#include <linux/bitops.h>
#include <linux/log2.h>
#include <linux/typecheck.h>
+#include <linux/printk.h>
#include <linux/dynamic_debug.h>
#include <asm/byteorder.h>
#include <asm/bug.h>
-extern const char linux_banner[];
-extern const char linux_proc_banner[];
-
#define USHRT_MAX ((u16)(~0U))
#define SHRT_MAX ((s16)(USHRT_MAX>>1))
#define SHRT_MIN ((s16)(-SHRT_MAX - 1))
*/
#define lower_32_bits(n) ((u32)(n))
-#define KERN_EMERG "<0>" /* system is unusable */
-#define KERN_ALERT "<1>" /* action must be taken immediately */
-#define KERN_CRIT "<2>" /* critical conditions */
-#define KERN_ERR "<3>" /* error conditions */
-#define KERN_WARNING "<4>" /* warning conditions */
-#define KERN_NOTICE "<5>" /* normal but significant condition */
-#define KERN_INFO "<6>" /* informational */
-#define KERN_DEBUG "<7>" /* debug-level messages */
-
-/* Use the default kernel loglevel */
-#define KERN_DEFAULT "<d>"
-/*
- * Annotation for a "continued" line of log printout (only done after a
- * line that had no enclosing \n). Only to be used by core/arch code
- * during early bootup (a continued line is not SMP-safe otherwise).
- */
-#define KERN_CONT "<c>"
-
-extern int console_printk[];
-
-#define console_loglevel (console_printk[0])
-#define default_message_loglevel (console_printk[1])
-#define minimum_console_loglevel (console_printk[2])
-#define default_console_loglevel (console_printk[3])
-
struct completion;
struct pt_regs;
struct user;
}
#endif
-struct va_format {
- const char *fmt;
- va_list *va;
-};
-
extern struct atomic_notifier_head panic_notifier_list;
extern long (*panic_blink)(int state);
NORET_TYPE void panic(const char * fmt, ...)
struct pid;
extern struct pid *session_of_pgrp(struct pid *pgrp);
-/*
- * FW_BUG
- * Add this to a message where you are sure the firmware is buggy or behaves
- * really stupid or out of spec. Be aware that the responsible BIOS developer
- * should be able to fix this issue or at least get a concrete idea of the
- * problem by reading your message without the need of looking at the kernel
- * code.
- *
- * Use it for definite and high priority BIOS bugs.
- *
- * FW_WARN
- * Use it for not that clear (e.g. could the kernel messed up things already?)
- * and medium priority BIOS bugs.
- *
- * FW_INFO
- * Use this one if you want to tell the user or vendor about something
- * suspicious, but generally harmless related to the firmware.
- *
- * Use it for information or very low priority BIOS bugs.
- */
-#define FW_BUG "[Firmware Bug]: "
-#define FW_WARN "[Firmware Warn]: "
-#define FW_INFO "[Firmware Info]: "
-
-/*
- * HW_ERR
- * Add this to a message for hardware errors, so that user can report
- * it to hardware vendor instead of LKML or software vendor.
- */
-#define HW_ERR "[Hardware Error]: "
-
-#ifdef CONFIG_PRINTK
-asmlinkage int vprintk(const char *fmt, va_list args)
- __attribute__ ((format (printf, 1, 0)));
-asmlinkage int printk(const char * fmt, ...)
- __attribute__ ((format (printf, 1, 2))) __cold;
-
-/*
- * Please don't use printk_ratelimit(), because it shares ratelimiting state
- * with all other unrelated printk_ratelimit() callsites. Instead use
- * printk_ratelimited() or plain old __ratelimit().
