arm: dts: lpc32xx: add clock properties to device nodes

The change adds clock properties to all described peripheral devices,
clock ids are taken from dt-bindings/clock/lpc32xx-clock.h

Some existing drivers expect to get clock names, in those cases
clock-names are added as well.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 65023c1ff796e1e424e38bba1d7899a616b469a8..792468ebec7cddf0ed94ca10a91afaf1cc63f7fa 100644 (file)
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -13,6 +13,8 @@
 
 #include "skeleton.dtsi"
 
+#include <dt-bindings/clock/lpc32xx-clock.h>
+
 / {
        compatible = "nxp,lpc3220";
        interrupt-parent = <&mic>;
@@ -57,6 +59,7 @@
                slc: flash@20020000 {
                        compatible = "nxp,lpc3220-slc";
                        reg = <0x20020000 0x1000>;
+                       clocks = <&clk LPC32XX_CLK_SLC>;
                        status = "disabled";
                };
 
@@ -64,6 +67,7 @@
                        compatible = "nxp,lpc3220-mlc";
                        reg = <0x200a8000 0x11000>;
                        interrupts = <11 0>;
+                       clocks = <&clk LPC32XX_CLK_MLC>;
                        status = "disabled";
                };
 
@@ -71,6 +75,8 @@
                        compatible = "arm,pl080", "arm,primecell";
                        reg = <0x31000000 0x1000>;
                        interrupts = <0x1c 0>;
+                       clocks = <&clk LPC32XX_CLK_DMA>;
+                       clock-names = "apb_pclk";
                };
 
                usb {
@@ -110,6 +116,8 @@
                        compatible = "arm,pl110", "arm,primecell";
                        reg = <0x31040000 0x1000>;
                        interrupts = <0x0e 0>;
+                       clocks = <&clk LPC32XX_CLK_LCD>;
+                       clock-names = "apb_pclk";
                        status = "disabled";
                };
 
@@ -117,11 +125,14 @@
                        compatible = "nxp,lpc-eth";
                        reg = <0x31060000 0x1000>;
                        interrupts = <0x1d 0>;
+                       clocks = <&clk LPC32XX_CLK_MAC>;
                };
 
                emc: memory-controller@31080000 {
                        compatible = "arm,pl175", "arm,primecell";
                        reg = <0x31080000 0x1000>;
+                       clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>;
+                       clock-names = "mpmcclk", "apb_pclk";
                        #address-cells = <1>;
                        #size-cells = <1>;
 
@@ -142,6 +153,8 @@
                                compatible = "arm,pl022", "arm,primecell";
                                reg = <0x20084000 0x1000>;
                                interrupts = <0x14 0>;
+                               clocks = <&clk LPC32XX_CLK_SSP0>;
+                               clock-names = "apb_pclk";
                        };
 
                        spi1: spi@20088000 {
@@ -153,6 +166,8 @@
                                compatible = "arm,pl022", "arm,primecell";
                                reg = <0x2008c000 0x1000>;
                                interrupts = <0x15 0>;
+                               clocks = <&clk LPC32XX_CLK_SSP1>;
+                               clock-names = "apb_pclk";
                        };
 
                        spi2: spi@20090000 {
@@ -169,6 +184,8 @@
                                compatible = "arm,pl18x", "arm,primecell";
                                reg = <0x20098000 0x1000>;
                                interrupts = <0x0f 0>, <0x0d 0>;
+                               clocks = <&clk LPC32XX_CLK_SD>;
+                               clock-names = "apb_pclk";
                                status = "disabled";
                        };
 
@@ -185,6 +202,7 @@
                                interrupts = <9 0>;
                                clock-frequency = <13000000>;
                                reg-shift = <2>;
+                               clocks = <&clk LPC32XX_CLK_UART5>;
                                status = "disabled";
                        };
 
@@ -194,6 +212,7 @@
                                interrupts = <7 0>;
                                clock-frequency = <13000000>;
                                reg-shift = <2>;
+                               clocks = <&clk LPC32XX_CLK_UART3>;
                                status = "disabled";
                        };
 
@@ -203,6 +222,7 @@
                                interrupts = <8 0>;
                                clock-frequency = <13000000>;
                                reg-shift = <2>;
+                               clocks = <&clk LPC32XX_CLK_UART4>;
                                status = "disabled";
                        };
 
