static void ixgbevf_negotiate_api(struct ixgbevf_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
- int api[] = { ixgbe_mbox_api_11,
+ int api[] = { ixgbe_mbox_api_12,
+ ixgbe_mbox_api_11,
ixgbe_mbox_api_10,
ixgbe_mbox_api_unknown };
int err = 0, idx = 0;
switch (hw->api_version) {
case ixgbe_mbox_api_11:
+ case ixgbe_mbox_api_12:
adapter->num_rx_queues = rss;
adapter->num_tx_queues = rss;
default:
switch (adapter->hw.api_version) {
case ixgbe_mbox_api_11:
+ case ixgbe_mbox_api_12:
max_possible_frame = IXGBE_MAX_JUMBO_FRAME_SIZE;
break;
default:
ixgbe_mbox_api_10, /* API version 1.0, linux/freebsd VF driver */
ixgbe_mbox_api_20, /* API version 2.0, solaris Phase1 VF driver */
ixgbe_mbox_api_11, /* API version 1.1, linux/freebsd VF driver */
+ ixgbe_mbox_api_12, /* API version 1.2, linux/freebsd VF driver */
/* This value should always be last */
ixgbe_mbox_api_unknown, /* indicates that API version is not known */
};
#define IXGBE_VF_TRANS_VLAN 3 /* Indication of port VLAN */
#define IXGBE_VF_DEF_QUEUE 4 /* Default queue offset */
+/* mailbox API, version 1.2 VF requests */
+#define IXGBE_VF_GET_RETA 0x0a /* VF request for RETA */
+
/* length of permanent address message returned from PF */
#define IXGBE_VF_PERMADDR_MSG_LEN 4
/* word in permanent address message with the current multicast type */
return ret_val;
}
+/**
+ * ixgbevf_get_reta_locked - get the RSS redirection table (RETA) contents.
+ * @adapter: pointer to the port handle
+ * @reta: buffer to fill with RETA contents.
+ * @num_rx_queues: Number of Rx queues configured for this port
+ *
+ * The "reta" buffer should be big enough to contain 32 registers.
+ *
+ * Returns: 0 on success.
+ * if API doesn't support this operation - (-EOPNOTSUPP).
+ */
+int ixgbevf_get_reta_locked(struct ixgbe_hw *hw, u32 *reta, int num_rx_queues)
+{
+ int err, i, j;
+ u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
+ u32 *hw_reta = &msgbuf[1];
+ u32 mask = 0;
+
+ /* We have to use a mailbox for 82599 and x540 devices only.
+ * For these devices RETA has 128 entries.
+ * Also these VFs support up to 4 RSS queues. Therefore PF will compress
+ * 16 RETA entries in each DWORD giving 2 bits to each entry.
+ */
+ int dwords = IXGBEVF_82599_RETA_SIZE / 16;
+
+ /* We support the RSS querying for 82599 and x540 devices only.
+ * Thus return an error if API doesn't support RETA querying or querying
+ * is not supported for this device type.
+ */
+ if (hw->api_version != ixgbe_mbox_api_12 ||
+ hw->mac.type >= ixgbe_mac_X550_vf)
+ return -EOPNOTSUPP;
+
+ msgbuf[0] = IXGBE_VF_GET_RETA;
+
+ err = hw->mbx.ops.write_posted(hw, msgbuf, 1);
+
+ if (err)
+ return err;
+
+ err = hw->mbx.ops.read_posted(hw, msgbuf, dwords + 1);
+
+ if (err)
+ return err;
+
+ msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+ /* If the operation has been refused by a PF return -EPERM */
+ if (msgbuf[0] == (IXGBE_VF_GET_RETA | IXGBE_VT_MSGTYPE_NACK))
+ return -EPERM;
+
+ /* If we didn't get an ACK there must have been
+ * some sort of mailbox error so we should treat it
+ * as such.
+ */
+ if (msgbuf[0] != (IXGBE_VF_GET_RETA | IXGBE_VT_MSGTYPE_ACK))
+ return IXGBE_ERR_MBX;
+
+ /* ixgbevf doesn't support more than 2 queues at the moment */
+ if (num_rx_queues > 1)
+ mask = 0x1;
+
+ for (i = 0; i < dwords; i++)
+ for (j = 0; j < 16; j++)
+ reta[i * 16 + j] = (hw_reta[i] >> (2 * j)) & mask;
+
+ return 0;
+}
+
/**
* ixgbevf_set_rar_vf - set device MAC address
* @hw: pointer to hardware structure
/* do nothing if API doesn't support ixgbevf_get_queues */
switch (hw->api_version) {
case ixgbe_mbox_api_11:
+ case ixgbe_mbox_api_12:
break;
default:
return 0;