ARM: OMAP: AM3517evm: Adapt to ehci-omap changes

Use usbhs_init_phys() to register the PHY's RESET regulators
and the NOP PHY device.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 9fb85908a61e498a7ae7ec27f18fe2f7b45756db..191f9762ba63c4eb4368b95a862b17228ac5049c 100644 (file)
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -274,6 +274,14 @@ static __init void am3517_evm_mcbsp1_init(void)
        omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
 }
 
+static struct usbhs_phy_data phy_data[] __initdata = {
+       {
+               .port = 1,
+               .reset_gpio = 57,
+               .vcc_gpio = -EINVAL,
+       },
+};
+
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
@@ -282,12 +290,6 @@ static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 #else
        .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 #endif
-       .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-       .phy_reset  = true,
-       .reset_gpio_port[0]  = 57,
-       .reset_gpio_port[1]  = -EINVAL,
-       .reset_gpio_port[2]  = -EINVAL
 };
 
 #ifdef CONFIG_OMAP_MUX
@@ -349,7 +351,6 @@ static struct omap2_hsmmc_info mmc[] = {
        {}      /* Terminator */
 };
 
-
 static void __init am3517_evm_init(void)
 {
        omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -361,6 +362,8 @@ static void __init am3517_evm_init(void)
 
        /* Configure GPIO for EHCI port */
        omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
+
+       usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
        usbhs_init(&usbhs_bdata);
        am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
        /* DSS */