@@ -212,6 +232,7 @@
                                interrupts = <10 0>;
                                clock-frequency = <13000000>;
                                reg-shift = <2>;
+                               clocks = <&clk LPC32XX_CLK_UART6>;
                                status = "disabled";
                        };
 
@@ -222,6 +243,7 @@
                                #address-cells = <1>;
                                #size-cells = <0>;
                                pnx,timeout = <0x64>;
+                               clocks = <&clk LPC32XX_CLK_I2C1>;
                        };
 
                        i2c2: i2c@400A8000 {
@@ -231,6 +253,7 @@
                                #address-cells = <1>;
                                #size-cells = <0>;
                                pnx,timeout = <0x64>;
+                               clocks = <&clk LPC32XX_CLK_I2C2>;
                        };
 
                        mpwm: mpwm@400E8000 {
@@ -302,6 +325,7 @@
                                compatible = "nxp,lpc3220-rtc";
                                reg = <0x40024000 0x1000>;
                                interrupts = <0x34 0>;
+                               clocks = <&clk LPC32XX_CLK_RTC>;
                        };
 
                        gpio: gpio@40028000 {
@@ -315,6 +339,8 @@
                                compatible = "nxp,lpc3220-timer";
                                reg = <0x4002C000 0x1000>;
                                interrupts = <0x3 0>;
+                               clocks = <&clk LPC32XX_CLK_TIMER4>;
+                               clock-names = "timerclk";
                                status = "disabled";
                        };
 
@@ -322,17 +348,22 @@
                                compatible = "nxp,lpc3220-timer";
                                reg = <0x40030000 0x1000>;
                                interrupts = <0x4 0>;
+                               clocks = <&clk LPC32XX_CLK_TIMER5>;
+                               clock-names = "timerclk";
                                status = "disabled";
                        };
 
                        watchdog: watchdog@4003C000 {
                                compatible = "nxp,pnx4008-wdt";
                                reg = <0x4003C000 0x1000>;
+                               clocks = <&clk LPC32XX_CLK_WDOG>;
                        };
 
                        timer0: timer@40044000 {
                                compatible = "nxp,lpc3220-timer";
                                reg = <0x40044000 0x1000>;
+                               clocks = <&clk LPC32XX_CLK_TIMER0>;
+                               clock-names = "timerclk";
                                interrupts = <0x10 0>;
                        };
 
@@ -347,6 +378,7 @@
                                compatible = "nxp,lpc3220-adc";
                                reg = <0x40048000 0x1000>;
                                interrupts = <0x27 0>;
+                               clocks = <&clk LPC32XX_CLK_ADC>;
                                status = "disabled";
                        };
 
@@ -354,6 +386,7 @@
                                compatible = "nxp,lpc3220-tsc";
                                reg = <0x40048000 0x1000>;
                                interrupts = <0x27 0>;
+                               clocks = <&clk LPC32XX_CLK_ADC>;
                                status = "disabled";
                        };
 
@@ -361,6 +394,8 @@
                                compatible = "nxp,lpc3220-timer";
                                reg = <0x4004C000 0x1000>;
                                interrupts = <0x11 0>;
+                               clocks = <&clk LPC32XX_CLK_TIMER1>;
+                               clock-names = "timerclk";
                        };
 
                        key: key@40050000 {
@@ -374,18 +409,22 @@
                                compatible = "nxp,lpc3220-timer";
                                reg = <0x40058000 0x1000>;
                                interrupts = <0x12 0>;
+                               clocks = <&clk LPC32XX_CLK_TIMER2>;
+                               clock-names = "timerclk";
                                status = "disabled";
                        };
 
                        pwm1: pwm@4005C000 {
                                compatible = "nxp,lpc3220-pwm";
                                reg = <0x4005C000 0x4>;
+                               clocks = <&clk LPC32XX_CLK_PWM1>;
                                status = "disabled";
                        };
 
                        pwm2: pwm@4005C004 {
                                compatible = "nxp,lpc3220-pwm";
                                reg = <0x4005C004 0x4>;
+                               clocks = <&clk LPC32XX_CLK_PWM2>;
                                status = "disabled";
                        };
 
@@ -393,6 +432,8 @@
                                compatible = "nxp,lpc3220-timer";
                                reg = <0x40060000 0x1000>;
                                interrupts = <0x13 0>;
+                               clocks = <&clk LPC32XX_CLK_TIMER3>;
+                               clock-names = "timerclk";
                                status = "disabled";
                        };
                };