unregister_wdev(struct wireless_dev *wdev);
+
/* Logging, debugging and troubleshooting/diagnostic helpers. */
/* wiphy_printk helpers, similar to dev_printk */
case NUM_NL80211_IFTYPES:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_P2P_GO:
+ case NL80211_IFTYPE_P2P_DEVICE:
/* cannot happen */
WARN_ON(1);
break;
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_AP_VLAN:
break;
+ case NL80211_IFTYPE_P2P_DEVICE:
+ /* not yet supported */
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
BUG();
case NL80211_IFTYPE_MONITOR:
/* ignore virtual */
break;
+ case NL80211_IFTYPE_P2P_DEVICE:
+ /* not yet supported */
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
case NL80211_IFTYPE_P2P_CLIENT:
ASSERT_WDEV_LOCK(wdev);
- if (!netif_running(wdev->netdev))
+ if (wdev->netdev && !netif_running(wdev->netdev))
return;
switch (wdev->iftype) {
case NL80211_IFTYPE_WDS:
/* these interface types don't really have a channel */
return;
+ case NL80211_IFTYPE_P2P_DEVICE:
+ if (wdev->wiphy->features &
+ NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL)
+ *chanmode = CHAN_MODE_EXCLUSIVE;
+ return;
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
WARN_ON(1);
rtnl_lock();
mutex_lock(&rdev->devlist_mtx);
- list_for_each_entry(wdev, &rdev->wdev_list, list)
- if (wdev->netdev)
+ list_for_each_entry(wdev, &rdev->wdev_list, list) {
+ if (wdev->netdev) {
dev_close(wdev->netdev);
+ continue;
+ }
+ /* otherwise, check iftype */
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_P2P_DEVICE:
+ if (!wdev->p2p_started)
+ break;
+ rdev->ops->stop_p2p_device(&rdev->wiphy, wdev);
+ wdev->p2p_started = false;
+ rdev->opencount--;
+ break;
+ default:
+ break;
+ }
+ }
mutex_unlock(&rdev->devlist_mtx);
rtnl_unlock();
if (WARN_ON(wiphy->software_iftypes & types))
return -EINVAL;
+ /* Only a single P2P_DEVICE can be allowed */
+ if (WARN_ON(types & BIT(NL80211_IFTYPE_P2P_DEVICE) &&
+ c->limits[j].max > 1))
+ return -EINVAL;
+
cnt += c->limits[j].max;
/*
* Don't advertise an unsupported type
dev_put(wdev->netdev);
}
+void cfg80211_unregister_wdev(struct wireless_dev *wdev)
+{
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+
+ ASSERT_RTNL();
+
+ if (WARN_ON(wdev->netdev))
+ return;
+
+ mutex_lock(&rdev->devlist_mtx);
+ list_del_rcu(&wdev->list);
+ rdev->devlist_generation++;
+
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_P2P_DEVICE:
+ if (!wdev->p2p_started)
+ break;
+ rdev->ops->stop_p2p_device(&rdev->wiphy, wdev);
+ wdev->p2p_started = false;
+ rdev->opencount--;
+ break;
+ default:
+ WARN_ON_ONCE(1);
+ break;
+ }
+ mutex_unlock(&rdev->devlist_mtx);
+}
+EXPORT_SYMBOL(cfg80211_unregister_wdev);
+
static struct device_type wiphy_type = {
.name = "wlan",
};
const u8 *buf, size_t len, bool no_cck,
bool dont_wait_for_ack, u64 *cookie)
{
- struct net_device *dev = wdev->netdev;
const struct ieee80211_mgmt *mgmt;
u16 stype;
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
case NL80211_IFTYPE_AP_VLAN:
- if (!ether_addr_equal(mgmt->bssid, dev->dev_addr))