- */
-extern int __printk_ratelimit(const char *func);
-#define printk_ratelimit() __printk_ratelimit(__func__)
-extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
- unsigned int interval_msec);
-
-extern int printk_delay_msec;
-extern int dmesg_restrict;
-
-/*
- * Print a one-time message (analogous to WARN_ONCE() et al):
- */
-#define printk_once(x...) ({ \
- static bool __print_once; \
- \
- if (!__print_once) { \
- __print_once = true; \
- printk(x); \
- } \
-})
-
-void log_buf_kexec_setup(void);
-#else
-static inline int vprintk(const char *s, va_list args)
- __attribute__ ((format (printf, 1, 0)));
-static inline int vprintk(const char *s, va_list args) { return 0; }
-static inline int printk(const char *s, ...)
- __attribute__ ((format (printf, 1, 2)));
-static inline int __cold printk(const char *s, ...) { return 0; }
-static inline int printk_ratelimit(void) { return 0; }
-static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
- unsigned int interval_msec) \
- { return false; }
-
-/* No effect, but we still get type checking even in the !PRINTK case: */
-#define printk_once(x...) printk(x)
-
-static inline void log_buf_kexec_setup(void)
-{
-}
-#endif
-
-/*
- * Dummy printk for disabled debugging statements to use whilst maintaining
- * gcc's format and side-effect checking.
- */
-static inline __attribute__ ((format (printf, 1, 2)))
-int no_printk(const char *s, ...) { return 0; }
-
-extern int printk_needs_cpu(int cpu);
-extern void printk_tick(void);
-
-extern void asmlinkage __attribute__((format(printf, 1, 2)))
- early_printk(const char *fmt, ...);
-
unsigned long int_sqrt(unsigned long);
-static inline void console_silent(void)
-{
- console_loglevel = 0;
-}
-
-static inline void console_verbose(void)
-{
- if (console_loglevel)
- console_loglevel = 15;
-}
-
extern void bust_spinlocks(int yes);
extern void wake_up_klogd(void);
extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */
#define TAINT_CRAP 10
#define TAINT_FIRMWARE_WORKAROUND 11
-extern void dump_stack(void) __cold;
-
-enum {
- DUMP_PREFIX_NONE,
- DUMP_PREFIX_ADDRESS,
- DUMP_PREFIX_OFFSET
-};
-extern void hex_dump_to_buffer(const void *buf, size_t len,
- int rowsize, int groupsize,
- char *linebuf, size_t linebuflen, bool ascii);
-extern void print_hex_dump(const char *level, const char *prefix_str,
- int prefix_type, int rowsize, int groupsize,
- const void *buf, size_t len, bool ascii);
-extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
- const void *buf, size_t len);
-
extern const char hex_asc[];
#define hex_asc_lo(x) hex_asc[((x) & 0x0f)]
#define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4]
extern int hex_to_bin(char ch);
-#ifndef pr_fmt
-#define pr_fmt(fmt) fmt
-#endif
-
-#define pr_emerg(fmt, ...) \
- printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert(fmt, ...) \
- printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit(fmt, ...) \
- printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err(fmt, ...) \
- printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warning(fmt, ...) \
- printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warn pr_warning
-#define pr_notice(fmt, ...) \
- printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info(fmt, ...) \
- printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_cont(fmt, ...) \
- printk(KERN_CONT fmt, ##__VA_ARGS__)
-
-/* pr_devel() should produce zero code unless DEBUG is defined */
-#ifdef DEBUG
-#define pr_devel(fmt, ...) \
- printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_devel(fmt, ...) \
- ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
-#endif
-
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug(fmt, ...) \
- printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#elif defined(CONFIG_DYNAMIC_DEBUG)
-/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
-#define pr_debug(fmt, ...) \
- dynamic_pr_debug(fmt, ##__VA_ARGS__)
-#else
