net: mvneta: support suspend and resume
authorJane Li <jiel@marvell.com>
Thu, 16 Mar 2017 08:22:28 +0000 (16:22 +0800)
committerDavid S. Miller <davem@davemloft.net>
Thu, 16 Mar 2017 17:20:38 +0000 (10:20 -0700)
Add basic support for handling suspend and resume.

Signed-off-by: Jane Li <jiel@marvell.com>
Reviewed-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/marvell/mvneta.c

index 61dd4462411c03511d6121d75ca65dc36c7f688f..aebbc5399a0604f8322730dd61ab02dcbac7a813 100644 (file)
@@ -431,6 +431,7 @@ struct mvneta_port {
        /* Flags for special SoC configurations */
        bool neta_armada3700;
        u16 rx_offset_correction;
+       const struct mbus_dram_target_info *dram_target_info;
 };
 
 /* The mvneta_tx_desc and mvneta_rx_desc structures describe the
@@ -4118,7 +4119,6 @@ static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
 /* Device initialization routine */
 static int mvneta_probe(struct platform_device *pdev)
 {
-       const struct mbus_dram_target_info *dram_target_info;
        struct resource *res;
        struct device_node *dn = pdev->dev.of_node;
        struct device_node *phy_node;
@@ -4267,13 +4267,13 @@ static int mvneta_probe(struct platform_device *pdev)
 
        pp->tx_csum_limit = tx_csum_limit;
 
-       dram_target_info = mv_mbus_dram_info();
+       pp->dram_target_info = mv_mbus_dram_info();
        /* Armada3700 requires setting default configuration of Mbus
         * windows, however without using filled mbus_dram_target_info
         * structure.
         */
-       if (dram_target_info || pp->neta_armada3700)
-               mvneta_conf_mbus_windows(pp, dram_target_info);
+       if (pp->dram_target_info || pp->neta_armada3700)
+               mvneta_conf_mbus_windows(pp, pp->dram_target_info);
 
        pp->tx_ring_size = MVNETA_MAX_TXD;
        pp->rx_ring_size = MVNETA_MAX_RXD;
@@ -4405,6 +4405,58 @@ static int mvneta_remove(struct platform_device *pdev)
        return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int mvneta_suspend(struct device *device)
+{
+       struct net_device *dev = dev_get_drvdata(device);
+       struct mvneta_port *pp = netdev_priv(dev);
+
+       if (netif_running(dev))
+               mvneta_stop(dev);
+       netif_device_detach(dev);
+       clk_disable_unprepare(pp->clk_bus);
+       clk_disable_unprepare(pp->clk);
+       return 0;
+}
+
+static int mvneta_resume(struct device *device)
+{
+       struct platform_device *pdev = to_platform_device(device);
+       struct net_device *dev = dev_get_drvdata(device);
+       struct mvneta_port *pp = netdev_priv(dev);
+       int err;
+
+       clk_prepare_enable(pp->clk);
+       if (!IS_ERR(pp->clk_bus))
+               clk_prepare_enable(pp->clk_bus);
+       if (pp->dram_target_info || pp->neta_armada3700)
+               mvneta_conf_mbus_windows(pp, pp->dram_target_info);
+       if (pp->bm_priv) {
+               err = mvneta_bm_port_init(pdev, pp);
+               if (err < 0) {
+                       dev_info(&pdev->dev, "use SW buffer management\n");
+                       pp->bm_priv = NULL;
+               }
+       }
+       mvneta_defaults_set(pp);
+       err = mvneta_port_power_up(pp, pp->phy_interface);
+       if (err < 0) {
+               dev_err(device, "can't power up port\n");
+               return err;
+       }
+
+       if (pp->use_inband_status)
+               mvneta_fixed_link_update(pp, dev->phydev);
+
+       netif_device_attach(dev);
+       if (netif_running(dev))
+               mvneta_open(dev);
+       return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(mvneta_pm_ops, mvneta_suspend, mvneta_resume);
+
 static const struct of_device_id mvneta_match[] = {
        { .compatible = "marvell,armada-370-neta" },
        { .compatible = "marvell,armada-xp-neta" },
@@ -4419,6 +4471,7 @@ static struct platform_driver mvneta_driver = {
        .driver = {
                .name = MVNETA_DRIVER_NAME,
                .of_match_table = mvneta_match,
+               .pm = &mvneta_pm_ops,
        },
 };