+ if (!ether_addr_equal(mgmt->bssid, wdev_address(wdev)))
err = -EINVAL;
break;
case NL80211_IFTYPE_MESH_POINT:
* cfg80211 doesn't track the stations
*/
break;
+ case NL80211_IFTYPE_P2P_DEVICE:
+ /*
+ * fall through, P2P device only supports
+ * public action frames
+ */
default:
err = -EOPNOTSUPP;
break;
return err;
}
- if (!ether_addr_equal(mgmt->sa, dev->dev_addr))
+ if (!ether_addr_equal(mgmt->sa, wdev_address(wdev)))
return -EINVAL;
/* Transmit the Action frame as requested by user space */
if (nla_put_u32(msg, i, NL80211_CMD_REGISTER_BEACONS))
goto nla_put_failure;
}
+ CMD(start_p2p_device, START_P2P_DEVICE);
#ifdef CONFIG_NL80211_TESTMODE
CMD(testmode_cmd, TESTMODE);
if (dev &&
(nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
- nla_put_string(msg, NL80211_ATTR_IFNAME, dev->name) ||
- nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, dev->dev_addr)))
+ nla_put_string(msg, NL80211_ATTR_IFNAME, dev->name)))
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFTYPE, wdev->iftype) ||
nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev)) ||
+ nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, wdev_address(wdev)) ||
nla_put_u32(msg, NL80211_ATTR_GENERATION,
rdev->devlist_generation ^
(cfg80211_rdev_list_generation << 2)))
return PTR_ERR(wdev);
}
- if (type == NL80211_IFTYPE_MESH_POINT &&
- info->attrs[NL80211_ATTR_MESH_ID]) {
+ switch (type) {
+ case NL80211_IFTYPE_MESH_POINT:
+ if (!info->attrs[NL80211_ATTR_MESH_ID])
+ break;
wdev_lock(wdev);
BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN !=
IEEE80211_MAX_MESH_ID_LEN);
memcpy(wdev->ssid, nla_data(info->attrs[NL80211_ATTR_MESH_ID]),
wdev->mesh_id_up_len);
wdev_unlock(wdev);
+ break;
+ case NL80211_IFTYPE_P2P_DEVICE:
+ /*
+ * P2P Device doesn't have a netdev, so doesn't go
+ * through the netdev notifier and must be added here
+ */
+ mutex_init(&wdev->mtx);
+ INIT_LIST_HEAD(&wdev->event_list);
+ spin_lock_init(&wdev->event_lock);
+ INIT_LIST_HEAD(&wdev->mgmt_registrations);
+ spin_lock_init(&wdev->mgmt_registrations_lock);
+
+ mutex_lock(&rdev->devlist_mtx);
+ wdev->identifier = ++rdev->wdev_id;
+ list_add_rcu(&wdev->list, &rdev->wdev_list);
+ rdev->devlist_generation++;
+ mutex_unlock(&rdev->devlist_mtx);
+ break;
+ default:
+ break;
}
if (nl80211_send_iface(msg, info->snd_pid, info->snd_seq, 0,
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_P2P_GO:
+ case NL80211_IFTYPE_P2P_DEVICE:
break;
default:
return -EOPNOTSUPP;
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_P2P_GO:
+ case NL80211_IFTYPE_P2P_DEVICE:
break;
default:
return -EOPNOTSUPP;
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_P2P_GO:
+ case NL80211_IFTYPE_P2P_DEVICE:
break;
default:
return -EOPNOTSUPP;
return 0;
}
+static int nl80211_start_p2p_device(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct wireless_dev *wdev = info->user_ptr[1];
+ int err;
+
+ if (!rdev->ops->start_p2p_device)
+ return -EOPNOTSUPP;
+
+ if (wdev->iftype != NL80211_IFTYPE_P2P_DEVICE)
+ return -EOPNOTSUPP;
+
