[ARM] 4355/2: AT91: SAM9260-EK and SAM9263-EK board updates
authorAndrew Victor <andrew@sanpeople.com>
Thu, 3 May 2007 13:39:41 +0000 (14:39 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Thu, 3 May 2007 16:42:42 +0000 (17:42 +0100)
Various small changes for the Atmel AT91SAM9260-EK and AT91SAM9263-EK
boards.

SAM9260-EK:
  - Register I2C device.

SAM9263-EK:
  - Add platform_data and register MACB device.
    (Patch by Nicolas Ferre)
  - Add platform_data and register AC97 device.
    (Patch by Nicolas Ferre)
  - Register I2C device.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/mach-at91/board-sam9260ek.c
arch/arm/mach-at91/board-sam9263ek.c

index 7a31db01b6fed05933366f7cc7d6aba29451a130..65fa532bb4acd134e0945affbe336d33187f7a40 100644 (file)
@@ -104,9 +104,9 @@ static struct spi_board_info ek_spi_devices[] = {
        },
 #endif
 #endif
-#if defined(CONFIG_SND_AT73C213)
+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
        {       /* AT73C213 DAC */
-               .modalias       = "snd_at73c213",
+               .modalias       = "at73c213",
                .chip_select    = 0,
                .max_speed_hz   = 10 * 1000 * 1000,
                .bus_num        = 1,
@@ -188,6 +188,8 @@ static void __init ek_board_init(void)
        at91_add_device_eth(&ek_macb_data);
        /* MMC */
        at91_add_device_mmc(0, &ek_mmc_data);
+       /* I2C */
+       at91_add_device_i2c();
 }
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
index 81d3d6a0a86aa217cef2c367dd85626effd0f1a8..f57458559fb66da229df4273f2aebf56f79739dd 100644 (file)
@@ -156,6 +156,14 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
 };
 
 
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+       .is_rmii        = 1,
+};
+
+
 /*
  * NAND flash
  */
@@ -193,6 +201,14 @@ static struct at91_nand_data __initdata ek_nand_data = {
 };
 
 
+/*
+ * AC97
+ */
+static struct atmel_ac97_data ek_ac97_data = {
+       .reset_pin      = AT91_PIN_PA13,
+};
+
+
 static void __init ek_board_init(void)
 {
        /* Serial */
@@ -208,8 +224,14 @@ static void __init ek_board_init(void)
        ek_add_device_ts();
        /* MMC */
        at91_add_device_mmc(1, &ek_mmc_data);
+       /* Ethernet */
+       at91_add_device_eth(&ek_macb_data);
        /* NAND */
        at91_add_device_nand(&ek_nand_data);
+       /* I2C */
+       at91_add_device_i2c();
+       /* AC97 */
+       at91_add_device_ac97(&ek_ac97_data);
 }
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")