ARM: dts: armada-38x: use usb-nop-xceiv PHY for the xhci nodes on Armada 388 GP

Using the usb-nop-xceiv PHY for the xhci nodes allows a better
representation of the hardware but also a better handling of the
regulator. By linking the regulator to the PHY there is no more need to
use the regulator-always-on property, then it allows a better power
management.

The remaining usb node uses the ehci-orion driver which can't be used
with the usb-nop-xceiv PHY and must keeps the direct link to the
regulator with the regulator-always-on property.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index ac3c9445ce57510a968bb38f9e60eebde70fa652..51943598d8585609c5c06a068b7077271ccba45a 100644 (file)
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -229,13 +229,13 @@
 
                        /* CON5 */
                        usb3@f0000 {
-                               vcc-supply = <&reg_usb2_1_vbus>;
+                               usb-phy = <&usb2_1_phy>;
                                status = "okay";
                        };
 
                        /* CON7 */
                        usb3@f8000 {
-                               vcc-supply = <&reg_usb3_vbus>;
+                               usb-phy = <&usb3_phy>;
                                status = "okay";
                        };
                };
@@ -273,13 +273,22 @@
                };
        };
 
+       usb2_1_phy: usb2_1_phy {
+               compatible = "usb-nop-xceiv";
+               vcc-supply = <&reg_usb2_1_vbus>;
+       };
+
+       usb3_phy: usb3_phy {
+               compatible = "usb-nop-xceiv";
+               vcc-supply = <&reg_usb3_vbus>;
+       };
+
        reg_usb3_vbus: usb3-vbus {
                compatible = "regulator-fixed";
                regulator-name = "usb3-vbus";
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
                enable-active-high;
-               regulator-always-on;
                gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
        };
 
@@ -299,7 +308,6 @@
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
                enable-active-high;
-               regulator-always-on;
                gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
        };