-#define pr_debug(fmt, ...) \
- ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
-#endif
-
-/*
- * ratelimited messages with local ratelimit_state,
- * no local ratelimit_state used in the !PRINTK case
- */
-#ifdef CONFIG_PRINTK
-#define printk_ratelimited(fmt, ...) ({ \
- static DEFINE_RATELIMIT_STATE(_rs, \
- DEFAULT_RATELIMIT_INTERVAL, \
- DEFAULT_RATELIMIT_BURST); \
- \
- if (__ratelimit(&_rs)) \
- printk(fmt, ##__VA_ARGS__); \
-})
-#else
-/* No effect, but we still get type checking even in the !PRINTK case: */
-#define printk_ratelimited printk
-#endif
-
-#define pr_emerg_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warning_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warn_ratelimited pr_warning_ratelimited
-#define pr_notice_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-/* no pr_cont_ratelimited, don't do that... */
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug_ratelimited(fmt, ...) \
- printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_debug_ratelimited(fmt, ...) \
- ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
- ##__VA_ARGS__); 0; })
-#endif
-
/*
* General tracing related utility functions - trace_printk(),
* tracing_on/tracing_off and tracing_start()/tracing_stop
--- /dev/null
+#ifndef __KERNEL_PRINTK__
+#define __KERNEL_PRINTK__
+
+extern const char linux_banner[];
+extern const char linux_proc_banner[];
+
+#define KERN_EMERG "<0>" /* system is unusable */
+#define KERN_ALERT "<1>" /* action must be taken immediately */
+#define KERN_CRIT "<2>" /* critical conditions */
+#define KERN_ERR "<3>" /* error conditions */
+#define KERN_WARNING "<4>" /* warning conditions */
+#define KERN_NOTICE "<5>" /* normal but significant condition */
+#define KERN_INFO "<6>" /* informational */
+#define KERN_DEBUG "<7>" /* debug-level messages */
+
+/* Use the default kernel loglevel */
+#define KERN_DEFAULT "<d>"
+/*
+ * Annotation for a "continued" line of log printout (only done after a
+ * line that had no enclosing \n). Only to be used by core/arch code
+ * during early bootup (a continued line is not SMP-safe otherwise).
+ */
+#define KERN_CONT "<c>"
+
+extern int console_printk[];
+
+#define console_loglevel (console_printk[0])
+#define default_message_loglevel (console_printk[1])
+#define minimum_console_loglevel (console_printk[2])
+#define default_console_loglevel (console_printk[3])
+
+struct va_format {
+ const char *fmt;
+ va_list *va;
+};
+
+/*
+ * FW_BUG
+ * Add this to a message where you are sure the firmware is buggy or behaves
+ * really stupid or out of spec. Be aware that the responsible BIOS developer
+ * should be able to fix this issue or at least get a concrete idea of the
+ * problem by reading your message without the need of looking at the kernel
+ * code.
+ *
+ * Use it for definite and high priority BIOS bugs.
+ *
+ * FW_WARN
+ * Use it for not that clear (e.g. could the kernel messed up things already?)
+ * and medium priority BIOS bugs.
+ *
+ * FW_INFO
+ * Use this one if you want to tell the user or vendor about something
+ * suspicious, but generally harmless related to the firmware.
+ *
+ * Use it for information or very low priority BIOS bugs.
+ */
+#define FW_BUG "[Firmware Bug]: "
+#define FW_WARN "[Firmware Warn]: "
+#define FW_INFO "[Firmware Info]: "
+
+/*
+ * HW_ERR
+ * Add this to a message for hardware errors, so that user can report
+ * it to hardware vendor instead of LKML or software vendor.
+ */
+#define HW_ERR "[Hardware Error]: "
+
+#ifdef CONFIG_PRINTK
+asmlinkage int vprintk(const char *fmt, va_list args)
+ __attribute__ ((format (printf, 1, 0)));
+asmlinkage int printk(const char * fmt, ...)
+ __attribute__ ((format (printf, 1, 2))) __cold;
+
+/*
+ * Please don't use printk_ratelimit(), because it shares ratelimiting state
+ * with all other unrelated printk_ratelimit() callsites. Instead use
+ * printk_ratelimited() or plain old __ratelimit().
