ARM: dts: sun4i: Add new ba10-tvbox board
authorHans de Goede <hdegoede@redhat.com>
Mon, 30 Jun 2014 21:57:57 +0000 (23:57 +0200)
committerMaxime Ripard <maxime.ripard@free-electrons.com>
Tue, 1 Jul 2014 08:01:16 +0000 (10:01 +0200)
The ba10 tvbox is an A10 based android tvbox, with 512M RAM, 8G nand flash,
rtl8188ctv usb wifi 1 USB-A receptacle hooked up to an EHCI/OHCI controller,
1 USB-A receptacle hooked up to the OTG and 100Mbit ethernet using a
rtl8201 phy.

The PCB is labelled ba10 hence I've named the board ba10-tvbox. It is used
in noname allwinner A10 tv-boxes.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts [new file with mode: 0644]

index 796fea8741832a3dea2679496fe66d8bbd7a6e6a..c3ee9fba892b1a98ac874900cde071ab28c8f887 100644 (file)
@@ -360,6 +360,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
        stih416-b2020-revE.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
        sun4i-a10-a1000.dtb \
+       sun4i-a10-ba10-tvbox.dtb \
        sun4i-a10-cubieboard.dtb \
        sun4i-a10-mini-xplus.dtb \
        sun4i-a10-hackberry.dtb \
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
new file mode 100644 (file)
index 0000000..1763cc7
--- /dev/null
@@ -0,0 +1,110 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+       model = "BA10 tvbox";
+       compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
+
+       soc@01c00000 {
+               emac: ethernet@01c0b000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&emac_pins_a>;
+                       phy = <&phy1>;
+                       status = "okay";
+               };
+
+               mdio@01c0b080 {
+                       status = "okay";
+
+                       phy1: ethernet-phy@1 {
+                               reg = <1>;
+                       };
+               };
+
+               mmc0: mmc@01c0f000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+                       vmmc-supply = <&reg_vcc3v3>;
+                       bus-width = <4>;
+                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-inverted;
+                       status = "okay";
+               };
+
+               usbphy: phy@01c13400 {
+                       usb1_vbus-supply = <&reg_usb1_vbus>;
+                       usb2_vbus-supply = <&reg_usb2_vbus>;
+                       status = "okay";
+               };
+
+               ehci0: usb@01c14000 {
+                       status = "okay";
+               };
+
+               ohci0: usb@01c14400 {
+                       status = "okay";
+               };
+
+               ehci1: usb@01c1c000 {
+                       status = "okay";
+               };
+
+               ohci1: usb@01c1c400 {
+                       status = "okay";
+               };
+
+               pinctrl@01c20800 {
+                       usb2_vbus_pin_a: usb2_vbus_pin@0 {
+                               allwinner,pins = "PH12";
+                       };
+               };
+
+               ir0: ir@01c21800 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&ir0_pins_a>;
+                       status = "okay";
+               };
+
+               uart0: serial@01c28000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uart0_pins_a>;
+                       status = "okay";
+               };
+
+               i2c0: i2c@01c2ac00 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c0_pins_a>;
+                       status = "okay";
+
+                       axp209: pmic@34 {
+                               compatible = "x-powers,axp209";
+                               reg = <0x34>;
+                               interrupts = <0>;
+
+                               interrupt-controller;
+                               #interrupt-cells = <1>;
+                       };
+               };
+       };
+
+       reg_usb1_vbus: usb1-vbus {
+               status = "okay";
+       };
+
+       reg_usb2_vbus: usb2-vbus {
+               gpio = <&pio 7 12 0>;
+               status = "okay";
+       };
+};