net: fec: Issue error for missing but expected PHY
authorAndrew Lunn <andrew@lunn.ch>
Sun, 30 Jul 2017 20:11:06 +0000 (22:11 +0200)
committerDavid S. Miller <davem@davemloft.net>
Mon, 31 Jul 2017 02:25:22 +0000 (19:25 -0700)
If the PHY is missing but expected, e.g. because of a typ0 in the dt
file, it is not possible to open the interface. ip link returns:

RTNETLINK answers: No such device

It is not very obvious what the problem is. Add a netdev_err() in this
case to make it easier to debug the issue.

[   21.409385] fec 2188000.ethernet eth0: Unable to connect to phy
RTNETLINK answers: No such device

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/freescale/fec_main.c

index a6e323f1563745c3a0cedd91d240e05af6606f33..faa36f6ddf2907b6b7601e50f416669a51047750 100644 (file)
@@ -1904,8 +1904,10 @@ static int fec_enet_mii_probe(struct net_device *ndev)
                phy_dev = of_phy_connect(ndev, fep->phy_node,
                                         &fec_enet_adjust_link, 0,
                                         fep->phy_interface);
-               if (!phy_dev)
+               if (!phy_dev) {
+                       netdev_err(ndev, "Unable to connect to phy\n");
                        return -ENODEV;
+               }
        } else {
                /* check for attached phy */
                for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {