drm/rockchip: dw-mipi-dsi: allow commands in panel_disable
authorJohn Keeping <john@metanate.com>
Fri, 24 Feb 2017 12:54:55 +0000 (12:54 +0000)
committerSean Paul <seanpaul@chromium.org>
Wed, 1 Mar 2017 19:48:54 +0000 (14:48 -0500)
Panel drivers may want to sent commands during the disable function, for
example MIPI_DCS_SET_DISPLAY_OFF before the video signal ends.  In order
to send commands we need to write to registers, so pclk must be enabled.

While changing this, remove the unnecessary code after the panel
unprepare call which seems to be a workaround for a specific panel and
thus belongs in the panel driver.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-13-john@metanate.com
drivers/gpu/drm/rockchip/dw-mipi-dsi.c

index 53515404d0ca24ba7b67faefbc96bfd75ada3737..4201a214329590ea3e5b677542e59e56ab74edde 100644 (file)
@@ -848,24 +848,16 @@ static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
 {
        struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
 
-       drm_panel_disable(dsi->panel);
-
        if (clk_prepare_enable(dsi->pclk)) {
                dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
                return;
        }
 
+       drm_panel_disable(dsi->panel);
+
        dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
        drm_panel_unprepare(dsi->panel);
-       dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
 
-       /*
-        * This is necessary to make sure the peripheral will be driven
-        * normally when the display is enabled again later.
-        */
-       msleep(120);
-
-       dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
        dw_mipi_dsi_disable(dsi);
        clk_disable_unprepare(dsi->pclk);
 }