CHECKFLAGS += -D__avr32__ -D__BIG_ENDIAN
+machine-$(CONFIG_PLATFORM_AT32AP) := at32ap
+machdirs := $(patsubst %,arch/avr32/mach-%/, $(machine-y))
+
+KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs))
+
head-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/head.o
head-y += arch/avr32/kernel/head.o
-core-$(CONFIG_PLATFORM_AT32AP) += arch/avr32/mach-at32ap/
+core-y += $(machdirs)
core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/
core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/
core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
--- /dev/null
+/*
+ * Pin definitions for AT32AP7000.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_AT32AP700X_H__
+#define __ASM_ARCH_AT32AP700X_H__
+
+#define GPIO_PERIPH_A 0
+#define GPIO_PERIPH_B 1
+
+/*
+ * Pin numbers identifying specific GPIO pins on the chip. They can
+ * also be converted to IRQ numbers by passing them through
+ * gpio_to_irq().
+ */
+#define GPIO_PIOA_BASE (0)
+#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
+#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
+#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
+#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
+
+#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
+#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
+#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
+#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
+#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N))
+
+
+/*
+ * DMAC peripheral hardware handshaking interfaces, used with dw_dmac
+ */
+#define DMAC_MCI_RX 0
+#define DMAC_MCI_TX 1
+#define DMAC_DAC_TX 2
+#define DMAC_AC97_A_RX 3
+#define DMAC_AC97_A_TX 4
+#define DMAC_AC97_B_RX 5
+#define DMAC_AC97_B_TX 6
+#define DMAC_DMAREQ_0 7
+#define DMAC_DMAREQ_1 8
+#define DMAC_DMAREQ_2 9
+#define DMAC_DMAREQ_3 10
+
+#endif /* __ASM_ARCH_AT32AP700X_H__ */
--- /dev/null
+/*
+ * Platform data definitions.
+ */
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <linux/types.h>
+
+#define GPIO_PIN_NONE (-1)
+
+/*
+ * Clock rates for various on-board oscillators. The number of entries
+ * in this array is chip-dependent.
+ */
+extern unsigned long at32_board_osc_rates[];
+
+/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
+void at32_add_system_devices(void);
+
+#define ATMEL_MAX_UART 4
+extern struct platform_device *atmel_default_console_device;
+
+struct atmel_uart_data {
+ short use_dma_tx; /* use transmit DMA? */
+ short use_dma_rx; /* use receive DMA? */
+ void __iomem *regs; /* virtual base address, if any */
+};
+void at32_map_usart(unsigned int hw_id, unsigned int line);
+struct platform_device *at32_add_device_usart(unsigned int id);
+
+struct eth_platform_data {
+ u32 phy_mask;
+ u8 is_rmii;
+};
+struct platform_device *
+at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
+
+struct spi_board_info;
+struct platform_device *
+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
+
+struct atmel_lcdfb_info;
+struct platform_device *
+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+ unsigned long fbmem_start, unsigned long fbmem_len,
+ unsigned int pin_config);
+
+struct usba_platform_data;
+struct platform_device *
+at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
+
+struct ide_platform_data {
+ u8 cs;
+};
+struct platform_device *
+at32_add_device_ide(unsigned int id, unsigned int extint,
+ struct ide_platform_data *data);
+
+/* mask says which PWM channels to mux */
