omap: Beagle: revision detection
authorRobert Nelson <robertcnelson@gmail.com>
Fri, 24 Sep 2010 01:22:47 +0000 (18:22 -0700)
committerTony Lindgren <tony@atomide.com>
Fri, 24 Sep 2010 01:22:47 +0000 (18:22 -0700)
Due to the omap3530 ES3.0 Silicon being used on both the
B5/B6 and C1/2/3 Beagle we can't use the cpu_is_omap34xx()
routines to differentiate the Beagle Boards.

However gpio pins 171,172,173 where setup for this prupose, so
lets use them.

Changes:
for older U-Boot's, use omap_mux_init_gpio()
keep Beagle Rev in board-omap3beagle.c
gpio_free on gpio request failure

Tested on Beagle Revisions: B5, C2, C4, and xMA

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/mach-omap2/board-omap3beagle.c

index 87969c7df652885ff6210519f3043cb7bb4f055e..1aebb3f4f20a3e1054521aa775d3dd162537316d 100644 (file)
 
 #define NAND_BLOCK_SIZE                SZ_128K
 
+/*
+ * OMAP3 Beagle revision
+ * Run time detection of Beagle revision is done by reading GPIO.
+ * GPIO ID -
+ *     AXBX    = GPIO173, GPIO172, GPIO171: 1 1 1
+ *     C1_3    = GPIO173, GPIO172, GPIO171: 1 1 0
+ *     C4      = GPIO173, GPIO172, GPIO171: 1 0 1
+ *     XM      = GPIO173, GPIO172, GPIO171: 0 0 0
+ */
+enum {
+       OMAP3BEAGLE_BOARD_UNKN = 0,
+       OMAP3BEAGLE_BOARD_AXBX,
+       OMAP3BEAGLE_BOARD_C1_3,
+       OMAP3BEAGLE_BOARD_C4,
+       OMAP3BEAGLE_BOARD_XM,
+};
+
+static u8 omap3_beagle_version;
+
+static u8 omap3_beagle_get_rev(void)
+{
+       return omap3_beagle_version;
+}
+
+static void __init omap3_beagle_init_rev(void)
+{
+       int ret;
+       u16 beagle_rev = 0;
+
+       omap_mux_init_gpio(171, OMAP_PIN_INPUT_PULLUP);
+       omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP);
+       omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP);
+
+       ret = gpio_request(171, "rev_id_0");
+       if (ret < 0)
+               goto fail0;
+
+       ret = gpio_request(172, "rev_id_1");
+       if (ret < 0)
+               goto fail1;
+
+       ret = gpio_request(173, "rev_id_2");
+       if (ret < 0)
+               goto fail2;
+
+       gpio_direction_input(171);
+       gpio_direction_input(172);
+       gpio_direction_input(173);
+
+       beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
+                       | (gpio_get_value(173) << 2);
+
+       switch (beagle_rev) {
+       case 7:
+               printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
+               omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
+               break;
+       case 6:
+               printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
+               omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
+               break;
+       case 5:
+               printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
+               omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
+               break;
+       case 0:
+               printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
+               omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
+               break;
+       default:
+               printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
+               omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
+       }
+
+       return;
+
+fail2:
+       gpio_free(172);
+fail1:
+       gpio_free(171);
+fail0:
+       printk(KERN_ERR "Unable to get revision detection GPIO pins\n");
+       omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
+
+       return;
+}
+
 static struct mtd_partition omap3beagle_nand_partitions[] = {
        /* All the partition sizes are listed in terms of NAND block size */
        {
@@ -464,6 +551,7 @@ static struct omap_musb_board_data musb_board_data = {
 static void __init omap3_beagle_init(void)
 {
        omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+       omap3_beagle_init_rev();
        omap3_beagle_i2c_init();
        platform_add_devices(omap3_beagle_devices,
                        ARRAY_SIZE(omap3_beagle_devices));