omap2/3: Make get_irqnr_and_base common for mach-omap2 multiboot
authorTony Lindgren <tony@atomide.com>
Mon, 15 Feb 2010 17:26:51 +0000 (09:26 -0800)
committerTony Lindgren <tony@atomide.com>
Mon, 15 Feb 2010 17:26:51 +0000 (09:26 -0800)
Make get_irqnr_and_base common for mach-omap2 multiboot

Thanks to a tip from Russell King <rmk+kernel@arm.linux.org.uk>,
this also optimizes the code for non-multiboot configurations by
using get_irqnr_preamble.

Note that this will only work currently for 24xx and 34xx.
Support for 44xx can be added later on for basic multiboot,
and similar patch should be done for mach-omap1/entry-macro.S.

Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/mach-omap2/include/mach/entry-macro.S

index c7f1720bf2824fffcbc79e19678b68b735589a63..4fd6b1bdcb2bff0b3968e52d20c8814c6d66a18a 100644 (file)
 
 #include <plat/omap24xx.h>
 #include <plat/omap34xx.h>
-
-/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
-#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
-#define OMAP2_VA_IC_BASE               OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
-#elif defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP2_VA_IC_BASE               OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
 #include <plat/omap44xx.h>
-#endif
-#define INTCPS_SIR_IRQ_OFFSET  0x0040          /* Active interrupt offset */
-#define        ACTIVEIRQ_MASK          0x7f            /* Active interrupt bits */
 
                .macro  disable_fiq
                .endm
 
-               .macro  get_irqnr_preamble, base, tmp
-               .endm
-
                .macro  arch_ret_to_user, tmp1, tmp2
                .endm
 
-#ifndef CONFIG_ARCH_OMAP4
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
+#define OMAP2_IRQ_BASE         OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP3_IRQ_BASE         OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
+#define INTCPS_SIR_IRQ_OFFSET  0x0040          /* Active interrupt offset */
+#define        ACTIVEIRQ_MASK          0x7f            /* Active interrupt bits */
+
+               .pushsection .data
+omap_irq_base: .word   0
+               .popsection
+
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_ARCH_OMAP3)
+               /* Configure the interrupt base on the first interrupt */
+               .macro  get_irqnr_preamble, base, tmp
+9:
+               ldr     \base, =omap_irq_base   @ irq base address
+               ldr     \base, [\base, #0]      @ irq base value
+               cmp     \base, #0               @ already configured?
+               bne     9998f                   @ nothing to do
+
+               mrc     p15, 0, \tmp, c0, c0, 0 @ get processor revision
+               and     \tmp, \tmp, #0x000f0000 @ only check architecture
+               cmp     \tmp, #0x00060000       @ is v6?
+               beq     2400f                   @ found v6 so it's omap24xx
+               cmp     \tmp, #0x000f0000       @ is cortex?
+               beq     3400f                   @ found v7 so it's omap34xx
+2400:          ldr     \base, =OMAP2_IRQ_BASE
+               ldr     \tmp, =omap_irq_base
+               str     \base, [\tmp, #0]
+               b       9b
+3400:          ldr     \base, =OMAP3_IRQ_BASE
+               ldr     \tmp, =omap_irq_base
+               str     \base, [\tmp, #0]
+               b       9b
+9998:
+               .endm
+#else
+               .macro  get_irqnr_preamble, base, tmp
+#ifdef CONFIG_ARCH_OMAP2
+               ldr     \base, =OMAP2_IRQ_BASE
+#else
+               ldr     \base, =OMAP3_IRQ_BASE
+#endif
+               .endm
+#endif
+               /* Check the pending interrupts. Note that base already set */
                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-               ldr     \base, =OMAP2_VA_IC_BASE
                ldr     \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
                cmp     \irqnr, #0x0
-               bne     2222f
+               bne     9999f
                ldr     \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
                cmp     \irqnr, #0x0
-               bne     2222f
+               bne     9999f
                ldr     \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
                cmp     \irqnr, #0x0
-2222:
+9999:
                ldrne   \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
                and     \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
 
                .endm
-#else
+#endif
+
+
+#ifdef CONFIG_ARCH_OMAP4
+
 #define OMAP44XX_VA_GIC_CPU_BASE       OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
 
+               .macro  get_irqnr_preamble, base, tmp
+               .endm
+
                /*
                 * The interrupt numbering scheme is defined in the
                 * interrupt controller spec.  To wit: