#define IS_CYC_Z(card) ((card).num_chips == (unsigned int)-1)
#define Z_FPGA_CHECK(card) \
- ((readl(&((struct RUNTIME_9060 __iomem *) \
- ((card).ctl_addr))->init_ctrl) & (1<<17)) != 0)
+ ((readl(&(card).ctl_addr.p9060->init_ctrl) & (1<<17)) != 0)
-#define ISZLOADED(card) (((ZO_V1 == readl(&((struct RUNTIME_9060 __iomem *) \
- ((card).ctl_addr))->mail_box_0)) || \
- Z_FPGA_CHECK(card)) && \
+#define ISZLOADED(card) (((ZO_V1 == readl(&(card).ctl_addr.p9060->mail_box_0)) \
+ || Z_FPGA_CHECK(card)) && \
(ZFIRM_ID == readl(&((struct FIRM_ID __iomem *) \
((card).base_addr+ID_ADDRESS))->signature)))
zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
board_ctrl = &zfw_ctrl->board_ctrl;
- loc_doorbell = readl(&((struct RUNTIME_9060 __iomem *)
- (cinfo->ctl_addr))->loc_doorbell);
+ loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell);
if (loc_doorbell) {
*cmd = (char)(0xff & loc_doorbell);
*channel = readl(&board_ctrl->fwcmd_channel);
*param = (__u32) readl(&board_ctrl->fwcmd_param);
- cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->
- loc_doorbell, 0xffffffff);
+ cy_writel(&cinfo->ctl_addr.p9060->loc_doorbell, 0xffffffff);
return 1;
}
return 0;
board_ctrl = &zfw_ctrl->board_ctrl;
index = 0;
- pci_doorbell =
- &((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell;
+ pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell;
while ((readl(pci_doorbell) & 0xff) != 0) {
if (index++ == 1000)
return (int)(readl(pci_doorbell) & 0xff);
zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
board_ctrl = &zfw_ctrl->board_ctrl;
fw_ver = readl(&board_ctrl->fw_version);
- hw_ver = readl(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->
- mail_box_0);
+ hw_ver = readl(&cinfo->ctl_addr.p9060->mail_box_0);
while (cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) {
special_count = 0;
struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS;
if (!ISZLOADED(*cinfo)) {
- if (((ZE_V1 == readl(&((struct RUNTIME_9060 __iomem *)
- (cinfo->ctl_addr))->mail_box_0)) &&
+ if (((ZE_V1 == readl(&cinfo->ctl_addr.p9060->
+ mail_box_0)) &&
Z_FPGA_CHECK(*cinfo)) &&
(ZFIRM_HLT == readl(
&firm_id->signature))) {
if (!cinfo->intr_enabled) {
struct ZFW_CTRL __iomem *zfw_ctrl;
struct BOARD_CTRL __iomem *board_ctrl;
+ u16 intr;
zfw_ctrl = cinfo->base_addr +
(readl(&firm_id->zfwctrl_addr) &
board_ctrl = &zfw_ctrl->board_ctrl;
/* Enable interrupts on the PLX chip */
- cy_writew(cinfo->ctl_addr + 0x68,
- readw(cinfo->ctl_addr + 0x68) | 0x0900);
+ intr = readw(&cinfo->ctl_addr.p9060->
+ intr_ctrl_stat) | 0x0900;
+ cy_writew(&cinfo->ctl_addr.p9060->
+ intr_ctrl_stat, intr);
/* Enable interrupts on the FW */
retval = cyz_issue_cmd(cinfo, 0,
C_CM_IRQ_ENBL, 0L);
spin_lock_init(&cinfo->card_lock);
if (IS_CYC_Z(*cinfo)) { /* Cyclades-Z */
- mailbox = readl(&((struct RUNTIME_9060 __iomem *)
- cinfo->ctl_addr)->mail_box_0);
+ mailbox = readl(&cinfo->ctl_addr.p9060->mail_box_0);
nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8;
cinfo->intr_enabled = 0;
cinfo->nports = 0; /* Will be correctly set later, after
/* set cy_card */
cy_card[j].base_addr = cy_isa_address;
- cy_card[j].ctl_addr = NULL;
+ cy_card[j].ctl_addr.p9050 = NULL;
cy_card[j].irq = (int)cy_isa_irq;
cy_card[j].bus_index = 0;
cy_card[j].first_line = cy_next_channel;
}
/* Disable interrupts on the PLX before resetting it */
- cy_writew(addr0 + 0x68, readw(addr0 + 0x68) & ~0x0900);
+ cy_writew(&ctl_addr->intr_ctrl_stat,
+ readw(&ctl_addr->intr_ctrl_stat) & ~0x0900);
plx_init(pdev, irq, addr0);
/* set cy_card */
cy_card[card_no].base_addr = addr2;
- cy_card[card_no].ctl_addr = addr0;
+ cy_card[card_no].ctl_addr.p9050 = addr0;
cy_card[card_no].irq = irq;
cy_card[card_no].bus_index = 1;
cy_card[card_no].first_line = cy_next_channel;
plx_ver = readb(addr2 + CyPLX_VER) & 0x0f;
switch (plx_ver) {
case PLX_9050:
-
cy_writeb(addr0 + 0x4c, 0x43);
break;
case PLX_9060:
case PLX_9080:
default: /* Old boards, use PLX_9060 */
- plx_init(pdev, irq, addr0);
- cy_writew(addr0 + 0x68, readw(addr0 + 0x68) | 0x0900);
+ {
+ struct RUNTIME_9060 __iomem *ctl_addr = addr0;
+ plx_init(pdev, irq, ctl_addr);
+ cy_writew(&ctl_addr->intr_ctrl_stat,
+ readw(&ctl_addr->intr_ctrl_stat) | 0x0900);
break;
}
+ }
}
dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from "
/* non-Z with old PLX */
if (!IS_CYC_Z(*cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) ==
PLX_9050)
- cy_writeb(cinfo->ctl_addr + 0x4c, 0);
+ cy_writeb(cinfo->ctl_addr.p9050 + 0x4c, 0);
else
#ifndef CONFIG_CYZ_INTR
if (!IS_CYC_Z(*cinfo))
#endif
- cy_writew(cinfo->ctl_addr + 0x68,
- readw(cinfo->ctl_addr + 0x68) & ~0x0900);
+ cy_writew(&cinfo->ctl_addr.p9060->intr_ctrl_stat,
+ readw(&cinfo->ctl_addr.p9060->intr_ctrl_stat) &
+ ~0x0900);
iounmap(cinfo->base_addr);
- if (cinfo->ctl_addr)
- iounmap(cinfo->ctl_addr);
+ if (cinfo->ctl_addr.p9050)
+ iounmap(cinfo->ctl_addr.p9050);
if (cinfo->irq
#ifndef CONFIG_CYZ_INTR
&& !IS_CYC_Z(*cinfo)
/* clear interrupt */
cy_writeb(card->base_addr + Cy_ClrIntr, 0);
iounmap(card->base_addr);
- if (card->ctl_addr)
- iounmap(card->ctl_addr);
+ if (card->ctl_addr.p9050)
+ iounmap(card->ctl_addr.p9050);
if (card->irq
#ifndef CONFIG_CYZ_INTR
&& !IS_CYC_Z(*card)