+++ /dev/null
-/*
- * Freescale MPC83XX / MPC85XX DMA Controller
- *
- * Copyright (c) 2009 Ira W. Snyder <iws@ovro.caltech.edu>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ARCH_POWERPC_ASM_FSLDMA_H__
-#define __ARCH_POWERPC_ASM_FSLDMA_H__
-
-#include <linux/slab.h>
-#include <linux/dmaengine.h>
-
-/*
- * Definitions for the Freescale DMA controller's DMA_SLAVE implemention
- *
- * The Freescale DMA_SLAVE implementation was designed to handle many-to-many
- * transfers. An example usage would be an accelerated copy between two
- * scatterlists. Another example use would be an accelerated copy from
- * multiple non-contiguous device buffers into a single scatterlist.
- *
- * A DMA_SLAVE transaction is defined by a struct fsl_dma_slave. This
- * structure contains a list of hardware addresses that should be copied
- * to/from the scatterlist passed into device_prep_slave_sg(). The structure
- * also has some fields to enable hardware-specific features.
- */
-
-/**
- * struct fsl_dma_hw_addr
- * @entry: linked list entry
- * @address: the hardware address
- * @length: length to transfer
- *
- * Holds a single physical hardware address / length pair for use
- * with the DMAEngine DMA_SLAVE API.
- */
-struct fsl_dma_hw_addr {
- struct list_head entry;
-
- dma_addr_t address;
- size_t length;
-};
-
-/**
- * struct fsl_dma_slave
- * @addresses: a linked list of struct fsl_dma_hw_addr structures
- * @request_count: value for DMA request count
- * @src_loop_size: setup and enable constant source-address DMA transfers
- * @dst_loop_size: setup and enable constant destination address DMA transfers
- * @external_start: enable externally started DMA transfers
- * @external_pause: enable externally paused DMA transfers
- *
- * Holds a list of address / length pairs for use with the DMAEngine
- * DMA_SLAVE API implementation for the Freescale DMA controller.
- */
-struct fsl_dma_slave {
-
- /* List of hardware address/length pairs */
- struct list_head addresses;
-
- /* Support for extra controller features */
- unsigned int request_count;
- unsigned int src_loop_size;
- unsigned int dst_loop_size;
- bool external_start;
- bool external_pause;
-};
-
-/**
- * fsl_dma_slave_append - add an address/length pair to a struct fsl_dma_slave
- * @slave: the &struct fsl_dma_slave to add to
- * @address: the hardware address to add
- * @length: the length of bytes to transfer from @address
- *
- * Add a hardware address/length pair to a struct fsl_dma_slave. Returns 0 on
- * success, -ERRNO otherwise.
- */
-static inline int fsl_dma_slave_append(struct fsl_dma_slave *slave,
- dma_addr_t address, size_t length)
-{
- struct fsl_dma_hw_addr *addr;
-
- addr = kzalloc(sizeof(*addr), GFP_ATOMIC);
- if (!addr)
- return -ENOMEM;
-
- INIT_LIST_HEAD(&addr->entry);
- addr->address = address;
- addr->length = length;
-
- list_add_tail(&addr->entry, &slave->addresses);
- return 0;
-}
-
-/**
- * fsl_dma_slave_free - free a struct fsl_dma_slave
- * @slave: the struct fsl_dma_slave to free
- *
- * Free a struct fsl_dma_slave and all associated address/length pairs
- */
-static inline void fsl_dma_slave_free(struct fsl_dma_slave *slave)
-{
- struct fsl_dma_hw_addr *addr, *tmp;
-
- if (slave) {
- list_for_each_entry_safe(addr, tmp, &slave->addresses, entry) {
- list_del(&addr->entry);
- kfree(addr);
- }
-
- kfree(slave);
- }
-}
-
-/**
- * fsl_dma_slave_alloc - allocate a struct fsl_dma_slave
- * @gfp: the flags to pass to kmalloc when allocating this structure
- *
- * Allocate a struct fsl_dma_slave for use by the DMA_SLAVE API. Returns a new
- * struct fsl_dma_slave on success, or NULL on failure.
