c_can_obj_update(dev, iface, cmd | IF_COMM_WR, obj);
}
+/*
+ * Note: According to documentation clearing TXIE while MSGVAL is set
+ * is not allowed, but works nicely on C/DCAN. And that lowers the I/O
+ * load significantly.
+ */
+static void c_can_inval_tx_object(struct net_device *dev, int iface, int obj)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+
+ priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), 0);
+ c_can_object_put(dev, iface, obj, IF_COMM_INVAL);
+}
+
+static void c_can_inval_msg_object(struct net_device *dev, int iface, int obj)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+
+ priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), 0);
+ priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), 0);
+ c_can_inval_tx_object(dev, iface, obj);
+}
+
static void c_can_setup_tx_object(struct net_device *dev, int iface,
- struct can_frame *frame, int obj)
+ struct can_frame *frame, int idx)
{
struct c_can_priv *priv = netdev_priv(dev);
u16 ctrl = IF_MCONT_TX | frame->can_dlc;
+ bool rtr = frame->can_id & CAN_RTR_FLAG;
u32 arb = IF_ARB_MSGVAL;
int i;
arb |= (frame->can_id & CAN_SFF_MASK) << 18;
}
- if (!(frame->can_id & CAN_RTR_FLAG))
+ if (!rtr)
arb |= IF_ARB_TRANSMIT;
+ /*
+ * If we change the DIR bit, we need to invalidate the buffer
+ * first, i.e. clear the MSGVAL flag in the arbiter.
+ */
+ if (rtr != (bool)test_bit(idx, &priv->tx_dir)) {
+ u32 obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
+
+ c_can_inval_msg_object(dev, iface, obj);
+ change_bit(idx, &priv->tx_dir);
+ }
+
priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), arb);
priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), arb >> 16);
c_can_object_put(dev, iface, obj, IF_COMM_RCV_SETUP);
}
-static void c_can_inval_msg_object(struct net_device *dev, int iface, int obj)
-{
- struct c_can_priv *priv = netdev_priv(dev);
-
- priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), 0);
- priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), 0);
- priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), 0);
-
- c_can_object_put(dev, iface, obj, IF_COMM_INVAL);
-}
-
static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
* can_put_echo_skb(). We must do this before we enable
* transmit as we might race against do_tx().
*/
- c_can_setup_tx_object(dev, IF_TX, frame, obj);
+ c_can_setup_tx_object(dev, IF_TX, frame, idx);
priv->dlc[idx] = frame->can_dlc;
can_put_echo_skb(skb, dev, idx);
/* Clear all internal status */
atomic_set(&priv->tx_active, 0);
priv->rxmasked = 0;
+ priv->tx_dir = 0;
/* set bittiming params */
return c_can_set_bittiming(dev);
idx--;
pend &= ~(1 << idx);
obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
- c_can_inval_msg_object(dev, IF_RX, obj);
+ c_can_inval_tx_object(dev, IF_RX, obj);
can_get_echo_skb(dev, idx);
bytes += priv->dlc[idx];
pkts++;