ixgbe: complete FCoE initialization from setapp() routine
authorJohn Fastabend <john.r.fastabend@intel.com>
Sat, 18 Jun 2011 07:39:52 +0000 (07:39 +0000)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Sat, 25 Jun 2011 07:15:24 +0000 (00:15 -0700)
Commit,

commit c8ca76ebc6e50752c5311b92bb9aef7edb324577
Author: John Fastabend <john.r.fastabend@intel.com>
Date:   Sat Mar 12 03:50:53 2011 +0000

    ixgbe: DCB, further cleanups to app configuration

Removed the getapp() routines from ixgbe because they are no
longer needed. It also allowed the set hardware routines to
use both IEEE 802.1Qaz app types and CEE app types. This
added code to do bit shifting in the IEEE case.

This patch reverts the checks and handles the IEEE case
from the setapp entry point. I prefer this because it
keeps the two paths from having to be aware of the DCB
mode. This resolves a bug where I missed setting the
selector bit in the IEEE spec value and left it in the
CEE value. Now that they are separate routines these types
of errors should not occur.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/ixgbe/ixgbe_dcb_nl.c

index bd2d75265389720dae49b49e8024380bce29f424..db659df6b50ef28c153bcf2d3b188ab95fce1459 100644 (file)
@@ -330,24 +330,20 @@ static void ixgbe_dcbnl_get_pfc_cfg(struct net_device *netdev, int priority,
 static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
 {
        struct ixgbe_adapter *adapter = netdev_priv(netdev);
+       int ret;
+#ifdef IXGBE_FCOE
        struct dcb_app app = {
                              .selector = DCB_APP_IDTYPE_ETHTYPE,
                              .protocol = ETH_P_FCOE,
                             };
        u8 up = dcb_getapp(netdev, &app);
-       int ret;
+#endif
 
        ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
                                 MAX_TRAFFIC_CLASS);
        if (ret)
                return DCB_NO_HW_CHG;
 
-       /* In IEEE mode app data must be parsed into DCBX format for
-        * hardware routines.
-        */
-       if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE)
-               up = (1 << up);
-
 #ifdef IXGBE_FCOE
        if (up && (up != (1 << adapter->fcoe.up)))
                adapter->dcb_set_bitmap |= BIT_APP_UPCHG;
@@ -678,18 +674,34 @@ static int ixgbe_dcbnl_ieee_setapp(struct net_device *dev,
                                   struct dcb_app *app)
 {
        struct ixgbe_adapter *adapter = netdev_priv(dev);
+       int err = -EINVAL;
 
        if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
-               return -EINVAL;
+               return err;
 
-       dcb_setapp(dev, app);
+       err = dcb_ieee_setapp(dev, app);
 
 #ifdef IXGBE_FCOE
-       if (app->selector == 1 && app->protocol == ETH_P_FCOE &&
-           adapter->fcoe.tc == app->priority)
-               ixgbe_dcbnl_set_all(dev);
+       if (!err && app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE &&
+           app->protocol == ETH_P_FCOE) {
+               u8 app_mask = dcb_ieee_getapp_mask(dev, app);
+
+               if (app_mask & (1 << adapter->fcoe.up))
+                       return err;
+
+               adapter->fcoe.up = app->priority;
+
+               if (netif_running(dev))
+                       dev->netdev_ops->ndo_stop(dev);
+
+               ixgbe_clear_interrupt_scheme(adapter);
+               ixgbe_init_interrupt_scheme(adapter);
+
+               if (netif_running(dev))
+                       dev->netdev_ops->ndo_open(dev);
+       }
 #endif
-       return 0;
+       return err;
 }
 
 static u8 ixgbe_dcbnl_getdcbx(struct net_device *dev)