+ */
+extern int __printk_ratelimit(const char *func);
+#define printk_ratelimit() __printk_ratelimit(__func__)
+extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+ unsigned int interval_msec);
+
+extern int printk_delay_msec;
+extern int dmesg_restrict;
+
+/*
+ * Print a one-time message (analogous to WARN_ONCE() et al):
+ */
+#define printk_once(x...) ({ \
+ static bool __print_once; \
+ \
+ if (!__print_once) { \
+ __print_once = true; \
+ printk(x); \
+ } \
+})
+
+void log_buf_kexec_setup(void);
+#else
+static inline int vprintk(const char *s, va_list args)
+ __attribute__ ((format (printf, 1, 0)));
+static inline int vprintk(const char *s, va_list args) { return 0; }
+static inline int printk(const char *s, ...)
+ __attribute__ ((format (printf, 1, 2)));
+static inline int __cold printk(const char *s, ...) { return 0; }
+static inline int printk_ratelimit(void) { return 0; }
+static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
+ unsigned int interval_msec) \
+ { return false; }
+
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_once(x...) printk(x)
+
+static inline void log_buf_kexec_setup(void)
+{
+}
+#endif
+
+/*
+ * Dummy printk for disabled debugging statements to use whilst maintaining
+ * gcc's format and side-effect checking.
+ */
+static inline __attribute__ ((format (printf, 1, 2)))
+int no_printk(const char *s, ...) { return 0; }
+
+extern int printk_needs_cpu(int cpu);
+extern void printk_tick(void);
+
+extern void asmlinkage __attribute__((format(printf, 1, 2)))
+ early_printk(const char *fmt, ...);
+
+static inline void console_silent(void)
+{
+ console_loglevel = 0;
+}
+
+static inline void console_verbose(void)
+{
+ if (console_loglevel)
+ console_loglevel = 15;
+}
+
+extern void dump_stack(void) __cold;
+
+enum {
+ DUMP_PREFIX_NONE,
+ DUMP_PREFIX_ADDRESS,
+ DUMP_PREFIX_OFFSET
+};
+extern void hex_dump_to_buffer(const void *buf, size_t len,
+ int rowsize, int groupsize,
+ char *linebuf, size_t linebuflen, bool ascii);
+extern void print_hex_dump(const char *level, const char *prefix_str,
+ int prefix_type, int rowsize, int groupsize,
+ const void *buf, size_t len, bool ascii);
+extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
+ const void *buf, size_t len);
+
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
+#define pr_emerg(fmt, ...) \
+ printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert(fmt, ...) \
+ printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit(fmt, ...) \
+ printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err(fmt, ...) \
+ printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning(fmt, ...) \
+ printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn pr_warning
+#define pr_notice(fmt, ...) \
+ printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info(fmt, ...) \
+ printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_cont(fmt, ...) \
+ printk(KERN_CONT fmt, ##__VA_ARGS__)
+
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#elif defined(CONFIG_DYNAMIC_DEBUG)
+/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
+#define pr_debug(fmt, ...) \
+ dynamic_pr_debug(fmt, ##__VA_ARGS__)
+#else
+#define pr_debug(fmt, ...) \
+ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
+/*
+ * ratelimited messages with local ratelimit_state,
+ * no local ratelimit_state used in the !PRINTK case
+ */
+#ifdef CONFIG_PRINTK
+#define printk_ratelimited(fmt, ...) ({ \
+ static DEFINE_RATELIMIT_STATE(_rs, \
+ DEFAULT_RATELIMIT_INTERVAL, \
+ DEFAULT_RATELIMIT_BURST); \
+ \
+ if (__ratelimit(&_rs)) \
+ printk(fmt, ##__VA_ARGS__); \
+})
+#else
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_ratelimited printk
+#endif
+
+#define pr_emerg_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn_ratelimited pr_warning_ratelimited
+#define pr_notice_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+/* no pr_cont_ratelimited, don't do that... */
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug_ratelimited(fmt, ...) \
+ ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
+ ##__VA_ARGS__); 0; })
+#endif
+
+#endif
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff