ARM: dts: omap: update usb_otg_hs data
authorKishon Vijay Abraham I <kishon@ti.com>
Fri, 27 Sep 2013 06:23:29 +0000 (11:53 +0530)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Sat, 28 Sep 2013 00:36:58 +0000 (17:36 -0700)
Updated the usb_otg_hs dt data to include the *phy* and *phy-names*
binding in order for the driver to use the new generic PHY framework.
Also updated the Documentation to include the binding information.
The PHY binding information can be found at
Documentation/devicetree/bindings/phy/phy-bindings.txt

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Documentation/devicetree/bindings/usb/omap-usb.txt
Documentation/devicetree/bindings/usb/usb-phy.txt
arch/arm/boot/dts/omap3-beagle-xm.dts
arch/arm/boot/dts/omap3-evm.dts
arch/arm/boot/dts/omap3-overo.dtsi
arch/arm/boot/dts/omap4.dtsi
arch/arm/boot/dts/twl4030.dtsi

index 9088ab09e20028c99257244975600fa24f44c403..661cb06a9063bfb3988ece2abca2b453ad633b94 100644 (file)
@@ -19,6 +19,9 @@ OMAP MUSB GLUE
  - power : Should be "50". This signifies the controller can supply up to
    100mA when operating in host mode.
  - usb-phy : the phandle for the PHY device
+ - phys : the phandle for the PHY device (used by generic PHY framework)
+ - phy-names : the names of the PHY corresponding to the PHYs present in the
+   *phy* phandle.
 
 Optional properties:
  - ctrl-module : phandle of the control module this glue uses to write to
@@ -33,6 +36,8 @@ usb_otg_hs: usb_otg_hs@4a0ab000 {
        num-eps = <16>;
        ram-bits = <12>;
        ctrl-module = <&omap_control_usb>;
+       phys = <&usb2_phy>;
+       phy-names = "usb2-phy";
 };
 
 Board specific device node entry
index 61496f5cb095b39c149705e7f80c3fba379c434d..c0245c888982b9be44bad31e76664880e2449e2c 100644 (file)
@@ -5,6 +5,8 @@ OMAP USB2 PHY
 Required properties:
  - compatible: Should be "ti,omap-usb2"
  - reg : Address and length of the register set for the device.
+ - #phy-cells: determine the number of cells that should be given in the
+   phandle while referencing this phy.
 
 Optional properties:
  - ctrl-module : phandle of the control module used by PHY driver to power on
@@ -16,6 +18,7 @@ usb2phy@4a0ad080 {
        compatible = "ti,omap-usb2";
        reg = <0x4a0ad080 0x58>;
        ctrl-module = <&omap_control_usb>;
+       #phy-cells = <0>;
 };
 
 OMAP USB3 PHY
@@ -25,6 +28,8 @@ Required properties:
  - reg : Address and length of the register set for the device.
  - reg-names: The names of the register addresses corresponding to the registers
    filled in "reg".
+ - #phy-cells: determine the number of cells that should be given in the
+   phandle while referencing this phy.
 
 Optional properties:
  - ctrl-module : phandle of the control module used by PHY driver to power on
@@ -39,4 +44,5 @@ usb3phy@4a084400 {
              <0x4a084c00 0x40>;
        reg-names = "phy_rx", "phy_tx", "pll_ctrl";
        ctrl-module = <&omap_control_usb>;
+       #phy-cells = <0>;
 };
index 0c514dc8460c2423299848748278a452638e535c..84838469f0d663e8d1940e1cd86be5198b711840 100644 (file)
 &usb_otg_hs {
        interface-type = <0>;
        usb-phy = <&usb2_phy>;
+       phys = <&usb2_phy>;
+       phy-names = "usb2-phy";
        mode = <3>;
        power = <50>;
 };
index 7d4329d179c43e24cae9bfaddb4c5b1fbc626535..4134dd05c3a43835e56963aebb25a18347701588 100644 (file)
@@ -70,6 +70,8 @@
 &usb_otg_hs {
        interface-type = <0>;
        usb-phy = <&usb2_phy>;
+       phys = <&usb2_phy>;
+       phy-names = "usb2-phy";
        mode = <3>;
        power = <50>;
 };
index 8f1abec78275635535f9faf4cdd03c60d2daf909..a461d2fd1fb0e81862805ccec939e1c1b3a41244 100644 (file)
@@ -76,6 +76,8 @@
 &usb_otg_hs {
        interface-type = <0>;
        usb-phy = <&usb2_phy>;
+       phys = <&usb2_phy>;
+       phy-names = "usb2-phy";
        mode = <3>;
        power = <50>;
 };
index 22d9f2b593d461eb5bde36a35f24e2eaea40e298..1e8e2fe71de99e0b2b71149a099fc74553a1fb6a 100644 (file)
                                compatible = "ti,omap-usb2";
                                reg = <0x4a0ad080 0x58>;
                                ctrl-module = <&omap_control_usb>;
+                               #phy-cells = <0>;
                        };
                };
 
                        interrupt-names = "mc", "dma";
                        ti,hwmods = "usb_otg_hs";
                        usb-phy = <&usb2_phy>;
+                       phys = <&usb2_phy>;
+                       phy-names = "usb2-phy";
                        multipoint = <1>;
                        num-eps = <16>;
                        ram-bits = <12>;
index ae6a17aed9ee224c85498b2bc6b1e0fa43e75e56..5aba238d1f1ec5322eb817e0eb606dffdd763b65 100644 (file)
@@ -86,6 +86,7 @@
                usb1v8-supply = <&vusb1v8>;
                usb3v1-supply = <&vusb3v1>;
                usb_mode = <1>;
+               #phy-cells = <0>;
        };
 
        twl_pwm: pwm {