#include "../rtmp_iface.h"
#include "../rtmp_dot11.h"
-//
-// Device ID & Vendor ID related definitions,
-// NOTE: you should not add the new VendorID/DeviceID here unless you not sure it belongs to what chip.
-//
+/* */
+/* Device ID & Vendor ID related definitions, */
+/* NOTE: you should not add the new VendorID/DeviceID here unless you not sure it belongs to what chip. */
+/* */
#define NIC_PCI_VENDOR_ID 0x1814
#define PCIBUS_INTEL_VENDOR 0x8086
#define AUX_CTRL 0x10c
-//
-// TX descriptor format, Tx ring, Mgmt Ring
-//
+/* */
+/* TX descriptor format, Tx ring, Mgmt Ring */
+/* */
struct PACKED rt_txd {
- // Word 0
+ /* Word 0 */
u32 SDPtr0;
- // Word 1
+ /* Word 1 */
u32 SDLen1:14;
u32 LastSec1:1;
u32 Burst:1;
u32 SDLen0:14;
u32 LastSec0:1;
u32 DMADONE:1;
- //Word2
+ /*Word2 */
u32 SDPtr1;
- //Word3
+ /*Word3 */
u32 rsv2:24;
u32 WIV:1; /* Wireless Info Valid. 1 if Driver already fill WI, o if DMA needs to copy WI to correctposition */
u32 QSEL:2; /* select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA */
u32 ICO:1; /* */
};
-//
-// Rx descriptor format, Rx Ring
-//
+/* */
+/* Rx descriptor format, Rx Ring */
+/* */
typedef struct PACKED rt_rxd {
- // Word 0
+ /* Word 0 */
u32 SDP0;
- // Word 1
+ /* Word 1 */
u32 SDL1:14;
u32 Rsv:2;
u32 SDL0:14;
u32 LS0:1;
u32 DDONE:1;
- // Word 2
+ /* Word 2 */
u32 SDP1;
- // Word 3
+ /* Word 3 */
u32 BA:1;
u32 DATA:1;
u32 NULLDATA:1;
/* ----------------- EEPROM Related MACRO ----------------- */
-// 8051 firmware image for RT2860 - base address = 0x4000
+/* 8051 firmware image for RT2860 - base address = 0x4000 */
#define FIRMWARE_IMAGE_BASE 0x2000
-#define MAX_FIRMWARE_IMAGE_SIZE 0x2000 // 8kbyte
+#define MAX_FIRMWARE_IMAGE_SIZE 0x2000 /* 8kbyte */
/* ----------------- Frimware Related MACRO ----------------- */
#define RTMP_WRITE_FIRMWARE(_pAd, _pFwImage, _FwLen) \
/* ----------------- RX Related MACRO ----------------- */
/* ----------------- ASIC Related MACRO ----------------- */
-// reset MAC of a station entry to 0x000000000000
+/* reset MAC of a station entry to 0x000000000000 */
#define RTMP_STA_ENTRY_MAC_RESET(pAd, Wcid) \
AsicDelWcidTab(pAd, Wcid);
-// add this entry into ASIC RX WCID search table
+/* add this entry into ASIC RX WCID search table */
#define RTMP_STA_ENTRY_ADD(pAd, pEntry) \
AsicUpdateRxWCIDTable(pAd, pEntry->Aid, pEntry->Addr);
-// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
-// Set MAC register value according operation mode
+/* add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet */
+/* Set MAC register value according operation mode */
#define RTMP_UPDATE_PROTECT(pAd) \
AsicUpdateProtect(pAd, 0, (ALLN_SETPROTECT), TRUE, 0);
-// end johnli
+/* end johnli */
-// remove Pair-wise key material from ASIC
+/* remove Pair-wise key material from ASIC */
#define RTMP_STA_ENTRY_KEY_DEL(pAd, BssIdx, Wcid) \
AsicRemovePairwiseKeyEntry(pAd, BssIdx, (u8)Wcid);
-// add Client security information into ASIC WCID table and IVEIV table
+/* add Client security information into ASIC WCID table and IVEIV table */
#define RTMP_STA_SECURITY_INFO_ADD(pAd, apidx, KeyID, pEntry) \
RTMPAddWcidAttributeEntry(pAd, apidx, KeyID, \
pAd->SharedKey[apidx][KeyID].CipherAlg, pEntry);
pAd->SharedKey[apidx][KeyID].CipherAlg, \
pEntry); }
-// Insert the BA bitmap to ASIC for the Wcid entry
+/* Insert the BA bitmap to ASIC for the Wcid entry */
#define RTMP_ADD_BA_SESSION_TO_ASIC(_pAd, _Aid, _TID) \
do{ \
u32 _Value = 0, _Offset; \
RTMP_IO_WRITE32((_pAd), _Offset, _Value);\
}while(0)
-// Remove the BA bitmap from ASIC for the Wcid entry
-// bitmap field starts at 0x10000 in ASIC WCID table
+/* Remove the BA bitmap from ASIC for the Wcid entry */
+/* bitmap field starts at 0x10000 in ASIC WCID table */
#define RTMP_DEL_BA_SESSION_FROM_ASIC(_pAd, _Wcid, _TID) \
do{ \
u32 _Value = 0, _Offset; \
/* ----------------- Interface Related MACRO ----------------- */
-//
-// Enable & Disable NIC interrupt via writing interrupt mask register
-// Since it use ADAPTER structure, it have to be put after structure definition.
-//
+/* */
+/* Enable & Disable NIC interrupt via writing interrupt mask register */
+/* Since it use ADAPTER structure, it have to be put after structure definition. */
+/* */
#define RTMP_ASIC_INTERRUPT_DISABLE(_pAd) \
do{ \
RTMP_IO_WRITE32((_pAd), INT_MASK_CSR, 0x0); /* 0: disable */ \
/* ----------------- Power Save Related MACRO ----------------- */
#define RTMP_PS_POLL_ENQUEUE(pAd) EnqueuePsPoll(pAd)
-// For RTMPPCIePowerLinkCtrlRestore () function
+/* For RTMPPCIePowerLinkCtrlRestore () function */
#define RESTORE_HALT 1
#define RESTORE_WAKEUP 2
#define RESTORE_CLOSE 3
#define RTMP_MLME_RADIO_OFF(pAd) \
RT28xxPciMlmeRadioOFF(pAd);
-#endif //__MAC_PCI_H__ //
+#endif /*__MAC_PCI_H__ // */