+struct platform_device *at32_add_device_pwm(u32 mask);
+
+/* depending on what's hooked up, not all SSC pins will be used */
+#define ATMEL_SSC_TK 0x01
+#define ATMEL_SSC_TF 0x02
+#define ATMEL_SSC_TD 0x04
+#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
+
+#define ATMEL_SSC_RK 0x10
+#define ATMEL_SSC_RF 0x20
+#define ATMEL_SSC_RD 0x40
+#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
+
+struct platform_device *
+at32_add_device_ssc(unsigned int id, unsigned int flags);
+
+struct i2c_board_info;
+struct platform_device *at32_add_device_twi(unsigned int id,
+ struct i2c_board_info *b,
+ unsigned int n);
+
+struct mci_platform_data;
+struct platform_device *
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
+
+struct ac97c_platform_data {
+ unsigned short dma_rx_periph_id;
+ unsigned short dma_tx_periph_id;
+ unsigned short dma_controller_id;
+ int reset_pin;
+};
+struct platform_device *
+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data);
+
+struct platform_device *at32_add_device_abdac(unsigned int id);
+struct platform_device *at32_add_device_psif(unsigned int id);
+
+struct cf_platform_data {
+ int detect_pin;
+ int reset_pin;
+ int vcc_pin;
+ int ready_pin;
+ u8 cs;
+};
+struct platform_device *
+at32_add_device_cf(unsigned int id, unsigned int extint,
+ struct cf_platform_data *data);
+
+/* NAND / SmartMedia */
+struct atmel_nand_data {
+ int enable_pin; /* chip enable */
+ int det_pin; /* card detect */
+ int rdy_pin; /* ready/busy */
+ u8 ale; /* address line number connected to ALE */
+ u8 cle; /* address line number connected to CLE */
+ u8 bus_width_16; /* buswidth is 16 bit */
+ struct mtd_partition *(*partition_info)(int size, int *num_partitions);
+};
+struct platform_device *
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
+
+#endif /* __ASM_ARCH_BOARD_H */
--- /dev/null
+/*
+ * AVR32 and (fake) AT91 CPU identification
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_CPU_H
+#define __ASM_ARCH_CPU_H
+
+/*
+ * Only AT32AP7000 is defined for now. We can identify the specific
+ * chip at runtime, but I'm not sure if it's really worth it.
+ */
+#ifdef CONFIG_CPU_AT32AP700X
+# define cpu_is_at32ap7000() (1)
+#else
+# define cpu_is_at32ap7000() (0)
+#endif
+
+/*
+ * Since this is AVR32, we will never run on any AT91 CPU. But these
+ * definitions may reduce clutter in common drivers.
+ */
+#define cpu_is_at91rm9200() (0)
+#define cpu_is_at91sam9xe() (0)
+#define cpu_is_at91sam9260() (0)
+#define cpu_is_at91sam9261() (0)
+#define cpu_is_at91sam9263() (0)
+#define cpu_is_at91sam9rl() (0)
+#define cpu_is_at91cap9() (0)
+
+#endif /* __ASM_ARCH_CPU_H */
--- /dev/null
+#ifndef __ASM_AVR32_ARCH_GPIO_H
+#define __ASM_AVR32_ARCH_GPIO_H
+
+#include <linux/compiler.h>
+#include <asm/irq.h>
+
+
+/* Some GPIO chips can manage IRQs; some can't. The exact numbers can
+ * be changed if needed, but for the moment they're not configurable.
+ */
+#define ARCH_NR_GPIOS (NR_GPIO_IRQS + 2 * 32)
+
+
+/* Arch-neutral GPIO API, supporting both "native" and external GPIOs. */
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned int gpio)
+{
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+ __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+ return __gpio_cansleep(gpio);
+}
+
+
+static inline int gpio_to_irq(unsigned int gpio)
+{
+ if (gpio < NR_GPIO_IRQS)
+ return gpio + GPIO_IRQ_BASE;
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+ return irq - GPIO_IRQ_BASE;
+}
+
+#endif /* __ASM_AVR32_ARCH_GPIO_H */
--- /dev/null
+/*
+ * AT32AP platform initialization calls.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_AT32AP_INIT_H__
+#define __ASM_AVR32_AT32AP_INIT_H__
+
+void setup_platform(void);
+void setup_board(void);
+
+void at32_setup_serial_console(unsigned int usart_id);
+
+#endif /* __ASM_AVR32_AT32AP_INIT_H__ */
--- /dev/null
+#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
+#define __ASM_AVR32_ARCH_AT32AP_IO_H
+
+/* For "bizarre" halfword swapping */
+#include <linux/byteorder/swabb.h>
+
+#if defined(CONFIG_AP700X_32_BIT_SMC)
+# define __swizzle_addr_b(addr) (addr ^ 3UL)
+# define __swizzle_addr_w(addr) (addr ^ 2UL)
+# define __swizzle_addr_l(addr) (addr)
+# define ioswabb(a, x) (x)
+# define ioswabw(a, x) (x)
+# define ioswabl(a, x) (x)
+# define __mem_ioswabb(a, x) (x)
+# define __mem_ioswabw(a, x) swab16(x)
+# define __mem_ioswabl(a, x) swab32(x)
+#elif defined(CONFIG_AP700X_16_BIT_SMC)
+# define __swizzle_addr_b(addr) (addr ^ 1UL)
+# define __swizzle_addr_w(addr) (addr)
+# define __swizzle_addr_l(addr) (addr)
+# define ioswabb(a, x) (x)
+# define ioswabw(a, x) (x)
+# define ioswabl(a, x) swahw32(x)
+# define __mem_ioswabb(a, x) (x)
+# define __mem_ioswabw(a, x) swab16(x)
+# define __mem_ioswabl(a, x) swahb32(x)
+#else
+# define __swizzle_addr_b(addr) (addr)
+# define __swizzle_addr_w(addr) (addr)
+# define __swizzle_addr_l(addr) (addr)
+# define ioswabb(a, x) (x)
+# define ioswabw(a, x) swab16(x)
+# define ioswabl(a, x) swab32(x)
+# define __mem_ioswabb(a, x) (x)
+# define __mem_ioswabw(a, x) (x)
+# define __mem_ioswabl(a, x) (x)
+#endif
+
+#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */
--- /dev/null
+#ifndef __ASM_AVR32_ARCH_IRQ_H
+#define __ASM_AVR32_ARCH_IRQ_H
+
+#define EIM_IRQ_BASE NR_INTERNAL_IRQS
+#define NR_EIM_IRQS 32
+#define AT32_EXTINT(n) (EIM_IRQ_BASE + (n))
+
+#define GPIO_IRQ_BASE (EIM_IRQ_BASE + NR_EIM_IRQS)
+#define NR_GPIO_CTLR (5 /*internal*/ + 1 /*external*/)
+#define NR_GPIO_IRQS (NR_GPIO_CTLR * 32)
+
+#define NR_IRQS (GPIO_IRQ_BASE + NR_GPIO_IRQS)
+
+#endif /* __ASM_AVR32_ARCH_IRQ_H */
--- /dev/null
+/*
+ * AVR32 AP Power Management.
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ARCH_PM_H
+#define __ASM_AVR32_ARCH_PM_H
+
+/* Possible arguments to the "sleep" instruction */
+#define CPU_SLEEP_IDLE 0
+#define CPU_SLEEP_FROZEN 1
+#define CPU_SLEEP_STANDBY 2
+#define CPU_SLEEP_STOP 3
+#define CPU_SLEEP_STATIC 5
+
+#ifndef __ASSEMBLY__
+extern void cpu_enter_idle(void);
+extern void cpu_enter_standby(unsigned long sdramc_base);
+
+extern bool disable_idle_sleep;
+
+static inline void cpu_disable_idle_sleep(void)
+{
+ disable_idle_sleep = true;
+}
+
+static inline void cpu_enable_idle_sleep(void)
+{
+ disable_idle_sleep = false;
+}
+
+static inline void cpu_idle_sleep(void)
+{
+ /*
+ * If we're using the COUNT and COMPARE registers for
+ * timekeeping, we can't use the IDLE state.
+ */
+ if (disable_idle_sleep)
+ cpu_relax();
+ else
+ cpu_enter_idle();
+}
+
+void intc_set_suspend_handler(unsigned long offset);
+#endif
+
+#endif /* __ASM_AVR32_ARCH_PM_H */
--- /dev/null
+/*
+ * AT32 portmux interface.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_PORTMUX_H__
+#define __ASM_ARCH_PORTMUX_H__
+
+/*
+ * Set up pin multiplexing, called from board init only.
+ *
+ * The following flags determine the initial state of the pin.
+ */
+#define AT32_GPIOF_PULLUP 0x00000001 /* (not-OUT) Enable pull-up */
+#define AT32_GPIOF_OUTPUT 0x00000002 /* (OUT) Enable output driver */
+#define AT32_GPIOF_HIGH 0x00000004 /* (OUT) Set output high */
+#define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */
+#define AT32_GPIOF_MULTIDRV 0x00000010 /* Enable multidriver option */
+
+void at32_select_periph(unsigned int pin, unsigned int periph,
+ unsigned long flags);
+void at32_select_gpio(unsigned int pin, unsigned long flags);
+void at32_reserve_pin(unsigned int pin);
+
+#endif /* __ASM_ARCH_PORTMUX_H__ */
--- /dev/null
+/*
+ * Static Memory Controller for AT32 chips
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * Inspired by the OMAP2 General-Purpose Memory Controller interface
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_AT32AP_SMC_H
+#define __ARCH_AT32AP_SMC_H
+
+/*
+ * All timing parameters are in nanoseconds.
+ */
+struct smc_timing {
+ /* Delay from address valid to assertion of given strobe */
+ int ncs_read_setup;
+ int nrd_setup;
+ int ncs_write_setup;
+ int nwe_setup;
+
+ /* Pulse length of given strobe */
+ int ncs_read_pulse;
+ int nrd_pulse;
+ int ncs_write_pulse;
+ int nwe_pulse;
+
+ /* Total cycle length of given operation */
+ int read_cycle;
+ int write_cycle;
+
+ /* Minimal recovery times, will extend cycle if needed */
+ int ncs_read_recover;
+ int nrd_recover;
+ int ncs_write_recover;
+ int nwe_recover;
+};
+
+/*
+ * All timing parameters are in clock cycles.
+ */
+struct smc_config {
+
+ /* Delay from address valid to assertion of given strobe */
+ u8 ncs_read_setup;
+ u8 nrd_setup;
+ u8 ncs_write_setup;
+ u8 nwe_setup;
+
+ /* Pulse length of given strobe */
+ u8 ncs_read_pulse;
+ u8 nrd_pulse;
+ u8 ncs_write_pulse;
+ u8 nwe_pulse;
+
+ /* Total cycle length of given operation */
+ u8 read_cycle;
+ u8 write_cycle;
+
+ /* Bus width in bytes */
+ u8 bus_width;
+
+ /*
+ * 0: Data is sampled on rising edge of NCS
+ * 1: Data is sampled on rising edge of NRD
+ */
+ unsigned int nrd_controlled:1;
+
+ /*
+ * 0: Data is driven on falling edge of NCS
+ * 1: Data is driven on falling edge of NWR
+ */
+ unsigned int nwe_controlled:1;
+
+ /*
+ * 0: NWAIT is disabled
+ * 1: Reserved
+ * 2: NWAIT is frozen mode
+ * 3: NWAIT in ready mode
+ */
+ unsigned int nwait_mode:2;
+
+ /*
+ * 0: Byte select access type
+ * 1: Byte write access type
+ */
+ unsigned int byte_write:1;
+
+ /*
+ * Number of clock cycles before data is released after
+ * the rising edge of the read controlling signal
+ *
+ * Total cycles from SMC is tdf_cycles + 1
+ */
+ unsigned int tdf_cycles:4;
+
+ /*
+ * 0: TDF optimization disabled
+ * 1: TDF optimization enabled
+ */
+ unsigned int tdf_mode:1;
+};
+
+extern void smc_set_timing(struct smc_config *config,
+ const struct smc_timing *timing);
+
+extern int smc_set_configuration(int cs, const struct smc_config *config);
+extern struct smc_config *smc_get_configuration(int cs);
+
+#endif /* __ARCH_AT32AP_SMC_H */
--- /dev/null
+/*
+ * Simple SRAM allocator
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ARCH_SRAM_H
+#define __ASM_AVR32_ARCH_SRAM_H
+
+#include <linux/genalloc.h>
+
+extern struct gen_pool *sram_pool;
+
+static inline unsigned long sram_alloc(size_t len)
+{
+ if (!sram_pool)
+ return 0UL;
+
+ return gen_pool_alloc(sram_pool, len);
+}
+
+static inline void sram_free(unsigned long addr, size_t len)
+{
+ return gen_pool_free(sram_pool, addr, len);
+}
+
+#endif /* __ASM_AVR32_ARCH_SRAM_H */
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff