hwmon: (adm1025) Clean up detect function

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 4db04d603ec9c7feed84b7fdeba670c480310fad..db6ac2b04f6f867ba2803b279539059faf4735db 100644 (file)
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -2,7 +2,7 @@
  * adm1025.c
  *
  * Copyright (C) 2000       Chen-Yuan Wu <gwu@esoft.com>
- * Copyright (C) 2003-2008  Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2009  Jean Delvare <khali@linux-fr.org>
  *
  * The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6
  * voltages (including its own power source) and up to two temperatures
@@ -413,67 +413,34 @@ static int adm1025_detect(struct i2c_client *client, int kind,
                          struct i2c_board_info *info)
 {
        struct i2c_adapter *adapter = client->adapter;
-       const char *name = "";
-       u8 config;
+       const char *name;
+       u8 man_id, chip_id;
 
        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
                return -ENODEV;
 
-       /*
-        * Now we do the remaining detection. A negative kind means that
-        * the driver was loaded with no force parameter (default), so we
-        * must both detect and identify the chip. A zero kind means that
-        * the driver was loaded with the force parameter, the detection
-        * step shall be skipped. A positive kind means that the driver
-        * was loaded with the force parameter and a given kind of chip is
-        * requested, so both the detection and the identification steps
-        * are skipped.
-        */
-       config = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);
-       if (kind < 0) { /* detection */
-               if ((config & 0x80) != 0x00
-                || (i2c_smbus_read_byte_data(client,
-                    ADM1025_REG_STATUS1) & 0xC0) != 0x00
-                || (i2c_smbus_read_byte_data(client,
-                    ADM1025_REG_STATUS2) & 0xBC) != 0x00) {
-                       dev_dbg(&adapter->dev,
-                               "ADM1025 detection failed at 0x%02x.\n",
-                               client->addr);
-                       return -ENODEV;
-               }
+       /* Check for unused bits */
+       if ((i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG) & 0x80)
+        || (i2c_smbus_read_byte_data(client, ADM1025_REG_STATUS1) & 0xC0)
+        || (i2c_smbus_read_byte_data(client, ADM1025_REG_STATUS2) & 0xBC)) {
+               dev_dbg(&adapter->dev, "ADM1025 detection failed at 0x%02x\n",
+                       client->addr);
+               return -ENODEV;
        }
 
-       if (kind <= 0) { /* identification */
-               u8 man_id, chip_id;
-
-               man_id = i2c_smbus_read_byte_data(client, ADM1025_REG_MAN_ID);
-               chip_id = i2c_smbus_read_byte_data(client, ADM1025_REG_CHIP_ID);
-
-               if (man_id == 0x41) { /* Analog Devices */
-                       if ((chip_id & 0xF0) == 0x20) { /* ADM1025/ADM1025A */
-                               kind = adm1025;
-                       }
-               } else
-               if (man_id == 0xA1) { /* Philips */
-                       if (client->addr != 0x2E
-                        && (chip_id & 0xF0) == 0x20) { /* NE1619 */
-                               kind = ne1619;
-                       }
-               }
-
-               if (kind <= 0) { /* identification failed */
-                       dev_info(&adapter->dev,
-                           "Unsupported chip (man_id=0x%02X, "
-                           "chip_id=0x%02X).\n", man_id, chip_id);
-                       return -ENODEV;
-               }
-       }
+       /* Identification */
+       chip_id = i2c_smbus_read_byte_data(client, ADM1025_REG_CHIP_ID);
+       if ((chip_id & 0xF0) != 0x20)
+               return -ENODEV;
 
-       if (kind == adm1025) {
+       man_id = i2c_smbus_read_byte_data(client, ADM1025_REG_MAN_ID);
+       if (man_id == 0x41)
                name = "adm1025";
-       } else if (kind == ne1619) {
+       else if (man_id == 0xA1 && client->addr != 0x2E)
                name = "ne1619";
-       }
+       else
+               return -ENODEV;
+
        strlcpy(info->type, name, I2C_NAME_SIZE);
 
        return 0;