- */
-static inline struct fsl_dma_slave *fsl_dma_slave_alloc(gfp_t gfp)
-{
- struct fsl_dma_slave *slave;
-
- slave = kzalloc(sizeof(*slave), gfp);
- if (!slave)
- return NULL;
-
- INIT_LIST_HEAD(&slave->addresses);
- return slave;
-}
-
-#endif /* __ARCH_POWERPC_ASM_FSLDMA_H__ */
#include <linux/dmapool.h>
#include <linux/of_platform.h>
-#include <asm/fsldma.h>
#include "fsldma.h"
static const char msg_ld_oom[] = "No free memory for link descriptor\n";
struct dma_chan *dchan, struct scatterlist *sgl, unsigned int sg_len,
enum dma_data_direction direction, unsigned long flags)
{
- struct fsldma_chan *chan;
- struct fsl_desc_sw *first = NULL, *prev = NULL, *new = NULL;
- struct fsl_dma_slave *slave;
- size_t copy;
-
- int i;
- struct scatterlist *sg;
- size_t sg_used;
- size_t hw_used;
- struct fsl_dma_hw_addr *hw;
- dma_addr_t dma_dst, dma_src;
-
- if (!dchan)
- return NULL;
-
- if (!dchan->private)
- return NULL;
-
- chan = to_fsl_chan(dchan);
- slave = dchan->private;
-
- if (list_empty(&slave->addresses))
- return NULL;
-
- hw = list_first_entry(&slave->addresses, struct fsl_dma_hw_addr, entry);
- hw_used = 0;
-
/*
- * Build the hardware transaction to copy from the scatterlist to
- * the hardware, or from the hardware to the scatterlist
+ * This operation is not supported on the Freescale DMA controller
*
- * If you are copying from the hardware to the scatterlist and it
- * takes two hardware entries to fill an entire page, then both
- * hardware entries will be coalesced into the same page
- *
- * If you are copying from the scatterlist to the hardware and a
- * single page can fill two hardware entries, then the data will
- * be read out of the page into the first hardware entry, and so on
+ * However, we need to provide the function pointer to allow the
+ * device_control() method to work.
*/
- for_each_sg(sgl, sg, sg_len, i) {
- sg_used = 0;
-
- /* Loop until the entire scatterlist entry is used */
- while (sg_used < sg_dma_len(sg)) {
-
- /*
- * If we've used up the current hardware address/length
- * pair, we need to load a new one
- *
- * This is done in a while loop so that descriptors with
- * length == 0 will be skipped
- */
- while (hw_used >= hw->length) {
-
- /*
- * If the current hardware entry is the last
- * entry in the list, we're finished
- */
- if (list_is_last(&hw->entry, &slave->addresses))
- goto finished;
-
- /* Get the next hardware address/length pair */
- hw = list_entry(hw->entry.next,
- struct fsl_dma_hw_addr, entry);
- hw_used = 0;
- }
-
- /* Allocate the link descriptor from DMA pool */
- new = fsl_dma_alloc_descriptor(chan);
- if (!new) {
- dev_err(chan->dev, "No free memory for "
- "link descriptor\n");
- goto fail;
- }
-#ifdef FSL_DMA_LD_DEBUG
- dev_dbg(chan->dev, "new link desc alloc %p\n", new);
-#endif
-
- /*
- * Calculate the maximum number of bytes to transfer,
- * making sure it is less than the DMA controller limit
- */
- copy = min_t(size_t, sg_dma_len(sg) - sg_used,
- hw->length - hw_used);
- copy = min_t(size_t, copy, FSL_DMA_BCR_MAX_CNT);
-
- /*
- * DMA_FROM_DEVICE
- * from the hardware to the scatterlist
- *
- * DMA_TO_DEVICE
- * from the scatterlist to the hardware
- */
- if (direction == DMA_FROM_DEVICE) {
- dma_src = hw->address + hw_used;
- dma_dst = sg_dma_address(sg) + sg_used;
- } else {
- dma_src = sg_dma_address(sg) + sg_used;
- dma_dst = hw->address + hw_used;
- }
-
- /* Fill in the descriptor */
- set_desc_cnt(chan, &new->hw, copy);
- set_desc_src(chan, &new->hw, dma_src);
