0xE2 } /* (bit3-0) SmartFanII: Fan3 Level 3 */
};
+#define W83792D_REG_GPIO_EN 0x1A
#define W83792D_REG_CONFIG 0x40
#define W83792D_REG_VID_FANDIV 0x47
#define W83792D_REG_CHIPID 0x49
{
int i;
val = SENSORS_LIMIT(val, 1, 128) >> 1;
- for (i = 0; i < 6; i++) {
+ for (i = 0; i < 7; i++) {
if (val == 0)
break;
val >>= 1;
w83792d_init_client(new_client);
/* A few vars need to be filled upon startup */
- for (i = 1; i <= 7; i++) {
- data->fan_min[i - 1] = w83792d_read_value(new_client,
+ for (i = 0; i < 7; i++) {
+ data->fan_min[i] = w83792d_read_value(new_client,
W83792D_REG_FAN_MIN[i]);
}
device_create_file_fan(new_client, 1);
device_create_file_fan(new_client, 2);
device_create_file_fan(new_client, 3);
- device_create_file_fan(new_client, 4);
- device_create_file_fan(new_client, 5);
- device_create_file_fan(new_client, 6);
- device_create_file_fan(new_client, 7);
+
+ /* Read GPIO enable register to check if pins for fan 4,5 are used as
+ GPIO */
+ val1 = w83792d_read_value(new_client, W83792D_REG_GPIO_EN);
+ if (!(val1 & 0x40))
+ device_create_file_fan(new_client, 4);
+ if (!(val1 & 0x20))
+ device_create_file_fan(new_client, 5);
+
+ val1 = w83792d_read_value(new_client, W83792D_REG_PIN);
+ if (val1 & 0x40)
+ device_create_file_fan(new_client, 6);
+ if (val1 & 0x04)
+ device_create_file_fan(new_client, 7);
device_create_file_temp1(new_client); /* Temp1 */
device_create_file_temp_add(new_client, 2); /* Temp2 */