[ARM] Kirkwood: enable gpio leds/buttons for the mv88f6281gtw_ge board

Signed-off-by: Siddarth Gore <gores@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 4fb03f4d3f4af4c25ff57642f6e652b1b7285600..0358f45766cbe565c7571483bb251fc490f9f81f 100644 (file)
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -17,6 +17,10 @@
 #include <linux/timer.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/orion_spi.h>
@@ -26,6 +30,7 @@
 #include <asm/mach/pci.h>
 #include <mach/kirkwood.h>
 #include "common.h"
+#include "mpp.h"
 
 static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
        .phy_addr       = MV643XX_ETH_PHY_NONE,
@@ -62,12 +67,79 @@ static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
        },
 };
 
+static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
+       {
+               .code           = KEY_RESTART,
+               .gpio           = 47,
+               .desc           = "SWR Button",
+               .active_low     = 1,
+       }, {
+               .code           = KEY_F1,
+               .gpio           = 46,
+               .desc           = "WPS Button(F1)",
+               .active_low     = 1,
+       },
+};
+
+static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
+       .buttons        = mv88f6281gtw_ge_button_pins,
+       .nbuttons       = ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_buttons = {
+       .name           = "gpio-keys",
+       .id             = -1,
+       .num_resources  = 0,
+       .dev            = {
+               .platform_data  = &mv88f6281gtw_ge_button_data,
+       },
+};
+
+static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
+       {
+               .name           = "gtw:green:Status",
+               .gpio           = 20,
+               .active_low     = 0,
+       }, {
+               .name           = "gtw:red:Status",
+               .gpio           = 21,
+               .active_low     = 0,
+       }, {
+               .name           = "gtw:green:USB",
+               .gpio           = 12,
+               .active_low     = 0,
+       },
+};
+
+static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
+       .leds           = mv88f6281gtw_ge_led_pins,
+       .num_leds       = ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_leds = {
+       .name   = "leds-gpio",
+       .id     = -1,
+       .dev    = {
+               .platform_data  = &mv88f6281gtw_ge_led_data,
+       },
+};
+
+static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
+       MPP12_GPO,      /* Status#_USB pin  */
+       MPP20_GPIO,     /* Status#_GLED pin */
+       MPP21_GPIO,     /* Status#_RLED pin */
+       MPP46_GPIO,     /* WPS_Switch pin   */
+       MPP47_GPIO,     /* SW_Init pin      */
+       0
+};
+
 static void __init mv88f6281gtw_ge_init(void)
 {
        /*
         * Basic setup. Needs to be called early.
         */
        kirkwood_init();
+       kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
 
        kirkwood_ehci_init();
        kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
@@ -76,6 +148,8 @@ static void __init mv88f6281gtw_ge_init(void)
                                ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
        kirkwood_spi_init();
        kirkwood_uart0_init();
+       platform_device_register(&mv88f6281gtw_ge_leds);
+       platform_device_register(&mv88f6281gtw_ge_buttons);
 }
 
 static int __init mv88f6281gtw_ge_pci_init(void)