- set_desc_dst(chan, &new->hw, dma_dst);
-
- /*
- * If this is not the first descriptor, chain the
- * current descriptor after the previous descriptor
- */
- if (!first) {
- first = new;
- } else {
- set_desc_next(chan, &prev->hw,
- new->async_tx.phys);
- }
-
- new->async_tx.cookie = 0;
- async_tx_ack(&new->async_tx);
-
- prev = new;
- sg_used += copy;
- hw_used += copy;
-
- /* Insert the link descriptor into the LD ring */
- list_add_tail(&new->node, &first->tx_list);
- }
- }
-
-finished:
-
- /* All of the hardware address/length pairs had length == 0 */
- if (!first || !new)
- return NULL;
-
- new->async_tx.flags = flags;
- new->async_tx.cookie = -EBUSY;
-
- /* Set End-of-link to the last link descriptor of new list */
- set_ld_eol(chan, new);
-
- /* Enable extra controller features */
- if (chan->set_src_loop_size)
- chan->set_src_loop_size(chan, slave->src_loop_size);
-
- if (chan->set_dst_loop_size)
- chan->set_dst_loop_size(chan, slave->dst_loop_size);
-
- if (chan->toggle_ext_start)
- chan->toggle_ext_start(chan, slave->external_start);
-
- if (chan->toggle_ext_pause)
- chan->toggle_ext_pause(chan, slave->external_pause);
-
- if (chan->set_request_count)
- chan->set_request_count(chan, slave->request_count);
-
- return &first->async_tx;
-
-fail:
- /* If first was not set, then we failed to allocate the very first
- * descriptor, and we're done */
- if (!first)
- return NULL;
-
- /*
- * First is set, so all of the descriptors we allocated have been added
- * to first->tx_list, INCLUDING "first" itself. Therefore we
- * must traverse the list backwards freeing each descriptor in turn
- *
- * We're re-using variables for the loop, oh well
- */
- fsldma_free_desc_list_reverse(chan, &first->tx_list);
return NULL;
}
static int fsl_dma_device_control(struct dma_chan *dchan,
enum dma_ctrl_cmd cmd, unsigned long arg)
{
+ struct dma_slave_config *config;
struct fsldma_chan *chan;
unsigned long flags;
-
- /* Only supports DMA_TERMINATE_ALL */
- if (cmd != DMA_TERMINATE_ALL)
- return -ENXIO;
+ int size;
if (!dchan)
return -EINVAL;
chan = to_fsl_chan(dchan);
- /* Halt the DMA engine */
- dma_halt(chan);
+ switch (cmd) {
+ case DMA_TERMINATE_ALL:
+ /* Halt the DMA engine */
+ dma_halt(chan);
- spin_lock_irqsave(&chan->desc_lock, flags);
+ spin_lock_irqsave(&chan->desc_lock, flags);
- /* Remove and free all of the descriptors in the LD queue */
- fsldma_free_desc_list(chan, &chan->ld_pending);
- fsldma_free_desc_list(chan, &chan->ld_running);
+ /* Remove and free all of the descriptors in the LD queue */
+ fsldma_free_desc_list(chan, &chan->ld_pending);
+ fsldma_free_desc_list(chan, &chan->ld_running);
- spin_unlock_irqrestore(&chan->desc_lock, flags);
+ spin_unlock_irqrestore(&chan->desc_lock, flags);
+ return 0;
+
+ case DMA_SLAVE_CONFIG:
+ config = (struct dma_slave_config *)arg;
+
+ /* make sure the channel supports setting burst size */
+ if (!chan->set_request_count)
+ return -ENXIO;
+
+ /* we set the controller burst size depending on direction */
+ if (config->direction == DMA_TO_DEVICE)
+ size = config->dst_addr_width * config->dst_maxburst;
+ else
+ size = config->src_addr_width * config->src_maxburst;
+
+ chan->set_request_count(chan, size);
+ return 0;
+
+ case FSLDMA_EXTERNAL_START:
+
+ /* make sure the channel supports external start */
+ if (!chan->toggle_ext_start)
+ return -ENXIO;
+
+ chan->toggle_ext_start(chan, arg);
+ return 0;
+
+ default:
+ return -ENXIO;
+ }
return 0;
}
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff