USB: musb uses endpoint functions
authorJulia Lawall <julia@diku.dk>
Sun, 25 Jan 2009 01:57:24 +0000 (17:57 -0800)
committerGreg Kroah-Hartman <gregkh@kvm.kroah.org>
Wed, 28 Jan 2009 00:15:34 +0000 (16:15 -0800)
This set of patches introduces calls to the following set of functions:

usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)

In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:

USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC

An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)

@r5@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
-  \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)

@inc@
@@

#include <linux/usb.h>

@depends on !inc && (r1||r5)@
@@

+ #include <linux/usb.h>
  #include <linux/usb/...>
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/musb/musb_gadget.c
drivers/usb/musb/musb_host.c

index 6197daeab8f9e9cc9e09e4e4a31cc46ae4430e5e..4ea305387981655db2aca1858fe4c5fe6b9011a2 100644 (file)
@@ -874,10 +874,10 @@ static int musb_gadget_enable(struct usb_ep *ep,
                status = -EBUSY;
                goto fail;
        }
-       musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+       musb_ep->type = usb_endpoint_type(desc);
 
        /* check direction and (later) maxpacket size against endpoint */
-       if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum)
+       if (usb_endpoint_num(desc) != epnum)
                goto fail;
 
        /* REVISIT this rules out high bandwidth periodic transfers */
@@ -890,7 +890,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
         * packet size (or fail), set the mode, clear the fifo
         */
        musb_ep_select(mbase, epnum);
-       if (desc->bEndpointAddress & USB_DIR_IN) {
+       if (usb_endpoint_dir_in(desc)) {
                u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
 
                if (hw_ep->is_shared_fifo)
index 99fa612348769a1134228bfd09a85ad69250285d..a035ceccf95019c09082139be0727bf395a7a311 100644 (file)
@@ -1847,8 +1847,8 @@ static int musb_urb_enqueue(
                goto done;
        }
 
-       qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-       qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+       qh->epnum = usb_endpoint_num(epd);
+       qh->type = usb_endpoint_type(epd);
 
        /* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
        qh->addr_reg = (u8) usb_pipedevice(urb->pipe);