+ if (wdev->p2p_started)
+ return 0;
+
+ mutex_lock(&rdev->devlist_mtx);
+ err = cfg80211_can_add_interface(rdev, wdev->iftype);
+ mutex_unlock(&rdev->devlist_mtx);
+ if (err)
+ return err;
+
+ err = rdev->ops->start_p2p_device(&rdev->wiphy, wdev);
+ if (err)
+ return err;
+
+ wdev->p2p_started = true;
+ mutex_lock(&rdev->devlist_mtx);
+ rdev->opencount++;
+ mutex_unlock(&rdev->devlist_mtx);
+
+ return 0;
+}
+
+static int nl80211_stop_p2p_device(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct wireless_dev *wdev = info->user_ptr[1];
+
+ if (wdev->iftype != NL80211_IFTYPE_P2P_DEVICE)
+ return -EOPNOTSUPP;
+
+ if (!rdev->ops->stop_p2p_device)
+ return -EOPNOTSUPP;
+
+ if (!wdev->p2p_started)
+ return 0;
+
+ rdev->ops->stop_p2p_device(&rdev->wiphy, wdev);
+ wdev->p2p_started = false;
+
+ mutex_lock(&rdev->devlist_mtx);
+ rdev->opencount--;
+ mutex_unlock(&rdev->devlist_mtx);
+
+ if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) {
+ rdev->scan_req->aborted = true;
+ ___cfg80211_scan_done(rdev, true);
+ }
+
+ return 0;
+}
+
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
#define NL80211_FLAG_NEED_NETDEV_UP (NL80211_FLAG_NEED_NETDEV |\
NL80211_FLAG_CHECK_NETDEV_UP)
#define NL80211_FLAG_NEED_WDEV 0x10
-/* If a netdev is associated, it must be UP */
+/* If a netdev is associated, it must be UP, P2P must be started */
#define NL80211_FLAG_NEED_WDEV_UP (NL80211_FLAG_NEED_WDEV |\
NL80211_FLAG_CHECK_NETDEV_UP)
}
dev_hold(dev);
+ } else if (ops->internal_flags & NL80211_FLAG_CHECK_NETDEV_UP) {
+ if (!wdev->p2p_started) {
+ mutex_unlock(&cfg80211_mutex);
+ if (rtnl)
+ rtnl_unlock();
+ return -ENETDOWN;
+ }
}
cfg80211_lock_rdev(rdev);
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
},
-
+ {
+ .cmd = NL80211_CMD_START_P2P_DEVICE,
+ .doit = nl80211_start_p2p_device,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_WDEV |
+ NL80211_FLAG_NEED_RTNL,
+ },
+ {
+ .cmd = NL80211_CMD_STOP_P2P_DEVICE,
+ .doit = nl80211_stop_p2p_device,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_WDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
static struct genl_multicast_group nl80211_mlme_mcgrp = {
if (otype == NL80211_IFTYPE_AP_VLAN)
return -EOPNOTSUPP;
+ /* cannot change into P2P device type */
+ if (ntype == NL80211_IFTYPE_P2P_DEVICE)
+ return -EOPNOTSUPP;
+
if (!rdev->ops->change_virtual_intf ||
!(rdev->wiphy.interface_modes & (1 << ntype)))
return -EOPNOTSUPP;
case NUM_NL80211_IFTYPES:
/* not happening */
break;
+ case NL80211_IFTYPE_P2P_DEVICE:
+ WARN_ON(1);
+ break;
}
}
list_for_each_entry(wdev_iter, &rdev->wdev_list, list) {
if (wdev_iter == wdev)
continue;
- if (!netif_running(wdev_iter->netdev))
- continue;
+ if (wdev_iter->netdev) {
+ if (!netif_running(wdev_iter->netdev))
+ continue;
+ } else if (wdev_iter->iftype == NL80211_IFTYPE_P2P_DEVICE) {
+ if (!wdev_iter->p2p_started)
+ continue;
+ } else {
+ WARN_ON(1);
+ }
if (rdev->wiphy.software_iftypes & BIT(wdev_iter->iftype))
continue;
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff